Selective Removal of Aminoquinoline Auxiliary by IBX Oxidation

Synthesis of β,β-Dinaphthyl Amino Acids: Towards Molecular Gearing in Peptides and Mini-Proteins

We report the synthesis of β,β-dinaphthyl amino acids by directed CH-activation and their subsequent utilization in peptides. The synthesis of aromatic β-branched amino acids is limited by sterical crowding for large aromatic ring systems. The amino acids are transformed into adequately protected building blocks for solid-phase peptide synthesis by using our amide weakening strategy. Our aim was to study the interactions of the side chain aryl groups in solution and solid state. Based on quantitative analysis of 1H NMR reference nuclei, we investigate conformational equilibria and compare them to established gearing systems.

C-N cleavage of secondary amide to access primary amide by a Co(II)/Oxone oxidation system

Cleavage of the C-N bond of a secondary amide could provide alternative access to primary amides; however, this strategy remains challenging due to oxidation resistance of the amide. Herein, we employed the cobalt(II)/Oxone catalytic system, one of the advanced oxidation processes (AOPs), to make it available to break the strong C-N bond of various secondary (sulfon)amides, especially those bearing electron-poor or ortho-substituted N-arenes, en route to desirable primary (sulfon)amides. Control experiments showed that it was probably not the generally-considered persulfate anion radical in the cobalt/peroxymonosulfate (Co/PMS) system but the proposed high-valent cobalt-oxo intermediate that should be the major active species for the initial N-H oxidation of N-aryl amides. In the case of N-alkylated secondary amides, the α-C-H bond, rather than the N-H bond, should be oxidized first by both the reactive radicals and high-valent cobalt-oxo species. This work not only establishes an efficient method for removing the N-substituents of secondary amides at low cost, with readily available and eco-friendly reagents, but also demonstrates further synthetic application and provides more insight into intermediates for metal-based AOPs in environmental remediation.

Iodoxybenzoic Acid (IBX) in Organic Synthesis: A Septennial Review

This study reviews the oxidative applications of 2-iodoxybenzoic acid (IBX) in organic synthesis, focusing on C-H functionalization, hetero-hetero bond formations, ring cleavage reactions, dehydrogenation, heterocyclic ring formations, and some miscellaneous reactions in a comprehensive and critical way. It compiles the literature starting from mid-2015 to date.

Synthesis of 13C-methyl-labeled amino acids and their incorporation into proteins in mammalian cells

Isotopic labeling of methyl-substituted proteinogenic amino acids with 13C has transformed applications of solution-based NMR spectroscopy and allowed the study of much larger and more complex proteins than previously possible with 15N labeling. Procedures are well-established for producing methyl-labeled proteins expressed in bacteria, with efficient incorporation of 13C-methyl labeled metabolic precursors to enable the isotopic labeling of Ile, Val, and Leu methyl groups. Recently, similar methodology has been applied to enable 13C-methyl labeling of Ile, Val, and Leu in yeast, extending the approach to proteins that do not readily fold when produced in bacteria. Mammalian or insect cells are nonetheless preferable for production of many human proteins, yet 13C-methyl labeling using similar metabolic precursors is not feasible as these cells lack the requisite biosynthetic machinery. Herein, we report versatile and high-yielding synthetic routes to 13C methyl-labeled amino acids based on palladium-catalyzed C(sp3)-H functionalization. We demonstrate the efficient incorporation of two of the synthesized amino acids, 13C-γ2-Ile and 13C-γ1,γ2-Val, into human receptor extracellular domains with multiple disulfides using suspension-cultured HEK293 cells. Production costs are reasonable, even at moderate expression levels of 2-3 mg purified protein per liter of medium, and the method can be extended to label other methyl groups, such as 13C-δ1-Ile and 13C-δ1,δ2-Leu. In summary, we demonstrate the cost-effective production of methyl-labeled proteins in mammalian cells by incorporation of 13C methyl-labeled amino acids generated de novo by a versatile synthetic route.

