Understanding the Effects of Iron Precursor Ligation and Oxidation State Leads to Improved Synthetic Control for Spinel Iron Oxide Nanocrystals

Insights into semi-continuous synthesis of iron oxide nanoparticles (IONPs) via thermal decomposition of iron oleate

The increasing demand for magnetic iron oxide nanoparticles (IONPs) in biomedicine necessitates efficient and scalable production methods. Thermal decomposition offers excellent tailoring of the particle properties but its discontinuous batch-operation is restricting scale-up and industrial application. To overcome these challenges, several studies have demonstrated semi-continuous thermal decomposition by slowly injecting the precursor, though only half of them produce magnetite IONPs and even fewer use iron oleate precursors. The available studies are limited, often focusing on single synthesis variables and a comprehensive mapping of the physicochemical properties to reaction conditions is missing. Here we present our investigation of semi-continuous thermal decomposition of iron oleate as a route for the synthesis of magnetic IONPs. We achieved the semi-continuous synthesis of spherical IONPs with properties matching those obtained via the conventional heat-up method. We explored the the effect of multiple synthesis variables, namely addition rate, dwell time, iron oleate amount, oleic acid amount, temperature and consistently report magnetic saturation of our samples. We found that the dwell time seemingly has a stronger effect on particle sizes and magnetic saturation than the addition speed, within moderate addition rates, and further are we the first to report the effect of reaction temperature on semi-continuous synthesis. The iron oleate precursor obtained from salt exchange was employed without pretreatment or dilution thereby facilitating a streamlined synthesis process. An oxidative phase transfer was used to mitigate the key challenge of hydrophobicity of oleate-capped IONPs, enabling their potential use in biomedical applications. Our work advances the understanding of of synthesis-property relationships of IONPs by demonstrating the translation of established synthesis protocols into more efficient and scalable processes through which it provides insights for developing and optimizing future production protocols for various applications.

A review on synthesis, capping and applications of superparamagnetic magnetic nanoparticles

Magnetic nanoparticles (MNPs) have garnered significant attention from researchers due to their numerous technologically significant applications in diverse fields, including biomedicine, diagnostics, agriculture, optics, mechanics, electronics, sensing technology, catalysis, and environmental remediation. The superparamagnetic nature of MNP is exploited for many applications and remains fascinating to study many fundamental phenomena. The uniqueness of this review is that it gives an in-depth review of different synthesis approaches adopted for preparing magnetic nanoparticles and nanoparticle formation mechanisms, functionalizing them with different capping agents, and applying different functionalized magnetic nanoparticles. The important synthesis techniques covered include coprecipitation, microwave-assisted, sonochemical, sol-gel, microemulsion, hydrothermal/solvothermal, thermal decomposition, and mechano-chemical synthesis. Further, the advantages and disadvantages of each technique are discussed, and tables show important results of prepared particles. Other aspects covered in this review are the dispersion of magnetic nanoparticles in the continuous matrix, the influence of surface capping on high-temperature thermal stability, the long-term stability of ferrofluids, and applications of functionalized magnetic nanoparticles. For effective utilization of the ferrite nanoparticles, it is essential to formulate thermally and colloidally stable magnetic nanoparticles with desired magnetic properties. Capping enhances the phase transition temperature and long-term colloidal stability. Magnetic nanoparticles capped or functionalized with specific binding species, specific components like drugs, or other functional groups make them suitable for applications in biotechnology/biomedicine. Recent studies reveal the tremendous scope of MNPs in therapeutics and theranostics. The requirements for nanoparticle size, morphology, and physio-chemical properties, especially magnetic properties, functionalization, and stability, vary with applications. There are also challenges for precise size control and the cost-effective production of nanoparticles in large quantities. The review should be an ideal material for researchers working on magnetic nanomaterials and an excellent reference for freshers.

Colloidal Synthesis of Monodisperse High-Entropy Spinel Oxide Nanocrystals

Synthesis of high-entropy oxide (HEO) nanocrystals has focused on increasing the temperature in the entropy term (T(ΔS)) to overcome the enthalpy term. However, these high temperatures lead to large, polydisperse nanocrystals. In this work, we leverage the low solubility product (Ksp) of metal oxides and optimize the Lewis-acid-catalyzed esterification reaction for equal rate production of the cation monomers to synthesize HEO nanocrystals at low temperatures, producing the smallest (<4 nm) and most monodisperse (<15% size dispersity) HEOs to date. We apply these HEO nanocrystals as electrocatalysts, exhibiting promising activity toward the oxygen evolution reaction in alkaline media, with an overpotential of 345 mV at 10 mA/cm2.

