Crystal Phase and Morphology-Controlled Synthesis of Tungsten Oxide Nanostructures for Remarkably Ultrafast Adsorption and Separation of Organic Dyes

Bifunctional Nanoelectrocatalyst: Semi-Amorphous Cobalt Tungstate-Based Nanocomposites Surpassing Amorphous and Crystalline Counterparts

Electrocatalytic water splitting to hydrogen and oxygen is considered to be one of the significant routes for future renewable energy conversion. Therefore, the development of unique, efficient, and cost-effective bifunctional electrocatalysts, which can perform both hydrogen evolution reaction (HER) and oxygen evolution reaction (OER), is critical for the accessible utilization of renewable energy. The increasing overall efficiency of the water-splitting reaction is pivotal for sustainable energy conversion and hydrogen production. Herein, we present a facile solution-based synthesis route to control the crystallinity of the cobalt tungstate (CoWO4) nanomaterials to amorphous, semiamorphous, and crystalline phases and further exploit these nanomaterials as bifunctional electrocatalysts for the HER, OER, and overall electrochemical water splitting reaction. Notably, the semiamorphous cobalt tungstate nanomaterials show a remarkable surface area of approximately 150 m2/g, the highest reported for CoWO4-based materials, and demonstrated superior activity for both the OER and HER and outstanding stability over the amorphous and crystalline counterparts. Notably, the SemiAmp||SemiAmp electrolyzer demonstrated a better performance for overall water splitting than the commercial RuO2||Pt/C electrolyzer.

Glutathione-Mediated Synthesis of WO3 Nanostructures with Controllable Morphology/Phase for Energy Storage, Photoconductivity, and Photocatalytic Applications

Developing an improved synthesis method that controls the morphology and crystal phase remains a substantial challenge. Herein, we report phase and morphology-controlled hydrothermal synthesis of tungsten oxides by varying acid concentration and utilizing glutathione (GSH) as a structural directing agent, together with the exploration of their applications in supercapacitors, photoconductivity, and photocatalysis. Orthorhombic hydrated tungsten oxide (WO3·0.33H2O) with nonuniform block and plate-like morphology was obtained at 3 M hydrochloric acid (HCl). In contrast, nonhydrated monoclinic tungsten oxide (WO3) with smaller rectangular blocks was obtained at 6 M HCl. Further, the addition of GSH results in an increase in the surface area of the materials along with a narrowing of the band gap. Moreover, it plays a pivotal role in regulating the morphology through oriented attachments, Ostwald ripening, and the self-assembly of WO3 nuclei. GHTO and GTO polymorphs showed pseudocapacitive behavior with the highest specific capacitances of 450 and 300 F g-1 at 0.5 A g-1, maintaining 94 and 92% retention stability, respectively, over 1000 cycles at 2 A g-1. Also, the synthesized materials displayed favorable photoconductivity under light irradiation, implying potential utilization in photovoltaic applications. Moreover, these materials exhibited remarkable photocatalytic performance in the degradation of methylene blue (MB) dye, establishing themselves as highly effective photocatalysts. Therefore, nanostructured tungsten oxide showcases its versatility, rendering it an appealing candidate for energy storage, photovoltaic systems, and photocatalysis.

Selective Adsorption of Methyl Orange and Methylene Blue by Porous Carbon Material Prepared From Potassium Citrate

As the discharge amount of dye wastewater increases with the development of the textile printing and dyeing industries, the treatment of the dyes in the wastewater becomes more complex. The adsorption method is a commonly used method for treating dye wastewater. The adsorbent is the key factor affecting the adsorption performance. To develop a high-performance adsorbent, a porous carbon material prepared from potassium citrate by the calcination method was applied in the adsorption of dye-containing water in this study. The morphology and pore structure of the porous carbon materials were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), and N2 adsorption/desorption isotherm. The porous carbon material with a specific surface area of 1436 m2 g-1, PC-900, was used as an adsorbent for the adsorption of methyl orange (MO) and methylene blue (MB). The results showed that the maximum adsorption capacity of PC-900 for MO and MB reached 927 and 1853.6 mg g-1, respectively. Studies on adsorption kinetics and adsorption isotherms showed that the pseudo-second-order kinetic model and the Langmuir isotherm model were more appropriate to describe the adsorption process of MO and MB by PC-900. In addition, the results of the mixed adsorption experiment of MO and MB dyes showed that PC-900 had selective adsorption for MB.