Anion Cascade Reactions II: Synthesis of 3-Isoquinuclidone-Based Bridged Polycyclic Lactams

A facile and convenient anion cascade strategy was developed for the synthesis of bridged-ring amides in moderate to excellent yields in one step in the presence of tBuOK in EtOH under mild conditions, starting from various cheap and commercially available 2-cyanoacetamides and precisely designed straight-chain and annular 1,4-dienones. This simple protocol was generally applicable to a wide range of substrates with high chemical conversion and diastereoselectivity.

Anion Cascade Reactions. Part I: Synthesis of 3-Isoquinuclidones from a Nazarov-like Reagent

A simple and atom-economical one-step protocol is described for the synthesis of biologically valuable 3-isoquinuclidones. The method proceeds from the simple starting materials, α-acyl N-arylcinnamamides, and can be performed under mild conditions in the presence of tBuOK. The key steps of this process are the double Michael addition reaction of a Nazarov-like reagent and the subsequent intramolecular hemiamination. These flexible intermolecular reactions could be performed on a gram scale.

Axially chiral styrene-based organocatalysts and their application in asymmetric cascade Michael/cyclization reaction

An axially chiral styrene-based organocatalyst, featuring a combination of axially chiral styrene-based structure and a pyrrole ring, has been designed and synthesized. This catalyst demonstrates remarkable capabilities in producing a wide range of densely substituted spirooxindoles that feature an alkyne-substituted quaternary stereogenic center. These spirooxindoles are generated through mild cascade Michael/cyclization reactions, resulting in high conversion rates and exceptional enantioselectivity. Our catalytic model, based on experiments, X-ray structure analysis and DFT calculations suggests that chiral matched π-π interactions and multiple H-bonds between the organocatalyst and substrates play significant roles in controlling the stereoselectivity of the reaction.

Iodine(V)-Based Oxidants in Oxidation Reactions

The chemistry of hypervalent iodine reagents has now become quite valuable due to the reactivity of these compounds under mild reaction conditions and their resemblance in chemical properties to transition metals. The environmentally friendly nature of these reagents makes them suitable for Green Chemistry. Reagents with a dual nature, such as iodine(III) reagents, are capable electrophiles, while iodine(V) reagents are known for their strong oxidant behavior. Various iodine(V) reagents including IBX and DMP have been used as oxidants in organic synthesis either in stoichiometric or in catalytic amounts. In this review article, we describe various oxidation reactions induced by iodine(V) reagents reported in the past decade.

Selective Hydrolysis of Primary and Secondary Amides Enabled by Visible Light

Amide hydrolysis is a fundamentally important transformation in organic chemistry. Developing hydrolysis procedures under mild conditions with a broad substrate scope is desirable. Herein, by leveraging a photoresponsive auxiliary o-nitroanilide, we established a mild two-step protocol for the hydrolysis of primary and secondary amides. This protocol is driven by visible light irradiation at room temperature under neutral conditions, which tolerates numerous acid- and base-sensitive functional groups. Various drugs, natural product-, and amino acid-derived amides can be selectively hydrolyzed.

Rh(III)-Catalyzed Oxidative Domino C-H/N-H Annulation: Diarylureas as Arylamine Donors for the Assembly of Indolo[2,1-a]isoquinolines

An efficient and convenient Rh(III)-catalyzed double aryl C(sp2)-H bond and N-H activation and annulation reaction is reported for the synthesis of indolo[2,1-a]isoquinolines in the presence of the Cu(OAc)₂ oxidant under heating conditions. Distinct from previous works with other arylamine donors, one molecule of 1,3-diarylurea can serve as a precursor of two molecules of arylamine in the reaction with diaryl-substituted alkynes.

HFIP in Organic Synthesis

1,1,1,3,3,3-Hexafluoroisopropanol (HFIP) is a polar, strongly hydrogen bond-donating solvent that has found numerous uses in organic synthesis due to its ability to stabilize ionic species, transfer protons, and engage in a range of other intermolecular interactions. The use of this solvent has exponentially increased in the past decade and has become a solvent of choice in some areas, such as C-H functionalization chemistry. In this review, following a brief history of HFIP in organic synthesis and an overview of its physical properties, literature examples of organic reactions using HFIP as a solvent or an additive are presented, emphasizing the effect of solvent of each reaction.

