The Partitioning of Small Aromatic Molecules to Air–Water and Phospholipid Interfaces Mediated by Non-Hydrophobic Interactions

Interaction of L-phenylalanine with carbonyl groups in mixed lipid membranes

The interaction of L-Phe with the membrane components, i.e., lipids and proteins, has been discussed in the current literature due to the interest to understand the effect of single amino acids in relation to the formation of amyloid aggregates. In the present work, it is shown that L-Phe interacts with 9:1 DMPC (1,2-dimyristoyl-sn-glycero-3 phosphocholine)/DPPC (1,2-dipalmitoyl-sn-glycero-3 phosphocholine) mixtures but not in the 1:9 one. An important observation is that the interaction disappears when DPPC is replaced by diether PC (2-di-O-hexadecyl-sn-glycero-3-phosphocholine) a lipid lacking carbonyl groups (CO). This denotes that CO groups may interact specifically with L-Phe in accordance with the appearance of a new peak observed by Infrared spectroscopy (FTIR-ATR). The interaction of L-Phe affects the compressibility pattern of the 9:1 DMPC/DPPC mixture which is congruent with the changes observed by Raman spectra. The specific interaction of L-Phe with CO, propagates to phosphate and choline groups in this particular mixture as analyzed by FTIR-ATR spectroscopy and is absent when DMPC is dopped with diether PC.

Experimental determination of the partitioning of representative organic pollutants to the air-water interface

Using glancing-angle laser-induced fluorescence (GALIF) spectroscopy as a probe, the partitioning of naphthalene, fluoranthene, pyrene, umbelliferone, phenol red, and bisphenol A from bulk solution to the air-water interface was examined in both pure water and aqueous solutions of 6 mM octanol. Previous studies provided similar Langmuir adsorption isotherms for anthracene and imidazole 2-carboxaldehyde. The surface partitioning behaviour of each compound in both environments was well described using a Langmuir adsorption model; partitioning coefficients were derived from the fits to such isotherms. Only the PAH molecules, naphthalene, fluoranthene and pyrene, saw an enhancement in the surface partitioning in octanol solution compared to pure water. The surface partitioning to pure water surfaces could be fairly well described using a one parameter linear free energy relationship based on either solubility or KOW.

Adverse Biophysical Impact of e-Cigarette Flavors on Pulmonary Surfactant

The attractiveness and abundance of flavors are primary factors eliciting youth to use e-cigarettes. Emerging studies in recent years revealed the adverse health impact of e-cigarette flavoring chemicals, including disruption of the biophysical function of pulmonary surfactants in the lung. Nevertheless, a comprehensive understanding of the biophysical impact of various flavoring chemicals is still lacking. We used constrained drop surfactometry as a new alternative method to study the biophysical impact of flavored e-cigarette aerosols on an animal-derived natural pulmonary surfactant. The dose of exposure to e-cigarette aerosols was quantified with a quartz crystal microbalance, and alterations to the ultrastructure of the surfactant film were visualized using atomic force microscopy. We have systematically studied eight representative flavoring chemicals (benzyl alcohol, menthol, maltol, ethyl maltol, vanillin, ethyl vanillin, ethyl acetate, and ethyl butyrate) and six popular recombinant flavors (coffee, vanilla, tobacco, cotton candy, menthol/mint, and chocolate). Our results suggested a flavor-dependent inhibitory effect of e-cigarette aerosols on the biophysical properties of the pulmonary surfactant. A qualitative phase diagram was proposed to predict the hazardous potential of various flavoring chemicals. These results provide novel implications in understanding the environmental, health, and safety impacts of e-cigarette aerosols and may contribute to better regulation of e-cigarette products.

Amino Acids Are Driven to the Interface by Salts and Acidic Environments

Amino acids (AAs), the building blocks of proteins, are enriched by several orders of magnitude in sea spray aerosols compared to ocean waters. This suggests that AAs may reside at the air-water interface and be highly surface active. Using surface tension measurements, infrared reflection-absorption spectroscopy, and molecular dynamics simulations, we show that AAs are surface active and that salts and low-pH environments are drivers of surface activity. At typical sea spray salt concentrations and pH values, we determine that the surface coverage of hydrophobic AAs increases by approximately 1 order of magnitude. Additionally, divalent cations such as Ca²⁺ and Mg²⁺ can further increase AA surface propensity, particularly at neutral pH. Overall, these results indicate that AAs are likely to be found at increased concentrations at the surface of sea spray aerosols, where they can impact the cloud activation properties of the aerosol and enhance peptide formation under certain conditions.

