Theoretical Design of D-π-A-A Sensitizers with Narrow Band Gap and Broad Spectral Response Based on Boron Dipyrromethene for Dye-Sensitized Solar Cells

Exploration of charge transfer analysis and photovoltaics properties of A-D-A type non-fullerene phenazine based molecules to enhance the organic solar cell properties

To intensify the photovoltaic properties of organic solar cells, density functional theory (DFT) based computational techniques were implemented on six non-fullerene A-D-A type small molecules (N1-N6) modified from reference molecule (R) which consists of phenazine fused with 1,4- Dimethyl-4H-3,7-dithia-4-aza- cyclopenta [α] pentalene on both sides with one of its phenyl rings acting as the central donor unit, further attached with 2-(5,6-Difluoro-2-methylene-3-oxo-indan-1-ylidene)-malononitrile acceptor groups at terminal sites. All proposed compounds have a phenazine base modified with a variety of substituents at the terminals. Transition density matrix, density of states, frontier molecular orbitals, intramolecular charge transfer abilities and optoelectronic properties of these compounds were investigated using B3LYP/6-31G (d, p) and B3LYP/6-31G++ (d,p) level of theory. All six designed compounds exhibited a bathochromic sift in their λmax as compared to the R molecule. All designed molecules also have reduced band gap and smaller excitation energy than R. Among all, N6 exhibited highest λmax and lowest bandgap as compared to reference molecule indicating its promising photovoltaic properties. Decreased hole and electron reorganization energy in several of the suggested compounds is indicative of greater charge mobility in them. PTB7-Th donor was employed to calculate open circuit voltage of all investigated molecules. N1-N5 molecules had improved optoelectronic properties, significant probable power conversion efficiency as evident from their absorption aspects, high values of Voc, and fill factor, compared to R molecule. Designed A-D-A type NF based molecules make OSCs ideal for use in wearable devices, building-integrated photovoltaics and smart fabrics.

UV-selective organic absorbers for the cosensitization of greenhouse-integrated dye-sensitized solar cells: synthesis and computational study

Molecular cosensitization is favorable for manipulating solar radiation through the judicious choice of cosensitizers having complementary absorption spectra. For greenhouse-integrated dye-sensitized solar cells (DSCs), the manipulation of solar radiation is crucial in order to maximize the flow of photosynthetically active radiation (PAR) for the effectual photosynthetic activity of plants; meanwhile, non-PAR is utilized in agrivoltaics for generating electricity. In this study, we report the synthesis of novel four UV-selective absorbers, based on the diimide scaffold, functionalized with carboxylate and pyridyl anchoring groups, for adequate adsorption onto the TiO₂ electrode in DSC. The UV/Vis absorption spectra of the DMF solution-based free dyes were measured experimentally. Basic photophysical and energetics requirements for operating greenhouse-integrated DSCs were examined at the molecular level via (time-dependent) density functional theory-based calculations. The computational results revealed the outperformance of the biphenyldiimide-structured DI-CA1 dye, especially for maximum charge transferred to its anchor, lower thermodynamic barrier for dissociating the photogenerated exciton, largest Stokes' shift, strong electronic coupling with TiO₂ nanoparticles, and higher degree of charge separation at the DI-CA1/TiO₂ interface. PDOS showed deeper existence for the LUMO level in the CB of TiO₂, which expedites the electron injection process. The chemical and optical compatibility of DI-CA1 were then investigated as a potential cosensitizer of a reference BTD-DTP1, a green light-absorbing dye. Considerable overlap between the fluorescence spectrum of DI-CA1 and absorption spectrum of the reference BTD-DTP1 advocated the opportunity of excitation energy transfer via the radiative trivial reabsorption mechanism, which confirms the cosensitization functionality. Energy decomposition analysis and reduced density gradient maps estimated the chemical compatibility owing to weak dispersion interactions as the dominant stabilizing attractive force. This noncovalent functionalization retains the chemical compatibility without distorting the π-π conjugation and the associated physicochemical properties of the individual dye molecules. Along with the expanded consumption of non-photosynthetically active solar radiation, an improved power conversion efficiency of greenhouse-integrated DSC is accordingly expected.

