Flavin Nitroalkane Oxidase Mimics Compatibility with NOx/TEMPO Catalysis: Aerobic Oxidization of Alcohols, Diols, and Ethers

Activation of Molecular Oxygen and Selective Oxidation with Metal Complexes

ConspectusSelective oxidation with molecular oxygen is one of the most appealing approaches to functionalization of organic molecules and, yet at the same time, one of the most challenging reactions facing organic synthesis due to poor selectivity control. Molecular oxygen is a green and inexpensive oxidant, producing water as the only byproduct in oxidation. Not surprisingly, it has been used in the manufacturing of many commodity chemicals in the industry. It is also nature's choice of oxidant and drives a variety of oxidation reactions critical to life and various other biologic processes. While the past decades have witnessed great progress in understanding, both structurally and mechanistically, how nature exploits metalloenzymes, i.e., monooxygenases and dioxygenases, to tackle some of the most challenging oxidation reactions, e.g., methane oxidation to methanol, there are only a small number of well-defined, man-made metal complexes that have been reported to enable selective oxidation with molecular oxygen of compounds more relevant to fine chemical and pharmaceutical synthesis.In the past 10 years or so, our laboratories have developed several transition metal complexes and shown that they are capable of catalyzing selective oxidation under 1 atm of O2. Thus, we have shown that an Fe(II)-bisimidazolidinyl-pyridine complex catalyzes selective oxygenation of C-H bonds in ethers with concomitant release of hydrogen gas instead of water, and when the iron center is replaced with Fe(III), selective oxidative cleavage of C═C bonds of olefins becomes feasible. To address the low activity of the iron complex in oxidizing less active olefins, we have developed a Mn(II)-bipyridine complex, which catalyzes oxidative cleavage of C═C bonds in aliphatic olefins, C-C bonds in diols, and carboxyl units in carboxylic acids under visible light irradiation. Light is necessary in the oxidation to cleave an off-cycle, inactive manganese dimer into a catalytically active Mn═O oxo species. Furthermore, we have found that a binuclear salicylate-bridged Cu(II) complex enables the C-H oxidation of tetrahydroisoquinolines as well as C═C bond cleavage, and when a catalytic vitamin B1 analogue is brought in, oxygenation of tetrahydroisoquinolines to lactams takes place via carbene catalysis. Still further, we have found that a readily accessible binuclear Rh(II)-terpyridine complex catalyzes the oxidation of alcohols, and being water-soluble, the catalyst can be easily separated and reused multiple times. In addition, we recently unearthed a simple protocol that allows waste polystyrene to be depolymerized to isolable, valuable chemicals. A cheap Brønsted acid acts as the catalyst, activating molecular oxygen to a singlet state through complexation with the polymer under light irradiation, thereby depolymerizing the polymer.

Lewis base promoted [4 + 2] annulation of o-acylamino-aryl MBH carbonates with isatin

The first example of Lewis base promoted [4 + 2] annulation between o-acylamino-aryl MBH carbonates and isatin has been developed. This methodology exhibits excellent substrate applicability and has synthesized 1,4-dihydrospiro benzo[d][1,3]oxazine-oxindoles with yields up to 98%. The practical value of this method is underscored by its successful application in a 50-fold scale-up.

Aerobic Oxidation of PMB Ethers to Carboxylic Acids

The first aerobic protocol of direct transformation of p-methoxybenzyl (PMB) ethers to carboxylic acids efficiently with Fe(NO3)3 ⋅ 9H2O and TEMPO as catalysts at room temperature has been developed. The reaction accommodates C-Br bond, terminal/non-terminal C-C triple bond, amide, cyano, nitro, ester, and trifluoromethyl groups. Even highly selective oxidative deprotection of different benzylic PMB ethers has been realized. The reaction has been successfully applied to the total synthesis of natural product, (R)-6-hydroxy-7,9-octadecadiynoic acid, demonstrating the practicality of the method. Based on experimental studies, a possible mechanism involving oxygen-stabilized benzylic cation has been proposed.

