Heck Reactions Catalyzed by Ultrasmall and Uniform Pd Nanoparticles Supported on Polyaniline

Palladium/N-Heterocyclic Carbene-Decorated Covalent Organic Framework for Suzuki-Miyaura and Mizoroki-Heck Cross-Coupling

Recently, significant breakthroughs have been achieved in covalent organic frameworks (COF) as well-defined porous materials for palladium catalysis. However, the development of modular frameworks decorated with readily available and strongly σ-donating N-heterocyclic ligands is unexplored. In this study, we report a novel modular Pd-NHC/COF framework, where the active palladium species is incorporated into a covalent organic framework (COF) through readily accessible benzimidazolium. The Pd-NHC/COF system promotes the Suzuki-Miyaura and Mizoroki-Heck C-C cross-coupling as a highly active reusable catalyst. Excellent catalytic efficiency and high Z/E selectivity have been achieved for the construction of biaryls and stilbenes using this Pd-NHC/COF catalytic system.

Palladium nanoparticles from β-cyclodextrin and cellulose methyl carboxylate as an effective catalyst for Sonogashira coupling and the reduction of alkynes

This research presents an effective approach for synthesizing palladium nanoparticle (PdNP) catalysts, employing β-cyclodextrin (β-CD) as a reducing agent and cellulose methyl carboxylate (CMC) as a stabilizer. PdNP-based nanocomposites were prepared by varying the mass ratios of CMC to β-CD from 1 : 1 to 3 : 2. Their structural and physicochemical properties were thoroughly analyzed using multiple characterization techniques, including ultraviolet-visible spectroscopy (UV-vis), FTIR, DLS, Zeta potential, XRD, TGA, and TEM. The resulting PdNPs exhibited a crystalline structure with particle dimensions spanning from 2 to 10 nm, with the majority falling between 4 and 6 nm. These nanoparticles demonstrated outstanding catalytic activity in Sonogashira coupling reactions, operating without additional catalysts and efficiently converting alkynes into (Z)-alkenes utilizing KOH/DMF as a hydrogen donor. The high yield and selectivity observed highlight the potential of CMC/β-CD-stabilized PdNPs as promising catalysts for organic synthesis applications.

Immobilization of palladium(II) acetate on a polymer-anchored Schiff base as a new heterogeneous catalyst for three-component one-Pot Mizoroki-Heck coupling via an in situ witting reaction

In this work, 4-((4-methylbenzyl)oxy)benzaldehyde resin-supported Pd(II)-Schiff base PS@Pd(OAc)2 was synthesized. FT-IR, XPS, TGA, ICP-MS, and powder XRD established the structure of PS@Pd(OAc)2. The morphology and distribution of elements on PS@Pd(OAc)2 were determined using SEM, TEM, and elemental mapping analysis. The heterogenized PS@Pd(OAc)2 catalyst was found to be efficient in promoting three-component Mizoroki-Heck coupling via an in situ Witting reaction, where (E)-1,2-diphenylethenes were efficiently synthesized from the Witting salt. In this one-pot reaction, this catalyst exhibits a distinct synergistic effect. The significant mass-transfer limitation results from a nonsignificant distribution of active sites amalgamated with the crumpling of catalysts, which facilitates the smooth, easy movement of the reactants and products toward the well-spaced active catalytic sites on the catalyst's surface. These characteristics increase the catalytic activity of PS@Pd(OAc)2. Moreover, the catalyst was found to be quite robust for this reaction with very little metal leaching; thus, it can be efficiently recycled. Hence, multiple uses were established, and its reusability was proven in this important reaction.

A Review on Polyaniline-Supported Catalyst for Organic Transformations

Organic transformations are very important in synthetic organic chemistry and are used immensely in pharmaceuticals. Polyaniline is a marvelous and exceptional conducting polymer because of its extensive and valuable applications. Various modified polyaniline derivatives were developed by researchers and explored as solid heterogeneous catalysts for synthesizing important organic compounds through different organic transformations. Polyaniline-supported catalysts have many advantages: easy synthesis, environmental stability, environmental friendliness, high yield, short reaction times, the requirement for green solvent or solventless medium, and excellent reusability. In past years, polyaniline-supported catalysts have been widely used in various important organic syntheses under solvent-free or green reaction conditions. Hence, here is a comprehensive, detailed review of the application of polyaniline catalysts in organic transformations with all of their advantages and future scope.

