Metal-Free Iodine/TEMPO-Mediated Aerobic Oxidative Ugi-Type Multicomponent Reactions with Tertiary Amines

Engineering Bodipy-Based Metal-Organic Frameworks for Efficient Full-Spectrum Photocatalysis in Amide Synthesis

Developing photocatalysts that can efficiently utilize the full solar spectrum is a crucial step toward transforming sustainable energy solutions. Due to their light absorption limitations, most photo-responsive metal-organic frameworks (MOFs) are constrained to the ultraviolet (UV) and blue light regions. Expanding their absorption to encompass the entire solar spectrum would unlock their full potential, greatly enhancing efficiency and applicability. Here, we report the design and synthesis of a series of highly stable boron-dipyrromethene (bodipy)-based MOFs (BMOFs) by reacting dicarboxyl-functionalized bodipy ligands with Zr-oxo clusters. Leveraging the acidity of the methyl groups on the bodipy backbone, we expanded the conjugation system through a solid-state condensation reaction with various aldehydes, achieving full-color absorption, thereby extending the band edge into the near-infrared (NIR) and infrared (IR) regions. These BMOFs demonstrated exceptional reactivity and recyclability in heterogeneous photocatalytic activities, including C─H bond activation of saturated aza-heterocycles and C─N bond cleavage of N,N-dimethylanilines to produce amides under visible light. Our findings highlight the transformative potential of BMOFs in photocatalysis, marking a significant leap forward in the design of advanced photocatalytic materials with tunable properties.

Metal- and Azide-Free Iodine-Promoted Aerobic Oxidative Cyclization to Trifluoromethylated Triazoles

A novel metal- and azide-free methodology for the synthesis of trifluoromethylated 1,2,3-triazoles from arylamines with a new 3-bromo-1,1,1-trifluoropropan-2-one derived tosylhydrazone has been developed under mild reaction conditions. The new α-bromo-trifluoromethylated tosylhydrazone reagent was operationally safe and bench-stable from low-cost and readily commercially available starting materials in the iodine-promoted aerobic oxidative cycloaddition reaction with arylamines, affording a variety of trifluoromethylated 1,2,3-triazoles in good to excellent yields.

TEMPO-Mediated Direct C(sp2)-H Alkoxylation/Aryloxylation of 1,4-Quinones

A convenient and efficient transition-metal-free method has been developed for the C(sp2)-H alkoxylation/aryloxylation of 1,4-quinones by direct cross-dehydrogenative coupling with readily available alcohols and phenols in the presence of TEMPO under simple and mild conditions. The method allowed the installation of a wide range of alkoxy/aryloxy groups, exhibited high functional group tolerance, showed a broad substrate scope, afforded good to excellent yields of products in a simple one-pot operation, and could be performed on a gram scale. Mechanistic investigation indicated the involvement of the radical pathway.

Using Triazolobenzodiazepine as the Cyclic Imine in Various Types of Joullié-Ugi Reactions

The triazolobenzodiazepine as a cyclic imine was employed in a variety of Joullié-Ugi reactions, and three new families of unique triazolobenzodiazepine connected to carboxamide and tetrazole products were synthesized via a three-component reaction of the cyclic imine and isocyanides with each species of a carboxylic acid/water/TMSN3 under mild conditions in high yields. Furthermore, triazolobenzodiazepine imine was used in an interesting strategy based on the modified Ugi reaction (pseudo-Joullié-Ugi reaction) of cyclic imines with an isocyanide and acetylenedicarboxylates under catalyst-free conditions for the synthesis of triazolobenzodiazepine-fused pyrroles. Mechanistic investigation reveals that triazolobenzodiazepine-fused pyrroles have been generated via a surprising route. Significantly, the use of triazolobenzodiazepine in the Joullié-Ugi, azido-Joullié-Ugi, and pseudo-Joullié-Ugi reactions of a broad scope of biological scaffolds occurred under mild, simple conditions without any catalyst.

