Intriguing pH-modulated Luminescence Chameleon System based on Postsynthetic Modified Dual-emitting Eu3+@Mn-MOF and Its Application for Histidine Chemosensor

Design and synthesis of a new highly efficient adjustable Ln-MOF for fluorescence sensing and information encryption

Elemental analysis, infrared spectroscopy, and X-ray single crystal diffraction indicated that a novel metal-organic framework (Tb-MOF) designated as 0.5n[H2bpy]·[Tb(dpa)(H2O)2]n·4nH2O was synthesized successfully, (where H4dpa = 5-(3, 4-dicarboxy- phenoxy) isophenic acid, bpy = protonated 4,4'-bipyridine). Tb-MOF adopts a 3D network structure based on TbIII ions and the (dpa)4- ligand through µ4: η1, η2, η2, η2 binding modes. Various luminescent EuxTb1-x-MOFs were prepared by adjusting Tb3+ and Eu3+ concentrations. Fluorescence analysis revealed Tb-MOF's strong fluorescence and excellent sensing ability for pollutants like nitrobenzene (NB), ornidazole (ORN), and fluridine (Flu) in water. It is worth noting that the fluorescence quenching rate of Tb-MOF for nitrobenzene can reach 97.1 %, which is also one of the highest among Ln-MOFs. XPS, LUMO orbital energy levels, fluorescence lifetime, and UV absorption were employed to explore the fluorescence quenching mechanism. Tb-MOF demonstrates robust anti-counterfeiting properties and stability, particularly against Flu, and allows rapid in situ imaging of pesticide residues on vegetables. Moreover, leveraging the adjustable emission spectra of EuxTb1-x-MOF, a barcode system for anti-counterfeiting labels has been developed, showing the versatility of stable metal-organic frameworks in advanced technologies for anti-counterfeiting applications.

Evaluation of the Potential of a Ratiometric Fluorescence Sensor for Sensitively Recognizing 1-Hydroxypyrene in Real Urine Samples Based on a Stable Zn-MOF

In the work, a 3D Zn-based MOF, [CH3(NH2)2][Zn2(obdb)(OH)]·DMF (compound 1) has been formed successfully through the self-assembly of Zn(II) ion and organic linker H4obdb (4',4‴-oxybis[1,1'-biphenyl]-3,5-dicarboxylic acid, a high-symmetrical tetra-carboxylate ligand) under solvothermal conditions. In the structure of compound 1, Zn and the symmetry-generated ones constitute a tetra-nuclear cluster [Zn4(μ2-COO)8(μ3-OH)2], and then by the coordination of tetra-nuclear clusters and the organic linkers, a 3D stair-like framework containing a 1D rectangular channel with the porosity of 47.3% is generated. Interestingly, compound 1 is confirmed to possess striking air and pH stability. Noteworthily, the results of detecting studies certify that compound 1 can serve as a prospective ratiometric fluorescence sensor for selectively recognizing 1-hydroxypyrene (1-HP) among diverse urine components and a promising fluorescence probe for Asp from other 11 kinds of amino acids depended on "turn-off" effects decorated with high quenching efficiencies (97.5% for 1-HP and 94.3% for Asp) and outstanding sensitivity with Ksv values of 1.84 × 105 M-1 for 1-HP and 1.41 × 104 M-1 for Asp in a DMF-H2O binary system. Amazingly, the sensing capacities of compound 1 maintain similar levels in fresh human urine compared with those in the DMF-H2O binary system, giving the Ksv values of 5.79 × 104 M-1 for 1-HP and 1.72 × 104 M-1 for Asp.

A Stable Zn(II) Metal-Organic Framework as Turn-On and Blue-Shift Fluorescence Sensor for Amino Acids and Dipicolinic Acid in Living Cells or Using Aerosol Jet Printing

Amino acids and dipicolinic acid (DPA) are important biomarkers for identifying human health. Establishing rapid, accurate, sensitive, and simple assays is essential for disease prevention and early diagnosis. In this work, a novel Zn(II) metal-organic framework (MOF) with the formula {[Zn5(μ3-OH)2(BTDI)2(dpp)2]·dpp·4H2O·2DMF}n (JXUST-53, where JXUST denotes Jiangxi University of Science and Technology, H4BTDI = 5,5'-(benzo[c][1,2,5]thiadiazole-4,7-diyl)diisophthalic acid; dpp = 1,3-di(4-pyridyl)propane) was successfully synthesized via a mixed-ligands strategy. JXUST-53 exhibits a three-dimensional (4,10)-connected deh1 topological structure, which remains stable after soaking in aqueous solutions with different pH values (1-12) and organic solvents for at least 24 h, showing high chemical and pH stability. As a potential fluorescence sensor, JXUST-53 can specifically recognize l-threonine (l-Thr), l-histidine (l-His), and DPA in EtOH solutions through fluorescence enhancement and a blue-shift effect. It is worth noting that JXUST-53 is the first MOF-based fluorescence sensor capable of recognizing l-Thr. In addition, the university logo of JXUST with JXUST-53 deposited on it was printed by aerosol jet printing technology, enabling a portable and convenient method for monitoring DPA. More importantly, JXUST-53 has good biocompatibility and low cytotoxicity to sense l-Thr, l-His, and DPA in living cells.

