Role of Disorder in the Extent of Interchain Delocalization and Polaron Generation in Polythiophene Crystalline Domains

Polaron Pair-Mediated Radiative Recombination of Singlet Excitons in a Conjugated Polymer Aggregate by Plasmonic and Semiconductor Nanocrystals

We investigated the excited-state dynamics of a conjugated polymer (CP:P3HT)-based ternary hybrid system containing P3HT-coated gold nanoparticles and quantum dots. Transient absorption spectroscopy results revealed that polaron pairs (PPs) originating from nonrelaxed singlet (S1) excitons of the CP aggregate in the ternary system have shorter electron-hole separation distances than those of PPs in the neat CP aggregate because of the photophysical effects of plasmonic and semiconductor nanocrystals. In particular, the shorter electron-hole distances of PPs led to more back-recombination to S1 excitons than dissociation into positive polarons in the ternary system, resulting in increased S1 radiative recombination compared with that in the neat CP system. Thus, the photoluminescence intensity of the CP aggregate in the ternary system increased. Our findings provide new insights into the excited-state dynamics of CPs and pave the way for the development of next-generation high-efficiency optoelectronic devices.

Excitation-Wavelength-Dependent Photophysics of a Torsionally Disordered Push-Pull Dye

The torsional disorder of conjugated dyes in the electronic ground state can lead to inhomogeneous broadening of the S1 ←S0 absorption band, allowing for the selective photoexcitation of molecules with different amounts of distortion. Here, we investigate how this affects electronic transitions to upper excited states. We show that torsion of a core-alkynylated push-pull dye can have opposite effects on the oscillator strength of its lowest-energy transitions. Consequently, photoselection of planar and twisted molecules can be achieved by exciting in distinct absorption bands. Whereas this has limited effect in liquids due to fast planarization of the excited molecules, it strongly affects the overall photophysics in a polymeric environment, where torsional motion is hindered, allowing for the photoselection of molecules with different fluorescence quantum yields and intersystem-crossing dynamics.

A skeletal randomization strategy for high-performance quinoidal-aromatic polymers

Enhancing the solution-processability of conjugated polymers (CPs) without diminishing their thin-film crystallinity is crucial for optimizing charge transport in organic field-effect transistors (OFETs). However, this presents a classic "Goldilocks zone" dilemma, as conventional solubility-tuning methods for CPs typically yield an inverse correlation between solubility and crystallinity. To address this fundamental issue, a straightforward skeletal randomization strategy is implemented to construct a quinoid-donor conjugated polymer, PA4T-Ra, that contains para-azaquinodimethane (p-AQM) and oligothiophenes as repeat units. A systematic study is conducted to contrast its properties against polymer homologues constructed following conventional solubility-tuning strategies. An unusually concurrent improvement of solubility and crystallinity is realized in the random polymer PA4T-Ra, which shows moderate polymer chain aggregation, the highest crystallinity and the least lattice disorder. Consequently, PA4T-Ra-based OFETs, fabricated under ambient air conditions, deliver an excellent hole mobility of 3.11 cm2 V-1 s-1, which is about 30 times higher than that of the other homologues and ranks among the highest for quinoidal CPs. These findings debunk the prevalent assumption that a random polymer backbone sequence results in decreased crystallinity. The considerable advantages of the skeletal randomization strategy illuminate new possibilities for the control of polymer aggregation and future design of high-performance CPs, potentially accelerating the development and commercialization of organic electronics.

Interplay between Side Chain Density and Polymer Alignment: Two Competing Strategies for Enhancing the Thermoelectric Performance of P3HT Analogues

A series of polythiophenes with varying side chain density was synthesized, and their electrical and thermoelectric properties were investigated. Aligned and non-aligned thin films of the polymers were characterized in the neutral and chemically doped states. Optical and diffraction measurements revealed an overall lower order in the thin films with lower side chain density, also confirmed using polarized optical experiments on aligned thin films. However, upon doping the non-aligned films, a sixfold increase in electrical conductivity was observed for the polythiophene with the lowest side chain density compared to poly(3-hexylthiophene) (P3HT). We found that the improvement in conductivity was not due to a larger charge carrier density but an increase in charge carrier mobility after doping with 2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane (F4TCNQ). On the other hand, doped aligned films did not show the same trend; lower side chain density instead led to a lower conductivity and Seebeck coefficient compared to those for P3HT. This was attributed to the poorer alignment of the polymer thin films with lower side chain density. The study demonstrates that optimizing side chain density is a synthetically simple and effective way to improve electrical conductivity in polythiophene films relevant to thermoelectric applications.

