Quantifying Dicamba Volatility under Field Conditions: Part II, Comparative Analysis of 23 Dicamba Volatility Field Trials

Elucidating Factors Contributing to Dicamba Volatilization by Characterizing Chemical Speciation in Dried Dicamba-Amine Residues

Dicamba is a semivolatile herbicide that has caused widespread unintentional damage to vegetation due to its volatilization from genetically engineered dicamba-tolerant crops. Strategies to reduce dicamba volatilization rely on the use of formulations containing amines, which deprotonate dicamba to generate a nonvolatile anion in aqueous solution. Dicamba volatilization in the field is also expected to occur after aqueous spray droplets dry to produce a residue; however, dicamba speciation in this phase is poorly understood. We applied Fourier transform infrared (FTIR) spectroscopy to evaluate dicamba protonation state in dried dicamba-amine residues. We first demonstrated that commercially relevant amines such as diglycolamine (DGA) and n,n-bis(3-aminopropyl)methylamine (BAPMA) fully deprotonated dicamba when applied at an equimolar molar ratio, while dimethylamine (DMA) allowed neutral dicamba to remain detectable, which corresponded to greater dicamba volatilization. Expanding the amines tested, we determined that dicamba speciation in the residues was unrelated to solution-phase amine pKa, but instead was affected by other amine characteristics (i.e., number of hydrogen bonding sites) that also correlated with greater dicamba volatilization. Finally, we characterized dicamba-amine residues containing an additional component (i.e., the herbicide S-metolachlor registered for use alongside dicamba) to investigate dicamba speciation in a more complex chemical environment encountered in field applications.

Ecotoxicity studies reveal that organic cations in dicamba-derived ionic liquids can pose a greater environmental risk than the herbicide itself

The following research provides novel and relevant insights into potential environmental consequences of combination of various organic cations with commercial systemic herbicide (dicamba), in accordance with a 'herbicidal ionic liquids' (HILs) strategy. Toxicity assays of five dicamba-based HILs comprising different hydrophobic and hydrophilic cations, namely choline [CHOL][DIC], ethyl betainate [BETC2][DIC], decyl betainate [BETC10][DIC], hexadecyl betainate [BETC16][DIC] and didecyldimethylammonium [DDA][DIC]), have been tested towards bacteria (Pseudomonas putida, Escherichia coli, Bacillus subtilis), algae (Chlorella vulgaris), fresh and marine water crustaceans (Daphnia magna, Artemia franciscana). The structure of respective substituents in the cation emerged as a decisive determinant of toxicity in the case of tested species. In consequence, small ions of natural origin ([CHOL] and [BETC2]) demonstrated toxicity numerous orders of magnitude lower compared to fully synthetic [DDA]. These results emphasize the role of cations' hydrophobicity, as well as origin, in the observed acute toxic effect. Time-dependent toxicity assays also indicated that betaine-type cations comprising an ester bond can rapidly transform into less harmful substances, which can generally result in a reduction in toxicity by even several orders of magnitude. Nonetheless, these findings challenge the concept of ionic liquids with herbicidal activity and give apparent parallels to adjuvant-dependent toxicity issues recently noted in typical herbicidal formulations.

Evaluation of dicamba volatilization when mixed with glyphosate using imazethapyr as a tracer

