Preparation of α-Linolenic-Acid-Loaded Water-in-Oil-in-Water Microemulsion and Its Potential as a Fluorescent Delivery Carrier with a Free Label

Enhancing Biodegradation of Insoluble High Molecular Weight Polycyclic Aromatic Hydrocarbons in Macroemulsion (ME) Bioreactors with a Liquid-Liquid Interface

Due to the low bioavailability and insolubility of high molecular weight polycyclic aromatic hydrocarbons (HMW-PAHs) in aqueous solutions, their degradation efficiency is significantly limited in wastewater treatment and environmental remediation. To address this challenge, we designed oil-in-water (O/W) macroemulsion (ME) bioreactors with mixed surfactants (Tween-80 and Triton X-100), n-butanol, corn oil, and Burkholderia vietnamiensis (BVs) to enhance the degradation efficiency of pyrene. Owing to the higher solubility of pyrene in MEs, it could be easily adsorbed onto hydrophobic groups on the cell surface. Furthermore, the fluorescence images showed that the BVs were adsorbed on the surface of the MEs, increasing the contact frequency and interactions between pyrene and BVs. Meanwhile, the degradation efficiency of the prepared ME bioreactor was improved by up to 198% compared to that of the conventional surfactant. Therefore, the constructed ME bioreactors can provide green guidance for HMW-PAH biodegradation in industrial wastewater and environmental remediation.

Topical Micro-Emulsion of 5-Fluorouracil by a Twin Screw Processor-Based Novel Continuous Manufacturing Process for the Treatment of Skin Cancer: Preparation and In Vitro and In Vivo Evaluations

5-Fluorouracil (5-FU), a BCS class III drug, has low oral bioavailability and is cytotoxic in nature causing severe systemic side effects when administered through the intravenous route. Topical drug delivery could potentially mitigate the systemic side-effects. Microemulsions (MEs) would be an apt solution due to enhanced partitioning of the drug to the skin. However, conventional methods for preparing MEs are inefficient since they are not continuous and are very tedious and time-consuming processes hence revealing the need for the development of continuous manufacturing technology. In our study, 5-FU MEs were prepared using a continuous manufacturing Twin Screw Process (TSP) and its efficiency in the treatment of skin cancer was evaluated. Water-in-oil MEs were prepared using isopropyl myristate as the oil phase and Aerosol OT and Tween 80 as the surfactants. The average particle size was observed to be 178 nm. Transmission electron microscopy was employed to confirm the size and shape of the MEs. FTIR study proved no physical or chemical interaction between the excipients and the drug. In vitro drug release using vertical diffusion cells and ex vivo skin permeation studies showed that the drug was released sustainably and permeated across the skin, respectively. In in vitro cytotoxicity studies, 5-FU MEs were accessed in HaCat and A431 cell lines to determine percentage cell viability and IC50. Skin irritation and histopathological examination implied that the 5-FU MEs did not cause any significant irritation to the skin. In vivo pharmacodynamics studies in rats suggested that the optimised formulation was effective in treating squamous cell carcinoma (SCC). Therefore, 5-FU MEs efficiently overcame the various drawbacks faced during oral and intravenous drug delivery. Also, TSP proved to be a technique that overcomes the various problems associated with the conventional methods of preparing MEs.

Polysaccharides, proteins, and their complex as microencapsulation carriers for delivery of probiotics: A review on carrier types and encapsulation techniques

Probiotics provide several benefits for humans, including restoring the balance of gut bacteria, boosting the immune system, and aiding in the management of certain conditions such as irritable bowel syndrome and lactose intolerance. However, the viability of probiotics may undergo a significant reduction during food storage and gastrointestinal transit, potentially hindering the realization of their health benefits. Microencapsulation techniques have been recognized as an effective way to improve the stability of probiotics during processing and storage and allow for their localization and slow release in intestine. Although, numerous techniques have been employed for the encapsulation of probiotics, the encapsulation techniques itself and carrier types are the main factors affecting the encapsulate effect. This work summarizes the applications of commonly used polysaccharides (alginate, starch, and chitosan), proteins (whey protein isolate, soy protein isolate, and zein) and its complex as the probiotics encapsulation materials; evaluates the evolutions in microencapsulation technologies and coating materials for probiotics, discusses their benefits and limitations, and provides directions for future research to improve targeted release of beneficial additives as well as microencapsulation techniques. This study provides a comprehensive reference for current knowledge pertaining to microencapsulation in probiotics processing and suggestions for best practices gleaned from the literature.

