Rheological Behavior of Environmentally Friendly Viscoelastic Solutions Formed by a Rosin-Based Anionic Surfactant

A novel pH-responsive emulsion system stabilized by nanocelluloses modified with a rosin-based charge-reversible surfactant

Nanocelluloses as a natural polysaccharide nanoparticle are widely used in preparing Pickering emulsions, but less involved in stimuli-responsive Pickering emulsions, due to complicated covalent modification. In this study, a novel pH-responsive emulsion system was prepared using nanocellulose hydrophobized in situ with a unique pH-responsive surfactant (MPAA) derived from rosin. The headgroup charge of MPAA could be reversibly switched between a cationic form (MPAAH) and an anionic form (MPAANa) via adjusting pH, both of which had excellent water solubility. In acidic condition (pH 4.0), the negatively charged nanocellulose could be hydrophobized in situ by absorbing the cationic MPAAH, and stable and high-viscosity Pickering emulsion gels were obtained. In alkaline condition (pH 10.0), the nanocellulose dispersed in aqueous phase and formed thick aqueous lamellae with negative charge, preventing the flocculation and coalescence of the negatively charged droplets, and oil-in-dispersion emulsions with smaller droplet size and low viscosity were formed. The corresponding properties, such as droplet size, stability, and viscosity could be easily controlled by changing pH. Importantly, MPAA and nanocellulose could be separated and reused multiple times. The work proposed an effective method to achieve multiple recycling and reuse of emulsifiers, showing good economic benefits and potential sustainable applications.

Worm-like Micelle Formation of Sugar-Based Nonionic Surfactant with Multibranched Methyl Chains

The aggregation properties of sugar-based surfactants with methyl groups at multiple positions on the linear alkyl chain are an understudied topic. Therefore, in this study, we performed a structural analysis of aggregates formed by two types of sugar-based nonionic surfactants with multibranched methyl chains, 3,7,11-trimethyldodecyl maltoside (bC15Mal), as well as with a linear chain, dodecyl-β-d-maltoside (C12Mal), in aqueous solutions using rheological and small-angle X-ray scattering techniques. bC15Mal showed an excellent performance in lowering surface tension (28.5 mN m-1), exhibiting efficient adsorption and orientation at the air/water interface. bC15Mal formed rod-like micelles at a concentration of 10 mmol dm-3 in aqueous solutions and transitioned to worm-like micelles at 50 mmol dm-3, followed by gel solutions at 700 mmol dm-3. As the surfactant concentration increased, the length of the worm-like micelles decreased, and the mesh size decreased, indicating that the strings were densely packed. Conversely, C12Mal formed ellipsoidal micelles over a wide range of concentrations from 50 to 700 mmol dm-3. The major axis of the core and the overall axis of the ellipsoidal micelles decreased with increasing concentrations. Thus, it was clear that the introduction of methyl groups at positions 3, 7, and 11 of the dodecyl chain of the sugar-based surfactant resulted in a unique aggregation behavior, that is, the formation of aggregates with high-order structures at low concentrations.

Application progress of rosin in food packaging: A review

Foodborne illness caused by Gram bacteria is the most important food safety issue worldwide. Food packaging film is a very important means to extend the shelf life of food. It reduces microbial contamination and provides food safety assurance during the sales process. However, the food packaging material is derived from plastic. Most plastics are not only non-degradable but also harmful to human health. Biodegradable natural polymers are an ideal substitute, but their poor mechanical properties, hydrophilicity and weak antibacterial properties limit their applications. Rosin is an oily pine ester in the pine family, which is a natural renewable resource with a wide range of sources. It is widely used in various fields, such as surfactants, adhesives, drug loading, antibacterial, etc. However, there are only a few reports on the application of rosin in food packaging. It is worth noting that the unique hydrogenated phenanthrene ring structure of rosin can enhance the thermal stability, hydrophobicity and antibacterial properties of food packaging. More importantly, rosin has a wide range of sources, good biocompatibility, and can be degraded in nature. These advantages are conducive to the application of rosin in food packaging. However, previous reviews focused on resins, silicone rubbers and surfactants. In this review we will focus on the application of rosin in food packaging.