Mechanistic Understanding from Molecular Dynamics in Pharmaceutical Research 2: Lipid Membrane in Drug Design

We review the use of molecular dynamics (MD) simulation as a drug design tool in the context of the role that the lipid membrane can play in drug action, i.e., the interaction between candidate drug molecules and lipid membranes. In the standard "lock and key" paradigm, only the interaction between the drug and a specific active site of a specific protein is considered; the environment in which the drug acts is, from a biophysical perspective, far more complex than this. The possible mechanisms though which a drug can be designed to tinker with physiological processes are significantly broader than merely fitting to a single active site of a single protein. In this paper, we focus on the role of the lipid membrane, arguably the most important element outside the proteins themselves, as a case study. We discuss work that has been carried out, using MD simulation, concerning the transfection of drugs through membranes that act as biological barriers in the path of the drugs, the behavior of drug molecules within membranes, how their collective behavior can affect the structure and properties of the membrane and, finally, the role lipid membranes, to which the vast majority of drug target proteins are associated, can play in mediating the interaction between drug and target protein. This review paper is the second in a two-part series covering MD simulation as a tool in pharmaceutical research; both are designed as pedagogical review papers aimed at both pharmaceutical scientists interested in exploring how the tool of MD simulation can be applied to their research and computational scientists interested in exploring the possibility of a pharmaceutical context for their research.

Phenylalanine Interacts with Oleic Acid-Based Vesicle Membrane. Understanding the Molecular Role of Fibril-Vesicle Interaction under the Context of Phenylketonuria

In the present contribution, on the basis of a spectroscopic and microscopic investigation, the characterization and photophysics of various assemblies of oleic acid/oleate solution at three pH values, namely, 8.28, 9.72, and 11.77, were explored. The variation in the dynamic response of aqua molecules in and around the assemblies has been interrogated by a picoseconds solvation dynamics experiment using a time-correlated single-photon counting setup employing coumarin-153 as a probe. On the one hand, the time-resolved fluorescence anisotropy measurement along with the fluorescence correlation spectroscopy experiment was executed to extract information regarding the comparison of the extent of the internal restricted confinement of these assemblies. On the other hand, an effort to investigate the cross-interaction between the self-assembled architectures of l-phenylalanine (l-Phe), responsible for phenylketonuria (PKU) disorder, and the oleic acid at the vesicle-forming pH established that the l-Phe fibrillar morphologies strongly alter the dynamic properties of the vesicle membrane formed by the oleic acid. Specifically, the interaction of the l-Phe assemblies with the oleic acid vesicle membrane is found to introduce the flexibility of the vesicle membrane and alter the hydration properties of the membrane. To track the fibril-induced alterations of the oleic acid vesicle properties, various spectroscopic and microscopic investigations were performed. The mutual reconciliation of the experimental outputs, therefore, portrays the state of the art, which accounts for the fibril-induced alterations of the properties of the oleic acid vesicle membrane, the mimicking setup of the cellular membrane, thereby informing us that alterations of such a property of the membrane should be taken into active consideration during the rational development of therapeutic modulators against disorders like PKU.

Multiscale Modeling Strategy of 2D Covalent Organic Frameworks Confined at an Air-Water Interface

Two-dimensional covalent organic frameworks (2D COFs) have attracted attention as versatile active materials in many applications. Recent advances have demonstrated the synthesis of monolayer 2D COF via an air-water interface. However, the interfacial 2D polymerization mechanism has been elusive. In this work, we have used a multiscale modeling strategy to study dimethylmethylene-bridged triphenylamine building blocks confined at the air-water interface to form a 2D COF via Schiff-base reaction. A synergy between the computational investigations and experiments allowed the synthesis of a 2D-COF with one of the linkers considered. Our simulations complement the experimental characterization and show the preference of the building blocks to be at the interface with a favorable orientation for the polymerization. The air-water interface is shown to be a key factor to stabilize a flat conformation when a dimer molecule is considered. The structural and electronic properties of the monolayer COFs based on the two monomers are calculated and show a semiconducting nature with direct bandgaps. Our strategy provides a first step toward the in silico polymerization of 2D COFs at air-water interfaces capturing the initial steps of the synthesis up to the prediction of electronic properties of the 2D material.

