Kinetics of the Two-Stage Oxidation of Sulfide by Chlorine Dioxide

Removal of Sulfide Ions from Kraft Washing Effluents by Photocatalysis with N and Fe Codoped Carbon Dots

N and Fe codoped carbon dots (N,Fe-CDs) were fabricated from citric acid, L-glutamic acid and ferric chloride via a hydrothermal method for the photocatalytic removal of S2- from kraft washing effluents (KWE). The N,Fe-CDs were fluorescent nanoparticles (average size of 3.18 nm) and catalyzed the oxidation of S2- following a first-order kinetic model with an activation energy of 33.77 kJ/mol. The N,Fe-CDs tolerated elevated temperatures as high as 80 °C without catalyst deactivation. The N,Fe-CDs catalysts were reusable for at least four cycles, preserving over 90% of the activity. In the treatment of KWE from the kraft pulping of eucalyptus, the concentration of S2- was decreased by the N,Fe-CDs from 1.19 to 0.41 mmol/L in 6 h. Consequently, near complete remediation was obtained in 24 h. In addition, half of the chemical oxygen demand was removed after treatment with 500 mg/L of the N,Fe-CDs. In addition, the present photocatalyst was safe within a concentration of 200 mg/L, as indicated by the acetylcholinesterase inhibition test. Our findings may help develop a cleaner production process for kraft brownstock washing.

Chlorine dioxide-based oxidation processes for water purification：A review

Chlorine dioxide (ClO₂) has emerged as a broad-spectrum, safe, and effective disinfectant due to its high oxidation efficiency and reduced formation of organochlorinated by-products during application. This article provides an updated overview of ClO₂-based oxidation processes used in water treatment. A systematic review of scientific information and experimental data on ClO₂-based water purification procedures is presented. Concerning ClO₂-based oxidation derivative problems, the pros and cons of ClO₂-based combined processes are assessed and disinfection by-product (DBP) control approaches are proposed. The kinetic and mechanistic data on ClO₂ reactivity towards micropollutants are discussed. ClO₂ selectively reacts with electron-rich moieties (anilines, phenols, olefins, and amines) and eliminates certain inorganic ions and microorganisms with high efficiency. The formation of chlorite and chlorate during the oxidation process is a crucial concern when utilizing ClO₂. Future applications include the combination of ClO₂ with ferrous ions, activated carbon, ozone, UV, visible light, or persulfate processes. The combined process can reduce by-product generation while still ensuring ClO₂ sterilization and disinfection. Overall, this research could provide useful information and new insights into the application of ClO₂-based technologies.

Effects of reductive inorganics and NOM on the formation of chlorite in the chlorine dioxide disinfection of drinking water

Chlorine dioxide (ClO₂) disinfection usually does not produce halogenated disinfection by-products, but the formation of the inorganic by-product chlorite (ClO₂^-) is a serious consideration. In this study, the ClO₂^- formation rule in the ClO₂ disinfection of drinking water was investigated in the presence of three representative reductive inorganics and four natural organic matters (NOMs), respectively. Fe²⁺ and S^2- mainly reduced ClO₂ to ClO₂^- at low concentrations. When ClO₂ was consumed, the ClO₂^- would be further reduced by Fe²⁺ and S^2-, leading to the decrease of ClO₂^-. The reaction efficiency of Mn²⁺ with ClO₂ was lower than that of Fe²⁺ and S^2-. It might be the case that MnO₂ generated by the reaction between Mn²⁺ and ClO₂ had adsorption and catalytic oxidation on Mn²⁺. However, Mn²⁺ would not reduce ClO₂^-. Among the four NOMs, humic acid and fulvic acid reacted with ClO₂ actively, followed by bovine serum albumin, while sodium alginate had almost no reaction with ClO₂. The maximum ClO₂^- yields of reductive inorganics (70%) was higher than that of NOM (around 60%). The lower the concentration of reductive substances, the more ClO₂^- could be produced by per unit concentration of reductive substances. The results of the actual water samples showed that both reductive inorganics and NOM played an important role in the formation of ClO₂^- in disinfection.

Reactivity of Small Oxoacids of Sulfur

Oxidation of sulfide to sulfate is known to consist of several steps. Key intermediates in this process are the so-called small oxoacids of sulfur (SOS)—sulfenic HSOH (hydrogen thioperoxide, oxadisulfane, or sulfur hydride hydroxide) and sulfoxylic S(OH)₂ acids. Sulfur monoxide can be considered as a dehydrated form of sulfoxylic acid. Although all of these species play an important role in atmospheric chemistry and in organic synthesis, and are also invoked in biochemical processes, they are quite unstable compounds so much so that their physical and chemical properties are still subject to intense studies. It is well-established that sulfoxylic acid has very strong reducing properties, while sulfenic acid is capable of both oxidizing and reducing various substrates. Here, in this review, the mechanisms of sulfide oxidation as well as data on the structure and reactivity of small sulfur-containing oxoacids, sulfur monoxide, and its precursors are discussed.