Organic Synthesis Using Nitroxides

Nitroxides, also known as nitroxyl radicals, are long-lived or stable radicals with the general structure R1R2N-O•. The spin distribution over the nitroxide N and O atoms contributes to the thermodynamic stability of these radicals. The presence of bulky N-substituents R1 and R2 prevents nitroxide radical dimerization, ensuring their kinetic stability. Despite their reactivity toward various transient C radicals, some nitroxides can be easily stored under air at room temperature. Furthermore, nitroxides can be oxidized to oxoammonium salts (R1R2N═O+) or reduced to anions (R1R2N-O-), enabling them to act as valuable oxidants or reductants depending on their oxidation state. Therefore, they exhibit interesting reactivity across all three oxidation states. Due to these fascinating properties, nitroxides find extensive applications in diverse fields such as biochemistry, medicinal chemistry, materials science, and organic synthesis. This review focuses on the versatile applications of nitroxides in organic synthesis. For their use in other important fields, we will refer to several review articles. The introductory part provides a brief overview of the history of nitroxide chemistry. Subsequently, the key methods for preparing nitroxides are discussed, followed by an examination of their structural diversity and physical properties. The main portion of this review is dedicated to oxidation reactions, wherein parent nitroxides or their corresponding oxoammonium salts serve as active species. It will be demonstrated that various functional groups (such as alcohols, amines, enolates, and alkanes among others) can be efficiently oxidized. These oxidations can be carried out using nitroxides as catalysts in combination with various stoichiometric terminal oxidants. By reducing nitroxides to their corresponding anions, they become effective reducing reagents with intriguing applications in organic synthesis. Nitroxides possess the ability to selectively react with transient radicals, making them useful for terminating radical cascade reactions by forming alkoxyamines. Depending on their structure, alkoxyamines exhibit weak C-O bonds, allowing for the thermal generation of C radicals through reversible C-O bond cleavage. Such thermally generated C radicals can participate in various radical transformations, as discussed toward the end of this review. Furthermore, the application of this strategy in natural product synthesis will be presented.

Metal-free oxoammonium salt-mediated C(sp3)-H oxidative Ugi-azide multicomponent reaction

In this work, an efficient oxidative C(sp³)-H Ugi-azide multicomponent reaction of cyclic benzylic amines to the corresponding α-tetrazolo compounds using a TEMPO salt as mild hydride abstractor-type oxidant is reported. This simple one-pot approach allows the direct functionalization of N-heterocycles such as tetrahydroisoquinolines with a variety of isocyanides and NaN₃ as a practical azide source. The reaction proceeds at room temperature and without the need of acid additives, allowing for the use of sensitive substrates, while minimizing isocyanide polymerization to provide the desired heterocycle-tetrazole products in synthetically useful yields (up to 99%).

A novel base-metal multifunctional catalyst for the synthesis of 2-amino-3-cyano-4H-chromenes by a multicomponent tandem oxidation process

A novel base-metal multifunctional nanomagnetic catalyst is prepared by the immobilization of tungstate anions onto γ-Fe2O3 supported with imidazolium moieties. The (γ-Fe2O3-Im-Py)2WO4 was fully characterized using FT-IR, XPS, TEM, FESEM, ICP, TGA, VSM and XRD and used as a multifunctional heterogeneous catalyst for the synthesis of 2-amino-3-cyano-4H-chromenes via a multicomponent tandem oxidation process starting from alcohols under solvent-free conditions. During this process, tungstate catalyzes the oxidation of a wide range of alcohols in the presence of TBHP as a clean source. The in-situ formed aldehydes are condensed with malononitrile and β-dicarbonyl compounds/naphthols/4-hydroxycumarin through promotion by pyridine and imidazolium moieties of the catalyst. By this method, a variety of 2-amino-3-cyano-4H-chromenes are generated in good to high yields from alcohols as inexpensive and easily available starting materials. The catalyst is recovered easily by the aid of an external magnetic field and reused in five successive runs with insignificant decreasing activity.

Divergent Electrochemical Carboamidation of Cyclic Amines

We developed an electrochemical carboamidation sequence that affords either cyclic β-amidoamine products via direct functionalization or linear hydroxybisamide products via a ring opening pathway. The reaction pathway was dependent on the nature of the N-acyl activating group, with carbamate groups favoring direct isocyanide addition to the N-acyliminium ion intermediate and the benzoyl activating group favoring the ring opening-functionalization pathway. Both protocols are one-pot reaction sequences, have general applicability, and lead to peptide-like products of greatly increased molecular complexity.

