Transmission Mode 2D-IR Spectroelectrochemistry of In Situ Electrocatalytic Intermediates

FullThrOTTLE-TrIR: Time-Resolved IR Spectroscopy of Electrochemically Generated Species Using a Full Throughput Optically Transparent Thin-Layer Electrochemical Cell

An optically transparent thin-layer electrochemical cell with stopped-flow sample transport has been developed for optical-pump infrared-probe transient absorption spectroscopy of prereduced or preoxidized molecules. Time-resolved IR-spectra of Re(bpy)(CO)3X (X = Cl, Br) complexes in different oxidation states are presented as a proof-of-principle application for this combined electrochemical and spectroscopic tool. The excited-state lifetimes and IR-spectroscopic signatures of various oxidation states of the molecule, including follow-up reaction intermediates, are disentangled by kinetic sorting, using lifetime density analysis. The method can be applied to assign and differentiate molecular intermediates in photo- and electrochemical reactions, adding new analytic coordinates to classical FTIR- and UV-vis-spectroelectrochemistry.

Nanoclustering in non-ideal ethanol/heptane solutions alters solvation dynamics

Alcohol/alkane solutions widely used in chemical synthesis and as transportation fuels are highly non-ideal due to the nanoscale clustering of the amphiphilic alcohol molecules within the nonpolar alkanes. Besides impacting reactivity, such as combustion, non-ideal solutions are likely to exhibit unusual solvation dynamics on ultrafast time scales arising from the structurally heterogeneous nature of molecular-scale association. Using a convenient transition metal carbonyl vibrational probe [(C5H5)Mn(CO)3, CMT], linear absorption and nonlinear two-dimensional infrared (2D-IR) spectroscopy reveal composition-dependent solvation dynamics as reported by the frequency fluctuation correlation function in a series of ethanol/heptane solutions. Slow spectral diffusion with dilute ethanol indicates preferential solvation of the polar solute by the alcohol with a mechanism largely dominated by solvent exchange. Comparison with an ethanol/acetonitrile solution series yields no substantial preferential solvation or solvent exchange signatures in the linear or 2D-IR spectra. In ethanol/heptane solutions, increasing the ethanol concentration speeds up the solvation dynamics, which is largely consistent with a model that includes solvent exchange and single-solvent spectral diffusion. Detailed analysis of the deviation from the experimental time constants from the model's optimal parameters yields a remarkable resemblance of the concentration-weighted Kirkwood-Buff integrals for ethanol/heptane solutions. This trend indicates that solution non-ideality alters the spectral diffusion dynamics of the probe solute. Given that nanoscale clustering drives the non-ideality, these experiments reveal a dynamical consequence of nanoscale heterogeneity on the ultrafast dynamics of the solution. Refined understanding of the structural and dynamical aspects of mixed solvents will be necessary for predictive solution strategies in chemistry.

Dynamics of reduced perylene bisimide cyclophane redox species by ultrafast spectroelectrochemistry

Charged molecules play essential roles in many natural and artificial functional processes, ranging from photosynthesis to photovoltaics to chemical reactions and more. It is often difficult to identify the optical dynamic properties of relevant redox species because they cannot be easily prepared, their spectra overlap, or they evolve on a femtosecond timescale. Here, we address these challenges by combining spectroelectrochemistry, ultrafast transient absorption spectroscopy, and suitable data analysis. We illustrate the method with the various redox species of a cyclophane composed of two perylene bisimide subunits. While singular-value decomposition is a well-established tool in the analysis of time-dependent spectra of a single molecular species, we here use it additionally to separate transient maps of individual redox species. This is relevant because at any specific applied electrochemical potential, several redox species coexist in the ensemble, and our procedure allows disentangling their spectroscopic response. In the second step, global analysis is then employed to retrieve the excited-state lifetimes and decay-associated difference spectra. Our approach is generally suitable for unraveling ultrafast dynamics in materials featuring charge-transfer processes.

Time-resolved in situ vibrational spectroscopy for electrocatalysis: challenge and opportunity

Understanding the structure-activity relationship of catalysts and the reaction pathway is crucial for designing efficient, selective, and stable electrocatalytic systems. In situ vibrational spectroscopy provides a unique tool for decoding molecular-level factors involved in electrocatalytic reactions. Typically, spectra are recorded when the system reaches steady states under set potentials, known as steady-state measurements, providing static pictures of electrode properties at specific potentials. However, transient information that is crucial for understanding the dynamic of electrocatalytic reactions remains elusive. Thus, time-resolved in situ vibrational spectroscopies are developed. This mini review summarizes time-resolved in situ infrared and Raman techniques and discusses their application in electrocatalytic research. With different time resolutions, these time-resolved techniques can capture unique dynamic processes of electrocatalytic reactions, short-lived intermediates, and the surface structure revolution that would be missed in steady-state measurements alone. Therefore, they are essential for understanding complex reaction mechanisms and can help unravel important molecular-level information hidden in steady states. Additionally, improving spectral time resolution, exploring low/ultralow frequency detection, and developing operando time-resolved devices are proposed as areas for advancing time-resolved techniques and their further applications in electrocatalytic research.

