Toward Quantitative Nanothermometry Using Single-Molecule Counting

Optical super-resolution nanothermometry via stimulated emission depletion imaging of upconverting nanoparticles

From engineering improved device performance to unraveling the breakdown of classical heat transfer laws, far-field optical temperature mapping with nanoscale spatial resolution would benefit diverse areas. However, these attributes are traditionally in opposition because conventional far-field optical temperature mapping techniques are inherently diffraction limited. Optical super-resolution imaging techniques revolutionized biological imaging, but such approaches have yet to be applied to thermometry. Here, we demonstrate a super-resolution nanothermometry technique based on highly doped upconverting nanoparticles (UCNPs) that enable stimulated emission depletion (STED) super-resolution imaging. We identify a ratiometric thermometry signal and maintain imaging resolution better than ~120 nm for the relevant spectral bands. We also form self-assembled UCNP monolayers and multilayers and implement a detection scheme with scan times >0.25 μm2/min. We further show that STED nanothermometry reveals a temperature gradient across a joule-heated microstructure that is undetectable with diffraction limited thermometry, indicating the potential of this technique to uncover local temperature variation in wide-ranging practical applications.

Plasmonic Nanoparticles Boost Solar-to-Electricity Generation at Ambient Conditions

Sunlight-to-electricity conversion using solar thermoelectric generators (STEGs) is a proven technology to meet our ever-growing energy demand. However, STEGs are often operated under a vacuum with customized thermoelectric materials to achieve high performance. In this work, the incorporation of plasmonic gold nanoparticle (AuNP) based solar absorbers enabled the efficient operation of STEGs under ambient conditions with commercially available thermoelectric devices. AuNPs enhanced the performance of STEG by ∼9 times, yielding an overall solar-to-electricity conversion efficiency of ∼9.6% under 7.5 W cm-2 solar irradiance at ambient conditions. Plasmonic heat dissipated by AuNPs upon solar irradiation was used as the thermal energy source for STEGs. High light absorptivity, photothermal conversion efficiency (∼95%), and thermal conductivity of AuNPs enabled the efficient generation and transfer of heat to STEGs, with minimal radiative and convective heat losses. The power generated from plasmon-powered STEGs is used to run electrical devices as well as produce green hydrogen via the electrolysis of water.

Thermometries for Single Nanoparticles Heated with Light

The development of efficient nanoscale photon absorbers, such as plasmonic or high-index dielectric nanostructures, allows the remotely controlled release of heat on the nanoscale using light. These photothermal nanomaterials have found applications in various research and technological fields, ranging from materials science to biology. However, measuring the nanoscale thermal fields remains an open challenge, hindering full comprehension and control of nanoscale photothermal phenomena. Here, we review and discuss existent thermometries suitable for single nanoparticles heated under illumination. These methods are classified in four categories according to the region where they assess temperature: (1) the average temperature within a diffraction-limited volume, (2) the average temperature at the immediate vicinity of the nanoparticle surface, (3) the temperature of the nanoparticle itself, and (4) a map of the temperature around the nanoparticle with nanoscale spatial resolution. In the latter, because it is the most challenging and informative type of method, we also envisage new combinations of technologies that could be helpful in retrieving nanoscale temperature maps. Finally, we analyze and provide examples of strategies to validate the results obtained using different thermometry methods.

Multimode adaptive logic gates based on temperature-responsive DNA strand displacement

Living organisms switch their intrinsic biological states to survive environmental turbulence, in which temperature changes are prevalent in nature. Most artificial temperature-responsive DNA nanosystems work as switch modules that transit between "ON-OFF" states, making it difficult to construct nanosystems with diverse functions. In this study, we present a general strategy to build multimode nanosystems based on a temperature-responsive DNA strand displacement reaction. The temperature-responsive DNA strand displacement was controlled by tuning the sequence of the substrate hairpin strands and the invading strands. The nanosystems were demonstrated as logic gates that performed a set of Boolean logical functions at specific temperatures. In addition, an adaptive logic gate was fabricated that could exhibit different logic functions when placed in different temperatures. Specifically, upon the same input strands, the logic gate worked as an XOR gate at 10 °C, an OR gate at 35 °C, an AND gate at 46 °C, and was reset at 55 °C. The design and fabrication of the multifunctional nanosystems would help construct advanced temperature-responsive systems that may be used for temperature-controlled multi-stage drug delivery and thermally-controlled multi-step assembly of nanostructures.

Impact of bimetallic interface design on heat generation in plasmonic Au/Pd nanostructures studied by single-particle thermometry

Localized surface plasmons are lossy and generate heat. However, accurate measurement of the temperature of metallic nanoparticles under illumination remains an open challenge, creating difficulties in the interpretation of results across plasmonic applications. Particularly, there is a quest for understanding the role of temperature in plasmon-assisted catalysis. Bimetallic nanoparticles combining plasmonic with catalytic metals are raising increasing interest in artificial photosynthesis and the production of solar fuels. Here, we perform single-particle thermometry measurements to investigate the link between morphology and light-to-heat conversion of colloidal Au/Pd nanoparticles with two different configurations: core-shell and core-satellite. It is observed that the inclusion of Pd as a shell strongly reduces the photothermal response in comparison to the bare cores, while the inclusion of Pd as satellites keeps photothermal properties almost unaffected. These results contribute to a better understanding of energy conversion processes in plasmon-assisted catalysis.

Real-Time Interfacial Nanothermometry Using DNA-PAINT Microscopy

Biofunctionalized nanoparticles are increasingly used in biomedical applications including sensing, targeted delivery, and hyperthermia. However, laser excitation and associated heating of the nanomaterials may alter the structure and interactions of the conjugated biomolecules. Currently no method exists that directly monitors the local temperature near the material's interface where the conjugated biomolecules are. Here, a nanothermometer is reported based on DNA-mediated points accumulation for imaging nanoscale topography (DNA-PAINT) microscopy. The temperature dependent kinetics of repeated and reversible DNA interactions provide a direct readout of the local interfacial temperature. The accuracy and precision of the method is demonstrated by measuring the interfacial temperature of many individual gold nanoparticles in parallel, with a precision of 1 K. In agreement with numerical models, large particle-to-particle differences in the interfacial temperature are found due to underlying differences in optical and thermal properties. In addition, the reversible DNA interactions enable the tracking of interfacial temperature in real-time with intervals of a few minutes. This method does not require prior knowledge of the optical and thermal properties of the sample, and therefore opens the window to understanding and controlling interfacial heating in a wide range of nanomaterials.