Fe(III)-Catalyzed N-Amidomethylation of Secondary and Primary Anilines with TosMIC

A Fe(III)-catalyzed N-amidomethylation of secondary and primary anilines with p-toluenesulfonylmethyl isocyanide (TosMIC) in water is described. TosMIC plays dual roles as the source of methylene as well as an amidating reagent to form α-amino amides in this multicomponent reaction. The combination of TosMIC and other isocyanides was also investigated to give the desired products in acceptable yields. The current protocol features use of iron catalyst and nontoxic media, broad substrate scope, mild conditions, and operational simplicity.

Cu(OTf)2 catalyzed Ugi-type reaction of N,O-acetals with isocyanides for the synthesis of pyrrolidinyl and piperidinyl 2-carboxamides

The Cu(OTf)₂ catalyzed Ugi-type reactions of N,O-acetals with isocyanides have been described for the synthesis of pyrrolidinyl and piperidinyl 2-carboxamides. 4-Hydroxy-5-substituted-prolinamides can be obtained in high diastereoselectivities (2,4-cis/trans > 19 : 1) and a stereoselective model was proposed for 2,4-cis selectivity. Moreover, 4-F-VH 032, a novel analog of the VHL ligand, was conveniently obtained by utilizing the present method.

Synthetic Route to Enaminones via Metal-Free Four-Component Sequential Reactions of Aryl Olefins with CHCl3, Et3N, and TBHP

An efficient and modular strategy was used to obtain enaminones with a wide range of functional groups via a four-component sequential reaction. This reaction proceeded under mild conditions without a catalyst in one pot. Furthermore, the products could be transformed into thiadiazoles.

Electrochemical TEMPO-Catalyzed Oxidative Ugi-Type Reaction

Oxidative isocyanide-based multicomponent reactions (oxidative IMCRs) are very useful tools for the rapid construction of molecular diversity starting from readily available and stable substrates. Despite all their benefits, such multicomponent reactions are underdeveloped and strictly limited to 3-component processes. Indeed, in the presence of several reaction partners, the oxidation event needs to be rigorously chemoselective, which becomes incredibly more intricate as the number of reactive components increases. Nonetheless, we could overcome this significant pitfall and reach the first oxidative Ugi-type 4-IMCR by capitalizing on a very mild and green TEMPO-catalyzed electro-oxidation process. Employing alcohols as aldehyde surrogates and in the notable absence of any supporting electrolyte, this transformation proved to be extremely chemoselective in the presence of an amine and was compatible with a wide range of alcohols, amines, isocyanides, and carboxylic acids.

C(sp3)–H functionalization with isocyanides

This review highlights the state-of-the-art advances in C(sp³)–H functionalization involving isocyanides through the synergistic combination of isocyanide insertion and C(sp³)–H bond activation.

Recent advances in multi-component reactions and their mechanistic insights: a triennium review

This review summarizes the recent developments in MCRs, incorporating different strategies along with their mechanistic aspects.

Cyclic Imines in Ugi and Ugi-Type Reactions

Ugi four-component reactions (U-4CRs) are widely recognized as being highly efficient for the synthesis of pseudopeptides. However, the products of these reactions are not so interesting as drug candidates because they are not conformationally restricted enough for a potent interaction with biological targets. One possible way to overcome this problem is to replace amine and oxo components in the U-4CRs with cyclic imines in so-called Joullié-Ugi three-component reactions (JU-3CRs). This approach provides a robust single-step route to peptide moieties connected to N-heterocyclic motifs that are found as core skeletons in many natural products and pharmaceutical compounds. JU-3CRs also provide much better diastereoselectivity than their four-component analogues. We survey here the redesign of many synthetic routes for the efficient preparation of a wide variety of three-, five-, six-, and seven-membered heterocyclic compounds connected to the peptide backbone. Additionally, in the Ugi reactions based on the cyclic imines, α-acidic isocyanides, or azides can be replaced with normal isocyanides or acids, respectively, leading to the synthesis of N-heterocycles attached to oxazoles or tetrazoles, which are of great pharmaceutical significance. This Review includes all research articles related to Ugi reactions based on the cyclic imines to the year 2020 and will be useful to chemists in designing novel synthetic routes for the synthesis of individual and combinatorial libraries of natural products and drug-like compounds.