Shifting Pathways in the Phenol/2-Propanol Conversion over the Tandem Raney Ni + ZSM-5 Catalytic System

Prediction of Retention Indices and Response Factors of Oxygenates for GC-FID by Multilinear Regression

The replacement of fossil carbon sources with green bio-oils promotes the importance of several hundred oxygenated hydrocarbons, which substantially increases the analytical effort in catalysis research. A multilinear regression is performed to correlate retention indices (RIs) and response factors (RFs) with structural properties. The model includes a variety of possible products formed during the hydrodeoxygenation of bio-oils with good accuracy (RRF2 0.921 and RRI2 0.975). The GC parameters are related to the detailed hydrocarbon analysis (DHA) method, which is commonly used for non-oxygenated hydrocarbons. The RIs are determined from a paraffin standard (C5–C15), and the RFs are calculated with ethanol and 1,3,5-trimethylbenzene as internal standards. The method presented here can, therefore, be used together with the DHA method and be expanded further. In addition to the multilinear regression, an increment system has been developed for aromatic oxygenates, which further improves the prediction accuracy of the response factors with respect to the molecular constitution (R2 0.958). Both predictive models are designed exclusively on structural factors to ensure effortless application. All experimental RIs and RFs are determined under identical conditions. Moreover, a folded Plackett–Burman screening design demonstrates the general applicability of the datasets independent of method- or device-specific parameters.

The Effect of Ni-ZSM-5 Catalysts on Catalytic Pyrolysis and Hydro-Pyrolysis of Biomass

With the demand of energy and re-utilization of wastes, the renewable lignocellulosic biomass, has attracted increasing and significant attention for alleviating the growing energy crisis and environment problems. As main components of lignocellulosic biomass, lignin, cellulose, and hemicellulose are connected by hydrogen bond to form a compact skeleton structure, resulting the trenchant condition of biomass pyrolysis. Also, pyrolysis products of above three main constituents contain a large amount of oxygenates that cause low heating value, high corrosiveness, high viscosity, and instability. Meanwhile, zeolites are of considerable significance to the conversion of lignocellulosic biomass to desirable chemical products on account of fine shape selectivity and moderate acid sites and strength. Among numerous zeolites, ZSM-5-based catalysts have been most extensively studied, and the acidity and porosity of ZSM-5 can be tuned by changing the content of Si or Al in zeolite. Beyond that, doping of other metal elements, such as Mn, Co, Ni, Ga, Ce, Pt, into ZSM-5 is also an efficient way to regulate the strength and density of acid sites in zeolite precisely. This review focused on the recent investigation of Ni-modified microporous ZSM-5 used in catalytic pyrolysis of lignin and cellulose. The application of metal-modified hierarchical ZSM-5 is also covered.