CO2-Responsive Rosin-Based Supramolecular Hydrogels: Diverse Chiral Nanostructures and Their Application in In Situ Synthesis of Chiral Gold Nanoparticles

Natural small molecules have demonstrated tremendous potential for the construction of supramolecular chiral nanostructures owing to their unique molecular structures and chirality. In this study, novel CO2-responsive supramolecular hydrogels were constructed using a series of rosin-based surfactants (CnMPAN, n = 10, 12, and 14). The macroscopic properties, rheological properties, nanostructures, and intermolecular interactions of the hydrogels were investigated using differential scanning calorimetry, rotational rheometry, cryogenic transmission electron microscopy, and Fourier transform infrared spectroscopy. Interestingly, diverse nanostructures containing helical nanofibers, interwoven nanofibers, and twisted nanoribbons were formed in the hydrogels, which were rarely observed in reported supramolecular hydrogels, and the strength of the hydrogels was significantly enhanced by increasing the CnMPAN concentration and the alkyl chain length. The obtained hydrogels exhibited excellent CO2-responsiveness, with no obvious variation in the nanostructures and rheological properties after response to CO2/N2 for five cycles. Taking advantage of the chiral nanostructures of hydrogels, gold nanoparticles (GNPs) were further prepared. The average particle sizes of the resulting GNPs were as low as 2.5 nm, and the GNPs also had a chiral structure. It is worth noting that no additional reductants and UV-light irradiation were used during the reduction process of GNPs. This study emphasizes that the unique molecular structure and chirality of rosin are critical for the preparation of hydrogels with chiral nanostructures. In addition, this study enriches the applications of forest resources.

Pickering Emulsions and Viscoelastic Solutions Constructed by a Rosin-Based CO2-Responsive Surfactant

Designing stimulus-switch viscoelastic solutions and Pickering emulsions with reversible CO2-responsive behavior remains a challenge. A rosin-based CO2-responsive surfactant, N-cetyl-maleimidepimaric acid N,N-dimethylenediamide (C16MPAN), was synthesized and used to prepare CO2-triggered viscoelastic solutions and Pickering emulsions. This surfactant exhibited excellent CO2-responsive performance in water and formed a viscoelastic solution. This viscoelastic system was investigated by dynamic light scattering (DLS), rheology, and cryogenic transmission electron microscopy (Cory-TEM). The shear viscosity of the system increased by 3-4 orders of magnitude after bubbling with CO2 and a large number of elongated, flexible, tubular wormlike micelles were observed. Further, Pickering emulsions were prepared by C16MPAN+ synergistically with cellulose nanocrystals (CNCs), whose stability and switchability were investigated via adsorption isotherm, droplet size, contact angle, and macroscopic photographs. C16MPAN+ was adsorbed with CNCs to form mechanical barriers at the oil-water interface, making the emulsion stable for at least three months, and desorption from CNCs enabled emulsion breaking. The cycle could be switched reversibly multiple times and the particle size distribution of emulsion was basically the same. This work enriches the application of biomass resources in intelligent responsive materials.

Ecofriendly Viscoelastic Solutions Formed from a Recyclable Rosin-Based Amine Oxide Surfactant

Innovations in molecular structures formed using bioresources are efficient means to prepare surfactant aggregates with unique properties. Here, a rosin-based amine oxide surfactant (R-11-3-AO) containing large hydrophobic groups was synthesized from rosin derivatives, namely, dehydroabietic acid and long-chain amino acids. Cryo-transmission electron microscopy showed that R-11-3-AO molecules formed extremely long wormlike micelles with a cross-sectional diameter of 4-5 nm at a concentration of approximately 7 mmol·L^-1. A gel-like system was obtained at approximately 30 mmol·L^-1 due to the dense entanglement of the wormlike micelles. The solutions also exhibited unique shear thickening behavior at a shear rate of approximately 10 s^-1 even at high concentrations. The large hydrophobic group contained in R-11-3-AO is the origin of the strong van der Waals interactions between the surfactant molecules, resulting in the rapid growth of wormlike micelles. This rosin-based surfactant is the first recoverable amine oxide surfactant from solutions through the salting-out effect with high recovery rates. This work demonstrates the unique capabilities of rosin-based surfactants for forming wormlike micelles and provides opportunities for the development of surfactant recovery technologies.