Theoretical Chemistry and the Calculation of the Atmospheric State

Theoretical chemists have been actively engaged for some time in processes such as ozone photodissociation, overtone photodissociation in nitric acid, pernitric acid, sulphuric acid, clusters and in small organic acids. The last of these have shown very different behaviours in the gas phase, liquid phase and importantly at the air–water interface in aqueous aerosols. The founder of molecular dynamics, B J Alder, pointed out long ago that hydrodynamic behaviour emerged when the symmetry of a random, thermalised population of hard spheres—billiard balls—was broken by a flux of energetic molecules. Despite this, efforts over two centuries to solve turbulence by finding top-down solutions to the Navier–Stokes equation have failed. It is time for theoretical chemistry to try a bottom-up solution. Gibbs free energy that drives the circulation arises from the entropy difference between the incoming low-entropy beam of visible and ultraviolet photons and the outgoing higher-entropy flux of infrared photons over the whole 4π solid angle. The role of the most energetic molecules with the highest velocities will affect the rovibrational line shapes of water, carbon dioxide and ozone in the far wings, where there is the largest effect on radiative transfer and hence on calculations of atmospheric temperature. The atmospheric state is determined by the interaction of radiation, chemistry and fluid dynamics on the microscopic scale, with propagation through the mesoscale to the macroscale. It will take theoretical chemistry to simulate that accurately. A challenging programme of research for theoretical chemistry is proposed, involving ab initio simulation by molecular dynamics of an air volume, starting in the upper stratosphere. The aim is to obtain scaling exponents for turbulence, providing a physical method for upscaling in numerical models. Turbulence affects chemistry, radiation and fluid dynamics at a fundamental, molecular level and is thus of basic concern to theoretical chemistry as it applies to the atmosphere, which consists of molecules in motion.

Aging-Dependent Morphological Crystallinity Determines Membrane Activity of l-Phenylalanine Self-Assembles

Amyloid polymorphism has emerged as an important topic of research in recent years to identify the particular species responsible for several neurodegenerative disorders, whereas the concept is overlooked in the case of the simplest building block, that is, l-phenylalanine (l-Phe) self-assembly. Here, we report the first evidence of l-Phe polymorphism and the conversion of metastable helical fibrillar to thermodynamically stable rodlike crystalline morphologies with increasing time and temperature. Furthermore, only the fibrillar l-Phe polymorph shows a significant modulation of the model membrane. In addition, the l-Phe molecules prefer to arrange in a multilayered rodlike fashion than in a lateral arrangement, which reduces the membrane binding ability of the l-Phe polymorph due to the decrease in the partial charge of the N-terminal of l-Phe units. The present work exemplifies a different approach to understanding l-Phe self-assembly and provides an effective strategy for the therapy of phenylketonuria by scrutinizing the discrete membrane activity of different l-Phe polymorphs.

Antagonist Effects of l-Phenylalanine and the Enantiomeric Mixture Containing d-Phenylalanine on Phospholipid Vesicle Membrane

One of the congenital flaws of metabolism, phenylketonuria (PKU), is known to be related to the self-assembly of toxic fibrillar aggregates of phenylalanine (Phe) in blood at elevated concentrations. Our experimental findings using l-phenylalanine (l-Phe) at millimolar concentration suggest the formation of fibrillar morphologies in the dry phase, which in the solution phase interact strongly with the model membrane composed of 1,2-diacyl-sn-glycero-phosphocholine (LAPC) lipid, thereby decreasing the rigidity (or increasing the fluidity) of the membrane. The hydrophobic interaction, in addition to the electrostatic attraction of Phe with the model membrane, is found to be responsible for such phenomena. On the contrary, various microscopic observations reveal that such fibrillar morphologies of l-Phe are severely ruptured in the presence of its enantiomer d-phenylalanine (d-Phe), thereby converting the fibrillar morphologies into crushed flakes. Various biophysical studies, including the solvation dynamics experiment, suggest that this l-Phe in the presence of d-Phe, when interacting with the same model membrane, now reverts the rigidity of the membrane, i.e., increases the rigidity of the membrane, which was lost due to interaction with l-Phe exclusively. Fluorescence anisotropy measurements also support this reverse rigid character of the membrane in the presence of an enantiomeric mixture of amino acids. A comprehensive understanding of the interaction of Phe with the model membrane is further pursued at the single-molecular fluorescence detection level using fluorescence correlation spectroscopy (FCS) experiments. Therefore, our experimental conclusion interprets a linear correlation between increased permeability and enhanced fluidity of the membrane in the presence of l-Phe and certifies d-Phe as a therapeutic modulator of l-Phe fibrillar morphologies. Further, the study proposes that the rigidity of the membrane lost due to interaction with l-Phe was reinstated-in fact, increased-in the presence of the enantiomeric mixture containing both d- and l-Phe.