Development and synthesis of a novel salen-type ligand based on phenylalanine for Mizoroki-Heck, and S-arylation cross-coupling reactions

In this article, we introduced a novel salen-type ligand precursor and applied it in the Pd-catalyzed Mizoroki-Heck and Cu-catalyzed S-arylation cross-coupling reactions. For the preparation of this structure, (DL)-phenyl alanine was employed as a starting material. These ligand precursor and related catalytic system can be readily synthesised. Various aryl halides (-I, -Br) and alkenes were applied successfully in this protocol to give the corresponding Mizoroki-Heck cross-coupling and S-arylated products in high to excellent yields.

Polyaniline-Supported Tungsten-Catalyzed α-H Alkylation Reaction of Ketone with Alcohol

α-H alkylation of carbonyls is a significant reaction in the pharmaceutical industry because it can directly form a C-C bond in an environmentally benign manner. Thus, developing a novel catalyst for this reaction is a hot and practical topic in catalysis, organic synthesis, and materials science. In this paper, we found that polyaniline-supported tungsten could catalyze the α-H alkylation reaction of ketone with alcohol generating water as the only byproduct. Polyaniline support is the key for promoting the catalytic activity of tungsten, which is relatively cheaper than the traditionally employed noble metals. The reaction occurred under mild conditions with a wide substrate scope. The substrate initial concentration was enhanced to 1 mol/L, while the reaction speed was accelerated to reduce the reaction time to only 6 h; these improvements could significantly enhance the production capacity. The advantages make this reaction practical for synthesis with industrial purposes.

The Mizoroki-Heck reaction between in situ generated alkenes and aryl halides: cross-coupling route to substituted olefins

This review covers palladium-catalyzed typical Mizoroki-Heck cross-coupling reactions of aryl halides with in situ generated alkenes, by following a typical Heck coupling mechanism to form substituted olefins unlike direct cross-coupling of alkenes with aryl halides in Heck olefination. These reactions solve the issue of alkenes undergoing polymerization at high temperatures and increase reaction efficiency by reducing the reaction time and purification steps.

H2O as the Hydrogen Donor: Stereo-Selective Synthesis of E- and Z-Alkenes by Palladium-Catalyzed Semihydrogenation of Alkynes

It is very desirable to develop a facile controllable method for selective semihydrogenation of alkynes to alkenes with a cheap and safe hydrogen donor but remains a big challenge. H₂O is one of the best choices of the transfer hydrogenation agent of the world, and the development of methods for synthesizing E- and Z-alkenes using H₂O as the hydrogen source is worthwhile. In this article, a palladium-catalyzed synthesis of E- and Z-alkenes from alkynes using H₂O as the hydrogenation agent was reported. The use of di-tert-butylphosphinous chloride (t-Bu₂PCl) and triethanolamine/sodium acetate (TEOA/NaOAc) was essential for the stereo-selective semihydrogenation of alkynes. The general applicability of this procedure was highlighted by the synthesis of more than 48 alkenes, with good yields and high stereoselectivities.

Continuous-flow Heck coupling reactions catalyzed by Pd complexes of amidoxime fibers

Improving production efficiency and developing green catalytic systems are key issues for applying Heck coupling reactions in the chemical industry. In this study, an amidoxime-fiber-supported Pd catalyst is prepared from polyacrylonitrile fiber, hydroxylamine hydrochloride, and PdCl2. The morphology and structure of amidoxime-fiber-supported Pd are characterized by scanning electron microscopy, energy-dispersive spectroscopy, X-ray photoelectron spectrometer, X-ray diffraction, and inductively coupled plasma-optical emission spectrometer. A packed-bed flow reactor is designed and employed for catalysis of the Heck reaction of iodobenzene and styrene based on the amidoxime-fiber-supported Pd catalyst. The effects of reaction temperature, flow rate, cycle time, and reactant concentration on the conversion and yield are investigated. The results show that the optimal conditions for the continuous-flow single reactor are 70 °C, iodobenzene concentration of 30 mmol L−1 in a solution of N,N-dimethylformamide (100 mL) under continuous flow at a flow rate of 2 mL min−1. The catalyst showed good activity and stability after a continuous operation time of 50 h, with catalytic activity 2.21 times higher than that obtained with traditional batch reaction. Furthermore, we have established a new flow reaction system based on the numbering-up of reactors with a parallel connection. The catalytic efficiency of four parallel reactors is four times higher than that of a single reactor. Kinetic studies reveal that the reaction has low activation energy (8.8771 kJ mol−1), indicating that amidoxime-fiber-supported Pd has good catalytic activity. This research provides an alternative pathway for highly efficient Heck coupling in continuous flow.

