Kinetic Studies of Copolymerization of Cyclohexene Oxide with CO2 by a Diamino-bis(phenolate) Chromium(III) Complex

Controlled synthesis of polycarbonate diols and their polylactide block copolymers using amino-bis(phenolate) chromium hydroxide complexes

A diamine-bis(phenolate) chromium(III) complex, CrOH[L] ([L] = dimethylaminoethylamino-N,N-bis(2-methylene-4,6-tert-butylphenolate)), 2, in the presence of tetrabutylammonium hydroxide effectively copolymerizes CO2 and cyclohexene oxide (CHO) into a polycarbonate diol. The resultant low molar mass (6.3 kg mol-1) diol is used to initiate ring-opening polymerization of rac-lactide with 1,8-diazabicyclo[5.4.0]undec-7-ene (DBU) giving ABA-type block copolymers with good molar mass control through varying rac-LA-to-diol loadings and with narrow dispersities. As the degree of rac-LA incorporation increases, the glass transition temperatures (Tg) are found to decrease, whereas decomposition temperatures (Td) increase. (Diphenylphosphonimido)triphenylphosphorane (Ph2P(O)NPPh3) was used as a neutral nucleophilic cocatalyst with 2, giving phosphorus-containing polycarbonates with an Mn value of 28.5 kg mol-1, a dispersity of 1.13, a Tg value of 110 °C and a Td value of over 300 °C. A related Cr(III) complex (4) having a methoxyethyl pendent group rather than a dimethylaminoethyl group was structurally characterized as a hydroxide-bridged dimer.

A Binary Silicon-Centered Organoboron Catalyst with Superior Performance to That of Its Bifunctional Analogue

This work reported that a silicon-centered alkyl borane/ammonium salt binary (two-component) catalyst exhibits much higher activity than its bifunctional analogue (one-component) for the ring-opening polymerization of propylene oxide, showing 7.3 times the activity of its bifunctional analogue at a low catalyst loading of 0.01 mol %, and even 15.3 times the activity at an extremely low loading of 0.002 mol %. By using 19 F NMR spectroscopy, control experiments, and theoretical calculation we discovered that the central silicon atom displays appropriate electron density and a larger intramolecular cavity, which is useful to co-activate the monomer and to deliver propagating chains, thus leading to a better intramolecular synergic effect than its bifunctional analogue. A unique two-pathway initiation mode was proposed to explain the unusual high activity of the binary catalytic system. This study breaks the traditional impression of the binary Lewis acid/nucleophilic catalyst with poor activity because of the increase in entropy.

Comparison of Imine- and Phosphinimine-Supported Indium Complexes: Tuning the Reactivity for the Sequential and Simultaneous Copolymerization of Lactide and ε-Caprolactone

Imine- and phosphinimine-supported indium complexes were used as catalysts in the polymerization of racemic lactide and ε-caprolactone as well as their copolymerization by the sequential and simultaneous addition of monomers. Tuning the electronics and sterics of the indium centers by either (i) changing the nature of the nitrogen donors and (ii) coordinating a hemilabile side group had a significant effect on the reactivity of the complexes, their stability, and their control in the synthesis of block copolymers. Specifically, the imine-supported complex (5) showed the highest activity in the homo- and copolymerization of the cyclic esters, in contrast to the phosphinimine-supported complex (7), which was significantly slower and less stable. The presence of morpholine and thiomorpholine hemilabile side groups either reduced the activity or prevented the formation of alkoxide complexes.

Borinane-based organoboron catalysts for alternating copolymerization of CO2 with cyclic ethers: improved productivity and facile recovery

Organoboron catalysts including an ammonium salt separated by a few carbon–carbon bonds to a boron center were designed and synthesized. Borinane-based organoboron catalysts exhibited highest activity for the copolymerization of CO2 and epoxides.

Synthesis, Characterization, and Catalytic Study of Amine-Bridged Bis(phenolato) Co(II) and Co(II/III)-M(I) Complexes (M = K or Na)

Co(II) complexes 1-3 bearing amine-bridged bis(phenolato) complexes have been synthesized through reactions of bis(phenols) with CoCl₂ or Co(OAc)₂. Oxidation of the Co(II) complex with air resulted in partial oxidation, generating mixed valence Co(II/III) complexes 4 and 5. In addition, due to the presence of alkali compounds (KOAc and NaOMe), 4 and 5 formed as Co-alkali metal heterometallic complexes, which are the first example of mixed valence Co(II/III)-M(I) (M = K or Na) complexes. Complexes 1-5 showed good activity in the cycloaddition of epoxides and CO₂ under atmospheric pressure, generating cyclic carbonates in 40-99% yields. Co(II/III)-Na(I) complex 5 performed better in reactions of bulkier substrates, underlining the enhanced activity of mixed valence Co-alkali metal heterometallic complexes. On the contrary, complex 5 showed limited activity in copolymerization of epoxide and CO₂.