One-pot synthesis of α-Linolenic acid nanoemulsion-templated drug-loaded silica mesocomposites as efficient bactericide against drug-resistant Mycobacterium tuberculosis

Nowadays, pathogenic infection has posed a severe threat to the public health and environmental sanitation, urging a continuous search of efficacious and safe bactericidal agents of various formulated forms. Here, a facile one-pot hydrothermal preparation of mesoporous silica nanoparticles using ultrasonication-assisted nanoemulsion of α-Linolenic acid (α-LA) as template was developed. The formed silica mesocomposite at water/fatty-acid surface provides an easy yet green synthesis route, which can be generalized for the further encapsulation of hydrophobic drugs such as antimycobacterial Rifampicin (RIF). The obtained α-LA nanoemulsion-templated silica nanoparticles (LNS NPs), with a weight content of ∼17% α-LA in the composite, showed apparent antibacterial effect against Staphylococcus aureus (S. aureus). By comparison, the removal of α-LA from the silica nanoparticles (LNS-1 NPs) resulted in the composite of enlarged pore size with negligible bactericidal activities. Notably, the Isoniazide (INH) and Rifampicin (RIF)-encapsulated LNS NPs exhibited outstanding antimycobacterial activity against both drug-sensitive and drug-resistant Mycobacterium tuberculosis (M. tuberculosis). The obtained highly biocompatible, biosafe and low-energy consumptive α-LA-contained mesostructured silica-based bactericide holds promising therapeutic potentials to tackle the emerging drug-resistant infectious microbes.

Recent progress in decontamination system against chemical and biological materials: challenges and future perspectives

Environmental contamination is one of the key issues of developing countries in recent days, and several types of methods and technologies have been developed to overcome these issues. This paper highlights the importance of decontamination in a contaminated environment that normally precedes protection, detection and identification followed by medical support. Further, this paper especially focuses on individual and collective NBC decontamination required on navy ships and correspondingly presents solutions (viable and economical) through the use of indigenously developed decontamination equipment. The paper also highlights the integration of various decontamination technologies with pre-existing ship decontamination systems, indicating the need for various decontaminants. Finally, we will also focus on new decontamination systems based on nanomaterials and enzymes and their utilization.

In Vitro Evaluation of a Fluorescent Microemulsion as an Oral Delivery Carrier and its Potential Application in Tracking Bioactive Compounds Label-Free

In this work, a microemulsion emitting fluorescence was fabricated as a potential oral delivery system for bioactive compounds. In simulated oral administration, the microemulsion was characterized for its microstructure by ¹hydrogen-nuclear magnetic resonance (¹H-NMR). Results showed that microemulsions not only have good resistance to oral and gastric phases, but also lay a solid foundation for the release of bioactive compounds in the intestine. Fluorescence stability tests showed that microemulsions exhibit a remarkable fluorescence intensity in the digestive environment, indicating feasibility as a label-free delivery carrier. Moreover, in vitro release tests of bioactive compounds confirmed that an α-linolenic acid (ALA)-loaded microemulsion mainly released in the intestine, thereby achieving the aim of controlling the release of bioactive compounds. These results suggest that the synthesized fluorescent microemulsion, combining the favorable features of nontoxicity, antidigestive stability, remarkable fluorescence intensity, and controllable release, can be regarded as a promising label-free delivery carrier for oral administration.

Antiproliferative Ability and Fluorescence Tracking of α-Linolenic Acid-Loaded Microemulsion as Label-Free Delivery Carriers in MDA-MB-231 Cells

In this work, the effects of α-linolenic acid (ALA) loaded in oil-in-water (O/W) and water-in-oil-in-water (W/O/W) microemulsions on cell viability, lactic dehydrogenase (LDH) viability, and reactive oxygen species (ROS) levels were examined using Cell Counting Kit-8 (CCK-8), an LDH assay kit, and a fluorescence microscope, respectively. The CCK-8 assay demonstrated that ALA inhibited MDA-MB-231 human breast cancer cell proliferation in a dose-dependent manner. Further, the results of LDH activity and ROS levels revealed that ALA-induced cancer cell damage was closely related to oxidative stress. Under the irradiation of ultraviolet light, the microemulsion without any added fluorescent dye would emit bright blue fluorescence, and the fluorescent images of the cells treated with ALA-loaded O/W and W/O/W microemulsions at different incubation times were taken, which exhibited long-term photostability and biocompatibility. In addition, the fluorescence mechanism of the microemulsion was explained by immobilizing surfactant molecules with aggregation-induced emission (AIE) properties at the water-oil interface through the microemulsion with a self-assembled structure. These findings showed the potential application of O/W and W/O/W microemulsions as the label-free delivery carriers in long-term imaging of living cells and real-time release monitoring of nutrients.