Versatile Femtosecond Laser Synchronization for Multiple-Timescale Transient Infrared Spectroscopy

Several ways to electronically synchronize different types of amplified femtosecond laser systems are presented based on a single freely programmable electronics hardware: arbitrary-detuning asynchronous optical sampling (ADASOPS), as well as actively locking two femtosecond laser oscillators, albeit not necessarily to the same round-trip frequency. They allow us to rapidly probe a very wide range of timescales, from picoseconds to potentially seconds, in a single transient absorption experiment without the need to move any delay stage. Experiments become possible that address a largely unexplored aspect of many photochemical reactions, in particular in the context of photo-catalysis as well as photoactive proteins, where an initial femtosecond trigger very often initiates a long-lasting cascade of follow-up processes. The approach is very versatile and allows us to synchronize very different lasers, such as a Ti:Sa amplifier and a 100 kHz Yb-laser system. The jitter of the synchronization, and therewith the time-resolution in the transient experiment, lies in the range from 1 to 3 ps, depending on the method. For illustration, transient IR measurements of the excited state solvation and decay of a metal carbonyl complex as well as the full reaction cycle of bacteriorhodopsin are shown. The pros and cons of the various methods are discussed, with regard to the scientific question one might want to address, and also with regard to the laser systems that might be already existent in a laser lab.

Solubilizing Metal-Organic Frameworks for an In Situ IR-SEC Study of a CO2 Reduction Catalyst

Metal-organic frameworks (MOFs) are typically assembled by bridging metal centers with organic linkers for various applications, including providing robust support for heterogeneous catalysts for CO2 reduction. In this study, we have demonstrated the solubilization of a MOF tethered to a CO2-reducing electrocatalyst and studied its fundamental electrochemistry in THF solvent using infrared spectroelectrochemistry (IR-SEC). The fundamental electrochemical properties of this immobilized catalyst were compared to that of its homogeneous counterpart. This approach provides a foundation for future experimental studies to bridge the gap between homogeneous and heterogeneous electrocatalysis.

Ruthenium hydrides encapsulated in sol–gel glasses exhibit new ultrafast vibrational dynamics

Vibrational dynamics were measured by IR pump–probe spectroscopy and two-dimensional IR spectroscopy for triruthenium dodecacarbonyl and the undecacarbonyl hydride that forms when it is encapsulated in an alumina sol–gel glass. For comparison, a triruthenium undecacarbonyl hydride salt was also synthesized and studied in neat solution to identify the potential influence of the confined solvent environment on the dynamics experienced by carbon monoxide ligands. The vibrational lifetime was found to be significantly decreased for both hydride species relative to the dodecacarbonyl compound. Conversely, spectral diffusion of the CO vibrations was measured to be faster for the parent compound. The most significant dynamic changes occurred upon transformation from the starting compound to the hydride, while only minor differences were observed between the dynamics of the freely dissolved and sol–gel encapsulated hydrides. The results suggest that the structural change to the hydride has the largest impact on the dynamics and that its improved catalytic properties likely do not originate from confined solvent effects.

Ultrafast transient absorption spectroelectrochemistry: femtosecond to nanosecond excited-state relaxation dynamics of the individual components of an anthraquinone redox couple

Many photoactivated processes involve a change in oxidation state during the reaction pathway and formation of highly reactive photoactivated species. Isolating these reactive species and studying their early-stage femtosecond to nanosecond (fs-ns) photodynamics can be challenging. Here we introduce a combined ultrafast transient absorption-spectroelectrochemistry (TA-SEC) approach using freestanding boron doped diamond (BDD) mesh electrodes, which also extends the time domain of conventional spectrochemical measurements. The BDD electrodes offer a wide solvent window, low background currents, and a tuneable mesh size which minimises light scattering from the electrode itself. Importantly, reactive intermediates are generated electrochemically, via oxidation/reduction of the starting stable species, enabling their dynamic interrogation using ultrafast TA-SEC, through which the early stages of the photoinduced relaxation mechanisms are elucidated. As a model system, we investigate the ultrafast spectroscopy of both anthraquinone-2-sulfonate (AQS) and its less stable counterpart, anthrahydroquinone-2-sulfonate (AH2QS). This is achieved by generating AH2QS in situ from AQS via electrochemical means, whilst simultaneously probing the associated early-stage photoinduced dynamical processes. Using this approach we unravel the relaxation mechanisms occurring in the first 2.5 ns, following absorption of ultraviolet radiation; for AQS as an extension to previous studies, and for the first time for AH2QS. AQS relaxation occurs via formation of triplet states, with some of these states interacting with the buffered solution to form a transient species within approximately 600 ps. In contrast, all AH2QS undergoes excited-state single proton transfer with the buffered solution, resulting in formation of ground state AHQS- within approximately 150 ps.

In Situ Spectroelectrochemical-Conductance Measurements as an Efficient Tool for the Evaluation of Charge Trapping in Conducting Polymers

In situ UV-vis-NIR spectroelectrochemistry has been intensively used to evaluate the electronic transitions during the charging/discharging process of π-conjugated polymers. However, the type of charge carrier and the mechanisms of their transport, remains still a point of discussion. Herein, the coupling between UV-vis-NIR spectroscopy and in situ electrochemical-conductance measurements is proposed to compare the doping process of three different thiophene-based conducting polymers. The simultaneous monitoring of electrical and absorption properties, associated with low energy electronic transitions characteristic for polarons and bipolarons, was achieved. In addition, this method allows evaluating the reversible charge trapping mechanism of poly-3,4-o-xylendioxythiophene (PXDOT), caused by the formation of σ-dimers, making it a very useful tool to determine relevant physicochemical properties of conductive materials.