Multiscale Simulation of Protein Hydration Using the SWINGER Dynamical Clustering Algorithm

Fast, Accurate, and System-Specific Variable-Resolution Modeling of Proteins

In recent years, a few multiple-resolution modeling strategies have been proposed, in which functionally relevant parts of a biomolecule are described with atomistic resolution, with the remainder of the system being concurrently treated using a coarse-grained model. In most cases, the parametrization of the latter requires lengthy reference all-atom simulations and/or the usage of off-shelf coarse-grained force fields, whose interactions have to be refined to fit the specific system under examination. Here, we overcome these limitations through a novel multiresolution modeling scheme for proteins, dubbed coarse-grained anisotropic network model for variable resolution simulations, or CANVAS. This scheme enables a user-defined modulation of the resolution level throughout the system structure; a fast parametrization of the potential without the necessity of reference simulations; and the straightforward usage of the model on the most commonly used molecular dynamics platforms. The method is presented and validated with two case studies, the enzyme adenylate kinase and the therapeutic antibody pembrolizumab, by comparing the results obtained with the CANVAS model against fully atomistic simulations. The modeling software, implemented in Python, is made freely available for the community on a collaborative github repository.

A scheme for rapid evaluation of the intermolecular three-body polarization effect in water clusters

The ability to accurately and rapidly evaluate the intermolecular many-body polarization effect of the water system is very important for computer simulations of biomolecule in aqueous. In this paper, a scheme is proposed based on the polarizable dipole-dipole interaction model and used to rapidly estimate the intermolecular many-body polarization effect in water clusters. We use a bond-dipole-based polarization function to evaluate the polarization energy. We regard two OH bonds of a water molecule as two bond-dipoles and set the permanent OH bond-dipole moment of a water molecule to be 1.51 Debye. We estimate the induced OH bond-dipole moment via a simple formula in which only one correction factor is needed. This scheme is then applied to tens of water clusters to calculate the three- and four-body interaction energies. The three-body interaction energies of 93 water clusters produced by our scheme are compared with those produced by the counterpoise-corrected CCSD(T)/aug-cc-pVDZ, MP2/aug-cc-pVDZ, M06-2X/jul-cc-pVTZ methods, by the AMOEBApro13, iAMOEBA, AMOEBA+, AMOEBA+(CF) methods, and by the MB-pol method. The four-body interaction energies of 47 water clusters yielded by our scheme are compared with those yielded by the counterpoise-corrected MP2/aug-cc-pVDZ and M06-2X/ jul-cc-pVTZ methods, by the AMOEBApro13, AMOEBA+, AMOEBA+(CF) methods, and by the MB-pol method. The comparison results show that the scheme proposed in this paper can reproduce the counterpoise-corrected CCSD(T)/aug-cc-pVDZ three-body interaction energies and reproduce the counterpoise-corrected MP2/aug-cc-pVDZ four-body interaction energies both accurately and efficiently. We anticipate the scheme proposed here can be useful for computer simulations of liquid water and aqueous solutions.

Machine learning assisted coarse-grained molecular dynamics modeling of meso-scale interfacial fluids

A hallmark of meso-scale interfacial fluids is the multi-faceted, scale-dependent interfacial energy, which often manifests different characteristics across the molecular and continuum scale. The multi-scale nature imposes a challenge to construct reliable coarse-grained (CG) models, where the CG potential function needs to faithfully encode the many-body interactions arising from the unresolved atomistic interactions and account for the heterogeneous density distributions across the interface. We construct the CG models of both single- and two-component polymeric fluid systems based on the recently developed deep coarse-grained potential [Zhang et al., J. Chem. Phys. 149, 034101 (2018)] scheme, where each polymer molecule is modeled as a CG particle. By only using the training samples of the instantaneous force under the thermal equilibrium state, the constructed CG models can accurately reproduce both the probability density function of the void formation in bulk and the spectrum of the capillary wave across the fluid interface. More importantly, the CG models accurately predict the volume-to-area scaling transition for the apolar solvation energy, illustrating the effectiveness to probe the meso-scale collective behaviors encoded with molecular-level fidelity.

