Silver Nanoparticle-Infused Cotton Fiber: Durability and Aqueous Release of Silver in Laundry Water

Soil Biodegradation Resistance of Cotton Fiber Doped with Interior and Exterior Silver Nanoparticles

Engineering fibers with nanomaterials is an effective way to modify their properties and responses to external stimuli. In this study, we doped cotton fibers with silver nanoparticles, both on the surface (126 ± 17 nm) and throughout the fiber cross section (18 ± 4 nm), and examined the resistance to soil biodegradation. A reagent-free one-pot treatment of a raw cotton fabric, where noncellulosic constituents of the raw cotton fiber and starch sizing served as reducing agents, produced silver nanoparticles with a total concentration of 11 g/kg. In a soil burial study spanning 16 weeks, untreated cotton underwent a sequential degradation process-fibrillation, fractionation, and merging-corresponding to the length of the soil burial period, whereas treated cotton did not exhibit significant degradation. The remarkable biodegradation resistance of the treated cotton was attributed to the antimicrobial properties of silver nanoparticles, as demonstrated through a test involving the soil-borne fungus Aspergillus flavus. The nonlinear loss behavior of silver from the treated cotton suggests that nanoparticle depletion in the soil depends on their location, with interior nanoparticles proving durable against environmental exposure.

Biocomposite Materials Derived from Andropogon halepensis: Eco-Design and Biophysical Evaluation

This research work presents a "green" strategy of weed valorization for developing silver nanoparticles (AgNPs) with promising interesting applications. Two types of AgNPs were phyto-synthesized using an aqueous leaf extract of the weed Andropogon halepensis L. Phyto-manufacturing of AgNPs was achieved by two bio-reactions, in which the volume ratio of (phyto-extract)/(silver salt solution) was varied. The size and physical stability of Andropogon-AgNPs were evaluated by means of DLS and zeta potential measurements, respectively. The phyto-developed nanoparticles presented good free radicals-scavenging properties (investigated via a chemiluminescence technique) and also urease inhibitory activity (evaluated using the conductometric method). Andropogon-AgNPs could be promising candidates for various bio-applications, such as acting as an antioxidant coating for the development of multifunctional materials. Thus, the Andropogon-derived samples were used to treat spider silk from the spider Pholcus phalangioides, and then, the obtained "green" materials were characterized by spectral (UV-Vis absorption, FTIR ATR, and EDX) and morphological (SEM) analyses. These results could be exploited to design novel bioactive materials with applications in the biomedical field.

Intrafibrillar Dispersion of Cuprous Oxide (Cu2O) Nanoflowers within Cotton Cellulose Fabrics for Permanent Antibacterial, Antifungal and Antiviral Activity

With increasingly frequent highly infectious global pandemics, the textile industry has responded by developing commercial fabric products by incorporating antibacterial metal oxide nanoparticles, particularly copper oxide in cleaning products and personal care items including antimicrobial wipes, hospital gowns and masks. Current methods use a surface adsorption method to functionalize nanomaterials to fibers. However, this results in poor durability and decreased antimicrobial activity after consecutive launderings. In this study, cuprous oxide nanoparticles with nanoflower morphology (Cu₂O nanoflowers) are synthesized in situ within the cotton fiber under mild conditions and without added chemical reducing agents from a copper (II) precursor with an average maximal Feret diameter of 72.0 ± 51.8 nm and concentration of 17,489 ± 15 mg/kg. Analysis of the Cu₂O NF-infused cotton fiber cross-section by transmission electron microscopy (TEM) confirmed the internal formation, and X-ray photoelectron spectroscopy (XPS) confirmed the copper (I) reduced oxidation state. An exponential correlation (R² = 0.9979) between the UV-vis surface plasmon resonance (SPR) intensity at 320 nm of the Cu₂O NFs and the concentration of copper in cotton was determined. The laundering durability of the Cu₂O NF-cotton fabric was investigated, and the superior nanoparticle-leach resistance was observed, with the fabrics releasing only 19% of copper after 50 home laundering cycles. The internally immobilized Cu₂O NFs within the cotton fiber exhibited continuing antibacterial activity (≥99.995%) against K. pneumoniae, E. coli and S. aureus), complete antifungal activity (100%) against A. niger and antiviral activity (≥90%) against Human coronavirus, strain 229E, even after 50 laundering cycles.