Exploring the Reactivity of Flavins with Nucleophiles Using a Theoretical and Experimental Approach

Covalent adducts of flavin cofactors with nucleophiles play an important role in non-canonical function of flavoenzymes as well as in flavin-based catalysis. Herein, the interaction of flavin derivatives including substituted flavins (isoalloxazines), 1,10-ethylene-bridged flavinium salts, and non-substituted alloxazine and deazaflavin with selected nucleophiles was investigated using an experimental and computational approach. Triphenylphosphine or trimethylphosphine, 1-nitroethan-1-ide, and methoxide were selected as representatives of neutral soft, anionic soft, and hard nucleophiles, respectively. The interactions were investigated using UV/Vis and 1H NMR spectroscopy as well as by DFT calculations. The position of nucleophilic attack estimated using the calculated Gibbs free energy values was found to correspond with the experimental data, favouring the addition of phosphine and 1-nitroethan-1-ide into position N(5) and methoxide into position C(10a) of 1,10-ethylene-bridged flavinium salts. The calculated Gibbs free energy values were found to correlate with the experimental redox potentials of the flavin derivatives tested. These findings can be utilized as valuable tools for the design of artificial flavin-based catalytic systems or investigating the mechanism of flavoenzymes.

Oxidative Deprotection of Benzyl Protecting Groups for Alcohols by an Electronically Tuned Nitroxyl-Radical Catalyst

The oxidative deprotection of benzyl (Bn) groups using nitroxyl-radical catalyst 1 and co-oxidant phenyl iodonium bis(trifluoroacetate) (PIFA) is reported. This catalyst is highly active for the oxidation of benzylic ethers because of the electronic tuning on account of the electron-withdrawing ester groups next to the catalytically active center. This catalytic system promotes deprotections at ambient temperature and has a broad substrate scope, including substrates possessing hydrogenation-sensitive functional groups, while the deprotection hardly proceeds when using well-known nitroxyl-radical catalysts such as 2,2,6,6-tetramethylpiperidine N-oxyl (TEMPO). The 1/PIFA system also promotes the deprotection of several benzylic protecting groups, including 2-naphthylmethyl (NAP) and 4-methylbenzyl (MBn) groups. Catalyst 1 was also effective for the direct synthesis of ketones and aldehydes from Bn ethers via deprotected alcohols using an excess of the co-oxidant PIFA.

Atom-Economical Syntheses of Dihydropyrroles Using Flavin-Iodine-Catalyzed Aerobic Multistep and Multicomponent Reactions

Herein, we report facile, atom-economical syntheses of multisubstituted 2,3-dihydropyrroles using flavin-iodine-catalyzed aerobic oxidative multistep transformations of chalcones with β-enamine ketones or 1,3-dicarbonyl compounds and amines. Exploiting coupled flavin-iodine catalysis, the multistep reaction, including C-C and C-N bond formation, is promoted only by the consumption of O₂ (1 atm), thus allowing aerobic oxidative synthesis that generates green H₂O as the only waste.

Catalytic artificial nitroalkane oxidases - a way towards organocatalytic umpolung

Nitroalkane oxidases (NAOs) are flavoenzymes that catalyse the oxidation of nitroalkanes to their corresponding carbonyl compounds while producing nitrite anions. Herein, we present an artificial catalytic system using flavins or ethylene-bridged flavinium salts that works via an NAO-like process. Under conditions optimised in terms of solvent, base, temperature and oxygen pressure, primary nitroalkanes were transformed to aldehydes. In our system, aldehydes immediately reacted with other nitroalkane molecules to form β-nitroalcohols. The reduced flavin catalyst was re-oxidised by oxygen. An alternative mechanism towards β-nitroalcohols via 5-(2-nitrobutyl)-1,5-dihydroflavin was suggested through quantum chemical calculations and by trapping and characterising this dihydroflavin intermediate. Interestingly, 5-(2-nitrobutyl)-1,5-dihydroflavin is an analogue of the flavin adenine dinucleotide adduct previously observed in an NAO X-ray structure. In both mechanistic pathways, flavin-5-iminium species is formed by nitroalkanide addition to flavin. This process represents flavin-based umpolung of an original donor to an acceptor.