Asynchronous Reciprocal Coupling of Martini 2.2 Coarse-Grained and CHARMM36 All-Atom Simulations in an Automated Multiscale Framework

The appeal of multiscale modeling approaches is predicated on the promise of combinatorial synergy. However, this promise can only be realized when distinct scales are combined with reciprocal consistency. Here, we consider multiscale molecular dynamics (MD) simulations that combine the accuracy and macromolecular flexibility accessible to fixed-charge all-atom (AA) representations with the sampling speed accessible to reductive, coarse-grained (CG) representations. AA-to-CG conversions are relatively straightforward because deterministic routines with unique outcomes are achievable. Conversely, CG-to-AA conversions have many solutions due to a surge in the number of degrees of freedom. While automated tools for biomolecular CG-to-AA transformation exist, we find that one popular option, called Backward, is prone to stochastic failure and the AA models that it does generate frequently have compromised protein structure and incorrect stereochemistry. Although these shortcomings can likely be circumvented by human intervention in isolated instances, automated multiscale coupling requires reliable and robust scale conversion. Here, we detail an extension to Multiscale Machine-learned Modeling Infrastructure (MuMMI), including an improved CG-to-AA conversion tool called sinceCG. This tool is reliable (∼98% weakly correlated repeat success rate), automatable (no unrecoverable hangs), and yields AA models that generally preserve protein secondary structure and maintain correct stereochemistry. We describe how the MuMMI framework identifies CG system configurations of interest, converts them to AA representations, and simulates them at the AA scale while on-the-fly analyses provide feedback to update CG parameters. Application to systems containing the peripheral membrane protein RAS and proximal components of RAF kinase on complex eight-component lipid bilayers with ∼1.5 million atoms is discussed in the context of MuMMI.

Solvent-scaling as an alternative to coarse-graining in adaptive-resolution simulations: The adaptive solvent-scaling (AdSoS) scheme

A new approach termed Adaptive Solvent-Scaling (AdSoS) is introduced for performing simulations of a solute embedded in a fine-grained (FG) solvent region itself surrounded by a coarse-grained (CG) solvent region, with a continuous FG ↔ CG switching of the solvent resolution across a buffer layer. Instead of relying on a distinct CG solvent model, the AdSoS scheme is based on CG models defined by a dimensional scaling of the FG solvent by a factor s, accompanied by an s-dependent modulation of the atomic masses and interaction parameters. The latter changes are designed to achieve an isomorphism between the dynamics of the FG and CG models, and to preserve the dispersive and dielectric solvation properties of the solvent with respect to a solute at FG resolution. This scaling approach offers a number of advantages compared to traditional coarse-graining: (i) the CG parameters are immediately related to those of the FG model (no need to parameterize a distinct CG model); (ii) nearly ideal mixing is expected for CG variants with similar s-values (ideal mixing holding in the limit of identical s-values); (iii) the solvent relaxation timescales should be preserved (no dynamical acceleration typical for coarse-graining); (iv) the graining level N_G (number of FG molecules represented by one CG molecule) can be chosen arbitrarily (in particular, N_G = s³ is not necessarily an integer); and (v) in an adaptive-resolution scheme, this level can be varied continuously as a function of the position (without requiring a bundling mechanism), and this variation occurs at a constant number of particles per molecule (no occurrence of fractional degrees of freedom in the buffer layer). By construction, the AdSoS scheme minimizes the thermodynamic mismatch between the different regions of the adaptive-resolution system, leading to a nearly homogeneous scaled solvent density s³ρ. Residual density artifacts in and at the surface of the boundary layer can easily be corrected by means of a grid-based biasing potential constructed in a preliminary pure-solvent simulation. This article introduces the AdSoS scheme and provides an initial application to pure atomic liquids (no solute) with Lennard-Jones plus Coulomb interactions in a slab geometry.

From adaptive resolution to molecular dynamics of open systems

ABSTRACT

We provide an overview of the Adaptive Resolution Simulation method (AdResS) based on discussing its basic principles and presenting its current numerical and theoretical developments. Examples of applications to systems of interest to soft matter, chemical physics, and condensed matter illustrate the method's advantages and limitations in its practical use and thus settle the challenge for further future numerical and theoretical developments.

Back-mapping augmented adaptive resolution simulation

Concurrent multiscale techniques such as Adaptive Resolution Scheme (AdResS) can offer ample computational advantages over conventional atomistic (AT) molecular dynamics simulations. However, they typically rely on aphysical hybrid regions to maintain numerical stability when high-resolution degrees of freedom (DOFs) are randomly re-inserted at the resolution interface. We propose an Energy Minimized AT (DOF) Insertion (EMATI) method that uses an informed rather than random AT DOF insertion to tackle the root cause of the issue, i.e., overlapping AT potentials. EMATI enables us to directly couple AT and coarse-grained resolutions without any modifications of the interaction potentials. We exemplify AdResS-EMATI in a system of liquid butane and show that it yields improved structural and thermodynamic properties at the interface compared to competing AdResS approaches. Furthermore, our approach extends the applicability of the AdResS without a hybrid region to systems for which force capping is inadequate.