An exceptional water stable terbium-based metal-organic framework for selective detection of pesticides

A terbium-based metal-organic framework (MOF) with exceptional water stability for highly selective detection of pesticide thiamethoxam (TMX) in aqueous solution is reported. To date, most reported lanthanide metal-organic frameworks (Ln-MOFs) still exhibit poor water stability, which may limit their practical applications in bio-sensing and detecting pollutants in environmental water samples. In this work, a Tb-MOF [Tb(BDC)1.5(DEF)·0.5H2O] n (1, BDC = 1,4-benzene dicarboxylate, DEF = N,N-diethylformamide) was prepared by hydrothermal reactions of 1,4-benzenedicarboxylic acid with the corresponding rare earth ions of Tb3+. Impressively, water stability surveys of compound 1 indicated that it maintained at least 90% of its emission intensity after storage in water for several months. This characteristic of long water stability is unusual as compared to other Ln-MOFs, making compound 1 an excellent candidate for sensing applications in the aqueous phase. In particular, the green emission of compound 1 could be quenched by the pesticide thiamethoxam (TMX), which was attributed to both the static and dynamic quenching processes based on an upward-curving Stern-Volmer plot. The quenching mechanism was speculatively attributed to the inner filter effect combined with the complex formation based on the electrostatic interaction of compound 1 and TMX, resulting in the promotion of the quenching efficiency. Finally, compound 1 was demonstrated to detect TMX in aqueous solution with rapid response and high selectivity.

A DMSO-assisted iridium(III) complex as a luminescent "turn-on" sensor for selective detection of L-histidine and bacterial imaging

Histidine (His) is a semi-essential amino acid and a unique key neurotransmitter involved in numerous physiological processes. An excessive or deficient amount of His in the body can lead to various related diseases. However, since the chemical structures of L-His and its metabolites (such as histamine (Ha), imidazole-4-acetate (ImA), etc.) are very similar, simple and efficient selective detection of L-His and its related metabolites is of great importance but remains a great challenge. Herein, we successfully designed and synthesized a DMSO-assisted iridium(III) complex (Ir1-DMSO), which can be applied as a "turn-on" photoluminescence (PL) probe for the selective detection and quantification of L-His/Ha. More importantly, Ir1-DMSO exhibited good sensitivity, high selectivity, and anti-interference capability for L-His/Ha/His-containing proteins, which is advantageous due to its simple fabrication and low technical demands. This was attributed to the reaction of Ir1-DMSO with imidazole and amino groups of L-His/Ha. Furthermore, we show the utility of Ir1-DMSO as a PL imaging agent in cultures of E. coli and S. aureus. Considering its diversity of composition and structural flexibility, it can be extended to other solvents and Ir-ligand complexes for various analyses based on specific molecular recognition sensing platforms.

Luminescent Ln-MOFs for Chemical Sensing Application on Biomolecules

At present, the application of rare-earth organic frameworks (Ln-MOFs) in fluorescence sensing has entered rapid development and shown great potential in various analytical fields, such as environmental analysis, food analysis, drug analysis, and biological and clinical analysis by utilizing their internal porosity, tunable structural size, and energy transfer between rare-earth ions, ligands, and photosensitizer molecules. In addition, because the luminescence properties of rare-earth ions are highly dependent on the structural details of the coordination environment surrounding the rare-earth ions, and although their excitation lifetimes are long, they are usually not burst by oxygen and can provide an effective platform for chemical sensing. In order to further promote the development of fluorescence sensing technology based on Ln-MOFs, we summarize and review in detail the latest progress of the construction of Ln-MOF materials for fluorescence sensing applications and related sensor components, including design strategies, preparation methods, and modification considerations and initially propose the future development prospects and prospects.

Bacterial Cellulose-Based MOF Hybrid as a Sensitive Switch Off-On Luminescent Sensor for the Selective Recognition of l-Histidine

In this study, a stable and luminescent UiO-66-NH2 (UN) and its derivative Cu2+@UN were prepared and utilized successfully as an Off-On luminescent sensing platform for effective, selective, as well as rapid (5 min) detection of l-Histidine (l-His). The UN reveals efficient quenching in the presence of Cu2+ ions through photoinduced electron transition (PET) mechanism as a dynamic quenching process (in the range of 0.01-1 mM) forming Cu2+@UN sensing platform. However, due to the remarkable affinity between l-His and Cu2+, the luminescence of Cu2+@UN is recovered in the presence of l-His indicating Turn-On behavior via a quencher detachment mechanism (QD). A good linear relationship between the l-His concentration and luminescence intensity was observed in the range of 0.01-40 μM (R2 = 0.9978) with a detection limit of 7 nM for l-His sensing. The suggested method was successfully utilized for l-His determination in real samples with good recoveries and satisfying consequences. Moreover, the result indicates that only l-His induces a significant luminescence restoration of Cu2+@UN and that the signal is significantly greater than that of the other amino acids. Also, the portable test paper based on bacterial cellulose (BC) as the Cu2+@UNBC sensing platform was developed to conveniently evaluate the effective detection of l-His.