Electrochemical α-C(sp3)-H/O-H cross-coupling of isochromans and alcohols assisted by benzoic acid

Isochroman moieties are present in a wide variety of biologically active molecules, but converting isochromans to α-substituted derivatives under mild conditions is challenging. Herein, we report a mild, convenient protocol for synthesis of α-alkoxy isochroman derivatives by means of electrochemical α-C(sp³)-H/O-H cross-coupling reactions of isochromans and alcohols in the presence of benzoic acid, which facilitated the electro-oxidation process and increased the product yield. Various alcohols and isochromans, as well as other structurally similar substrates, gave moderate to high yields of the desired coupling products, and the reaction could be carried out on a gram scale.

Tuning Deazaflavins Towards Highly Potent Reducing Photocatalysts Guided by Mechanistic Understanding - Enhancement of the Key Step by the Internal Heavy Atom Effect

Deazaflavins are well suited for reductive chemistry acting via a consecutive photo-induced electron transfer, in which their triplet state and semiquinone - the latter is formed from the former after electron transfer from a sacrificial electron donor - are key intermediates. Guided by mechanistic investigations aiming to increase intersystem crossing by the internal heavy atom effect and optimising the concentration conditions to avoid unproductive excited singlet reactions, we synthesised 5-aryldeazaflavins with Br or Cl substituents on different structural positions via a three-component reaction. Bromination of the deazaisoalloxazine core leads to almost 100 % triplet yield but causes photo-instability and enhances unproductive side reactions. Bromine on the 5-phenyl group in ortho position does not affect the photostability, increases the triplet yield, and allows its efficient usage in the photocatalytic dehalogenation of bromo- and chloroarenes with electron-donating methoxy and alkyl groups even under aerobic conditions. Reductive powers comparable to lithium are achieved.

Transition-metal-free approaches to 2,3-diarylated indenones from 2-alkynylbenzaldehydes and phenols with tunable selectivity

The first transition-metal-free regioselective synthesis of 2,3-diarylindenones via tandem annulation of 2-alkynylbenzaldehydes with phenols is described. Two different modes of reaction controlled by electronic effects and temperature furnished either "non-rearranged" or "rearranged" indenones in high selectivity.

Selective Aerobic Oxidation of Csp3-H Bonds Catalyzed by Yeast-Derived Nitrogen, Phosphorus, and Oxygen Codoped Carbon Materials

Nitrogen, phosphorus, and oxygen codoped carbon catalysts were successfully synthesized using dried yeast powder as a pyrolysis precursor. The yeast-derived heteroatom-doped carbon (yeast@C) catalysts exhibited outstanding performance in the oxidation of C_sp³-H bonds to ketones and esters, giving excellent product yields (of up to 98% yield) without organic solvents at low O₂ pressure (0.1 MPa). The catalytic oxidation protocol exhibited a broad range of substrates (38 examples) with good functional group tolerance, excellent regioselectivity, and synthetic utility. The yeast-derived heteroatom-doped carbon catalysts showed good reusability and stability after recycling six times without any significant loss of activity. Experimental results and DFT calculations proved the important role of N-oxide (N⁺-O^-) on the surface of yeast@C and a reasonable carbon radical mechanism.

Aerobic Oxidations via Organocatalysis: A Mechanistic Perspective

This review focuses on recent advances and mechanistic views of aerobic C(sp3)–H oxidations catalyzed by organocatalysts, where metal catalysis and photocatalysis are not included.

