Site-Selective Ruthenium-Catalyzed C–H Bond Arylations with Boronic Acids: Exploiting Isoindolinones as a Weak Directing Group

Ruthenium(ii) catalyzed C-3 site selective alkenylation of indole derivatives via C-H activation

An efficient synthetic method has been developed for C-3 site-selective alkenylation of indole derivatives under ruthenium(ii) catalysis with an ester as a directing group. Besides the presence of two potential C(sp2)-H sites available for functionalization in the substrates, exclusive C3 selectivity was achieved in a selective manner as only mono-functionalized products were formed. The high site selectivity is attributed to the formation of an uncommon six-membered metallacycle intermediate between the ruthenium catalyst and ester directing group, enabled by the selective alkenylation at the C3 position of indole derivatives. This protocol features high site selectivity, operational simplicity, broad substrate scope, and moderate to high yields.

Iridium(I)-Catalyzed Isoindolinone-Directed Branched-Selective Aromatic C-H Alkylation with Simple Alkenes

We report an iridium(I)-catalyzed branched-selective C–H alkylation of N-arylisoindolinones with simple alkenes as the alkylating agents. The amide carbonyl group of the isoindolinone motif acts as the directing group to assist the ortho C–H activation of the N-aryl ring. With this atom-economic and highly branched-selective protocol, an array of biologically relevant N-arylisoindolinones were obtained in good yields. Asymmetric control was achieved with up to 87:13 er when a BiPhePhos-like chiral ligand was employed.

Structure-Guided Discovery of the Novel Covalent Allosteric Site and Covalent Inhibitors of Fructose-1,6-Bisphosphate Aldolase to Overcome the Azole Resistance of Candidiasis

Fructose-1,6-bisphosphate aldolase (FBA) represents an attractive new antifungal target. Here, we employed a structure-based optimization strategy to discover a novel covalent binding site (C292 site) and the first-in-class covalent allosteric inhibitors of FBA from Candida albicans (CaFBA). Site-directed mutagenesis, liquid chromatography-mass spectrometry, and the crystallographic structures of APO-CaFBA, CaFBA-G3P, and C157S-2a4 revealed that S268 is an essential pharmacophore for the catalytic activity of CaFBA, and L288 is an allosteric regulation switch for CaFBA. Furthermore, most of the CaFBA covalent inhibitors exhibited good inhibitory activity against azole-resistant C. albicans, and compound 2a11 can inhibit the growth of azole-resistant strains 103 with the MIC₈₀ of 1 μg/mL. Collectively, this work identifies a new covalent allosteric site of CaFBA and discovers the first generation of covalent inhibitors for fungal FBA with potent inhibitory activity against resistant fungi, establishing a structural foundation and providing a promising strategy for the design of potent antifungal drugs.

Metal-Free Cascade Formation of Intermolecular C-N Bonds Accessing Substituted Isoindolinones under Cathodic Reduction

An electrochemical protocol for the construction of substituted isoindolinones via reduction/amidation of 2-carboxybenzaldehydes and amines has been realized. Under metal-free and external-reductant-free electrolytic conditions, the reaction achieves the cascade formation of intermolecular C-N bonds and provides a series of isoindolinones in moderate to good yields. The deuterium-labeling experiment proves that the hydrogen in the methylene of the product is mainly provided by H₂O in the system.

Suzuki–Miyaura Cross-Coupling Reaction with Potassium Aryltrifluoroborate in Pure Water Using Recyclable Nanoparticle Catalyst

This paper describes the Suzuki–Miyaura cross-coupling reaction of aryl bromides with potassium aryltrifluoroborates in water catalyzed by linear polystyrene-stabilized PdO nanoparticles (PS-PdONPs). The reaction of aryl bromides having electron-withdrawing groups or electron-donating groups took place smoothly to give the corresponding coupling product in high yields. The catalyst recycles five times without significant loss of catalytic activity although a little bit increase in size of PdNPs was observed after the reaction.

Aryne Multicomponent Reactions by Directed C-H Activation

Arylation via ortho C-H activation by the aid of directing groups has been explored recently by many researchers. Herein, a palladium-catalyzed C-H arylation using 8-aminoquinoline as a bidentate directing group has been developed. The reaction furnishes only C-H arylation, unlike previous methods where cyclization to corresponding isoquinolones is observed. More interestingly, sequential C-H functionalization was observed when methylacrylate and acrylonitrile was added; this led to C-H olefination with the aryl group, which was installed from the aryne precursor.