Exfoliation of a Coordination Polymer Based on a Linear π-Conjugated Ligand into an Ultrathin Nanosheet for Glyphosate Sensing

Owing to the large-scale consumption of pesticides and their potential threats to the environment and human health, the development of sensing materials for pesticides has attracted considerable attention in recent years. In this work, a novel Cd(II)-based coordination polymer (CP) with the formula [Cd(H2O)2(L)]·DMF (Cd-1, DMF = N,N-dimethylformamide, H2L = 4,4'-[(2,5-dimethoxy-1,4-phenylene)di-2,1-ethenediyl]bis-benzoic acid) was synthesized under solvothermal conditions. Structural analysis revealed that coordination between central Cd2+ cations and the ligand L2- formed two-dimensional (2D) networks, which were further assembled by noncovalent hydrogen bonds into a three-dimensional (3D) supramolecular framework. Through ultrasonic treatment in isopropyl alcohol, Cd-1 was exfoliated to afford an ultrathin CP-based 2D nanosheet (Cd-1-NS) with a thickness of less than 1.8 nm. Compared to the bulk materials, the prepared Cd-1-NS exhibited enhanced fluorescence emission properties and superior sensing performance toward glyphosate (Glyph) in water with high selectivity, sensitivity, anti-interference, fast response, and good recyclability via the turn-off effect. The limit of detection (LOD) of Cd-1-NS for Glyph was as low as 41 nM (7 ppb) in the low-concentration range of 0-2.4 μM. In addition, the Cd-1-NS also showed excellent practicability and reliability for the detection of Glyph in real samples, including lake water, tap water, cabbage, and watermelon skin, and could realize the rapid visualized sensing of Glyph residues on the surfaces of vegetables and fruits.

Terbium doping and energy level modification of zirconium organic frameworks as probes for the improved determination of histamine and visual inspection of food freshness

Food safety is a common concern among people, and the development of high-performance food freshness detection technology is crucial, but is still highly challenging. Fluorescent sensing based on metal organic frameworks is a promising technology to tackle this issue. In this work, three UiO-66 type Zirconium organic frameworks (ZrOFs) which are functionalized with varying numbers of hydroxyl groups to alter the energy levels, and partial replacement of Zirconium(IV) by Terbium(III) ions to introduce additional emitting centers, were explored as probes for the sensing of Histamine (His). With one hydroxyl group introduced, UiO-66-OH@Tb can be developed as ratiometric fluorescent probe with improved sensing performance, showing a wide detection range of 0 to 120 mg/L, and a low detection limit of 0.13 mg/L. UiO-66-OH@Tb can also be fabricated into composite film to function as visual sensing material of His. This work can provide instructions for the development of other fluorescent sensors.

The construction of dual-emissive ratiometric fluorescent probes based on fluorescent nanoparticles for the detection of metal ions and small molecules

With the rapid development of fluorescent nanoparticles (FNPs), such as CDs, QDs, and MOFs, the construction of FNP-based probes has played a key role in improving chemical sensors. Ratiometric fluorescent probes exhibit distinct advantages, such as resistance to environmental interference and achieving visualization. Thus, FNP-based dual-emission ratiometric fluorescent probes (DRFPs) have rapidly developed in the field of metal ion and small molecule detection in the past few years. In this review, firstly we introduce the fluorescence sensing mechanisms; then, we focus on the strategies for the fabrication of DRFPs, including hybrid FNPs, single FNPs with intrinsic dual emission and target-induced new emission, and DRFPs based on auxiliary nanoparticles. In the section on hybrid FNPs, methods to assemble two types of FNPs, such as chemical bonding, electrostatic interaction, core satellite or core-shell structures, coordination, and encapsulation, are introduced. In the section on single FNPs with intrinsic dual emission, methods for the design of dual-emission CDs, QDs, and MOFs are discussed. Regarding target-induced new emission, sensitization, coordination, hydrogen bonding, and chemical reaction induced new emissions are discussed. Furthermore, in the section on DRFPs based on auxiliary nanoparticles, auxiliary nanomaterials with the inner filter effect and enzyme mimicking activity are discussed. Finally, the existing challenges and an outlook on the future of DRFP are presented. We sincerely hope that this review will contribute to the quick understanding and exploration of DRFPs by researchers.

Yolk-shell composite optical sensors with chiral L-histidine/Rhodamine 6G for high-sensitivity "turn-on" detection of L-proline

Chirality is a ubiquitous phenomenon in nature and has attracted wide attention in the biomedicine, pharmaceutics and biosensing research fields. Enantiomeric recognition of chiral compounds, especially chiral drugs and chiral amino acids, is important for human health and nutrition. In this work, through the encapsulation of L-His&R6G (L-His = L-Histidine; R6G = Rhodamine 6G) into MOF@MOF framework ZIF-67@ZIF-8, composited material L-His&R6G@ZIF-67@ZIF-8 can be obtained. Additionally, through the etching process, a unique yolk-shell ZIF-8 chiral composite optical sensors L-His&R6G@ZIF-8 (1) can be successfully prepared. Photo-luminescent (PL) experiment also reveals that 1 can highly sensitively detect L-Proline (L-Pro) through the "turn-on" detection strategy (KBH = 1.22 × 104 M-1 and detection limit 1.9 μM). Further yolk-shell L-His&R6G@ZIF-8-based fabricate flexible mixed-matrix membranes has been prepared using doctor-blading technique, which show significant fluorescence enhancement effect under ultraviolet lamp. This work also provides the unique example of preparing chiral yolk-shell framework composite sensors, which have broad application in chiral sensing area.