1 Introduction

2 Carbanion Route: TBD-Catalyzed C(sp3)–H Oxygenation

2.1 α-Hydroxylation of Ketones

2.2 Carbonylation of Benzyl C(sp3)–H

3 Radical Route: NHPI-Catalyzed C(sp3)–H Oxidation

3.1 N-Oxyl Radicals and Mechanisms

3.2 Oxygenation of Benzyl C(sp3)–H

3.3 Solvent Effects

4 Hydride-Transfer Route: TEMPO-Catalyzed Oxidations

4.1 Oxoammonium Cation and Mechanisms

4.2 Dehydrogenation of Alcohols

4.3 Oxygenation of Benzyl C(sp3)–H

5 Conclusions and Outlook

Remote carbamate-directed site-selective benzylic C–H oxygenation via synergistic copper/TEMPO catalysis at room temperature

A benzylic C(sp3)–H oxygenation with water at room temperature through a ligand- and additive-free synergistic copper/TEMPO-catalysed radical relay pathway and a remote directing strategy is described.

[Oxidative Deprotection of p-Methoxybenzyl Ethers by a Nitroxyl Radical Catalyst]

The oxidation of p-methoxybenzyl (PMB) ethers was achieved using a nitroxyl radical catalyst 1, which contains electron-withdrawing ester groups adjacent to the nitroxyl group. The oxidative deprotection of the PMB moieties on the hydroxy groups was observed upon treatment of 1 with one equivalent of the co-oxidant phenyl iodonium bis(trifluoroacetate) (PIFA). This system showed an excellent chemoselectivity profile for the deprotection of PMB ethers from a broad range of functional groups including diverse oxidation-sensitive moieties. The corresponding carbonyl compounds were obtained by treating the PMB-protected alcohols with 1 and an excess amount of PIFA.

Molecular Editing of Flavins for Catalysis

The diverse activity of flavoenzymes in organic transformations has fascinated researchers for a long time. However, when applied outside an enzyme environment, the isolated flavin cofactor only shows largely reduced activity. This highlights the importance of embedding the reactive isoalloxazine core of flavins in defined surroundings. The latter include crucial non-covalent interactions with amino acid side chains or backbone as well as controlled access to reactants such as molecular oxygen. Nevertheless, molecular flavins are increasingly applied in the organic laboratory as valuable organocatalysts. Chemical modification of the parent isoalloxazine structure is of particular interest in this context in order to achieve reactivity and selectivity in transformations, which are so far only known with flavoenzymes or even unprecedented. This review aims to give a systematic overview of the reported designed flavin catalysts and highlights the impact of each structural alteration. It is intended to serve as a source of information when comparing the performance of known catalysts, but also when designing new flavins. Over the last few decades, molecular flavin catalysis has emerged from proof-of-concept reactions to increasingly sophisticated transformations. This stimulates anticipating new flavin catalyst designs for solving contemporary challenges in organic synthesis.

1 Introduction

2 N1-Modification

3 N3-Modification

4 N5-Modification

5 C6–C9-Modification

6 N10-Modification

7 Conclusion

TEMPO-Functionalized Nanoreactors from Bottlebrush Copolymers for the Selective Oxidation of Alcohols in Water

Polymeric nanoreactors in water fabricated by the self-assembly of amphiphilic copolymers have attracted much attention due to their good catalytic performance without using organic solvents. However, the disassembly and instability of relevant nanostructures often compromise their potential applicability. Herein, the preparation of 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO)-containing nanoreactors by the self-assembly of amphiphilic bottlebrush copolymers has been demonstrated. First, a macromonomer having a norbornenyl polymerizable group was prepared by RAFT polymerization of hydrophobic and hydrophilic monomers. The macromonomer was further subjected to ring-opening metathesis polymerization to produce an amphiphilic bottlebrush copolymer. Further, TEMPO, as a catalyst, was introduced into the hydrophobic block through the activated ester strategy. Finally, TEMPO-functionalized polymeric nanoreactors were successfully obtained by self-assembly in water. The nanoreactors exhibited excellent catalytic activities in selective oxidation of alcohols in water. More importantly, the reaction kinetics showed that the turnover frequency is greatly increased compared to that of the similar nanoreactor prepared from liner copolymers under the same conditions. The outstanding catalytic activities of the nanoreactors from bottlebrush copolymers could be attributed to the more stable micellar structure using the substrate concentration effect. This work presents a new strategy to fabricate stable nanoreactors, paving the way for highly efficient organic reactions in aqueous solutions.