4-Aminobenzotriazole (ABTA) as a Removable Directing Group for Palladium-Catalyzed Aerobic Oxidative C-H Olefination

4-Aminobenzotriazole (ABTA) was applied as an effective removable directing group (DG) in Pd-catalyzed C-H activation for the first time. Compared with the widely applied pyridine and quinoline analogs, ABTA showed significantly improved reactivity, achieving aerobic oxidative C-H olefination in excellent yields (up to 95% vs <50% with other reported DGs under identical conditions). Using this new strategy, macrocyclization was achieved to give cyclic peptides in good yields with easy ABTA removal under mild conditions, highlighting the promising potential of this new DG.

Remote arylalkylation of unactivated alkenes via 6- or 7-membered nickelacycles with excellent diastereofidelity

We developed a nickel-catalyzed remote arylalkylation of unactivated alkenes via kinetically and thermodynamically disfavored 6- and 7-membered nickelacycles.

Fe(iii)-catalysed selective C–N bond cleavage of N-phenylamides by an electrochemical method

An Fe(iii)-catalysed transformation of secondary N-phenyl substituted amides to primary amides by an electrochemical method is developed. Regioselective aryl C–H oxygenation occurs during the reaction, promoting selective C(phenyl)-N bond cleavage to form primary amides in yields of up to 92%.

An Fe(iii)-catalysed transformation of secondary N-phenyl substituted amides to primary amides by an electrochemical method is developed.

Electrochemistry-controlled dearomative 2,3-difunctionalization of indoles to synthesize oxoindoline derivatives

A general and practical protocol for electrochemisty-controlled dearomative 2,3-difunctionalization of indoles via electrochemically anode-selective oxidative cross coupling has been demonstrated. The reaction runs under metal, oxidant and catalyst free condition,...

A Mechanism Study for Self-Cleaving Chlorotetrafluoroethylsulfinyl (-SOCF2CF2Cl)-Directed Pd(II)-Catalyzed C-H Activation

A mechanism study for Pd(II)-catalyzed C(sp³)-H activation using a self-cleaving chlorotetrafluoroethylsulfinyl (-SOCF₂CF₂Cl) auxiliary as a directing group is reported. Mechanistic studies reveal that (1) the auxiliary group is crucial for C(sp³)-H activation, (2) the reaction undergoes a C(sp³)-H olefination-Michael addition-removal of the auxiliary sequence, (3) the removal of the auxiliary (SOR_f) is most likely the alcoholic solvolysis of the -SOCF₂CF₂Cl group on the N-tri-substituted sulfonamides, and (4) the C(sp³)-H cleavage is involved in the rate-determining step.

Facile Synthesis of Alkylidene Phthalides by Rhodium-Catalyzed Domino C-H Acylation/Annulation of Benzamides with Aliphatic Carboxylic Acids

The Rh-catalyzed ortho-C(sp² )-H functionalization of 8-aminoquinoline-derived benzamides with aliphatic acyl fluorides generated in situ from the corresponding acids has been developed. This reaction initiated with 8-aminoquinoline-directed ortho-C(sp² )-H acylation, which was accompanied by subsequent intramolecular nucleophilic acyl substitution of amide group to produce alkylidene phthalides This approach exhibits high stereo-selectivity for Z-isomer products, and tolerates a variety of functional groups as well as aliphatic carboxylic acids with diverse structural scaffolds.

Palladium-Catalyzed sp3 C–H Benzoxylation of Alanine Derivatives Using Aldehydes under Ambient Conditions

The Pd(II)-catalyzed sp3 C–H bond benzoxylation of N-phthaloylalanine derivatives possessing an 8-aminoquinolyl group as a directing group with aldehydes under ambient conditions is reported. When a solution of an alanine derivative and an aldehyde in a toluene/water co-solvent was reacted in the presence of palladium catalyst and tert-butyl hydroperoxide at room temperature, a benzoxylated product was formed in up to 68% yield. The protecting group of the obtained benzoxylated product was smoothly removed to afford a free amide in high yield.