Expansion of dicamba-resistant crops increased the frequency of off-target movement issues, especially in the midsouthern United States. Six field trials were conducted over two growing seasons with the purpose to determine the contribution of volatilization and physical suspension of particles to the off-target movement of dicamba when applied with glyphosate and imazethapyr - a non-volatile herbicide used as a tracer for physical off-target movement. Applications included dicamba at 560 g ha-1, glyphosate at 1260 g ha-1, and imazethapyr at 105 g ha-1. Applicators include glyphosate with dicamba to increase the spectrum of weed control from these applications; however, this addition increases potential for dicamba volatilization. Following application of the mixture, air samplers were placed in the field to collect dicamba and imazethapyr. Results showed there was at least 50 times more dicamba than imazethapyr detected even though the dicamba:imazethapyr ratio applied was 5.3:1. Dicamba was detected in the treated area and the off-site locations and all intervals of air sampling, ranging from 126 to 5990 ng. No more than 37.5 ng of imazethapyr was detected during the first 24-h after application (HAA) inside the treated area. Imazethapyr was only detected in 9 of the 20 sampling combinations during these experiments, and most of these detections (6) occurred during the first 24 HAA and inside the treated area. While some movement from the suspension of particles occurred based on the detection of imazethapyr in air samples, results show that most dicamba detection was due to the volatilization of the herbicide.

Conversations about the Future of Dicamba: The Science Behind Off-Target Movement

Dicamba is an important herbicide for controlling post-emergent resistant weeds in soybean farming. Recently, the scientific community and general public have further examined off-target transport mechanisms (e.g., spray drift, volatilization, and tank contamination) and the visual responses of soybeans to ultralow dicamba concentrations. This paper synthesizes key chemical concepts and environmental processes associated with dicamba formulations, transport mechanisms, drift measurements, and plant responses. This paper proposes additional areas of research and actions to increase our understanding and communicate the science findings, which should provide farmers with more robust tools and practices for sustainable dicamba use.

Evaluation of a Stable Isotope-Based Direct Quantification Method for Dicamba Analysis from Air and Water Using Single-Quadrupole LC-MS

Dicamba is a moderately volatile herbicide used for post-emergent control of broadleaf weeds in corn, soybean, and a number of other crops. With increased use of dicamba due to the release of dicamba-resistant cotton and soybean varieties, growing controversy over the effects of spray drift and volatilization on non-target crops has increased the need for quantifying dicamba collected from water and air sampling. Therefore, this study was designed to evaluate stable isotope-based direct quantification of dicamba from air and water samples using single-quadrupole liquid chromatography–mass spectrometry (LC–MS). The sample preparation protocols developed in this study utilize a simple solid-phase extraction (SPE) protocol for water samples and a single-step concentration protocol for air samples. The LC–MS detection method achieves sensitive detection of dicamba based on selected ion monitoring (SIM) of precursor and fragment ions and relies on the use of an isotopically labeled internal standard (IS) (D₃-dicamba), which allows for calculating recoveries and quantification using a relative response factor (RRF). Analyte recoveries of 106–128% from water and 88–124% from air were attained, with limits of detection (LODs) of 0.1 ng mL⁻¹ and 1 ng mL⁻¹, respectively. The LC–MS detection method does not require sample pretreatment such as ion-pairing or derivatization to achieve sensitivity. Moreover, this study reveals matrix effects associated with sorbent resin used in air sample collection and demonstrates how the use of an isotopically labeled IS with RRF-based analysis can account for ion suppression. The LC–MS method is easily transferrable and offers a robust alternative to methods relying on more expensive tandem LC–MS/MS-based options.

Quantifying Dicamba Volatility under Field Conditions: Part I, Methodology

Quantitative assessment of the volatility of field applied herbicides requires orchestrated sampling logistics, robust analytical methods, and sophisticated modeling techniques. This manuscript describes a comprehensive system developed to measure dicamba volatility in an agricultural setting. Details about study design, sample collection, analytical chemistry, and flux modeling are described. A key component of the system is the interlaboratory validation of an analytical method for trace level detection (limit of quantitation of 1.0 ng/PUF) of dicamba in polyurethane foam (PUF) air samplers. Validation of field sampling and flux methodologies was conducted in a field trial that demonstrated agreement between predicted and directly measured dicamba air concentrations at a series of off-target locations. This validated system was applied to a field case study on two plots to demonstrate the utility of these methods under typical agricultural conditions. This case study resulted in a time-varying volatile flux profile, which showed that less than 0.2 ± 0.05% of the applied dicamba was volatilized over the 3-day sampling period.