A palladium polyaniline complex: a simple and efficient catalyst for batch and flow Suzuki-Miyaura cross-couplings

A novel palladium polyaniline complex (Pd@PANI) was synthesized via a one-pot method using a low concentration of hydrogen peroxide (3 wt%) as a mild oxidant. Pd@PANI was employed to catalyze Suzuki-Miyaura cross-couplings with 0.11 ppm levels of palladium and high turnover numbers (up to 6.1 × 10⁴). Various aromatic halides and aromatic boric acids were used as reaction partners to prepare the biaryl compounds in high yields. Application of the method in the synthesis of D-fructose derivatives was also performed. Furthermore, the catalyst was evaluated under a flow process to provide the corresponding products in good yields with shorter residence times and lower temperatures in more convenient operations compared with the batch conditions.

Pd-Catalyzed Cross-Couplings: On the Importance of the Catalyst Quantity Descriptors, mol % and ppm

This Review examines parts per million (ppm) palladium concentrations in catalytic cross-coupling reactions and their relationship with mole percentage (mol %). Most studies in catalytic cross-coupling chemistry have historically focused on the concentration ratio between (pre)catalyst and the limiting reagent (substrate), expressed as mol %. Several recent papers have outlined the use of “ppm level” palladium as an alternative means of describing catalytic cross-coupling reaction systems. This led us to delve deeper into the literature to assess whether “ppm level” palladium is a practically useful descriptor of catalyst quantities in palladium-catalyzed cross-coupling reactions. Indeed, we conjectured that many reactions could, unknowingly, have employed low “ppm levels” of palladium (pre)catalyst, and generally, what would the spread of ppm palladium look like across a selection of studies reported across the vast array of the cross-coupling chemistry literature. In a few selected examples, we have examined other metal catalyst systems for comparison with palladium.

Palladium clusters, free and supported on surfaces, and their applications in hydrogen storage

Palladium is a late transition metal element in the 4d row of the periodic table. Palladium nanoparticles show efficient catalytic activity and selectivity in a number of chemical reactions. In this paper, we review the structural and electronic properties of palladium nanoclusters, both isolated and deposited on the surface of different substrates. Careful experiments and extensive calculations have been performed for small Pd clusters which provide ample information on their properties. Work on large Pd clusters is less abundant and more difficult to perform and interpret. Cluster deposition is a method to modify material surfaces for different applications, and we report the known results for the deposition of Pd clusters on the surfaces of a number of interesting substrates: carbonaceous substrates like graphene and some layered novel materials related to graphene, metal oxide substrates, silicon and silicon-related substrates and metallic alloy substrates. Emphasis is placed on revealing how the structural, electronic and magnetic properties change when the clusters are deposited on the substrate surfaces. Some examples of chemical reactions catalyzed by supported Pd clusters and nanoparticles are reported. An issue discussed in detail is the influence of Pd on the storage of hydrogen in porous materials. Experimental work shows that the amount of stored hydrogen increases when the absorbing material is doped with Pd atoms, clusters and nanoparticles, and a spillover mechanism from the metal particle to the substrate is usually accepted as the explanation. To shed light on this issue, a critical analysis based on density functional simulations of the mechanisms of hydrogen spillover in perfect and defective graphene doped with palladium clusters is presented.

Palladium-Catalyzed Semihydrogenation of Alkynes with EtOH: Highly Stereoselective Synthesis of E- and Z-Alkenes

A palladium-catalyzed semihydrogenation of alkynes to E- and Z-alkenes employing EtOH as the hydrogenating agent is reported. The selectivity of the reaction system was effectively controlled by ­ligand/additive and solvent regulation. The use of sodium acetate/­triethanolamine (NaOAc/TEOA), THF, and (1R,2R)-bis[(2-­methoxyphenyl)phenylphosphino]ethane [(R,R)-DIPAMP] in CH3CN was critical for the stereoselective semihydrogenation of alkynes. The general applicability of this procedure was highlighted by the synthesis of more than 36 alkenes, in good yields with high stereoselectivities.