Accurate predictions of the electronic excited states of BODIPY based dye sensitizers using spin-component-scaled double-hybrid functionals: a TD-DFT benchmark study

The vertical excitation energies of 13 BODIPY based dye sensitizers are benchmarked by means of TD-DFT, using 36 functionals from different DFT rungs. Most TD-DFT results were found to overestimate the excitation energies, and show mean absolute error (MAE) values in the range 0.2-0.5 eV. The dispersion-corrected, spin-component-scaled, double-hybrid (DSD) functionals DSD-BLYP and DSD-PBEP86 were found to have the smallest MAE values of 0.083 eV and 0.106 eV, respectively, which is close to the range of average errors found in the more expensive coupled-cluster methods. Moreover, DSD-BLYP and DSD-PBEP86 functionals show excellent consistency and quality of results (standard deviation = 0.048 eV and 0.069 eV respectively). However, the range separated hybrid (RSH) and the range separated double hybrid (RSDH) functionals were found to provide the best predictability (linear determination coefficient R 2 > 0.97 eV).

Synthesis and Computational Characterization of Organic UV-Dyes for Cosensitization of Transparent Dye-Sensitized Solar Cells

The fabrication of colorless and see-through dye-sensitized solar cells (DSCs) requires the photosensitizers to have little or no absorption in the visible light region of the solar spectrum. However, a trade-off between transparency and power conversion efficiency (PCE) has to be tackled, since most transparent DSCs are showing low PCE when compared to colorful and opaque DSCs. One strategy to increase PCE is applying two cosensitizers with selective conversion of the UV and NIR radiation, therefore, the non-visible part only is absorbed. In this study, we report synthesis of novel five UV-selective absorbers, based on diimide and Schiff bases incorporating carboxyl and pyridyl anchoring groups. A systematic computational investigation using density functional theory (DFT) and time-dependent DFT approaches was employed to evaluate their prospect of application in transparent DSCs. Experimental UV/Vis absorption spectra showed that all dyes exhibit an absorption band covering the mid/near-UV region of solar spectrum, with a bathochromic shift and a hyperchromic shifts for Py-1 dye. Computational results showed that the studied dyes satisfied the basic photophysical and energetics requirements of operating DSC as well as the stability and thermodynamical spontaneity of adsorption onto surface of TiO2. However, results revealed outperformance of the thienothiophene core-containing Py-1 UV-dye, owing to its advantageous structural attributes, improved conjugation, intense emission, large Stokes shift and maximum charge transferred to the anchor. Chemical compatibility of Py-1 dye was then theoretically investigated as a potential cosensitizer of a reference VG20-C2 NIR-dye. By the judicious selection of pyridyl anchor-based UV-absorber (Py-1) and carboxyl anchor-based NIR-absorber (VG20), the advantage of the optical complementarity and selectivity of different TiO2-adsorption-site (Lewis- and Bronsted-acidic) can be achieved. An improved overall PCE is estimated accordingly.

Rational Design of Broadly Absorbing Boron Dipyrromethene-Carbazole Dyads for Dye-Sensitized Solar Cells: A DFT Study

Structure engineering of boron dipyrromethene (BODIPY) organic dye, to increase its light-harvesting efficiency in dye-sensitized solar cells, has been the subject of rigorous research recently. Herein, we report on the rational designing of BODIPY-carbazole (D-π-A-A) dyads using density functional theory (DFT). The structure of BODIPY-carbazole was first modified by substituting an electron-donating -N(CH3)2 group at the electron-rich carbazole moiety, and two electron-accepting -COOH groups at the BODIPY core. The DFT calculations showed a significant lowering of the band gap from 2.9 eV (pristine BODIPY-carbazole dyad) to 1.87 eV (modified BODIPY-carbazole dyad). Further modification was demonstrated by the incorporation of heterocyclic rings such as thiophene (denoted as D1T), furan (D1F), and phosphole (D1P) into BODIPY-carbazole moiety, which red-shifted the light absorption spectra and consequently improved the light-harvesting efficiency of the dyes. The interactions at the dye/semiconductor interface were studied by employing their bridged-bidentate adsorption models over the titanium dioxide (TiO2)38 nanocluster. Results suggested that the electrons can be efficiently injected from the lowest unoccupied molecular orbital (LUMO) of dyes into the conduction band of TiO2. Among the three dyads, D1P exhibited superior photovoltaic performance with a maximum power conversion efficiency of 13.50%, a short-circuit current density (J sc) of 27.2 mA·cm-2, and an open-circuit voltage (V oc) of 731 mV. The structurally configured new D1P dye can be used as a potential alternative photosensitizer for high-performance dye-sensitized solar cells.