A pH-Stable Tb-MOF as Luminescence Sensor for Highly Sensitive Detection of Amino Acids through Diverse Sensing Mechanism

A luminescent Tb-MOF with excellent stability and dual-emitting properties was constructed with an amide-functionalized tetracarboxylate ligand. Tb-MOFs were initially assembled on one-dimensional Tb3+ chains, then formed a two-dimensional double-decker layer through the synergistic linking of organic ligands and bridging formic acid anions, and further fabricated the final three-dimensional structure through the connection of the organic ligands. Powder X-ray diffraction experiments revealed that Tb-MOFs not only exhibited excellent stability in water but also maintained structural integrity in the pH range of 2-12. Importantly, this Tb-MOF provided the first example of a metal-organic framework (MOF)-based luminescence sensor that can simultaneously detect two acid amino acids (aspartic and glutamic acids) through a turn-off sensing mechanism and two basic amino acids (lysine and arginine acids) through unusual turn-on and turn-off-on sensing mechanisms. Moreover, high sensitivity, low detection limit, and excellent recyclability of this sensor endow Tb-MOFs with great potential as a highly efficient amino acid fluorescence sensor in chemical detection and biological environments.

Solvent-induced luminescence behavior of NH2-MIL-53(Fe) in H2O and D2O: a potential approach for D2O detection

An anomalous solvent-induced luminescence quenching of NH2-MIL-53(Fe) in D2O is reported. Contrary to conventional understanding, the quenching is originated from the inhibition of charge transfer by hydrogen bonding between NH2-MIL-53(Fe) and D2O, rather than protonation or high-frequency vibrations of solvent molecules. This enables accurate quantitative detection towards specific volume fractions of D2O in H2O.

Chiral dual-emission composite material fluorescein/CCQDs @ZIF-8 for highly efficient recognition of phenylenediamine isomers and their oxidized product

As a new type of fluorescent nanomaterial, chiral carbon quantum dots (CCQDs) have the advantages of wide source, good water solubility and high chemical stability, and have been widely used in drug detection, bioimaging and chemical sensing. In this work, a chiral dual-emission hybrid material fluorescein/CCQDs@ZIF-8 (1) was synthesized by in-situ encapsulation strategy. Luminescence emission position of CCQDs and fluorescein are almost unchanged after the encapsulation into ZIF-8. The luminescent emissions of CCQDs and fluorescein can be observed to be located at 430 nm and 513 nm, respectively. When 1 is soaked in pure water, ethanol, dimethylsulfoxide, DMF, DMA and targeted substances solution for 24 h, 1 can maintain its structural stability. Photo-luminescent (PL) studies show that 1 can discriminate p-phenylenediamine (PPD) from m-phenylenediamine (MPD) and o-phenylenediamine (OPD), which can detect the presence of PPD with high sensitivity and selectivity (ratiomeric fluorescent probe with K_BH: 1.85 × 10³ M^-1 and detection limit: 8.51 μM). Further, 1 also effectively distinguish the oxidized product of these phenylenediamine(PD) isomers. 1 can be used as a "turn-off" fluorescent probe to detect oxidized product of PPD (ratiomeric fluorescent probe with K_SV: 6.82 × 10² M^-1 and detection limit: 0.112 mM) and a "turn-on" fluorescent probe to detect oxidized product of MPD (ratiomeric fluorescent probe: K_BH: 1.65 × 10³ M^-1 and detection limit: 35.03 μM) and oxidized product of OPD (ratiomeric fluorescent probe: K_BH: 2.40 × 10⁶ M^-1 and detection limit: 0.105 μM). Further, for the convenience of practical application, 1 can be developed as fluorescence ink and be prepared into a mixed matrix membrane. When the target substances are gradually added to the membrane, significant luminescence change with obvious color change can be observed.

Near-infrared magnetic core-shell nanoparticles based on lanthanide metal-organic frameworks as a ratiometric felodipine sensing platform

Felodipine is an effective drug to treat hypertension, but its abuse can cause bardycardia. It is significant to develop highly sensitive detection platform for felodipine to enable the efficient treatment of hypertension diseases. In this work, to highly efficiently detect felodipine, multi-emission near-infrared (NIR) hierarchical magnetic core-shell lanthanide-MOF nanoparticles, namely Nd-MOF@Yb-MOF@SiO₂@Fe₃O₄ (NIR-1), has been synthesized by layer-by-layer (LBL) method. LBL method can adjust the optical properties of NIR-1 and expose more active sites to improve sensitivity in detection process. NIR-1 has near-infrared luminescence emission, which can efficiently avoid the interference of autofluorescence in biological tissues. Photo-luminescent (PL) experiments also reveal that NIR-1 could be used as a near-infrared ratiometric luminescent sensor for felodipine detection with high selectivity and sensitivity, the low of detection limit (LOD) is 6.39 nM in felodipine detection, which is also performed using real biological samples. In addition, NIR-1 can be used as a ratiometric thermometer could also be applied in the temperature sensing from 293 K to 343 K. Finally, detection mechanisms for felodipine and temperature sensing performance based on near-infrared (NIR) emission were also investigated and discussed in detail.

Luminescent Guests Encapsulated in Metal-Organic Frameworks for Portable Fluorescence Sensor and Visual Detection Applications: A Review

Metal-organic frameworks (MOFs) have excellent applicability in several fields and have significant structural advantages, due to their open pore structure, high porosity, large specific surface area, and easily modifiable and functionalized porous surface. In addition, a variety of luminescent guest (LG) species can be encapsulated in the pores of MOFs, giving MOFs a broader luminescent capability. The applications of a variety of LG@MOF sensors, constructed by doping MOFs with LGs such as lanthanide ions, carbon quantum dots, luminescent complexes, organic dyes, and metal nanoclusters, for fluorescence detection of various target analyses such as ions, biomarkers, pesticides, and preservatives are systematically introduced in this review. The development of these sensors for portable visual fluorescence sensing applications is then covered. Finally, the challenges that these sectors currently face, as well as the potential for future growth, are briefly discussed.

