Impact of Surface Active Ionic Liquids on the Cloud Points of Nonionic Surfactants and the Formation of Aqueous Micellar Two-Phase Systems

Impact of Additive Hydrophilicity on Mixed Dye-Nonionic Surfactant Micelles: Micelle Morphology and Dye Localization

The nonionic surfactant pentaethylene glycol-monododecylether C12E5 forms micelles in aqueous solutions with a lower critical solution temperature. This characteristic solution behavior of C12E5 is independent of the pH. Such micelles are used to solubilize a large variety of active guest molecules like for instance dyestuffs. An example is an acidic azo dye termed Blue used as a hair colorant. Depending on the pH, Blue gradually changes its hydrophilicity from the protonated BlueH at pH = 2 to the bivalent anion Blue2- at pH = 13 while keeping the shape and size of Blue essentially unchanged. These features of C12E5 and Blue offer the unique chance to investigate the sole impact of a tunable hydrophilicity of a guest molecule on the solution behavior of mixed micelles of the guest and C12E5. Accordingly, the present work establishes a phase diagram of Blue-C12E5 micelles and analyzes their morphology including the spatial distribution of Blue in the micelles as a function of the hydrophilicity of Blue. Small angle neutron scattering reveals the size and shape of the micelles, and detailed contrast matching of the C12E5 supported by 1H NMR with NOESY provided insight into the localization of Blue within the micelles as its hydrophilicity changes.

Update on the status of the contamination by organotin compounds in sediment of Nuevo Gulf, Argentina. Insights from field and experimental studies

Organotin compounds are persistent pollutants and are considered chemicals of high environmental concern. In the present study, the distribution and degradation of tributyltin were evaluated in field sediments and through an ex situ experiment. For this, sediment samples from two locations were analysed: Luis Piedrabuena Harbour, with higher maritime traffic, and Cerro Avanzado, which receives less impact from anthropogenic activities. The results indicated that pollution levels at Luis Piedrabuena Harbour have decreased compared with studies performed 9 years ago for the same area. On the contrary, traces of organotin compounds have been found for the first time at Cerro Avanzado. Moreover, the butyltin degradation index indicated that organotin compounds undergo an advanced degradation process in the collected samples at both sites. Ex situ experiments revealed a limited capacity of sediments to retain tributyltin, and suggested an active role of bioturbation activity in the degradation of these compounds. In addition, visualisation using chemometric techniques (principal components analysis) allowed a simpler analysis of two sediment characteristics: the degree of contamination and the degradation levels of organotin compounds.

Innovative approaches in cloud-point extraction

Cloud-point extraction (CPE) is a pre-treatment technique for the extraction and preconcentration of different chemical compounds, such as metal ions, pesticides, drugs, phenols, vitamins etc., from various samples. CPE is based on the phenomenon of two phases (micellar and aqueous) forming after the heating of an aqueous isotropic solution of a non-ionic or zwitterionic surfactant above the cloud-point temperature. If analytes are added to the surfactant solution under suitable conditions, they should be extracted into the micellar phase, also called the surfactant-rich phase. Recently, the traditional CPE procedure is being increasingly replaced by improved CPE procedures. In this study, recent advances in CPE over the last three years (2020 - 2022), including the application of various innovative approaches, are reviewed. In addition to the basic principle of CPE, alternative extraction media in CPE, CPE supported by various auxiliary energies, a different modified CPE procedure and the use nanomaterials and solid-phase extraction in combination with CPE are presented and discussed. Finally, some future trends for improved CPE are presented.

Using coarse-grained molecular dynamics to understand the effect of ionic liquids on the aggregation of Pluronic copolymer solutions

This study is aimed to enhance the understanding of the interaction between ionic liquids (ILs) and non-ionic Pluronic triblock copolymers in aqueous two-phase micellar systems (ATPMS) used for the selective separation/purification of hydrophobic biomolecules. The ILs allow a precise control of the cloud point phase separation temperature (CPT), particularly important when the stability of the molecule is highly dependent on temperature. The effect of choline-based ILs, with two different counter-anions, chloride and hexanoate, was evaluated using molecular dynamics simulations (MD) for F-68 and L-35 Pluronic aqueous solutions. The simulations revealed the role played by the anions during the Pluronic self-assembly, with choline chloride hindering Pluronic aggregation and the choline hexanoate favouring micelle formation and coalescence, in agreement with the experimental data. A detailed study of the accessible surface area of Pluronic showed a progressive dehydration of the Pluronic hydrophilic micelle corona in choline hexanoate mixtures promoting inter-micelle interactions and, consequently, micelle coalescence. With the addition of choline hexanoate, it was observed that the hydrophilic segments, which form the micelle corona, twisted towards the Pluronic micelle core. The electrostatic interaction is also shown to play a key role in this IL-Pluronic aqueous solution, as the hexanoate anions are accommodated in the Pluronic micelle core, while the choline cations are hosted by the Pluronic micelle corona, with the ions interacting with each other during the self-assembly process. In addition, a comparison study of F-68 and L-35 aqueous solutions shows that the IL impact depends on the length of the Pluronic hydrophilic segment. This work provides a realistic microscopic scenario of the complex interactions between Pluronic copolymers and ILs.