General Route to Colloidally Stable, Low-Dispersity Manganese-Based Ternary Spinel Oxide Nanocrystals

While certain ternary spinel oxides have been well-explored with colloidal nanochemistry, notably the ferrite spinel family, ternary manganese (Mn)-based spinel oxides have not been tamed. A key composition is cobalt (Co)-Mn oxide (CMO) spinel, CoxMn3-xO4, that, despite exemplary performance in multiple electrochemical applications, has few reports in the colloidal literature. Of these reports, most show aggregated and polydisperse products. Here, we describe a synthetic method for small, colloidally stable CMO spinel nanocrystals with tunable composition and low dispersity. By reacting 2+ metal-acetylacetonate (M(acac)2) precursors in an amine solvent under an oxidizing environment, we developed a pathway that avoids the highly reducing conditions of typical colloidal synthesis reactions; these reducing conditions typically push the system toward a monoxide impurity phase. Through surface chemistry studies, we identify organic byproducts and their formation mechanism, enabling us to engineer the surface and obtain colloidally stable nanocrystals with low organic loading. We report a CMO/carbon composite with low organic contents that performs the oxygen reduction reaction (ORR) with a half-wave potential (E1/2) of 0.87 V vs RHE in 1.0 M potassium hydroxide at 1600 rpm, rivaling previous reports for the highest activity of this material in ORR electrocatalysis. We extend the general applicability of this procedure to other Mn-based spinel nanocrystals such as Zn-Mn-O, Fe-Mn-O, Ni-Mn-O, and Cu-Mn-O. Finally, we show the scalability of this method by producing inorganic nanocrystals at the gram scale.

Controlled CO labilization of tungsten carbonyl precursors for the low-temperature synthesis of tungsten diselenide nanocrystals

We report a low-temperature colloidal synthesis of WSe2 nanocrystals from tungsten hexacarbonyl and diphenyl diselenide in trioctylphosphine oxide (TOPO). We identify TOPO-substituted intermediates, W(CO)5TOPO and cis-W(CO)4(TOPO)2 by infrared spectroscopy. To confirm these assignments, we synthesize aryl analogues of phosphine-oxide-substituted intermediates, W(CO)5TPPO (synthesized previously, TPPO = triphenylphosphine oxide) and cis-W(CO)4(TPPO)2 and fac-W(CO)3(TPPO)3 (new structures reported herein). Ligation of the tungsten carbonyl by either the alkyl or aryl phosphine oxides results in facile labilization of the remaining CO, enabling low-temperature decomposition to nucleate WSe2 nanocrystals. The reactivity in phosphine oxides is contrasted with syntheses containing phosphine ligands, where substitution results in decreased CO labilization and higher temperatures are required to induce nanocrystal nucleation.

A Single Source, Scalable Route for Direct Isolation of Earth-Abundant Nanometal Carbide Water-Splitting Electrocatalysts

Single-phase M_xCs (M = Fe, Co, and Ni) were prepared by solvothermal conversion of Prussian blue single source precursors. The single source precursor is prepared in water, and the conversion process is carried out in alkylamines at reaction temperatures above 200 °C. The reaction is scalable using a commercial source of Fe-PB. High-resolution transmission electron microscopy, X-ray photoelectron microscopy, and powder X-ray diffraction confirm that carbides have thin oxide termination but lack graphitic surfaces. Electrocatalytic activity reveals that Fe₃C and Co₂C are oxygen evolution reaction electrocatalysts, while Ni₃C is a bifunctional [OER and hydrogen evolution reaction (HER)] electrocatalyst.