Detection of different chemical moieties in aqueous media by luminescent Europium as sensor

Detection of different chemical moieties especially trace metals is important for humans as well as water safety. In this review, different detectors synthesized by the combination of different ligands with luminescent europium complexes were discussed for the separation of metals and chemical moieties in aqueous media. These detectors displayed high sensitivity and selectivity. The limit-of-detection values were very low indicating that these detectors are best suitable for the sensing of chemical moieties and trace metals. These detectors’ luminescent changes could be noticed with the naked eye.

A new mode of luminescence in lanthanide oxalates metal–organic frameworks

Two lanthanide metal–organic frameworks [Ln-MOFs, Ln = Eu(III), Tb(III)] composed of oxalic acid and Ln building units were hydrothermally synthesized and fully characterized by powder X-ray diffraction, Fourier-transform infrared spectroscopy, thermogravimetric analysis, scanning electron microscope, and energy-dispersive X-ray spectroscopy. Furthermore, their magnetic susceptibility measurements were obtained using SQUID based vibrating sample magnetometer (MPMS 3, Quantum Design). Both Ln-MOFs exhibited highly efficient luminescent property. Solid-state photoluminescence (PL) measurements revealed phosphorescence emission bands of Eu-MOF and Tb-MOF centered at 618 nm (red emission) and 550 nm (green emission) upon excitation at 396 nm and 285 nm, respectively. Eu-MOF and Tb-MOF displayed a phosphorescence quantum yield of 53% and 40%, respectively. Time-resolved PL analyses showed very long lifetime values, at 600 and 1065 ± 1 µs for Eu-MOF and Tb-MOF, respectively. Calculations performed by density functional theory indicated a charge transfer form metal centres to the ligand which was in good agreement with the experimental studies. Therefore, this new mode of highly photoluminescent MOF materials is studied for the first time which paves the way for better understanding of these systems for potential applications.

An Overview of the Design of Metal-Organic Frameworks-Based Fluorescent Chemosensors and Biosensors

Taking advantage of high porosity, large surface area, tunable nanostructures and ease of functionalization, metal-organic frameworks (MOFs) have been popularly applied in different fields, including adsorption and separation, heterogeneous catalysis, drug delivery, light harvesting, and chemical/biological sensing. The abundant active sites for specific recognition and adjustable optical and electrical characteristics allow for the design of various sensing platforms with MOFs as promising candidates. In this review, we systematically introduce the recent advancements of MOFs-based fluorescent chemosensors and biosensors, mainly focusing on the sensing mechanisms and analytes, including inorganic ions, small organic molecules and biomarkers (e.g., small biomolecules, nucleic acids, proteins, enzymes, and tumor cells). This review may provide valuable references for the development of novel MOFs-based sensing platforms to meet the requirements of environment monitoring and clinical diagnosis.

Anionic lanthanide metal-organic frameworks with magnetic, fluorescence, and proton conductivity properties and selective adsorption of a cationic dye

Two novel microporous anionic lanthanide metal-organic frameworks (Ln-MOFs), namely {[(CH₃)₂NH₂][Ln(bptc)]·2H₂O}_n (Ln = Gd (1) and Dy (2), H₄bptc = biphenyl-3,3',5,5'-tetracarboxylic acid) with a new 4,8-connected topology have been synthesized and structurally characterized. Ln-MOF 1 shows a significant magnetocaloric effect with -ΔSmaxm = 26.37 J kg^-1 K^-1 at 2 K for ΔH = 7 T, and a high proton conductivity of 1.02 × 10^-4 S cm^-1 at 323 K and 90% RH. Moreover, Ln-MOF 1 shows specific selective adsorption of the cationic dye Rhodamine B. Ln-MOF 2 exhibits field-induced slow magnetic relaxation with an energy barrier (U_eff) of 48.19 K, characteristic emission of Dy³⁺, and selective adsorption of Rhodamine B. Therefore, 2 is a multifunctional Ln-MOF with magnetic, fluorescence and selective adsorption properties.

Chiral Luminescent Sensor Eu-BTB@d-Carnitine Applied in the Highly Effective Ratiometric Sensing of Curing Drugs and Biomarkers for Diabetes and Hypertension