Pd-catalysed β-selective C(sp3)-H arylation of simple amides

An efficient Pd-catalysed β-C(sp³)-H arylation of diverse native amides with aryl iodides was developed. This protocol overcomes the necessity of the Thorpe-Ingold effect and features broad substrate scope and good functional group tolerance. The potential application of this protocol is collectively demonstrated by gram-scale synthesis and the synthesis of several bioactive molecules.

Z-Selective Pd-catalyzed 2,2,2-trifluoroethylation of acrylamides at room temperature

A straightforward 2,2,2-trifluoroethylation of acrylamides by Pd-catalyzed C-H bond activation was reported by using a fluorinated hypervalent iodine reagent as a coupling partner. At room temperature, this additive-free approach allowed the synthesis of Z-2,2,2-trifluoroethylated acrylamides (19 examples, up to 73% yield) in a stereoselective manner. Under these mild reaction conditions, the methodology turned out to be functional group tolerant and mechanistic studies gave us a better understanding of the transformation.

A Guide to Directing Group Removal: 8-Aminoquinoline

The use of directing groups allows high levels of selectivity to be achieved in transition metal-catalyzed transformations. Efficient removal of these auxiliaries after successful functionalization, however, can be very challenging. This review provides a critical overview of strategies used for removal of Daugulis' 8-aminoquinoline (2005-2020), one of the most widely used N,N-bidentate directing groups. The limitations of these strategies are discussed and alternative approaches are suggested for challenging substrates. Our aim is to provide a comprehensive end-users' guide for chemists in academia and industry who want to harness the synthetic power of directing groups-and be able to remove them from their final products.

Synthesis of γ-Lactams via Pd(II)-Catalyzed C(sp3)-H Olefination Using a Self-Cleaving Polyfluoroethylsulfinyl Directing Group

A monodentate directing group, 2-chlorotetrafluoroethylsulfinylmide (-NHSOCF₂CF₂Cl), for inert C(sp³)-H bond activation is reported. This directing group shows efficient ability in Pd(II)-catalyzed C(sp³)-H olefination. The desired olefination products undergo subsequent Michael addition and in situ expulsion of the auxiliary to provide the free NH γ-lactam products. Preliminary mechanistic studies reveal that the auxiliary group is crucial for C(sp³)-H activation.

Ni-Catalyzed Direct Carboxylation of an Unactivated C-H Bond with CO2

The transition-metal-catalyzed direct carboxylation of an unactivated C-H bond is rarely reported, and no example of catalysis using abundant and cheap nickel has been reported. In this work, the first Ni-catalyzed direct carboxylation of an unactivated C-H bond under an atmospheric pressure of CO₂ is reported. This method affords moderate to high carboxylation yields of various methyl carboxylates under mild conditions. Preliminary mechanistic studies reveal that a Ni(0)-Ni(II)-Ni(I) catalytic cycle may be involved in this reaction.

Ligand-free copper-catalyzed regio- and stereoselective 1,1-alkylmonofluoroalkylation of terminal alkynes

A novel copper-catalyzed highly regio- and stereoselective 1,1-alkylmonofluoroalkylation of terminal alkynes without an external ligand has been developed.

Nickel-catalyzed dual C(sp2)–H activation of arenes: a new route to diaryl ethers

Diaryl ethers are synthesized directly from simple arenes for the first time through dual C(sp²)–H activation with the aid of a bidentate auxiliary by nickel catalysis. The auxiliary can be removed smoothly under mild reaction conditions.

Directed C(sp3)-H arylation of tryptophan: transformation of the directing group into an activated amide

The aminoquinoline-directed C–H activation was used to synthezise unnatural tryptophans for solid phase peptide synthesis for the first time.

The 8-aminoquinoline (8AQ) directed C(sp³)–H functionalization was applied in the synthesis of β-arylated tryptophan derivatives. The laborious protecting group reorganization towards α-amino acids compatible for solid phase peptide synthesis (SPPS) was cut short by the transformation of the directing group into an activated amide, which was either used directly in peptide coupling or in the gram scale synthesis of storable Fmoc-protected amino acids for SPPS. In this work, directed C–H activation and nonplanar amide chemistry complement each other for the synthesis of hybrids between phenylalanine and tryptophan with restricted side chain mobility.