Copolymerization of Phthalic Anhydride with Epoxides Catalyzed by Amine-Bis(Phenolate) Chromium(III) Complexes

The effect of ligand structure on the catalytic activity of amine-bis(phenolate) chromium(III) complexes in the ring-opening copolymerization of phthalic anhydride and a series epoxides was studied. Eight complexes differing in the donor-pendant group (R₁) and substituents (R₂) in phenolate units were examined as catalysts of the model reaction between phthalic anhydride and cyclohexane oxide in toluene. They were used individually or as a part of the binary catalytic systems with nucleophilic co-catalysts. The co-catalyst was selected from the following organic bases: PPh₃, DMAP, 1-butylimidazole, or DBU. The binary catalytic systems turned out to be more active than the complexes used individually, and DMAP proved to be the best choice as a co-catalyst. When the molar ratio of [PA]:[epoxide]:[Cr]:[DMAP] = 250:250:1:1 was applied, the most active complex (R₁-X = CH₂NMe₂, R₂ = F) allowed to copolymerize phthalic anhydride with differently substituted epoxides (cyclohexene oxide, 4-vinylcyclohexene oxide, styrene oxide, phenyl glycidyl ether, propylene oxide, butylene oxide, and epichlorohydrin) within 240 min at 110 °C. The resulting polyesters were characterized by M_n up to 20.6 kg mol^-1 and narrow dispersity, and they did not contain polyether units.

Chromium Diamino-bis(phenolate) Complexes as Catalysts for the Ring-Opening Copolymerization of Cyclohexene Oxide and Carbon Dioxide

Chromium diamino-bis(phenolate) complexes, CrXL [where L = 6,6'-((1,4-diazepane-1,4-diyl)bis(methylene))bis(2,4-dimethylphenolato) and X = Cl^- (1), OH^- (2), and N₃^- (3)], were prepared and characterized by MALDI-TOF MS and single-crystal X-ray diffraction. Complex 1 crystallized as two linkage isomers, specifically a green chloride-bridged dimer (1) and a pink asymmetrically bridged isomer exhibiting one chloride bridging atom and one bridging phenolate oxygen (1'). Adventitious moisture during sample handling causes the formation of hydroxide-containing complex 2. The reaction of 1 with PPNN₃ (where PPN = bis(triphenylphosphine)iminium) permits the isolation of a crystalline chromium azide complex, 3, which was structurally authenticated. Complex 1 showed good activity toward the ring-opening copolymerization of cyclohexene oxide and carbon dioxide with an added chloride, azide, or 4-(dimethylamino)pyridine (DMAP) cocatalyst to give a completely alternating polycarbonate with a narrow molecular weight dispersity.

Efficient Production of Poly(Cyclohexene Carbonate) via ROCOP of Cyclohexene Oxide and CO2 Mediated by NNO-Scorpionate Zinc Complexes

New mono- and dinuclear chiral alkoxide/thioalkoxide NNO-scorpinate zinc complexes were easily synthesized in very high yields, and characterized by spectroscopic methods. X-ray diffraction analysis unambiguously confirmed the different nuclearity of the new complexes as well as the variety of coordination modes of the scorpionate ligands. Scorpionate zinc complexes 2, 4 and 6 were assessed as catalysts for polycarbonate production from epoxide and carbon dioxide with no need for a co-catalyst or activator under mild conditions. Interestingly, at 70 °C, 10 bar of CO₂ pressure and 1 mol % of loading, the dinuclear thioaryloxide [Zn(bpzaepe)₂{Zn(SAr)₂}] (4) behaves as an efficient and selective one-component initiator for the synthesis of poly(cyclohexene carbonate) via ring-opening copolymerization of cyclohexene oxide (CHO) and CO₂, affording polycarbonate materials with narrow dispersity values.