Olivine Crystal Structure-Directed Twinning in Iron Germanium Sulfide (Fe2GeS4) Nanoparticles

Understanding the microstructure of complex crystal structures is critical for controlling material properties in next-generation devices. Synthetic reports of twinning in bulk and nanostructured crystals with detailed crystallographic characterization are integral for advancing systematic studies of twinning phenomena. Herein, we report a synthetic route to controllably twinned olivine nanoparticles. Microstructural characterization of Fe₂GeS₄ nanoparticles via electron microscopy (imaging, diffraction, and crystallographic analysis) demonstrates the formation of triplets of twins, or trillings. We establish synthetic control over the particle crystallinity and crystal growth. We describe the geometrical basis for twin formation, hexagonal pseudosymmetry of the orthorhombic lattice, and rank all of the reported olivine compounds according to this favorability to form twins. The work in this study highlights an area ripe for future exploration with respect to the advancement of solution-phase synthetic approaches that can control microstructure in compositionally complex, technologically relevant structures. Finally, we discuss the potential implications for olivine properties and performance in various applications.

Engineering of magnetic nanoparticles as magnetic particle imaging tracers

Magnetic particle imaging (MPI) has recently emerged as a promising non-invasive imaging technique because of its signal linearly propotional to the tracer mass, ability to generate positive contrast, low tissue background, unlimited tissue penetration depth, and lack of ionizing radiation. The sensitivity and resolution of MPI are highly dependent on the properties of magnetic nanoparticles (MNPs), and extensive research efforts have been focused on the design and synthesis of tracers. This review examines parameters that dictate the performance of MNPs, including size, shape, composition, surface property, crystallinity, the surrounding environment, and aggregation state to provide guidance for engineering MPI tracers with better performance. Finally, we discuss applications of MPI imaging and its challenges and perspectives in clinical translation.

Group 13 Lewis acid catalyzed synthesis of metal oxide nanocrystals via hydroxide transmetallation

A new transmetallation approach is described for the synthesis of metal oxide nanocrystals (NCs). Typically, the synthesis of metal oxide NCs in oleyl alcohol is driven by metal-based esterification catalysis with oleic acid to produce oleyl oleate ester and M-OH monomers, which then condense to form MxOy solids. Here we show that the synthesis of Cu2O NCs by this method is limited by the catalytic ability of copper to drive esterification and thus produce Cu+-OH monomers. However, inclusion of 1-15 mol% of a group 13 cation (Al3+, Ga3+, or In3+) results in efficient synthesis of Cu2O NCs and exhibits size/morphology control based on the nature of M3+. Using a continuous-injection procedure where the copper precursor (Cu2+-oleate) and catalyst (M3+-oleate) are injected into oleyl alcohol at a controlled rate, we are able to monitor the reactivity of the precursor and M3+ catalyst using UV-visible and FTIR absorbance spectroscopies. These time-dependent measurements clearly show that M3+ catalysts drive esterification to produce M3+-OH species, which then undergo transmetallation of hydroxide ligands to generate Cu+-OH monomers required for Cu2O condensation. Ga3+ is found to be the "goldilocks" catalyst, producing NCs with the smallest size and a distinct cubic morphology not observed for any other group 13 metal. This is believed to be due to rapid transmetallation kinetics between Ga3+-OH and Cu+-oleate. These studies introduce a new mechanism for the synthesis of metal oxides where inherent catalysis by the parent metal (i.e. copper) can be circumvented with the use of a secondary catalyst to generate hydroxide ligands.

Green Synthesis of Iron Oxides and Phosphates via Thermal Treatment of Iron Polyphenols Synthesized by a Camellia sinensis Extract

Iron oxide nanoparticles (FeONPs) prepared with plant extracts have been emerging as green and sustainable materials. FeONPs are usually amorphous due to the chelation of the tea polyphenols (TPs) to the iron, and the real nature of the iron compounds is not completely understood. The main goal of this study was to investigate the behavior of the green FeONPs synthesized from an Fe³⁺ salt and Cammelia sinensis (black tea) extract upon thermal treatment, in order to remove TPs and enable the formation of crystalline materials suitable for a thorough characterization and with the potential for diverse applications. The as-prepared FeONPs were assigned as mixed-valence Fe(III) oxyhydroxides and Fe(II)/Fe(III) ions bound to TPs. A detailed description of the phase transformation upon heating revealed the formation of the rare nano β-Fe₂O₃ phase at 400 °C, followed by a transformation to α-Fe₂O₃ as the temperature increased. Above 600 °C, the unprecedented formation of FePO₄ and Fe₃PO₇ was observed, produced from the reaction of Fe₂O₃ and free phosphate ions present in the black tea leaves, Fe₃PO₇ being the major phase obtained at 900 °C. Finally, the catalytic potential of the FeONPs to treat the azo dye methyl orange through a heterogeneous Fenton-like system was investigated.