Highly Conjugated, Fused-Ring, Quadrupolar Organic Chromophores with Large Two-Photon Absorption Cross-Sections in the Near-Infrared

Interpretable Machine Learning of Two-Photon Absorption

Molecules with strong two-photon absorption (TPA) are important in many advanced applications such as upconverted laser and photodynamic therapy, but their design is hampered by the high cost of experimental screening and accurate quantum chemical (QC) calculations. Here a systematic study is performed by collecting an experimental TPA database with ≈900 molecules, analyzing with interpretable machine learning (ML) the key molecular features explaining TPA magnitudes, and building a fast ML model for predictions. The ML model has prediction errors of similar magnitude compared to experimental and affordable QC methods errors and has the potential for high-throughput screening as additionally validated with the new experimental measurements. ML feature analysis is generally consistent with common beliefs which is quantified and rectified. The most important feature is conjugation length followed by features reflecting the effects of donor and acceptor substitution and coplanarity.

In Silico Designing of Thieno[2,3-b]thiophene Core-Based Highly Conjugated, Fused-Ring, Near-Infrared Sensitive Non-fullerene Acceptors for Organic Solar Cells

The performance of organic solar cells (OSCs) has been improving steadily over the last few years, owing to the optimization of device fabrication, fine-tuning of morphology, and thin-film processing. Thiophene core containing fused ring-type non-fullerene acceptors (NFAs) achieved significant proficiency for highly efficient OSCs. Quantum chemical computations are utilized herein with the motive of suggesting new NIR sensitive, highly efficient low-band gap materials for OSCs. A series of extended conjugated A-π-D-π-A architectured novel fused-ring NFAs (FUIC-1-FUIC-6) containing thieno[2,3-b]thiophene-based donor core are proposed by substituting the end-capped units of synthesized molecule F10IC. Different properties including frontier molecular orbital analysis, density of states analysis, transition density matrix analysis, excitation energy, reorganizational energies of both holes (λ_h) and electrons (λ_e), and open-circuit voltage (V _oc) were performed employing the density functional theory approach. Charge transfer analysis of the best-designed molecule with the donor complex was analyzed to comprehend the efficiency of novel constructed molecules (FUIC-1-FUIC-6) and compared with the reference. End-caped acceptor alteration induces the reduction of the energy gap between HOMO-LUMO (1.88 eV), tunes the energy levels, longer absorption in the visible and near-infrared regions, larger V _oc, smaller reorganizational energies, and binding energy values in designed structures (FUIC-1-FUIC-6) in comparison to reference (FUIC). The designed molecules show the best agreement with the PTBT-T donor polymer blend and cause the highest charge from the HOMO to the LUMO orbital. Our findings predicted that thieno[2,3-b] thiophene-based newly designed molecules would be efficient NFAs with outstanding photovoltaic characteristics and can be used in future applications of OSCs.

The principles, design and applications of fused-ring electron acceptors

Fused-ring electron acceptors (FREAs) have a donor-acceptor-donor structure comprising an electron-donating fused-ring core, electron-accepting end groups, π-bridges and side chains. FREAs possess beneficial features, such as feasibility to tailor their structures, high property tunability, strong visible and near-infrared light absorption and excellent n-type semiconducting characteristics. FREAs have initiated a revolution to the field of organic solar cells in recent years. FREA-based organic solar cells have achieved unprecedented efficiencies, over 20%, which breaks the theoretical efficiency limit of traditional fullerene acceptors (~13%), and boast potential operational lifetimes approaching 10 years. Based on the original studies of FREAs, a variety of new structures, mechanisms and applications have flourished. In this Review, we introduce the fundamental principles of FREAs, including their structures and inherent electronic and physical properties. Next, we discuss the way in which the properties of FREAs can be modulated through variations to the electronic structure or molecular packing. We then present the current applications and consider the future areas that may benefit from developments in FREAs. Finally, we conclude with the position of FREA chemistry, reflecting on the challenges and opportunities that may arise in the future of this burgeoning field.

Synthesis and Emergent Photophysical Properties of Diketopyrrolopyrrole-Based Supramolecular Self-Assembly

Diketopyrrolopyrrole (DPP)-based molecular semiconductors exhibit intriguing optical and charge transport properties. Herein, we rationally design a series of electronically identical but structurally distinct Hamilton receptor (HR)-based supramolecular assembly of DPP. The HR endows supramolecular assemblies via hydrogen bonding with enhanced structural ordering and excitonic couplings. The mechanism of supramolecular self-assembly was probed by diffusion ordered spectroscopy (DOSY) nuclear magnetic resonance (NMR) and solid-state IR spectroscopy studies. We investigated the morphology of self-assembly, photophysical and electrochemical properties and compared them with the identical DPP molecular structures without HRs. The microstructure of self-assembly was probed with atomic force microscopy in thin films. Subsequently, the influence of solid-state packing was studied by single-crystal X-ray diffraction. The single-crystal structure of HR-TDPP-C₂₀ reveals slipped stack arrangements between the two neighboring chromophores with π-π stacking distance and slip angle of 3.55 Å and 35.4°, respectively. Notably, the slight torsional angle of 1° between thiophene and lactam rings and small π-π stacking distance suggest a significant intermolecular coupling between thiophene (D) and lactam (A) rings. This intramolecular coupling between two π-π chromophore stacks manifests in their optical properties. In this manuscript, we report rational design and synthesis of supramolecular self-assembly of DPP with a collection of compelling structural and optical properties.