Highly selective Suzuki reaction catalysed by a molecular Pd–P-MOF catalyst under mild conditions: role of ligands and palladium speciation

A phosphine-functionalized MOF was used to prepare molecularly-defined palladium catalysts, active for Suzuki coupling in mild conditions. Their selectivity was correlated with the nature of the catalytic active site via XAS and NMR.

Progresses in synthetic technology development for the production of L-lactide

L-Lactide is an intermediate for the industrial production of polylactic acid (PLA). The chemical and optical purities of lactide determine the quality of the prepared PLA. It is of great challenge to synthesize L-lactide efficiently with high chemical and optical purities under the conditions applicable for industrial production. With the national plastic reduction order issued, developing biodegradable materials such as PLA has gradually become a hot topic, and the production of upstream lactide is the key technique for the whole industrial chain. This mini-review aims to summarize typical works on the related synthetic technology development in recent years.

Pd Nanoparticles Stabilized on the Cross-Linked Melamine-Based SBA-15 as a Catalyst for the Mizoroki–Heck Reaction

Mesoporous SBA-15 silicate with a high surface area was prepared by a hydrothermal method, successively modified by organic melamine ligands and then used for deposition of Pd nanoparticles onto it. The synthesized materials were characterized with infrared spectroscopy (FT-IR), thermogravimetric analysis (TGA), nitrogen physisorption, scanning electron microscopy (SEM) coupled with energy dispersive X-ray analysis (EDX), transmission electron microscopy (TEM), nuclear magnetic resonance (NMR) and inductively coupled plasma (ICP-OES). The catalyst was effectively used in the Mizoroki–Heck coupling reaction of various reactants in the presence of an organic base giving the desired products in a short reaction time and with small catalysts loadings. The reaction parameters such as the base type, amounts of catalyst, solvents, and the temperature were optimized. The catalyst was easily recovered and reused at least seven times without significant activity losses.

Graphic Abstract

Palladium Nanoparticles Anchored on Magnesium Organosilicate: An Effective and Selective Catalyst for the Heck Reaction

A new and effective palladium catalyst supported on a magnesium organosilicate for application in the Heck reaction is presented. A group of compounds comprising 22 examples were synthesized in moderate to high yields (up to 99%) within a short time. The palladium supported on magnesium organosilicate catalyst was characterized as an amorphous solid by SEM, containing around 33% of palladium inside the solid, and even with this low quantity of palladium, the catalyst was very efficient in the Heck reaction. Besides, based on the Scherrer equation, the crystallite size of the synthesized palladium nanoparticles was ultrasmall (around 1.3 nm). This strategy is a simple and efficient route for the formation of C–C bonds via the Heck cross-coupling reaction.

Palladium nanoparticles in situ synthesized on Cyclea barbata pectin as a heterogeneous catalyst for Heck coupling in water, the reduction of nitrophenols and alkynes

This study develops an effective method for in situ synthesis of PdNPs using Cyclea barbata pectin as green reducing and stabilizing reagent. The catalytic activity of nanocomposite was evaluated for Heck coupling reaction, reduction of nitrophenols and reduction of alkynes.

Deposition of Palladium Nanoparticles by the Coating of the Carbonaceous Layer from Wastepaper-Derived Bio-Oil

A highly active and recyclable Pd-deposited catalyst has been successfully prepared for the Heck reaction. Bio-oil liquid, a byproduct from the microwave pyrolysis of wastepaper, is employed to immobilize palladium nanoparticles on a solid support. FTIR, GC, and NMR results indicate the self-polymerization feature of bio-oil, thus giving rise to a uniform carbonaceous layer coated around the surface of the catalyst. Characteristic analysis of the catalyst indicates that palladium nanoparticles are well-dispersed on the parent SBA-15 solid substrate, which is attributed to the carbonaceous layer that is derived from bio-oil carbonization, allowing a high catalytic performance as a heterogeneous catalyst for the Heck reaction. The as-synthesized catalyst demonstrates remarkable recyclability with firm deposition of palladium nanoparticles on the solid support and could be reused without a dramatic decrease in catalytic activity.

New insights into catalysis for Heck reactions with fine supported Pd particles

The catalytic activity over supported Pd particles is dependent on the concentration of soluble active Pd species. The correlation that the smaller the size of supported Pd particles, the higher the catalytic activity is confirmed.

Synthesis of 3-trifluoromethylated 1,3-butadienes via a Pd(0)-catalyzed fluorinated Heck reaction

1,3-Butadienes play a key role in modern synthetic chemistry and biochemistry because they are well-known precursors for the synthesis of retinoids.