Advances in molecular simulations of protein mechanical properties and function

Single-molecule force spectroscopy and classical molecular dynamics are natural allies. Recent advances in both experiments and simulations have increasingly facilitated a direct comparison of SMFS and MD data, most importantly by closing the gap between time scales, which has been traditionally at least 5 orders of magnitudes wide. In this review, we will explore these advances chiefly on the computational side. We focus on protein dynamics under force and highlight recent studies that showcase how lower loading rates and more statistics help to better interpret previous experiments and to also motivate new ones. At the same time, steadily increasing system sizes are used to mimic more closely the mechanical environment in the biological context. We showcase some of these advances on atomistic and coarse-grained scale, from asymmetric membrane tension to larger (multidomain/multimeric) protein assemblies under force.

Implicit-solvent coarse-grained modeling for polymer solutions via Mori-Zwanzig formalism

We present a bottom-up coarse-graining (CG) method to establish implicit-solvent CG modeling for polymers in solution, which conserves the dynamic properties of the reference microscopic system. In particular, tens to hundreds of bonded polymer atoms (or Lennard-Jones beads) are coarse-grained as one CG particle, and the solvent degrees of freedom are eliminated. The dynamics of the CG system is governed by the generalized Langevin equation (GLE) derived via the Mori-Zwanzig formalism, by which the CG variables can be directly and rigorously linked to the microscopic dynamics generated by molecular dynamics (MD) simulations. The solvent-mediated dynamics of polymers is modeled by the non-Markovian stochastic dynamics in GLE, where the memory kernel can be computed from the MD trajectories. To circumvent the difficulty in direct evaluation of the memory term and generation of colored noise, we exploit the equivalence between the non-Markovian dynamics and Markovian dynamics in an extended space. To this end, the CG system is supplemented with auxiliary variables that are coupled linearly to the momentum and among themselves, subject to uncorrelated Gaussian white noise. A high-order time-integration scheme is used to solve the extended dynamics to further accelerate the CG simulations. To assess, validate, and demonstrate the established implicit-solvent CG modeling, we have applied it to study four different types of polymers in solution. The dynamic properties of polymers characterized by the velocity autocorrelation function, diffusion coefficient, and mean square displacement as functions of time are evaluated in both CG and MD simulations. Results show that the extended dynamics with auxiliary variables can construct arbitrarily high-order CG models to reproduce dynamic properties of the reference microscopic system and to characterize long-time dynamics of polymers in solution.

Hybrid Atomistic and Coarse-Grained Model for Surfactants in Apolar Solvents

Here, we develop and verify the performance of a hybrid molecular modeling approach that combines coarse-grained apolar solvent and atomistic solute or polar solvent description, for example, for description of reverse micellar systems. The coarse-grained solvent model is directly applicable to organic solvents encompassing alkane, alkene, and fatty acid ester functional groups and connects directly to both standard united-atom GROMOS 53A6 and all-atom CHARMM27 force fields, as well as the atomistic detail water models compatible with these force fields. The different levels of description are coupled via explicit, unscaled electrostatics, and scaled mixing rules for dispersive interactions. The hybrid model is in near-quantitative agreement with fully atomistic simulations when combined with the CHARMM27 model but underestimates modestly surfactant aggregation when using GROMOS 53A6 united-atom description. The use of truncated electrostatics affords up to a 9-fold increase in computational speed without significant loss of accuracy. However, long-range electrostatic calculations and load imbalance at high core counts can significantly degrade the performance. We demonstrate the usability of the hybrid model by assessing the reverse micelle formation of a homologous series of nonionic glycerolipids via large-scale self-assembly simulations. The presented model is demonstrated here for accurate description of surfactant systems in apolar solvents, with and without also polar solvent (water) in the system. The formulation can be expected to describe well also other solute species or interfaces with an apolar solvent in an apolar environment.

SWINGER: a clustering algorithm for concurrent coupling of atomistic and supramolecular liquids

In this contribution, we review recent developments and applications of a dynamic clustering algorithm SWINGER tailored for the multiscale molecular simulations of biomolecular systems. The algorithm on-the-fly redistributes solvent molecules among supramolecular clusters. In particular, we focus on its applications in combination with the adaptive resolution scheme, which concurrently couples atomistic and coarse-grained molecular representations. We showcase the versatility of our multiscale approach on a few applications to biomolecular systems coupling atomistic and supramolecular water models such as the well-established MARTINI and dissipative particle dynamics models and provide an outlook for future work.

Open-Boundary Molecular Mechanics/Coarse-Grained Framework for Simulations of Low-Resolution G-Protein-Coupled Receptor-Ligand Complexes

G-protein-coupled receptors (GPCRs) constitute as much as 30% of the overall proteins targeted by FDA-approved drugs. However, paucity of structural experimental information and low sequence identity between members of the family impair the reliability of traditional docking approaches and atomistic molecular dynamics simulations for in silico pharmacological applications. We present here a dual-resolution approach tailored for such low-resolution models. It couples a hybrid molecular mechanics/coarse-grained (MM/CG) scheme, previously developed by us for GPCR-ligand complexes, with a Hamiltonian-based adaptive resolution scheme (H-AdResS) for the solvent. This dual-resolution approach removes potentially inaccurate atomistic details from the model while building a rigorous statistical ensemble-the grand canonical one-in the high-resolution region. We validate the method on a well-studied GPCR-ligand complex, for which the 3D structure is known, against atomistic simulations. This implementation paves the way for future accurate in silico studies of low-resolution ligand/GPCRs models.

