Structural Investigations of MA1-xDMAxPbI3 Mixed-Cation Perovskites

A negatively-charged supramolecular trap for precisely catching strontium ion

Due to the analogous physicochemical properties and weak coordination ability of alkali and alkaline earth metals, accurate separation of radioactive 90Sr from groundwater or seawater still presents a big challenge in environmental radioactivity remediation. Here we mimic the complexation behavior of molecular crown-ether carboxylic acids to construct an elegant negatively charged supramolecular trap in an anionic crown ether-based metal-organic framework (ZJU-X99) for precisely catching Sr2+. Owing to the synergistic effects of electrostatic interactions arising from the In(COO)4- nodes and supramolecular host-guest recognition from the 18-crown-6 rings, ZJU-X99 exhibits rapid adsorption kinetics (1 min), high adsorption capacity (263 mg/g), and exceptional selectivity for Sr2+ even when 1000-fold of Na⁺, K⁺ and Cs⁺ coexist. Relative to alkali metals, Sr2+ ions are intricately ensconced within the supramolecular trap, resulting in lowest binding energy and minimal structural alterations. Dynamic column experiments and radioactive 90Sr decontamination trials further validate its practical application prospects. Our findings offer valuable insights into the design of supramolecular frameworks featuring tailored binding sites for targeted ions.

Guanidinium Substitution Improves Self-Healing and Photodamage Resilience of MAPbI3

Self-healing materials can become game changers for developing sustainable (opto)electronics. APbX3 halide (=X-) perovskites, HaPs, have shown a remarkable ability to self-heal damage. While we demonstrated self-healing in pure HaP compounds, in single crystals, and in polycrystalline thin films (as used in most devices), HaP compositions with multiple A+ (and X-) constituents are preferred for solar cells. We now show self-healing in mixed A+ HaPs. Specifically, if at least 15 atom % of the methylammonium (MA+) A cation is substituted for by guanidinium (Gua+) or acetamidinium (AA+), then the self-healing rate after damage is enhanced. In contrast, replacing MA+ with dimethylammonium (DMA+), comparable in size to Gua+ or AA+, does not alter this rate. Based on the times for self-healing, we infer that the rate-determining step involves short-range diffusion of A+ and/or Pb2+ cations and that the self-healing rate correlates with the strain in the material, the A+ cation dipole moment, and H-bonding between A+ and I-. These insights may offer clues for developing a detailed self-healing mechanism and understanding the kinetics to guide the design of self-healing materials. Fast recovery kinetics are important from the device perspective, as they allow complete recovery in devices during operation or when switched off (LEDs)/in the dark (photovoltaics).

Formation of iminium ions during the processing of metal halide perovskites

Ammonium ions are a key component of many organic-inorganic metal halide materials. We show that the hexagonal perovskite (Me2NH2)PbI3 is rapidly transformed to iminium-based perovskites (Me2CNMeR)PbI3 (R = Me, Et), simply by stirring the material in the respective ketone at room temperature, triggering clear changes in the materials' photophysical properties.

Phase Transitions and Dynamics in Mixed Three- and Low-Dimensional Lead Halide Perovskites

Lead halide perovskites are extensively investigated as efficient solution-processable materials for photovoltaic applications. The greatest stability and performance of these compounds are achieved by mixing different ions at all three sites of the APbX3 structure. Despite the extensive use of mixed lead halide perovskites in photovoltaic devices, a detailed and systematic understanding of the mixing-induced effects on the structural and dynamic aspects of these materials is still lacking. The goal of this review is to summarize the current state of knowledge on mixing effects on the structural phase transitions, crystal symmetry, cation and lattice dynamics, and phase diagrams of three- and low-dimensional lead halide perovskites. This review analyzes different mixing recipes and ingredients providing a comprehensive picture of mixing effects and their relation to the attractive properties of these materials.