Silver Nanoparticle-Intercalated Cotton Fiber for Catalytic Degradation of Aqueous Organic Dyes for Water Pollution Mitigation

Azo dyes are commonly used in textile color processing for their wide array of vibrant colors. However, in recent years these dyes have become of concern in wastewater management given their toxicity to humans and the environment. In the present work, researchers remediated water contaminated with azo dyes using silver nanoparticles (Ag NPs) intercalated within cotton fabric as a catalyst, for their enhanced durability and reusability, in a reductive degradation method. Three azo dyes—methyl orange (MO), Congo red (CR), and Chicago Sky Blue 6B (CSBB)—were investigated. The azo degradation was monitored by UV/vis spectroscopy, degradation capacity, and turnover frequency (TOF). The Ag NP−cotton catalyst exhibited excellent degradation capacity for the dyes, i.e., MO (96.4% in 30 min), CR (96.5% in 18.5 min), and CSBB (99.8% in 21 min), with TOFs of 0.046 min−1, 0.082 min−1, and 0.056 min−1, respectively, using a 400 mg loading of catalyst for 100 mL of 25 mg L−1 dye. To keep their high reusability while maintaining high catalytic efficiency of >95% degradation after 10 cycles, Ag NPs immobilized within cotton fabric have promising potential as eco-friendly bio-embedded catalysts.

Antibacterial surfaces: Strategies and applications

Antibacterial surfaces are surfaces that can resist bacteria, relying on the nature of the material itself. It is significant for safe food and water, human health, and industrial equipment. Biofilm is the main form of bacterial contamination on the material surface. Preventing the formation of biofilm is an efficient way to develop antibacterial surfaces. The strategy for constructing the antibacterial surface is divided into bacteria repelling and bacteria killing based on the formation of the biofilm. Material surface wettability, adhesion, and steric hindrance determine bacteria repelling performance. Bacteria should be killed by surface chemistry or physical structures when they are attached to a material surface irreversibly. Killing approaches are usually in the light of the cell membrane of bacteria. This review summarizes the fabrication methods and applications of antibacterial surfaces from the view of the treatment of the material surfaces. We also present several crucial points for developing long-term stability, no drug resistance, broad-spectrum, and even programable antibacterial surfaces.

Urea-doped carbon dots as fluorescent switches for the selective detection of iodide ions and their mechanistic study

A facile and green strategy for the fabrication of fluorescent urea-doped carbon dots (N-CDs) has been explored. Significantly, the fluorescent N-CDs could recognize iodide ions (I⁻) with high selectivity, and their photoluminescence could be efficiently quenched by the addition of I⁻. The sensitivity analysis for I⁻ indicated a linear relationship in the range from 12.5 to 587 μM with the detection limit as low as 0.47 μM. Furthermore, the I⁻ induced fluorescence (FL) quenching mechanism was investigated employing a combination of techniques, including UV-vis/fluorescence spectroscopy, Density Functional Theory (DFT) calculation, TEM and time-resolved fluorescence decay measurements. The DFT calculation results demonstrated that the amino- and amide groups of N-CDs play a significant role in iodide recognition through the formation of multiple N–H⋯I⁻, C–H⋯I⁻ and C( Created by potrace 1.16, written by Peter Selinger 2001-2019 ]]> O)N–H⋯I⁻ interactions with I⁻. The TEM experiment confirmed the aggregation process when I⁻ was added to the N-CDs solution. Moreover, the radiative decay rate of N-CDs, which was first measured and reported the kinetic behaviors of the FL-quenching process, decreased from 3.30 × 10⁷ s⁻¹ to 1.95 × 10⁷ s⁻¹ after the coordination with I⁻ ions. The reduced lifetime demonstrated that the excited energy dissipation led to a dynamic quenching process. Therefore, such carbon materials can function as effective fluorescent switches for the selective detection of I⁻ ions.

Urea-doped carbon dots (N-CDs) have been successfully fabricated for monitoring iodide ions; the reduced lifetime of N-CDs demonstrated that the excited energy dissipation led to a dynamic fluorescence quenching process.

Silver, copper and copper oxide nanoparticles in the fight against human viruses: progress and perspectives

The rapid development of nanomedicine has created a high demand for silver, copper and copper oxide nanoparticles. Due to their high reactivity and potent antimicrobial activity, silver and copper-based nanomaterials have been playing an important role in the search for new alternatives for the treatment of several issues of concern, such as pathologies caused by bacteria and viruses. Viral diseases are a significant and constant threat to public health. The most recent example is the pandemic caused by the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). In this context, the object of the present review is to highlight recent progress in the biomedical uses of these metal nanoparticles for the treatment and prevention of human viral infections. We discuss the antiviral activity of AgNPs and Cu-based NPs, including their actions against SARS-CoV-2. We also discuss the toxicity, biodistribution and excretion of AgNPs and CuNPs, along with their uses in medical devices or on inert surfaces to avoid viral dissemination by fomites. The challenges and limitations of the biomedical use of these nanoparticles are presented.