Chiral drugs are of great significance in drug development and life science because one pair of enantiomers has a different combination mode with target biological active sites, leading to a vast difference in physical activity. Metal-organic framework (MOF)-based chiral hybrid materials with specific chiral sites have excellent applications in the highly effective sensing of drug enantiomers. Sitagliptin and clonidine are effective curing drugs for controlling diabetes and hypertension, while insulin and norepinephrine are the biomarkers of these two diseases. Excessive use of sitagliptin and clonidine can cause side effects such as stomach pain, nausea, and headaches. Herein, through post-synthetic strategy, MOF-based chiral hybrid material Eu-BTB@d-carnitine (H₃BTB = 1,3,5-benzenetrisbenzoic acid) was synthesized. Eu-BTB@d-carnitine has dual emission peaks at 417 and 616 nm when excited at 330 nm. Eu-BTB@d-carnitine can be applied in luminescent recognition toward sitagliptin and clonidine with high sensitivity and low detection limit (for sitagliptin detection, K_sv is 7.43 × 10⁶ [M^-1]; for clonidine detection, K_sv is 9.09 × 10⁶ [M^-1]; limit of detection (LOD) for sitagliptin is 10.21 nM, and LOD of clonidine is 8.34 nM). In addition, Eu-BTB@d-carnitine can further realize highly sensitive detection of insulin in human fluids with a high K_sv (2.08 × 10⁶ [M^-1]) and a low LOD (15.48 nM). On the other hand, norepinephrine also can be successfully discriminated by the hybrid luminescent platform of Eu-BTB@d-carnitine and clonidine with a high K_sv value of 4.79 × 10⁶ [M^-1] and a low LOD of 8.37 nM. As a result, the chiral hybrid material Eu-BTB@d-carnitine can be successfully applied in the highly effective ratiometric sensing of curing drugs and biomarkers for diabetes and hypertension.

Turn-on and blue-shift fluorescence sensor toward L-histidine based on stable CdII metal-organic framework with tetranuclear cluster units

A novel Cd^II-based two-fold interpenetrated metal-organic framework (MOF), namely {[Cd₂(BTDB)₂(4,4-bpy)]·DMF}_n (JXUST-14), (H2BTDB = 4,4'-(benzo[c][1,2,5]thiadiazole-4,7-diyl)dibenzoic acid and 4,4-bpy = 4,4-bipyridine), has been prepared and characterized. Single-crystal structure determination reveals that JXUST-14 has a tetranuclear cluster based 6-connected pcu topological network with Schlafli symbol {4¹²·6³}. When soaked in common organic solvents and aqueous solutions with diverse pH values of 2-12 for 48 h, JXUST-14 remains stable. JXUST-14 is a highly selective and sensitive luminescent sensor for L-histidine (His) with a detection limit of 11.1 ppm. JXUST-14 is the first Cd^II-based MOF for the detection of His via turn-on and fluorescence blue-shift effects. Experimental study and theoretical calculation suggest that the sensing process can be mainly attributed to a charge transfer and energy transfer mechanism. More interestingly, LED lamps of JXUST-14 and JXUST-14@His were successfully developed, which endowed efficient sensitivity for His detection and thus provide great potential for future applications.

Multi-Emission from Single Metal-Organic Frameworks under Single Excitation

Multi-emission materials have come to prominent attention ascribed to their extended applications other than single-emission ones. General and robust design strategies of a single matrix with multi-emission under single excitation are urgently required. Metal-organic frameworks (MOFs) are porous materials prepared with organic ligands and metal nodes. The variety of metal nodes and ligands makes MOFs with great superiority as multi-emission matrices. Guest species encapsulated into the channels or pores of MOFs are the additional emission sites for multi-emission. In this review, multi-emission MOFs according to the different excitation sites are summarized and classified. The emission mechanisms are discussed, such as antenna effect, excited-state intramolecular proton transfer (ESIPT) and tautomerism for dual-emission. The factors that affect the emissions are revealed, including ligand-metal energy transfer and host-guest interaction, etc. Multi-emission MOFs could be predictably designed and prepared, once the emissive factors are controlled rationally in combination with the different multi-emission mechanisms. Correspondingly, new and practical applications are realized, including but not limited to ratiometric/multi-target sensing and bioimaging, white light-emitting diodes, and anti-counterfeiting. The design strategies of multi-emission MOFs and their extensive applications are reviewed. The results will shed light on other multi-emission systems to develop the structure-derived functionality and applications.

A versatile enrichment of functionalized calixarene as a facile sensor for amino acids

Amino acids have become the most important part of the human biological system due to their roles in the living processes. Role of amino acids stretches beyond their traditional role as a building block for proteins, deficiency of the same could lead to decreased immunity, digestive problems, depression, fertility issues, lower mental alertness, slowed growth in children, and many other health issues. The acute detection of amino acids is necessary to determine the human health domain. Here in this review, we summarize and study the calixarenes as a complex detailed being of an immeasurable value and its utilization for the amino acids' detection. The key factors responsible such as noncovalent forces, LOD and supramolecular chemistry of calixarenes with amino acids are described well. This study presents the most recent efforts made for the development of potential and highly efficient calixarene based sensors for the detection of amino acids.

Stable bifunctional ZnII-based sensor toward acetylacetone and L-histidine by fluorescence red shift and turn-on effect

A new coordination polymer [Zn(bbip)(NH2-BDC)]n (JXUST-15, bbip = 2,6-bis(benzimidazol-1-yl)pyridine and NH2-H2BDC = 2-aminoterephthalic acid) has been synthesized by mixed ligand strategy. The structure analysis shows that JXUST-15 takes a two-dimensional...

Full-Color Emission in Multicomponent Metal-Organic Frameworks via Linker Installation

Herein, we demonstrate that linker installation (LI) through postsynthesis is an effective strategy to insert emissive second linkers into single-linker-based metal-organic frameworks (MOFs) to tune the emission properties of multicomponent MOFs. Full-color emission, including white-light emission, can be achieved via such a LI process.