Strain-induced orientation facilitates the fabrication of highly stretchable and tough xylan-based hydrogel for strain sensors

Stretchable and tough polysaccharide-based functional hydrogels have gained popularity for various applications. However, it still remains a great challenge to simultaneously own satisfactory stretchability and toughness, particularly when incorporating renewable xylan to offer sustainability. Herein, we describe a novel stretchable and tough xylan-based conductive hydrogel utilizing the natural feature of rosin derivative. The effect of different compositions on the mechanical properties and the physicochemical properties of corresponding xylan-based hydrogels were systematically investigated. Owing to the multiple non-covalent interactions among different components to dissipate energies and the strain-induced orientation of rosin derivative during the stretching, the highest tensile strength, strain, and toughness of xylan-based hydrogels could reach 0.34 MPa, 2098.4 %, and 3.79 ± 0.95 MJ/m³, respectively. Furthermore, by incorporating MXene as the conductive fillers, the strength and toughness of hydrogels were further enhanced to 0.51 MPa and 5.95 ± 1.19 MJ/m³. Finally, the synthesized xylan-based hydrogels were able to serve as a reliable and sensitive strain sensor to monitor the movements of human beings. This study provides new insights to develop stretchable and tough conductive xylan-based hydrogel, especially utilizing the natural feature of bio-based resources.

Rheological behavior of thread-like fiber solutions formed from a rosin-based surfactant with two head groups

Wormlike micelles are conventional aggregates that exist in viscoelastic solutions. However, to achieve a solution with prominent viscoelasticity, rather high concentrations of surfactants are usually required due to the flexibility of aggregates in solution. If thread-like aggregates with rigidity can be formed by surfactants, the solutions are expected to show strong viscoelasticity at very low surfactant concentrations. Herein, A novel rosin-based quaternary ammonium surfactant with two head groups (abbreviated as R-11-3-DA) was synthesized. Cryogenic transmission electron microscopy (Cryo-TEM) images showed that flexible nanofibers with diameters of about 7-8 nm and lengths of over 1 μm were formed in the 1 : 1.5 R-11-3-DA : SL solutions. The rigidity of the aggregates seems to be inherited from the rigidity of the surfactant molecules. The novel aggregates endow the solutions with remarkable viscoelasticity at very low concentrations, with a critical overlap concentration of 0.01 wt% and a critical gelling concentration of 0.58 wt%. The rheological behavior of the solutions also shows excellent shear resistance and weak sensitivity to temperature below the critical gelation temperature (T_gel). This work reveals the advantages of viscoelastic solutions containing flexible nanofibers. The design principles of new molecular structures and system compositions can be applied to the preparation of smart soft materials based on the self-assembly of molecules.

Molecular Design, Supramolecular Assembly, and Excellent Dye Adsorption Capacity of Natural Rigid Dehydroabietic Acid-Tailored Amide Organogelators

It is very appealing to synthesize functional soft materials from natural and abundant plant diterpenes because they have conformationally rigid and chiral properties. Herein, dehydroabietic-based monoamide (DA-1) and diamide (DA-2) were designed by introducing device interactions, π-π stacking and hydrogen bonding, with an aromatic group, C═O, and N-H. DA-1 and DA-2 can be gelled in a mixed solvent and a single solvent, respectively. Several novel supramolecular organic gels including highly entangled three-dimensional networks composed of rods or fibers were constructed. Interestingly, DA-2 forms a helical structure that is right-handed under the cooperative control of the solvent and the rigid structure of rosin. Gel formation was primarily driven by hydrogen bonding, π-π stacking, and van der Waals force. Combined with Gaussian calculation and X-ray diffraction (XRD), we established pack patterns for each system, revealing the roles played by rosin and amide groups. Moreover, the carbon tetrachloride gel of DA-2 can effectively remove Congo red in an aqueous solution, and the removal rate can reach 98.4%. This research explores an efficient organic gel for adsorbing Congo red dye with the secretions of pine trees.

Water-in-Oil Emulsion Gels Stabilized by a Low-Molecular Weight Organogelator Derived from Dehydroabietic Acid

High concentrations of surfactants or gelators are usually necessary to prepare emulsions gels with unusual physicochemical properties. This situation may be improved by innovating the aggregate morphology in systems. Herein, a rosin-based molecule is designed and synthesized using dehydroabietic acid as the starting material (denoted as R-Lys-R). The molecule acts as an effective organogelator and can gelate several hydrocarbon compounds with a minimum gelation concentration of 0.2% (w/v). Analysis using atomic force microscopy (AFM) and circular dichroism (CD) reveals that in n-decane, R-Lys-R forms left-handed helical fibers with a cross-sectional diameter of approximately 15 nm. The directional hydrogen bonding of the amide group is helpful to the formation of aggregates. At concentrations of R-Lys-R above 2%, water-in-oil emulsions are transformed into emulsion gels owing to the aptitude of R-Lys-R in gelating the oil phase. The concentrations of the emulsifier can be adjusted to obtain emulsion gels with different formulations. This work reveals the potential of rosin derivatives for the formation of small molecular weight organogels and provides a novel method for the utilization of natural resources in soft materials and home care products.