Composition-Property Relations for GAx FAy MA1- x - y PbI3 Perovskites

Halide perovskites are materials for diverse optoelectronic applications owing to a combination of factors, including their compositional flexibility. A major source of this diversity of compositions comes from the use of mixed organic cations in the A-site of such compounds to form solid solutions. Many organic cations are possible for this purpose. Although significant progress is made over years of intensive research, the determination of systematic relationships between the compositions and properties of halide perovskites is not exploited accordingly. Using the MAPbI3 prototype, a wide range of compositions substituted by formamidinium (FA+ ) and guanidinium (GA+ ) cations are studied. From a detailed collection of experimental data and results reported in the literature, heat maps correlating the composition of GAx FAy MA1- x - y PbI3 solid solutions with phase transition temperatures, dielectric permittivity, and activation energies are constructed. Considering the characteristics of organic cations, namely their sizes, dipole moments, and the number of N─H bonds, it is possible to interpret the heat maps as consequences of these characteristics. This work brings a systematization of how obtaining specific properties of halide perovskites might be possible by customizing the characteristics of the A-site organic cations.

(C5H6N)Pb2X5 (X = Cl, Br): Hybrid Lead Halides Based on Seven-Coordinate Pb(II)

Hybrid lead halides are a diverse family of compounds, of interest for their optoelectronic properties, that vary in the dimensionality and connectivity of their inorganic substructures. The great majority of these compounds are based on lead-centered octahedra, with few examples featuring inorganic architectures containing higher coordination numbers. Here, we report the synthesis and characterization of a pyridinium lead bromide phase that is based on seven-coordinate Pb(II) centers. Through edge- and face-sharing, the polyhedra form a corrugated, two-dimensional inorganic substructure. Electronic structure calculations were used to examine the band structure and the role of the stereoactive lone pair in the inherently asymmetric, seven-coordinate Pb(II) geometry. For reference, we have visualized the role of the lone pair in the binary halide PbBr₂, which also has a seven-coordinate inner ligand sphere. A comparison of the new structure with the limited number of existing hybrid lead halides with similar inorganic architectures highlights the templating role of the organic cation for these compounds. We also contribute characterization and discussion of isomorphic pyridinium lead chloride, which had been deposited in the Cambridge Structural Database but never, to our knowledge, addressed in the literature. The compounds were synthesized using solution conditions and structures determined with single-crystal X-ray diffraction. The materials were also characterized via powder X-ray diffraction, combustion elemental analysis, and diffuse reflectance UV-vis spectroscopy. While the structures reported here are centrosymmetric, the seven-coordinate, capped trigonal prismatic geometry that we have identified is a source of local asymmetry that could be used as a component in designing globally noncentrosymmetric structures.

Mixed Dimethylammonium/Methylammonium Lead Halide Perovskite Crystals for Improved Structural Stability and Enhanced Photodetection

The solvent acidolysis crystallization technique is utilized to grow mixed dimethylammonium/methylammonium lead tribromide (DMA/MAPbBr₃ ) crystals reaching the highest dimethylammonium incorporation of 44% while maintaining the 3D cubic perovskite phase. These mixed perovskite crystals show suppression of the orthorhombic phase and a lower tetragonal-to-cubic phase-transition temperature compared to MAPbBr₃ . A distinct behavior is observed in the temperature-dependent photoluminescence properties of MAPbBr₃ and mixed DMA/MAPbBr₃ crystals due to the different organic cation dynamics governing the phase transition(s). Furthermore, lateral photodetectors based on these crystals show that, at room temperature, the mixed crystals possess higher detectivity compared to MAPbBr₃ crystals caused by structural compression and reduced surface trap density. Remarkably, the mixed-crystal devices exhibit large enhancement in their detectivity below the phase-transition temperature (at 200 K), while for the MAPbBr₃ devices only insignificant changes are observed. The high detectivity of the mixed crystals makes them attractive for visible-light communication and for space applications. The results highlight the importance of the synthetic technique for compositional engineering of halide perovskites that governs their structural and optoelectronic properties.