Manipulation of Charge Delocalization in a Bulk Heterojunction Material Using a Mid-Infrared Push Pulse

In organic bulk heterojunction materials, charge delocalization has been proposed to play a vital role in the generation of free carriers by effectively reducing the Coulomb attraction via an interfacial charge transfer exciton (CTX). Pump-push-probe (PPP) experiments produced evidence that the excess energy given by a push pulse enhances delocalization, thereby increasing photocurrent. However, previous studies have employed near-infrared push pulses in the range ∼0.4-0.6 eV, which is larger than the binding energy of a typical CTX. This raises the doubt that the push pulse may directly promote dissociation without involving delocalized states. Here, we perform PPP experiments with mid-infrared push pulses at energies that are well below the binding energy of a CTX state (0.12-0.25 eV). We identify three types of CTXs: delocalized, localized, and trapped. The excitation resides over multiple polymer chains in delocalized CTXs, while it is restricted to a single chain (albeit maintaining a degree of intrachain delocalization) in localized CTXs. Trapped CTXs are instead completely localized. The pump pulse generates a "hot" delocalized CTX, which promptly relaxes to a localized CTX and eventually to trapped states. We find that photo-exciting localized CTXs with push pulses resonant to the mid-infrared charge transfer absorption can promote delocalization and, in turn, contribute to the formation of long-lived charge separated states. On the other hand, we found that trapped CTXs are non-responsive to the push pulses. We hypothesize that delocalized states identified in prior studies are only accessible in systems where there is significant interchain electronic coupling or regioregularity that supports either inter- or intrachain polaron delocalization. This, in turn, emphasizes the importance of engineering the micromorphology and energetics of the donor-acceptor interface to exploit the full potential of a material for photovoltaic applications.

Solution-processable polymers of intrinsic microporosity for gas-phase carbon dioxide photoreduction

Four solution-processable, linear conjugated polymers of intrinsic porosity are synthesised and tested for gas phase carbon dioxide photoreduction. The polymers' photoreduction efficiency is investigated as a function of their porosity, optical properties, energy levels and photoluminescence. All polymers successfully form carbon monoxide as the main product, without the addition of metal co-catalysts. The best performing single component polymer yields a rate of 66 μmol h^-1 m^-2, which we attribute to the polymer exhibiting macroporosity and the longest exciton lifetimes. The addition of copper iodide, as a source of a copper co-catalyst in the polymers shows an increase in rate, with the best performing polymer achieving a rate of 175 μmol h^-1 m^-2. The polymers are active for over 100 h under operating conditions. This work shows the potential of processable polymers of intrinsic porosity for use in the gas phase photoreduction of carbon dioxide towards solar fuels.

Graphene Oxide: Key to Efficient Charge Extraction and Suppression of Polaronic Transport in Hybrids with Poly (3-hexylthiophene) Nanoparticles

Nanoparticles (NPs) of conjugated polymers in intimate contact with sheets of graphene oxide (GO) constitute a promising class of water-dispersible nanohybrid materials of increased interest for the design of sustainable and improved optoelectronic thin-film devices, revealing properties exclusively pre-established upon their liquid-phase synthesis. In this context, we report for the first time the preparation of a P3HTNPs-GO nanohybrid employing a miniemulsion synthesis approach, whereby GO sheets dispersed in the aqueous phase serve as a surfactant. We show that this process uniquely favors a quinoid-like conformation of the P3HT chains of the resulting NPs well located onto individual GO sheets. The accompanied change in the electronic behavior of these P3HTNPs, consistently confirmed by the photoluminescence and Raman response of the hybrid in the liquid and solid states, respectively, as well as by the properties of the surface potential of isolated individual P3HTNPs-GO nano-objects, facilitates unprecedented charge transfer interactions between the two constituents. While the electrochemical performance of nanohybrid films is featured by fast charge transfer processes, compared to those taking place in pure P3HTNPs films, the loss of electrochromic effects in P3HTNPs-GO films additionally indicates the unusual suppression of polaronic charge transport processes typically encountered in P3HT. Thus, the established interface interactions in the P3HTNPs-GO hybrid enable a direct and highly efficient charge extraction channel via GO sheets. These findings are of relevance for the sustainable design of novel high-performance optoelectronic device structures based on water-dispersible conjugated polymer nanoparticles.

Tailoring optical properties and stimulated emission in nanostructured polythiophene

Polythiophenes are the most widely utilized semiconducting polymers in organic electronics, but they are scarcely exploited in photonics due to their high photo-induced absorption caused by interchain polaron pairs, which prevents the establishment of a window of net optical gain. Here we study the photophysics of poly(3-hexylthiophene) configured with different degrees of supramolecular ordering, spin-coated thin films and templated nanowires, and find marked differences in their optical properties. Transient absorption measurements evidence a partially-polarized stimulated emission band in the nanowire samples, in contrast with the photo-induced absorption band observed in spin-coated thin films. In combination with theoretical modeling, our experimental results reveal the origin of the primary photoexcitations dominating the dynamics for different supramolecular ordering, with singlet excitons in the nanostructured samples superseding the presence of polaron pairs, which are present in the disordered films. Our approach demonstrates a viable strategy to direct optical properties through structural control, and the observation of optical gain opens the possibility to the use of polythiophene nanostructures as building blocks of organic optical amplifiers and active photonic devices.