Anion-controlled Zn(II) coordination polymers with 1-(tetrazo-5-yl)-3-(triazo-1-yl) benzene as an assembling ligand: synthesis, characterization, and efficient detection of tryptophan in water

Tryptophan regulates and participates in various physiological systems in the human body, and its excessive intake has harmful effects. Therefore, detecting and monitoring tryptophan in water and distinguishing it from other amino acids are necessary. In addition to their excellent luminescence, coordination polymer-based sensors have good stability and high sensitivity and selectivity for sensing applications. In this work, two luminescent coordination polymers (CPs), [Zn(ttb)Cl]_n (1) and [Zn₂(ttb)₂(OH)(NO₃)]_n (2), were obtained through the solvothermal reaction of different Zn(II) salts with a rarely studied multidentate N-donor ligand, 1-(tetrazo-5-yl)-3-(triazo-1-yl) benzene (Httb). Crystallographic investigations revealed that the structure of 1 exhibits a 2D fes net with Cl^- anions acting as terminal charge balancers, and that of 2 features a 3D ant net with NO₃^- anions in a rare monodentate bridging (μ₂-O-η¹:η¹) mode. In terms of stability tests, 2 has better thermal and water stability than 1. Although both show good fluorescence performance, specific tryptophan detection, and excellent anti-interference ability, 2 has higher K_SV (111 852.6 M^-1), a lower limit of detection (LOD = 23.6 nM), and a better recovery rate than 1. Cytotoxicity experiments proved that 2 has extremely low toxicity and thus has great potential for in vivo detection. Therefore, CP 2 is a suitable candidate for advanced practical applications for the efficient sensing of tryptophan in water. The luminescence of the ligands was also calculated using DFT theory and further discussed through experiments. The quenching mechanism that occurs after tryptophan addition was explored through Hirshfeld surface analysis.

pH modulated luminescent switching and discriminative detection of amino acid based on metal-organic framework

The detection of glutamic (Glu) or aspartic (Asp) acids is vital for human nutrition and diagnosis of disease. Herein, the dht ligand containing hydroxy group (-OH) is used to design and synthesize a 2D luminescent [Cd₂(idc)(dht)(H₂O)₄] (1); H₂idc = 4,5-imidazoledicarboxylic acid and H₂dht = 2,5-dihydroxyterephthalic acid for sensing amino acids. The compound 1 can discriminatively detect Asp and Glu among other amino acids through blue-shifted emission (yellow → green). The dual sensing mechanism may be attributed to the intermolecular excited-state proton transfer between MOF and water to produce keto form along with the subsequent switching of keto form to enol form by protonation causing the increased band gap energy. This material can serve several benefits in terms of high selectivity, fast response (30s), good reproducibility and low LOD value of 11.34 μM which is less than the harmful concentration of Glu for human health (>400 μM). In addition, 1 shows the broad range detection of Glu covering in safe and unsafe levels. For on-site detection of Glu, MOF-based paper is devised and can be applied through color-scanning application in smartphone. Besides, this sensor can serve to detect Glu in real samples with good recovery.

An AIE material with time-dependent luminescence conversion obtained by 2D coordination polymer modification via covalent post-synthetic modification

In this study, we reported the covalent post-synthetic modification (PSM) of a luminescent complex to achieve aggregation-induced emission (AIE), prepared using the Schiff base reaction of TPE-CHO and HLC-NH2, denoted by HLC-NH2-TPE. HLC-NH2 formed a 2D luminescent complex which was constructed using 4,4'-diamino-[1,1'-biphenyl]-2,2'-dicarboxylic acid and zinc ions via a solvothermal reaction. HLC-NH2-TPE inherited the luminescence properties of HLC-NH2 and exhibited noticeable AIE properties in response to environmental viscosities and temperature changes. Interestingly, HLC-NH2-TPE displayed a time-dependent luminescence conversion phenomenon in a mixed solution of DMF/H₂O (v : v/1 : 9).

Fabricating multifunctional low-toxicity ratiometric fluorescent probe for individual detection of Cu2+/glutamate and continuous sensing for glutamate via Cu2+-based platform

Herein, a multifunctional ratiometric fluorescent (RF) probe Fe-MIL-88NH₂@RhB was fabricated for individual detection of Cu^2+/Glu and continuous sensing of Glu based on unique coordination principle by encapsulating RhB into the porous of metal-organic-framework-Fe-MIL-88NH₂. Designed Fe-MIL-88NH₂@RhB platform could selectively identify Cu(II)/Glu accompanying a turn-off/turn-on fluorescent behavior with good linearity. Moreover, if the Fe-MIL-88NH₂@RhB/Cu²⁺ is treated with Glu continuously, the quenching fluorescence of this platform (after Cu²⁺ sensing at blue emission) would be further in turn restored. Utilizing Fe-MIL-88NH₂@RhB probe, the imaging of intracellular Cu(II) and Glu in living A549 cells was successful conducted through divisional channels with a satisfactory low cytotoxicity, meanwhile, the sensing results of Glu in serum by the molecular logic gate was also superior, which may use for development of an medical occupational tool for amyotrophic lateral sclerosis tentative diagnosis. In addition, the MOF shows di-modal response (color and lumescence) to Cu²⁺ and Glu with excellent selectivity against a wide range of other interference analytes, and the corresponding portable low-toxicity on-line test strips for Cu²⁺ and Glu recognize has exhibited a remarkable visually chromogenic phenomena, which may utilize for monitoring these contaminants in real water sample. Finally, the feasibility of probe to monitor Cu²⁺ and Glu in foodstuffs was also evaluated.