Novel Temperature-Responsive Rosin-Derived Supramolecular Hydrogels Constructed by New Semicircular Aggregates

A highly water-soluble rosin-based surfactant (C₁₄-MPA-Na) was synthesized. Novel temperature-responsive supramolecular hydrogels were further prepared using C₁₄-MPA-Na. The microstructure and the mechanical properties of the hydrogels were investigated. Unexpectedly, instead of the long one-dimensional structure, a new kind of twisted semicircular aggregate was formed in the hydrogels, which was rarely reported. Besides, the hydrogels possessed excellent shear-recovery properties. Upon heating to 40 °C, the hydrogels transformed into viscoelastic solutions, which were constructed by worm-like micelles. By adjusting the temperature, the hydrogels and the viscoelastic solutions could be freely transformed. Nuclear magnetic resonance spectroscopy and Fourier transform infrared spectroscopy were used to further explore the possible self-assembly mechanism of C₁₄-MPA-Na. The curved alkane chain which partially overlapped with rosin's rigid skeleton became stretched when heated to 40 °C. The introduction of the rosin rigid skeleton endowed the supramolecular hydrogels with a novel microstructure and contributed to the development of strategies for the utilization of forest resources.

Chiral Quaternary Ammoniums Derived from Dehydroabietylamine: Synthesis and Application to Alkynylation of Isatin Derivatives Catalyzed by Silver

Abietic acid and its derivatives have broadly been used in fine chemicals and are renewable resources. Its inherent chiral rigid tricyclic phenanthrene skeleton is unique. Its utilities in asymmetric catalysis remain to be explored. A series new amide-type chiral quaternary ammoniums bearing dehydroabietylamine were designed, and prepared by two convenient steps. Acylation of dehydroabietylamine with bromoacetyl chloride afforded amide holding bromoacetyl group in higher yields using triethyl amine as base. Subsequent quaternization reaction gave the desired amide-type chiral quaternary ammoniums. The new chiral quaternary ammoniums can be used as phase-transfer catalyst (PTC) for the transition metal-catalysed alkynylation of isatin derivatives.

Photoresponsive Viscoelastic Solutions Based on Chiral Wormlike Micelles in Mixed Solutions Containing an Amphiphile Derived from Rosin

A novel rosin-based photoresponsive anionic amphiphile, sodium N-azophenyl maleopimaric acid imide carboxylate (AzoMPCOONa), has been successfully synthesized. Its molecular structure was characterized by ¹H and ¹³C NMR and mass spectrometry (MS). The photoisomerization of AzoMPCOONa was evaluated by ultraviolet (UV)-visible spectrometry and ¹H NMR. The structure of AzoMPCOONa could be converted between the trans and cis isomers by irradiation with UV/visible light. Importantly, a fascinating photoresponsive viscoelastic solution was prepared by mixing AzoMPCOONa and cetyltrimethylammonium bromide (CTAB). The properties of the photoresponsive viscoelastic solution were further investigated by rheology, circular dichroism (CD), and cryogenic transmission electron microscopy (cryo-TEM). Initially, the AzoMPCOONa/CTAB system was a gel-like solution composed of entangled wormlike micelles possessing the right-handed chiral structure. After UV irradiation for 10 min, the gel-like solution transformed into a slightly viscous solution, its zero-shear viscosity dramatically reduced by 2 orders of magnitude, and the aggregates were converted into rod-like micelles and spherical micelles. In addition, the right-handed chiral structure of the aggregates disappeared. These dramatic changes in the viscosity and the aggregate structure can be attributed to the photoisomerization of the azobenzene group in AzoMPCOONa, which led to changes in the molecular geometry and the packing parameter of the AzoMPCOONa/CTAB system. Interestingly, the right-handed chiral structure of wormlike micelles also is photoresponsive. The results reveal the superiority of forest resources for preparing viscoelastic solutions.