Transition-Metal-Catalyzed C–H Arylation Using Organoboron Reagents

Aryl rings are ubiquitous in the core of numerous natural product and industrially important molecules and thus their facile synthesis is of major interest in the scientific community and industry. Although multiple strategies enable access to these skeletons, metal-catalyzed C–H activation is promising due to its remarkable efficiency. Commercially available organoboron reagents, a prominent arylating partner in the cross-coupling domain, have also been utilized for direct arylation. Organoborons are bench-stable, inexpensive, and readily available coupling partners that promise regioselectivity, chemodivergence, cost-efficiency, and atom-economy without requiring harsh and forcing conditions. This critical, short review presents a summary of all major studies of arylation using organoborons in transition-metal catalysis since 2005.

1 Introduction

2 Arylation without Directing Group Assistance

2.1 Palladium Catalysis

2.2 Iron Catalysis

2.3 Gold Catalysis

3 Arylation with Directing Group Assistance

3.1 Palladium Catalysis

3.2 Ruthenium Catalysis

3.3 Rhodium Catalysis

3.4 Nickel Catalysis

3.5 Cobalt Catalysis

3.6 Copper Catalysis

4 Conclusion

Spatial Anion Control on Palladium for Mild C-H Arylation of Arenes

C-H arylation of arenes without the use of directing groups is a challenge, even for simple molecules, such as benzene. We describe spatial anion control as a concept for the design of catalytic sites for C-H bond activation, thereby enabling nondirected C-H arylation of arenes at ambient temperature. The mild conditions enable late-stage structural diversification of biologically relevant small molecules, and site-selectivity complementary to that obtained with other methods of arene functionalization can be achieved. These results reveal the potential of spatial anion control in transition-metal catalysis for the functionalization of C-H bonds under mild conditions.

Steering Site-Selectivity in Transition Metal-Catalyzed C-H Bond Functionalization: the Challenge of Benzanilides

Selective C-H bond functionalization catalyzed by metal complexes have completely revolutionized the way in which chemical synthesis is conceived nowadays. Typically, the reactivity of a transition metal catalyst is the key to control the site-, regio- and/or stereo-selectivity of a C-H bond functionalization. Of particular interests are molecules that contain multiple C-H bonds prone to undergo C-H bond activations with very similar bond dissociation energies at different positions. This is the case of benzanilides, relevant chemical motifs that are found in many useful fine chemicals, in which two C-H sites are present in chemically different aromatic fragments. In the last years, it has been found that depending on the metal catalyst and the reaction conditions, the amide motif might behave as a directing group towards the metal-catalyzed C-H bond activation in the benzamide site or in the anilide site. The impact and the consequences of such subtle control of site-selectivity are herein reviewed with important applications in carbon-carbon and carbon-heteroatom bond forming processes. The mechanisms unraveling these unique transformations are discussed in order to provide a better understanding for future developments in the field of site-selective C-H bond functionalization with transition metal catalysts.

Synthesis of Sulfones via Ru(II)-Catalyzed Sulfination of Boronic Acids

Ruthenium(II) complexes catalyze the insertion of sulfur dioxide into (het)aryl and alkenyl boronic acids. The transmetalation-sulfination process proceeds with DABSO in the presence of 5 mol % RuCl₂(PPh₃)₃ in methanol at 100 °C. The intermediate sulfinate salt can be quenched with various electrophiles such as alkyl halides, epoxides, Michael acceptors, and λ³-iodanes in moderate to good yields. The reported sulfone synthesis can be performed either as a direct one-pot or one-pot two-step procedure depending on the reactivity of the electrophile.

Ru(II)-Catalyzed C-H Hydroxyalkylation and Mitsunobu Cyclization of N-Aryl Phthalazinones

Ruthenium(II)-catalyzed C(sp²)-H functionalization of N-aryl phthalazinones with a range of aldehydes and activated ketone is described. Initial formation of hydroxyalkylated phthalazinones and subsequent Mitsunobu cyclization provided facile access to biologically relevant indazolophthalazinones. The utility of this method is highlighted by synthetic transformations into a series of potentially bioactive scaffolds.