Interaction of aliphatic amino acids with zwitterionic and charged lipid membranes: hydration and dehydration phenomena

Aliphatic amino acids interact differently in order to induce gelation or fluidization in zwitterionic and charged lipid membranes as a result of hydration or dehydration of the membrane surface.

Effects of Phenylalanine on the Liquid-Expanded and Liquid-Condensed States of Phosphatidylcholine Monolayers

Background:

Phenylalanine (Phe) is involved in physiological and pathological processes in cell membranes in which expanded and condensed states coexist. In this direction, it was reported that surface hydration is important for the binding affinity of the amino acid which significantly perturbs 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) monolayer structure and morphology. A deeper insight showed that Phe inserts in DPPC monolayer defects as a monomer at pH 5 and forms aggregates that adsorb to the membrane surface generating a reconfiguration of the lipid arrangement in areas of higher packing. This new arrangement in the monolayer causes the reorientation of dipoles of lipid and water molecules which is congruent with the dehydration and surface tension changes reported above. With this background, this article studies the affinity of Phe in liquid-expanded 1,2-dimyristoyl-sn-glycero-3 phosphocholine (LE DMPC) and liquid-condensed 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (LC DPPC) monolayers and their effects on membrane properties.

Results:

The adsorption of Phe can be described by a cooperative process in non-independent sites suggesting that Phe/lipid systems reorganize to form new structures at a high degree of coverage. Compressibility modulus and Brewster angle microscopy (BAM) images allow to propose that Phe causes a new phase in 1,2-dimyristoyl-sn-glycero-3 phosphocholine (DMPC) and DPPC.

Conclusions:

Phe imposes new arrangements in the lipid phase to form new structures with different compressibility behavior than lipid binary mixtures of DMPC and DPPC. Phe interaction with the LC and LE phases gives place to a process in which a synergistic effect between non-independent sites can be produced. These features of Phe/lipid interaction would be of great importance to understand the multiple effects of Phe on cell membranes.

Self-assembly of aromatic amino acids: a molecular dynamics study

Common structures identified in the assembly of aromatic amino acids and their mixtures include the four-fold tube (a and b) and the zig-zag structure (c and d).

Interfacial photochemistry of biogenic surfactants: a major source of abiotic volatile organic compounds

Films of biogenic compounds exposed to the atmosphere are ubiquitously found on the surfaces of cloud droplets, aerosol particles, buildings, plants, soils and the ocean. These air/water interfaces host countless amphiphilic compounds concentrated there with respect to in bulk water, leading to a unique chemical environment. Here, photochemical processes at the air/water interface of biofilm-containing solutions were studied, demonstrating abiotic VOC production from authentic biogenic surfactants under ambient conditions. Using a combination of online-APCI-HRMS and PTR-ToF-MS, unsaturated and functionalized VOCs were identified and quantified, giving emission fluxes comparable to previous field and laboratory observations. Interestingly, VOC fluxes increased with the decay of microbial cells in the samples, indicating that cell lysis due to cell death was the main source for surfactants and VOC production. In particular, irradiation of samples containing solely biofilm cells without matrix components exhibited the strongest VOC production upon irradiation. In agreement with previous studies, LC-MS measurements of the liquid phase suggested the presence of fatty acids and known photosensitizers, possibly inducing the observed VOC productionviaperoxy radical chemistry. Up to now, such VOC emissions were directly accounted to high biological activity in surface waters. However, the results obtained suggest that abiotic photochemistry can lead to similar emissions into the atmosphere, especially in less biologically-active regions. Furthermore, chamber experiments suggest that oxidation (O₃/OH radicals) of the photochemically-produced VOCs leads to aerosol formation and growth, possibly affecting atmospheric chemistry and climate-related processes, such as cloud formation or the Earth’s radiation budget.