Synthesis and Characterization of Surfactant for Retarding Acid-Rock Reaction Rate in Acid Fracturing

Acid fracturing is an effective method to develop ultra-low permeability reservoirs. However, the fast reaction rate reduces the effect of the acid fracturing and increases the near-well collapse risk. Therefore, it is necessary to retard the acid–rock reaction rate. In this work, we synthesized an acid-resistant Gemini zwitterionic viscoelastic surfactant (named VES-c), which has good performances such as temperature resistance, salt resistance, and shear resistance. Besides, a low concentration of VES-c increases the viscosity of the acid solution. The CO₂ drainage method was used to measure the reaction rate between the dibasic acid and dolomite/broken core. We find that the dibasic acid containing 0.3% VES-c retards the dolomite reaction rate of 3.22 times compared with only dibasic acid. Furthermore, the dibasic acid containing 0.3% VES-c exhibits uniform distribution and is not easy to adhere to the solid surface. The VES-c also is favorable to reduce the formation of amorphous calcium carbonate. Retarding the rate of acid–rock reaction and enhancing the acidification are mainly attributed to VES-c's salt-tolerance, anti-adsorption, and the property of increasing the viscosity of the solution. Hopefully, this kind of surfactant retarding reaction rate is applied to other acid–rock reactions.

Copper(II) and iron(III) complexes of chiral dehydroabietic acid derived from natural rosin: metal effect on structure and cytotoxicity

A novel optically pure dinuclear copper(II) complex of a rosin derivative dehydroabietic acid (DHA, HL) was synthesized and fully characterized. The in vitro antitumor activities of the copper(II) complex Cu2(µ2-O)(L)4(DMF)2 (1) were explored and compared with those of a trinuclear iron(III) complex [Fe3(µ3-O)(L)6(CH3OH)2(CH3O)]·H2O (2). 1 was more cytotoxic than 2, and the in vitro cytotoxicity of 1 was comparable to that of cisplatin and oxaliplatin. The metal coordination improved the cytotoxicity of DHA. 1 could arrest cycle in G1 phase and induce apoptosis in MCF-7 cell. 1 increased reactive oxygen species level, GSSG/GSH ratio, and Ca2+ production, and caused the loss of mitochondrial membrane potential (Δψm) in MCF-7 cells. The up-regulated Bax and down-regulated Bcl-2 expression levels, caspase-9/caspase-3 activation, and the release of Cyt c demonstrate that 1 triggered mitochondria-mediated intrinsic apoptosis in MCF-7 cells. Caspase-8/caspase-4 activation and up-regulated Fas expression indicate that death receptor-mediated extrinsic apoptosis was included. Comet assay and up-regulated γ-H2AX and p53 expressions confirmed that 1 caused DNA damage in MCF-7 cells. Moreover, 1 led to enhancement of the biomarker of lipid peroxidation and the indicator of protein carbonylation in MCF-7 cells. All the results suggest that 1 could kill MCF-7 cells by generating oxidative stress, impairing DNA, promoting lipid peroxidation and protein carbonylation, and inducing apoptosis and autophagy. Furthermore, 1 also displayed antimetastatic activities with inhibition of cell invasion and migration, together with antiangiogenesis properties. On the whole, copper complex based on rosin derivatives is worth developing as metal-based antitumor drugs.

Discovery of novel dehydroabietic acid derivatives as DNA/BSA binding and anticancer agents

To explore the biological properties of rosin derivatives, two dehydroabietic acid derivatives N-(5-dehydroabietyl-1,3,4-thiadiazole)-yl-pyridine-2-carboxamide (DTPC) and di-N-(5-dehydroabietyl-1,3,4-thiadiazole)-yl-pyridine-2,6-carboxamide (DDTPC) with 1,3,4-thiadiazole, pyridine and amide moieties were designed and synthesized according to superposition principle of activity group. They interact with calf thymus DNA (CT DNA) via intercalation based on the results of circular dichroism (CD) and fluorescence spectroscopy, DNA denaturation and viscosity studies. Fluorescence and CD spectral experiments indicate that they might be transported and stored by protein like bovine serum albumin (BSA). MTT assay was further carried out to examine their cytotoxicity, they both showed selective cytotoxicity and DTPC exhibited better cytotoxicity. The antiproliferative effect of DTPC toward A431 cell line was stronger than that of clinically used cisplatin and oxaliplatin. In addition, the cytotoxicity of DTPC and DDTPC was closely related with their DNA binding ability.