Copolymerization of CHO/CO2 catalyzed by a series of aluminum amino-phenolate complexes and insights into structure-activity relationships

Two series of monometallic aluminum complexes were prepared and characterized by elemental analyses, ¹H and ¹³C{¹H} NMR spectroscopy, and X-ray crystallography: Al[L]X, where [L] = dimethylaminoethylamino-N,N-bis(2-methylene-4,6-tert-butylphenolate) and X = Cl, OEt, and Al[L]₂Cl, where [L] = 6-{[(2R,6R)-2,6-dimethyl-4-morpholino]methylene}-2,4-bis(tert-butyl)phenolate or 6-(piperidinomethylene)-2-(tert-butyl)-4-(methyl)phenolate. All the complexes, including the previously reported morpholinyl complex Al[L]Cl, where [L] = 4-(2-aminoethyl)morpholinylamino-N,N-bis(2-methylene-4,6-tert-butylphenolate), were tested as catalysts for copolymerization of cyclohexene oxide and CO₂ in the presence and absence of PPNCl. When coupled with 1 equiv. PPNCl, the complexes exhibit similar activities and the best selectivity for poly(cyclohexenecarbonate) vs. the cyclic product, cyclohexene carbonate, was obtained with the morpholinyl complex (ca. 90%) whereas significantly lower selectivities (<1-63%) were obtained with the other complexes. Preliminary DFT calculations investigating this difference in selectivity were carried out by analyzing the aluminum partial atomic charges in the Al-carbonate intermediates.

Bimetallic Zinc Catalysts for Ring-Opening Copolymerization Processes

Novel bimetallic zinc acetate complexes supported by heteroscorpionate ligands have been developed for the ring-opening copolymerization of cyclohexene oxide and CO₂ and the terpolymerization of cyclohexene oxide, phthalic anhydride, and CO₂. Heteroscorpionate ligands precursors L₁-L₃ were reacted with two equivalents of zinc acetate to afford the dinuclear zinc complexes [{Zn(κ³-bpzappe)}(μ-O₂CCH₃)₃-{Zn(HO₂CCH₃)}] (1), [{Zn(κ³-bpzbdmape)}(μ-O₂CCH₃)₃-{Zn(HO₂CCH₃)}] (2), and [{Zn(κ³-bpzbdeape)}(μ-O₂CCH₃)₃{Zn(HO₂CCH₃)}] (3) in excellent yields. The molecular structure of these compounds was determined spectroscopically and confirmed by X-ray diffraction analysis. Zinc acetate complexes 1-3 were screened as catalysts for the copolymerization of cyclohexene oxide and CO₂ to produce poly(cyclohexene)carbonate, and complex 3 was found to be the most active catalyst for this process in the absence of a cocatalyst. Furthermore, the terpolymerization of cyclohexene oxide, phthalic anhydride, and CO₂ was studied using the combination of complex 3 and 4-dimethylaminopyridine as catalyst system yielding the corresponding polyester-polycarbonate materials.

Update and Challenges in Carbon Dioxide-Based Polycarbonate Synthesis

The utilization of carbon dioxide as a comonomer to produce polycarbonates has attracted a great deal of attention from both industrial and academic communities because it promises to replace petroleum-derived plastics and supports a sustainable environment. Significant progress in the copolymerization of cyclic ethers (e.g., epoxide, oxetane) and carbon dioxide has been made in recent decades, owing to the rapid development of catalysts. In this Review, the focus is to summarize and discuss recent advances in the development of homogeneous catalysts, including metal- and organo-based complexes, as well as the preparation of carbon dioxide-based block copolymer and functional polycarbonates.

Mechanistic guidelines in nonreductive conversion of CO2: the case of cyclic carbonates

This perspective provides general mechanistic guidelines for the catalytic formation of cyclic organic carbonates from CO₂ and cyclic ethers.

Bimetallic scorpionate-based helical organoaluminum complexes for efficient carbon dioxide fixation into a variety of cyclic carbonates

The binuclear aluminum complexes [AlR₂(κ²-NN′;κ²-NN′)AlR₂] with TBAB/PPNCl behave as excellent systems for cyclic carbonate formation from CO₂ with challenging epoxides.

Cobalt amino-bis(phenolate) complexes for coupling and copolymerization of epoxides with carbon dioxide

Electron-withdrawing groups on phenolate donors enhance polycarbonate production from CO₂ and cyclohexene oxide by Co(ii) amino-bis(phenolate) complexes.