Nonlinear plexcitons: excitons coupled with plasmons in two-photon absorption

The nonlinear optical properties of a D-A (donor-acceptor) conjugated organic molecule with polythiophene (PT) as the donor and indene-C₆₀ bisadduct (IC₆₀BA) as the acceptor are theoretically investigated, which exhibits a large two-photon absorption (TPA) cross-section up to 8000 GM at the wavelength of 780 nm. Combining surface plasmon resonances (SPRs) with nonlinear optics, nonlinear properties can be strongly enhanced. In this paper, an appropriate nonlinear plexciton method by the coupling of Au@Ag nanorods and an Ag film is designed, in which the TPA properties of the PT:IC₆₀BA complex can be increased by 10⁶ times. The angle dependence on polarization and incidence is investigated to obtain the maximum of plasmonic enhancement. Our results emphasize the physical mechanism of nonlinear plexcitons and provide a feasible method to improve the nonlinear properties of organic solar cell materials.

Enriching NLO efficacy via designing non-fullerene molecules with the modification of acceptor moieties into ICIF2F: an emerging theoretical approach

Non-fullerene (NF)-based compounds have attracted much attention as compared to fullerene-based materials because of their promising optoelectronic properties, lower synthetic cost and greater stability. Usually, the end-capped groups have a promising impact in magnifying the nonlinear optical (NLO) characteristics in the non-fullerene molecules. Based on this, a series of new NLO active non-fullerene molecules (NFAD2-NFAD6) have been established. The non-fullerene molecules (NFAD2-NFAD6) were designed by end-capped modification in acceptor moieties of the reference (NFAR1), while donor and π-bridge moieties were kept the same in the entire series. Quantum chemistry-based calculations at the M06/6-311G(d,p) level were done to determine the NLO characteristics and for other supportive analyses. The acceptor and donor moieties were utilized at the opposite terminals of NFAD2-NFAD6, which proved to be an effective approach in tuning the FMO band gap. Overall the results of natural bond orbital (NBO), density of state (DOS) and transition density matrices (TDMs) analyses supported the NLO properties of the designed compounds. Among all the studied compounds, NFAD4 was proven to be the most suitable candidate due to its promising NLO properties, well supported by a lower bandgap of 1.519 eV and a maximum absorption wavelength of 999.550 nm. Therefore, NFAD4 was reported with greater amplitude of dipole polarizability (10.429 e.s.u), average polarizability (2.953 × 10^-22 e.s.u), first hyperpolarizability (13.16 × 10^-27 e.s.u.) and second hyperpolarizability (2.150 × 10^-31 e.s.u.) than other derivatives and NFAR1. Subsequently, the present study depicted the significance of utilizing different non-fullerene (NF)-based acceptor moieties to achieve the promising NLO material. This computational study may lead towards new plausible pathways for researchers to design potent NLO substances for impending hi-tech applications.

Effect of tunable π bridge on two-photon absorption property and intramolecular charge transfer process of polycyclic aromatic hydrocarbons

The influences of the conjugation effect on the charge transfer and nonlinear optical (NLO) properties of polycyclic aromatic hydrocarbons (PAHs) are comprehensively investigated at the microscopic molecular level. We found that the conjugation effect of π bridge is negatively correlated with molecular planarity, excitation energy, two-photon absorption (TPA) cross-section, and the second hyperpolarizability. For the first time, the charge transfer matrix (CTM) is applied to the molecular two-photon transition process. Combining the charge difference density (CDD) diagram with CTM heat map to visually quantitative investigate the characteristics of excited states, the charge transfer path and transfer amount between atoms. During the two-photon transition of all molecules, the electronic excited state is locally excited. Compared with the first process, the range of intramolecular charge transfer in the second process of the two-photon transition is expanded. Comprehensive results prove that the π bridge with large conjugation effect distorts the molecular structure, which is not conducive to the intramolecular charge transfer. Therefore, the molecule DBP-1 with a carbon-carbon double bond as the π bridge has the largest transition dipole moments, TPA cross-section, and second static hyperpolarizability. Our research method can provide effective guidance for the design and optimization of nonlinear organic conjugated molecular materials.

