Elastic-Modulus-Dependent Macroscopic Supramolecular Assembly of Poly(dimethylsiloxane) for Understanding Fast Interfacial Adhesion

Additive-assisted macroscopic self-assembly and control of the shape of assemblies based on host-guest interaction

In these decades, considerable attention has focused on supramolecular polymers due to their unique structures and properties. More recently, macroscopic supramolecular polymers have attracted increasing interest from not only biologists but also materials scientists inspired by the sophisticated structures and functions of living organisms. Since the functions of supramolecular polymers are strongly dependent on their shape, control of the shape is an important issue in controlling the functions of supramolecular polymers. However, the control of shape in macroscopic supramolecular assemblies has not yet been sufficiently investigated. Previously, we studied the macroscopic self-assembly behavior of super absorbent polymer (SAP) microparticles modified with β-cyclodextrin (βCD) and adamantane (Ad) residues (βCD(x)-SAP and Ad(y)-SAP microparticles, where x and y are the mol% contents of βCD and Ad residues, respectively). More elongated assemblies were formed at higher y, indicating that the shape of assemblies can be controlled by varying the interaction strength. The noteworthy is that 1-adamantanamine hydrochloride (AdNH3Cl) assisted the formation of assemblies from βCD(x)-SAP and Ad(y)-SAP microparticles, indicating that AdNH3Cl acts as a chemical stimulus for macroscopic assemblies of βCD(x)-SAP and Ad(y)-SAP microparticles. In this study, we have thus studied the assembling behavior of βCD(x)-SAP microparticles with Ad(y)-SAP microparticles and unmodified SAP microparticles assisted by AdNH3Cl, as well as the shape of the resulting macroscopic assemblies. AdNH3Cl assisted the formation of assemblies from βCD(16.2)-SAP and Ad(15.1)-SAP microparticles, in which AdNH3Cl crosslinked the SAP microparticles through the formation of inclusion complexes of βCD residues with the Ad residue and the electrostatic interaction of ammonium and carboxylate residues. Assemblies of βCD(26.7)-SAP and unmodified SAP microparticles were formed at the concentrations of AdNH3Cl ([AdNH3Cl]0) higher than a certain level (ca. 0.05 mM). The aspect ratio (a/b) of assemblies showed a maximum at [AdNH3Cl]0 ~ 0.10 mM, indicating that the chemical stimulus, i.e., addition of AdNH3Cl, controls the shape of assemblies formed from βCD(26.7)-SAP and unmodified SAP microparticles. This study suggests that other stimuli, e.g., heat, pH, light, redox, and force, can be utilized to control the shape of macroscopic assemblies based on supramolecular interactions.

Synergistic Self-Healing Enhancement in Multifunctional Silicone Elastomers and Their Application in Smart Materials

Organosilicon polymers (silicones) are of enduring interest both as an established branch of polymer chemistry and as a segment of commercial products. Their unique properties were exploited in a wide range of everyday applications. However, current silicone trends in chemistry and materials engineering are focused on new smart applications, including stretchable electronics, wearable stress sensors, protective coatings, and soft robotics. Such applications require a fresh approach to methods for increasing the durability and mechanical strength of polysiloxanes, including crosslinked systems. The introduction of self-healing options to silicones has been recognized as a promising alternative in this field, but only carefully designed multifunctional systems operating with several different self-healing mechanisms can truly address the demands placed on such valuable materials. In this review, we summarized the progress of research efforts dedicated to the synthesis and applications of self-healing hybrid materials through multi-component systems that enable the design of functional silicon-based polymers for smart applications.

Robust Electrostatically Interactive Hydrogel Coatings for Macroscopic Supramolecular Assembly via Rapid Wet Adhesion

A macroscopic supramolecular assembly (MSA) refers to non-covalent interactions between building blocks over a micrometer scale, which provides insights into bio-/wet adhesion, self-healing, and so on and new fabrication strategies to heterogeneous structures and bio-scaffolds. The key to realize the MSA of rigid materials is pre-modifying a compliant coating known as a "flexible spacing coating" beneath the interactive moieties. However, available coatings are limited to polyelectrolyte multilayers with shortcomings of tedious fabrication, weak adhesion to substrates, susceptibility to external reagents, and so on. Here, we develop a facile method to induce a new "flexible spacing coating" of a poly(2-hydroxyethyl methacrylate) (PHEMA) hydrogel with electrostatic interactions to achieve MSA of diverse rigid materials (quartz, metal, rubber, and plastics). Selective self-assembly of positive-negative charged surfaces is observed by the naked eye under 3 min of shaking in water, providing strategies to rapid wet adhesion. The interfacial binding force between positive-negative interacted surfaces is 1018.1 ± 299.2 N/m², which is over two magnitudes larger than that of control groups, that is, positive-positive (24.4 ± 10.0 N/m²) and negative-negative (67.5 ± 16.7 N/m²) interacted surfaces. In situ force measurements and control experiments of identically charged building blocks have strongly supported the improved binding strength and chemical selectivity between interactive building blocks. The coating is advantageous with a simple fabrication, strong adhesion to materials, robust solvent tolerance to assembly solutions, and feasibility of photo-patterning. We envision that the above strategy would broaden the material choices of flexible spacing coatings for efficient MSA and new methods for rapid interfacial adhesion.