The physics of open systems for the simulation of complex molecular environments in soft matter

Molecular dynamics (MD) has become one of the most powerful tools of investigation in soft matter. Despite such success, simulations of large molecular environments are mostly run using the approximation of closed systems without the possibility of exchange of matter. Due to the molecular complexity of soft matter systems, an optimal simulation strategy would require the application of concurrent multiscale resolution approaches such that each part of a large system can be considered as an open subsystem at a high resolution embedded in a large coarser reservoir of energy and particles. This paper discusses the current capability and the future perspectives of multiscale adaptive resolution MD methods to satisfy the conceptual principles of open systems and to perform simulations of complex molecular environments in soft matter.

Discrete and Continuum Models for the Salt in Crowded Environments of Suspended Charged Particles

Electrostatic forces greatly affect the overall dynamics and diffusional activities of suspended charged particles in crowded environments. Accordingly, the concentration of counter- or co-ions in a fluid-''the salt"-determines the range, strength, and order of electrostatic interactions between particles. This environment fosters engineering routes for controlling directed assembly of particles at both the micro- and nanoscale. Here, we analyzed two computational modeling schemes that considered salt within suspensions of charged particles, or polyelectrolytes: discrete and continuum. Electrostatic interactions were included through a Green's function formalism, where the confined fundamental solution for Poisson's equation is resolved by the general geometry Ewald-like method. For the discrete model, the salt was considered as regularized point-charges with a specific valence and size, while concentration fields were defined for each ionic species for the continuum model. These considerations were evolved using Brownian dynamics of the suspended charged particles and the discrete salt ions, while a convection-diffusion transport equation, including the Nernst-Planck diffusion mechanism, accounted for the dynamics of the concentration fields. The salt/particle models were considered as suspensions under slit-confinement conditions for creating crowded "macro-ions", where density distributions and radial distribution functions were used to compare and differentiate computational models. Importantly, our analysis shows that disparate length scales or increased system size presented by the salt and suspended particles are best dealt with using concentration fields to model the ions. These findings were then validated by novel simulations of a semipermeable polyelectrolyte membrane, at the mesoscale, from which ionic channels emerged and enable ion conduction.

A multi-resolution particle/fluctuating hydrodynamics model for hybrid simulations of liquids based on the two-phase flow analogy

A triple-scale model of a molecular liquid, where atomistic, coarse-grained, and hydrodynamic descriptions of the same substance are consistently combined, is developed. Following the two-phase analogy method, the continuum and discrete particle representations of the same substance are coupled together in the framework of conservation laws for mass and momentum that are treated as effective phases of a nominally two-phase flow. The effective phase distribution, which governs the model resolution locally, is a user-defined function. In comparison with the previous models of this kind in the literature which used the classical Molecular Dynamics (MD) for the particulate phase, the current approach uses the Adaptive Resolution Scheme (AdResS) and stochastic integration to smoothen the particle transition from non-bonded atom dynamics to hydrodynamics. Accuracy and robustness of the new AdResS-Fluctuating Hydrodynamics (FH) model for water at equilibrium conditions is compared with the previous implementation of the two-phase analogy model based on the MD-FH method. To demonstrate that the AdResS-FH method can accurately support hydrodynamic fluctuations of mass and momentum, a test problem of high-frequency acoustic wave propagation through a small hybrid computational domain region is considered.

DeePCG: Constructing coarse-grained models via deep neural networks

We introduce a general framework for constructing coarse-grained potential models without ad hoc approximations such as limiting the potential to two- and/or three-body contributions. The scheme, called the Deep Coarse-Grained Potential (abbreviated DeePCG), exploits a carefully crafted neural network to construct a many-body coarse-grained potential. The network is trained with full atomistic data in a way that preserves the natural symmetries of the system. The resulting model is very accurate and can be used to sample the configurations of the coarse-grained variables in a much faster way than with the original atomistic model. As an application, we consider liquid water and use the oxygen coordinates as the coarse-grained variables, starting from a full atomistic simulation of this system at the ab initio molecular dynamics level. We find that the two-body, three-body, and higher-order oxygen correlation functions produced by the coarse-grained and full atomistic models agree very well with each other, illustrating the effectiveness of the DeePCG model on a rather challenging task.