Lanthanide upconversion and downshifting luminescence for biomolecules detection

Biomolecules play critical roles in biological activities and are closely related to various disease conditions. The reliable, selective and sensitive detection of biomolecules holds much promise for specific and rapid biosensing. In recent years, luminescent lanthanide probes have been widely used for monitoring the activity of biomolecules owing to their long luminescence lifetimes and line-like emission which allow time-resolved and ratiometric analyses. In this review article, we concentrate on recent advances in the detection of biomolecule activities based on lanthanide luminescent systems, including upconversion luminescent nanoparticles, lanthanide-metal organic frameworks, and lanthanide organic complexes. We also introduce the latest remarkable accomplishments of lanthanide probes in the design principles and sensing mechanisms, as well as the forthcoming challenges and perspectives for practical achievements.

A water stable Eu(III)-organic framework as a recyclable multi-responsive luminescent sensor for efficient detection of p-aminophenol in simulated urine, and MnVII and CrVI anions in aqueous solutions

A novel 3D Eu(iii) metal-organic framework (Eu-MOF-1) formulated as [Eu(L)(H2O)(DMA)] (L = 2-(2-nitro-4-carboxylphenyl)terephthalic acid) has been successfully synthesized under solvothermal conditions and characterized by structural analyses. Eu-MOF-1 displays a new 3D framework containing EuIII ions, ligand L, and coordinated DMA molecules and water molecules. The fluorescence investigations indicate that Eu-MOF-1 emits bright red luminescence, and shows relatively high water stability and outstanding chemical stability under a relatively wide range of pH conditions. It is noteworthy that Eu-MOF-1 can quantitatively detect p-aminophenol (PAP) which is a metabolite of phenylamine in human urine. More significantly, Eu-MOF-1 is the first reported multi-responsive luminescent sensor for detecting the biomarker PAP, and MnVII and CrVI anions with high selectivity, sensitivity, recyclability and relatively low detection limits in aqueous solutions. Furthermore, the possible sensing mechanisms of Eu-MOF-1 for selective sensing have also been explored in detail. Eu-MOF-1 could be an ideal candidate as a multi-responsive luminescent sensor in biological and environmental areas.

A valuable strategy to improve ferroelectric performance significantly via metallic ion doping in the lattice nodes of metal-organic frameworks

Metal-organic frameworks (MOFs) with polar space groups in crystallography represent a class of potential molecular-based ferroelectrics; however, the rational design and enhancement of the performance of MOF-based ferroelectrics is a great challenge. In this work, a series of mixed-metal MOFs deriving from Mg2+ ions doped into the lattice nodes of the parent-MOF (Ni-MOF) are synthesized by an in situ solvothermal method. Taking advantage of Mg2+ ions doped in the Ni-MOF, the doped-MOFs (Mg/Ni-MOFs) appear to have a significant lattice distortion and noteworthy dipole asymmetry in the crystals. It is found that the obtained doped-MOFs show a significant enhancement of ferroelectricity compared with that of the parent-MOF. This study opens up a new landscape to explore possibilities for controlling ferroelectric performance in MOF-based ferroelectrics.

Metal–organic frameworks as photoluminescent biosensing platforms: mechanisms and applications

Recent progress of MOF-based photoluminescent platforms: a comprehensive overview of their applications in biosensing and underlying mechanisms.

Efficient luminescence sensing in two lanthanide metal–organic frameworks with rich uncoordinated Lewis basic sites

Two novel Ln-MOFs containing uncoordinated Lewis basic sites for sensitive detection of Fe3+ ions and nitrobenzene through fluorescence quenching.

Luminescence response mode and chemical sensing mechanism for lanthanide-functionalized metal–organic framework hybrids

This comprehensive review systematically summarizes the luminescence response mode and chemical sensing mechanism for lanthanide-functionalized MOF hybrids (abbreviated as LnFMOFH).

A hetero-MOF-based bifunctional ratiometric fluorescent sensor for pH and water detection

A ratiometric fluorescent sensor [Eu_0.05Tb_0.95(OBA)(H₂O)Cl] detects pH and water, whose paper-based sensor can be applied in on-site pH detection.

Spiropyran-modified upconversion nanocomposite as a fluorescent sensor for diagnosis of histidinemia

Histidinemia is a congenital metabolic disorder where the histidine (His) metabolism is blocked, resulting in increased concentrations of His in blood and urine. The disease causes an abnormal development of the patient's nervous system, which leads to many serious illnesses. Therefore, it is very important to diagnose early. In this study, we developed a novel fluorescent nanosensor NaGdF₄:Yb³⁺, Er³⁺@SiO₂–spiropyran (UCNP@SiO₂–SP). The nanosensor displayed a “turn-off” fluorescence response towards His. When His was mixed with UCNP@SiO₂–SP, His could specifically bind to SP, which could cause the isomerization of SP. The structure of SP was changed from spiroform into merocyanine form. The luminescence of the sensor was overlapped with the absorption of the merocyanine form. As a result, His will lead to fluorescence quenching of the sensor based on inner filter effects (IFE), which can be used to detect His. Importantly, as the first report of a UCNP@SiO₂–SP nanosensor for detecting His, this method exhibits good selectivity and anti-interference capability. The detection limit is 4.4 μM. In addition, the amount of His in urine was also measured, suggesting the applicability of this sensor for histidinemia diagnosis.

A novel sensor based on upconversion fluorescent nanoparticles was developed and used to diagnose histidinemia.