Adsorption of P103 Nanoaggregates on Graphene Oxide Nanosheets: Role of Electrostatic Forces in Improving Nanosheet Dispersion

Graphene oxide (GO) nanosheet suspension is not stable in physiological ionic fluids. To improve stability, surfactants such as Pluronic 103 (P103) have been tested. Going further, this work investigated whether conferring positive surface charge to the surfactant may improve the adsorption ability of P103 micelles on GO sheets. Positive charge on the surfactant was induced by adding dodecyltrimethylammonium bromide (DTAB, a cationic surfactant) in P103 micelles. Subsequent changes in aggregation parameters were investigated through dynamic light scattering and small-angle neutron scattering studies. DTAB incorporation was accompanied by a steady increase in the ζ potential and mixed micelle formation. At high surface charge density, the interaction between adjacent head groups was distorted, which led to dissociation of mixed micelles. Structural developments during the adsorption of mixed micelles on the sheet surface (mass fractal formation) were monitored in terms of changes in the scattering features of aggregates. These fractals emerged as a result of electrostatic interactions. Our observations point toward the existence of small-sized building blocks at low DTAB concentration (≤4 mM). With a superior adsorption, mixed micelles are expected to occupy the intersheet space and maintain a hydration layer. However, at a higher DTAB concentration (≥10 mM), micelles dissociate to produce DTAB-rich unimers and P103-rich loose aggregates. At this point, sheets tend to aggregate in the solvent, regardless of fractal formation.

Polymeric micelles using cholinium-based ionic liquids for the encapsulation and release of hydrophobic drug molecules

We generated stable amphiphilic copolymer-based polymeric micelles (PMs) with temperature-responsive properties utilizing Pluronic® L35 and a variety of ionic liquids (ILs) for the encapsulation and release of curcumin.

Development of a Microfluidic Platform for R-Phycoerythrin Purification Using an Aqueous Micellar Two-Phase System

Temperature-dependent aqueous micellar two-phase systems (AMTPSs) have recently been gaining attention in the isolation of high-added-value biomolecules from their natural sources. Despite their sustainability, aqueous two-phase systems, and particularly AMTPSs, have not been extensively applied in the industry, which might be changed by applying process integration and continuous manufacturing. Here, we report for the first time on an integrated microfluidic platform for fast and low-material-consuming development of continuous protein purification using an AMTPS. A system comprised of a microchannel incubated at high temperature, enabling instantaneous triggering of a two-phase system formation, and a microsettler, allowing complete phase separation at the outlets, is reported here. The separation of phycobiliproteins and particularly the purification of R-phycoerythrin from the contaminant proteins present in the aqueous crude extract obtained from fresh cells of Gracilaria gracilis were thereby achieved. The results from the developed microfluidic system revealed that the fractionation performance was maintained while reducing the processing time more than 20-fold when compared with the conventional lab-scale batch process. Furthermore, the integration of a miniaturized ultrafiltration module resulted in the complete removal of the surfactant from the bottom phase containing R-phycoerythrin, as well as in nearly twofold target protein concentration. The process setup successfully exploits the benefits of process intensification along with the integration of various downstream processes. Further transfer to a meso-scale integrated system would make such a system appropriate for the separation and purification of biomolecules with high commercial interest.

The solvent side of proteinaceous membrane-less organelles in light of aqueous two-phase systems

Water represents a common denominator for liquid-liquid phase transitions leading to the formation of the polymer-based aqueous two-phase systems (ATPSs) and a set of the proteinaceous membrane-less organelles (PMLOs). ATPSs have a broad range of biotechnological applications, whereas PMLOs play a number of crucial roles in cellular compartmentalization and often represent a cellular response to the stress. Since ATPSs and PMLOs contain high concentrations of polymers (such as polyethylene glycol (PEG), polypropylene glycol (PPG), Ucon, and polyvinylpyrrolidone (PVP), Dextran, or Ficoll) or biopolymers (peptides, proteins and nucleic acids), it is expected that the separated phases of these systems are characterized by the noticeable changes in the solvent properties of water. These changes in solvent properties can drive partitioning of various compounds (proteins, nucleic acids, organic low-molecular weight molecules, metal ions, etc.) between the phases of ATPSs or between the PMLOs and their surroundings. Although there is a sizable literature on the properties of the ATPS phases, much less is currently known about PMLOs. In this perspective article, we first represent liquid-liquid phase transitions in water, discuss different types of biphasic (or multiphasic) systems in water, and introduce various PMLOs and some of their properties. Then, some basic characteristics of polymer-based ATPSs are presented, with the major focus being on the current understanding of various properties of ATPS phases and solvent properties of water inside them. Finally, similarities and differences between the polymer-based ATPSs and biological PMLOs are discussed.

In Aqua Veritas: The Indispensable yet Mostly Ignored Role of Water in Phase Separation and Membrane-less Organelles

Despite the common practice of presenting structures of biological molecules on an empty background and the assumption that interactions between biological macromolecules take place within the inert solvent, water represents an active component of various biological processes. This Perspective addresses indispensable, yet mostly ignored, roles of water in biological liquid-liquid phase transitions and in the biogenesis of various proteinaceous membrane-less organelles. We point out that changes in the structure of water reflected in the changes in its abilities to donate and/or accept hydrogen bonds and participate in dipole-dipole and dipole-induced dipole interactions in the presence of various solutes (ranging from small molecules to synthetic polymers and biological macromolecules) might represent a driving force for the liquid-liquid phase separation, define partitioning of various solutes in formed phases, and define the exceptional ability of intrinsically disordered proteins to be engaged in the formation of proteinaceous membrane-less organelles.