Benzothiadiazole-Substituted Aza-BODIPY Dyes: Two-Photon Absorption Enhancement for Improved Optical Limiting Performances in the Short-Wave IR Range

Aza-boron dipyrromethenes (aza-BODIPYs) presenting a benzothiadiazole substitution on upper positions are described. The strong electron-withdrawing effect of the benzothiadiazole moiety permits enhancement of the accepting strength and improves the delocalization of the aza-BODIPY core to attain a significant degree of electronic communication between the lower donating groups and the upper accepting groups. The nature of the intramolecular charge transfer is studied both experimentally and theoretically. Linear spectroscopy highlighted the strongly redshifted absorption and emission of the synthesized molecules with recorded fluorescence spectra over 1000 nm. Nonlinear optical properties were also investigated. Strong enhancement of the two-photon absorption of the substituted dyes compared with the unsubstituted one (up to 4520 GM at 1300 nm) results in an approximately 15-20 % improvement of the optical power limiting performances. These dyes are therefore a good starting point for further improvement of optical power limiting in the short-wave IR range.

Large Nonlinear Optical Activity of a Near-infrared-absorbing Bithiophene-based Polymer with a Head-to-head Linkage

Although the production of near-infrared (NIR)-absorbing organic polymers with an excellent nonlinear optical (NLO) response is vital for various optoelectronic devices and photodynamic therapy, the molecular design and relevant photophysical investigation still remain challenging. In this work, large NLO activity is observed for an NIR-absorbing bithiophene-based polymer with a unique head-to-head linkage in the NIR region. The saturable absorption coefficient and modulation depth of the polymer are determined as ∼-3.5×10⁵  cm GW^-1 and ∼32.43%, respectively. Notably, the polymer exhibits an intrinsic nonlinear refraction index up to ∼-9.36 cm²  GW^-1 , which is six orders of magnitude larger than that of CS₂ . The maximum molar-mass normalized two-photon absorption cross-section (σ₂ /M) of this polymer can be up to ∼14 GM at 1200 nm. Femtosecond transient absorption measurements reveal significant spectral overlap between the 2PA and excited state absorption in the 1000-1400 nm wavelength range and an efficient triplet quantum yield of ∼36.7%. The results of this study imply that this NIR-absorbing polymer is promising for relevant applications.

Fused-Ring Electron Acceptors for Photovoltaics and Beyond

ConspectusEmerging solar cells that convert clean and renewable solar energy to electricity, such as organic solar cells (OSCs) and perovskite solar cells (PSCs), have attracted increasing attention owing to some merits such as facile fabrication, low cost, flexibility, and short energy payback time. The power conversion efficiencies (PCEs) of OSCs and PSCs have exceeded 18% and 25%, respectively.Fullerene derivatives have high electron affinity and mobility with an isotropic transport feature. Fullerene-based OSCs yielded superior PCEs to other acceptors and have dominated electron acceptor materials from 1995 to 2015. However, some drawbacks of fullerenes, such as weak visible absorption, limited tunability of electronic properties, laborious purification, and morphological instability, restrict further development of OSCs toward higher PCEs and practical applications. The theoretical PCE of fullerene-based OSCs is limited to ∼13% due to the relatively large energy losses. Many efforts have been dedicated to developing new acceptor systems beyond fullerenes, and some successful systems such as rylene diimides have achieved PCEs up to ca. 11%.In 2015, our group pioneered a new class of electron acceptors, fused-ring electron acceptor (FREA), as represented by the star molecule ITIC. The chemical features of FREAs include: (1) a modular structure, consisting of an electron-donating core, electron-withdrawing end groups, π-bridges, and side chains, which benefits molecular tailoring; (2) facile synthesis, purification, and scalability. The physical features of FREAs include: (1) a broad modulation range of absorption and energy levels; (2) strong absorption, especially in the 700-1000 nm region; (3) high electron mobility. The device features of FREAs include: (1) low voltage loss; (2) high efficiency; (3) good stability. The FREAs boosted PCEs of the OSCs up to 18% and initiated the transformation from the fullerene to nonfullerene era of this field. FREAs can also be used in PSCs as interfacial layers, electron transport layers, or active layers, improving both efficiency and stability of the devices. Beyond photovoltaic applications, FREAs can also be used in photodetectors, field-effect transistors, two-photon absorption, photothermal therapy, solar water splitting, etc.In this Account, we review the development of the FREAs and their applications in OSCs, PSCs, and other related fields. Molecular design, device engineering, photophysics, and applications of FREAs are discussed in detail. Future research directions toward performance optimization and commercialization of FREAs are also proposed.

Near-infrared dyes for two-photon absorption in the short-wavelength infrared: strategies towards optical power limiting

The recent advances in the field of two-photon absorbing chromophores in the short-wavelength infrared spectral range (SWIR 1100–2500 nm) are summarized, highlighting the development of optical power limiting devices in this spectral range.