Two Solvent-Induced In(III)-Based Metal-Organic Frameworks with Controllable Topology Performing High-Efficiency Separation of C2H2/CH4 and CO2/CH4

Solvent-Induced In(III)-MOFs with Controllable Interpenetration Degree Performing High-Efficiency Separation of CO2/N2 and CO2/CH4

Herein, three In(III)-based metal-organic frameworks (In-MOFs) with different degrees of interpenetration (DOI), namely In-MOF-1, In-MOF-2, and In-MOF-3, constructed by In3+ and Y-shaped ligands 4,4',4″-s-triazine-2,4,6-triyltribenzoate (H3TATB), are successfully synthesized through the ionothermal/solvothermal method. Subsequently, three novel In-MOFs, including noninterpenetration polycatenation, 2-fold interpenetrated, and 4-fold interpenetrated structure, are employed as the platform for systematically investigating the separation efficiency of CO2/N2, CO2/CH4, and CO2/CH4/N2 mixture gas system. Among them, In-MOF-2 shows the highest CO2 uptake capacities at 298 K and simultaneously possesses the low adsorption enthalpy of CO2 (26.4 kJ/mol at low coverage), a feature desirable for low-energy-cost adsorbent regeneration. The CO2/N2 (v: v = 15/85) selectivity of In-MOF-2 reaches 37.6 (at 298 K and 1 bar), also revealing outstanding selective separation ability from flue gases and purifying natural gas, affording a unique robust separation material as it has moderate DOI and pore size. In-MOF-2 shows exceptional stability and feasibility to achieve reproducibility. Aperture adjustment makes In-MOF-2 a versatile platform for selectively capturing CO2 from flue gases or purifying natural gas.

High-throughput computational screening of MOF adsorbents for efficient propane capture from air and natural gas mixtures

In this study, we used a high-throughput computational screening approach to examine the potential of metal-organic frameworks (MOFs) for capturing propane (C3H8) from different gas mixtures. We focused on Quantum MOF (QMOF) database composed of both synthesized and hypothetical MOFs and performed Grand Canonical Monte Carlo (GCMC) simulations to compute C3H8/N2/O2/Ar and C3H8/C2H6/CH4 mixture adsorption properties of MOFs. The separation of C3H8 from air mixture and the simultaneous separation of C3H8 and C2H6 from CH4 were studied for six different adsorption-based processes at various temperatures and pressures, including vacuum-swing adsorption (VSA), pressure-swing adsorption (PSA), vacuum-temperature swing adsorption (VTSA), and pressure-temperature swing adsorption (PTSA). The results of molecular simulations were used to evaluate the MOF adsorbents and the type of separation processes based on selectivity, working capacity, adsorbent performance score, and regenerability. Our results showed that VTSA is the most effective process since many MOFs offer high regenerability (>90%) combined with high C3H8 selectivity (>7 × 103) and high C2H6 + C3H8 selectivity (>100) for C3H8 capture from air and natural gas mixtures, respectively. Analysis of the top MOFs revealed that materials with narrow pores (<10 Å) and low porosities (<0.7), having aromatic ring linkers, alumina or zinc metal nodes, typically exhibit a superior C3H8 separation performance. The top MOFs were shown to outperform commercial zeolite, MFI for C3H8 capture from air, and several well-known MOFs for C3H8 capture from natural gas stream. These results will direct the experimental efforts to the most efficient C3H8 capture processes by providing key molecular insights into selecting the most useful adsorbents.

An ethynyl-modified interpenetrated metal-organic framework for highly efficient selective gas adsorption

An ethynyl-modified interpenetrated MOF material with lvt topology, [Cu2(BTEB)(NMF)2]·NMF·8H2O (compound 1, H4BTEB = 4,4',4'',4'''-(benzene-1,2,4,5-tetrayltetrakis(ethyne-2,1-diyl))tetrabenzoic acid, NMF = N-Methylformamide), was successfully synthesized by using an alkynyl-functionalized H4BTEB organic ligand under solvothermal conditions. Structural analysis shows that compound 1, consisting of a tetradentate carboxylic acid ligand and classical [Cu2(CO2)4] paddle-wheel structure building units, has a rare 4-connected lvt topology with dual interpenetrating structure, which can improve the framework stability, as well as the gas adsorption capacity and selectivity due to the restricted pore channel. According to the study of gas adsorption performance, compound 1 with a larger surface area, boasts a superior adsorption capacity for small gas molecules. Also, ideal adsorption solution theory (IAST) computational simulation shows that compound 1 has good gas adsorption selectivity for C3H8/CH4, indicating its potential application in gas separation.

Theoretical investigation of C1-C4 hydrocarbons adsorption and separation in a porous metallocavitand

The purification of light hydrocarbons is one of the most important chemical processes globally which consumes substantial energy. Porous materials are likely to improve the efficiency of the separation process by acting as regenerable solid adsorbents. To investigate such translational systems, the underlying mechanism of adsorption in the porous materials must be taken into account. Herein we report the adsorption and selective separation of C1-C4 hydrocarbons in the coinage metal-based macrocyclic metallocavitand Pillarplex, which exhibits excellent performance in the adsorption of CH₄ at the ambient conditions with a binding energy of -17.9 kcal mol^-1. In addition, the endohedral adsorption of C2-C4 hydrocarbon is impressive. The CH₄, C₂H₄, C₃H₄, and 1,3-butadiene have potential uptake of 2.57, 4.26, 3.60, and 2.95 mmol g^-1, respectively at ambient conditions are highest from their respective isomers. Selective separation of C1-C4 hydrocarbons is studied using ideal adsorption solution theory demonstrating its potential for one-step purification of C1-C3 hydrocarbons.