Optimizing the Cosensitization Effect of SQ02 Dye on BP-2 Dye-Sensitized Solar Cells: A Computational Quantum Chemical Study

Cosensitization of the semiconducting electrode in dye-sensitized solar cells (DSCs), with two or more light-harvesting dyes, is a chemical fabrication method that aims to achieve a panchromatic absorption spectrum emulating that of the solar emission spectrum. In this paper, SQ02 and BP-2 cosensitizers have been investigated, as isolated monomers/dimer and adsorbed monomers/dimer on the TiO₂ (101) anatase surface, by employing density functional theory (DFT) and time-dependent DFT calculations. Computed results showed that the dominant electron injection pathway is direct injection from each dye into the conduction band of TiO₂. The almost complete spectral overlap between the simulated absorption spectrum of BP-2 and fluorescence emissions of SQ02 implies that excitation energy transfer occurs between cosensitizers via the trivial reabsorption mechanism. However, the results showed very limited unidirectional intermolecular charge transfer (CT) from SQ02 dye to BP-2 dye (0.04 |e^-|). Therefore, this study also presents a stepwise molecular engineering of BP-2 dye, aiming at optimizing the cosensitization functionality. First, 14 redesigned dye candidates are reported to identify dyes with photophysical properties matching the requirements for efficient DSCs. Second, the four most promising dyes are shortlisted for testing as cosensitizers with the SQ02 dye. The molecular design factors of cosensitization that need validation are chemical compatibility, availability of CT between cosensitizers, and complementarity of the absorption spectra. This screening suggests the judicious choice of the modeled difluorenyl amine donor-based dye (BP-D4) as a very promising cosensitizer. In particular, the SQ02/BP-D4 dimer showed 10 times larger (0.53 |e^-|) unidirectional CT than that of SQ02/BP-2 dimer, in addition to the maximum increased electron population of acceptor moieties upon photoexcitation.

Theoretical design of D-π-A system new dyes candidate for DSSC application

Currently, dye-sensitized solar cells (DSSCs) are one of the energy technologies that has piqued the interest of researchers, due to their distinct characteristics such as excellent air stability, ease of synthesis and photovoltaic properties interesting. This work aims to study the optoelectronic properties and photovoltaic of six organic dyes based on phenothiazine (PTZ). The effects of bridging core modifications of recently synthesized PSB-4(R) molecule on structural, photovoltaic, electronic, and optical properties of D1-D6 are studied. Using the method Density Functional Theory (DFT) level of the B3LYP (Becke three-parameter Lee-Yang-Parr) exchange correlation functional with 6-31G (d, p) and time-dependent DFT (TD-DFT). According to the obtained results, optoelectronic properties and photovoltaic of the dyes, we can suggest that these designed molecules are better sensitizers as a candidate for the production of dye solar cells (DSSCs). This theoretical study paves the way for chemists to synthesize more efficient sensitizers for applications in dye solar cells.

Effects of heteroatoms in π-conjugated linkers on the optical and electronic properties of modified triphenylamine based dyes: towards DSSCs' applications

Optoelectronic properties of triphenylamine dyes arising from the embedded five-membered π-linkers C₄H₄X (X = O, NH, S, Se, Te) and varying anchoring groups, cyanoacrylic acid and hydantoin, in D-π-π-A model are examined. The reported properties for both, isolated dyes and dye@TiO₂ complexes, are realized through density functional theory (DFT) and time-dependent DFT. The study reveals that chalcogen doping (X = S, Se, Te) enhances absorption and fluorescent emission spectra in the visible and NIR regions. The adsorption of the dyes on the TiO₂ cluster has been simulated. Alteration of the UV-Vis spectra and electron density redistribution for the complexes from individual dyes are examined and analyzed. The binding energies relate to the nature of the heteroatoms X; the complexes dye@TiO₂ with heavier heteroatoms Se and Te demonstrate stronger binding. Graphical abstract.