Using steric hindrance to manipulate and stabilize metal halide perovskites for optoelectronics

The chemical instability of metal halide perovskite materials can be ascribed to their unique properties of softness, in which the chemical bonding between metal halide octahedral frameworks and cations is the weak ionic and hydrogen bonding as in most perovskite structures. Therefore, various strategies have been developed to stabilize the cations and metal halide frameworks, which include incorporating additives, developing two-dimensional perovskites and perovskite nanocrystals, etc. Recently, the important role of utilizing steric hindrance for stabilizing and passivating perovskites has been demonstrated. In this perspective, we summarize the applications of steric hindrance in manipulating and stabilizing perovskites. We will also discuss how steric hindrance influences the fundamental kinetics of perovskite crystallization and film formation processes. The similarities and differences of the steric hindrance between perovskite solar cells and perovskite light emission diodes are also discussed. In all, utilizing steric hindrance is a promising strategy to manipulate and stabilize metal halide perovskites for optoelectronics.

Isotopic Exchange Extends Charge Carrier Lifetime in Metal Lead Perovskites by Quantum Dynamics Simulations

One may expect that isotopic exchange has no influence on charge carrier lifetime and perovskite solar cell performance because isotopic effects do not affect the fundamental electronic structure of materials. Experiments defy this expectation. By performing nonadiabatic (NA) molecular dynamics simulations, we demonstrate that hydrogen and deuterium exchange significantly enhances the excited-state lifetime and stability of CH₃NH₃PbI₃. Replacing lighter hydrogen with heavier deuterium suppresses the collective motions of organic and inorganic components, thus enhancing lattice stiffness and decreasing the NA coupling. Isotopic exchange further reduces NA coupling by localizing electron wave functions for separation of electrons and holes, which beats the extended coherence time, slowing down nonradiative electron-hole recombination from CH₃ND₃PbI₃ to CD₃ND₃PbI₃ with respect to the pristine system. The unchanged fundamental electronic structure together with the prolonged carrier lifetime and enhanced stability rationalize the improvement of the deuterated CH₃NH₃PbI₃ solar cells. Our work provides valuable insights into isotope effects for the design of high-performance perovskite photovoltaic and optoelectronic devices.

Solid-State NMR and NQR Spectroscopy of Lead-Halide Perovskite Materials

Two- and three-dimensional lead-halide perovskite (LHP) materials are novel semiconductors that have generated broad interest owing to their outstanding optical and electronic properties. Characterization and understanding of their atomic structure and structure-property relationships are often nontrivial as a result of the vast structural and compositional tunability of LHPs as well as the enhanced structure dynamics as compared with oxide perovskites or more conventional semiconductors. Nuclear magnetic resonance (NMR) spectroscopy contributes to this thrust through its unique capability of sampling chemical bonding element-specifically (1/2H, 13C, 14/15N, 35/37Cl, 39K, 79/81Br, 87Rb, 127I, 133Cs, and 207Pb nuclei) and locally and shedding light onto the connectivity, geometry, topology, and dynamics of bonding. NMR can therefore readily observe phase transitions, evaluate phase purity and compositional and structural disorder, and probe molecular dynamics and ionic motion in diverse forms of LHPs, in which they can be used practically, ranging from bulk single crystals (e.g., in gamma and X-ray detectors) to polycrystalline films (e.g., in photovoltaics, photodetectors, and light-emitting diodes) and colloidal nanocrystals (e.g., in liquid crystal displays and future quantum light sources). Herein we also outline the immense practical potential of nuclear quadrupolar resonance (NQR) spectroscopy for characterizing LHPs, owing to the strong quadrupole moments, good sensitivity, and high natural abundance of several halide nuclei (79/81Br and 127I) combined with the enhanced electric field gradients around these nuclei existing in LHPs as well as the instrumental simplicity. Strong quadrupole interactions, on one side, make 79/81Br and 127I NMR rather impractical but turn NQR into a high-resolution probe of the local structure around halide ions.