Self-sorting in macroscopic supramolecular self-assembly via additive effects of capillary and magnetic forces

Supramolecular self-assembly of μm-to-mm sized components is essential to construct complex supramolecular systems. However, the selective assembly to form designated structures at this length scale is challenging because the short-ranged molecular recognition could hardly direct the assembly of macroscopic components. Here we demonstrate a self-sorting mechanism to automatically identify the surface chemistry of μm-to-mm components (A: polycations; B: polyanions) based on the A-B attraction and the A-A repulsion, which is realized by the additivity and the competence between long-ranged magnetic/capillary forces, respectively. Mechanistic studies of the correlation between the magnetic/capillary forces and the interactive distance have revealed the energy landscape of each assembly pattern to support the self-sorting results. By applying this mechanism, the assembly yield of ABA trimers has been increased from 30%~40% under conventional conditions to 100% with self-sorting. Moreover, we have demonstrated rapid and spontaneous self-assembly of advanced chain-like structures with alternate surface chemistry.

Sunlight Recovering the Superhydrophobicity of a Femtosecond Laser-Structured Shape-Memory Polymer

Superhydrophobic surfaces have aroused increasing attentions in the fields of self-cleaning, anti-fouling, heat transfer, etc. However, one of the major problems of the artificial superhydrophobic surface in practical applications is the poor durability. Inspired by the self-healing property of nature organism, we developed a sunlight-driven recoverable superhydrophobic surface by femtosecond laser constructing micropillar array on the surface of the photo-responsive shape-memory polymer (SMP). The photo-responsive SMP composite was prepared by adding reduced graphene oxide (RGO) into thermal-responsive SMP matrix. Due to the excellent sunlight-to-heat transformation property of RGO, the temperature of the as-fabricated RGO-SMP composite could be rapidly increased above the shape transformation temperature of the RGO-SMP under one sunlight irradiation. Once the micropillar array of the RGO-SMP composite was deformed by pressing or stretching treatments, the surface would lose superhydrophobicity. Upon sunlight irradiation, the surface morphology and the wettability of the RGO-SMP micropillars could completely recover to the original states. Meanwhile, this reversible morphology and wettability transformation process could be repeated multiple times. We envision that such a sunlight-recoverable superhydrophobic surface will have great applications in the future.

Supramolecular Polymerization at Interfaces

Supramolecular polymers, originating from the interplay between polymer science and supramolecular chemistry, have attracted increasing interest in the scientific and industrial communities. To date, most supramolecular polymers are constructed in homogeneous solutions. Supramolecular polymerization normally takes place spontaneously in solutions, thus creating challenges in fabricating supramolecular polymers in a controlled manner. By combining supramolecular polymerization and interfacial polymerization, supramolecular polymerization can be transferred from homogeneous solutions to interfaces, which allows for the controlled production of supramolecular polymers. In this Perspective, we will summarize recent progress and the advantages in supramolecular polymerization at solid-liquid and liquid-liquid interfaces. Meanwhile, current challenges and opportunities in the field of supramolecular polymerization at interfaces are proposed and discussed. It is anticipated that this Perspective will inspire supramolecular polymerization at interfaces and facilitate the construction of supramolecular polymeric materials with diverse architectures and tailor-made functions.

One-Step Fabrication of a Functionally Integrated Device Based on Polydimethylsiloxane-Coated SiO2 NPs for Efficient and Continuous Oil Absorption

The construction of superhydrophobic surfaces necessitates the rational design of topographic surface structure and the reduction of surface energy. To date, the reported strategies are usually complex with multi-steps and costly. Thus, the simultaneous achievement of the two indispensable factors is highly desired, yet rather challenging. Herein, we develop a novel structure engineering strategy of realizing the fabrication of a functionally integrated device (FID) with a superhydrophobic surface via a one-step spraying method. Specifically, silica nanoparticles are used to control the surface roughness of the device, while polydimethylsiloxane is employed as the hydrophobic coating. Benefitting from the adopted superhydrophobicity, the as-fabricated FID exhibits a continuous, excellent oil-water separating performance (e.g., 92.5% separating efficiency) when coupled with a peristaltic pump. Notably, a smart design of incorporating a gas switch is adopted in this device, thereby effectively preventing water from entering the FID, realizing thorough oil collection, and avoiding secondary pollution. This work opens up an avenue for the design and development of the FID, accessible for rapid preparation and large-scale practical application.