Rosin-based chiral wormlike Micelles: Rheological behavior and its application in preparing ultrasmall gold nanoparticles

Innovations in surfactant structures are a feasible way to prepare unique molecular aggregates with interesting properties. Herein, taking dehydroabietic acid as the starting material, a new amine oxide surfactant, abbreviated as R-8-AO, was synthesized. Cryogenic transmission electron microscopy (cryo-TEM) images and circular dichroism (CD) spectra reveal that at suitable concentrations, R-8-AO molecules form rarely discovered right-handed chiral wormlike micelles, which have a cross-sectional diameter of 5-6 nm. The overlap concentration of R-8-AO is approximately 8 mM, above which the wormlike micelles began to entangle in solutions. Due to the strong van der Waals forces between R-8-AO molecules, the scaling law gives an exponent of 7.88, which is higher than the theory predicted value. Gold nanoparticles were synthesized in-situ by irradiating mixed solutions of HAuCl₄ and wormlike micelles formed by R-8-AO with UV light. These ultrasmall spherical gold nanoparticles, which are located at the surface of wormlike micelles, have a uniform particle size of 3 ± 1 nm, as observed by TEM. In addition, the gold nanoparticles form a worm-like morphology induced by the wormlike micelles, showing soft-aggregate-directed nanoparticle assembly. This work is first to reveal the effectiveness of preparing ultrasmall gold nanoparticles with new morphological wormlike micelles as soft templates. The resulting organic-inorganic hybrid aggregates are also expected to find applications in catalysis and electronic fields.

pH-Responsive Wormlike Micelles Formed by an Anionic Surfactant Derived from Rosin

A novel pH-responsive wormlike micellar viscoelastic solution was constructed by a rosin-based anionic surfactant (Na-MPA-AZO-Na) in the presence of cetyltrimethylammonium bromide (CTAB). The viscoelasticity, aggregate morphology, and pH-responsiveness of the pH-responsive wormlike micelles have been investigated through the method of rheology and cryogenic-transmission electron microscopy. Its corresponding mechanism has been studied using ¹H NMR and ¹H-¹H 2D NOESY HNMR. The zero-shear viscosity (η₀) of the wormlike micellar solution rapidly decreases by 3 orders of magnitude as the pH increases from 5.21 to 9.56. The viscoelastic fluids and water-like solutions can be converted by tuning the pH between 3.62 and 12.00, and the corresponding aggregates also transform between wormlike micelles and spherical micelles. In addition, the wormlike micellar cross-sectional diameter is approximately 10 nm, which is remarkably larger than that of the common wormlike micelles. The phenomenon can be attributed to the large steric volume of the rosin rigid skeleton. When the pH is 12.00, a "pseudo" Gemini surfactant is constructed by Na-MPA-AZO-Na and CTAB through the electrostatic interactions. Wormlike micelles also can be formed with the increasing concentrations. The η₀ of the wormlike micellar system shows strong dependence on concentration with an exponent of 9.6 (η₀ ∝ C^9.6). This work further promotes new applications of forest resources.

Supramolecular Hydrogels with Chiral Nanofibril Structures Formed from β-Cyclodextrin and a Rosin-Based Amino Acid Surfactant

The rational combination of natural molecules is expected to provide new soft material building blocks. Herein, a rosin-based amino acid surfactant was synthesized using dehydroabietic acid and l-serine as the starting materials (denoted as R-6-Ser). Supramolecular hydrogels were formed when β-cyclodextrin (β-CD) was mixed with R-6-Ser at molar ratios of over 0.5:1 and above certain concentrations. The hydrogels were investigated using rheometry, small-angle X-ray scattering, CD spectroscopy, and cryo-transmission electron microscopy (cryo-TEM). The β-CD associated with the isopropyl benzyl group of the dehydroabietic acid unit in R-6-Ser and formed R-6-Ser@β-CD complexes. The complexes and R-6-Ser self-assembled to form elongated right-handed rigid fibers with a diameter of approximately 7-8 nm, which were responsible for the elasticity of the hydrogels. This work demonstrated the feasibility of preparing supramolecular hydrogels from a diterpenoid-based surfactant and β-CD and provides a new means of utilizing the secretions of pine trees.