Bio-inspired Incrustation Interfacial Polymerization of Dopamine and Cross-linking with Gelatin toward Robust, Biodegradable Three-Dimensional Hydrogels

Fabrication of Two-Layer Microfluidic Devices with Porous Electrodes Using Printed Sacrificial Layers

Two-layer microfluidic devices with porous membranes have been widely used in bioapplications such as microphysiological systems (MPS). Porous electrodes, instead of membranes, have recently been incorporated into devices for electrochemical cell analysis. Generally, microfluidic channels are prepared using soft lithography and assembled into two-layer microfluidic devices. In addition to soft lithography, three-dimensional (3D) printing has been widely used for the direct fabrication of microfluidic devices because of its high flexibility. However, this technique has not yet been applied to the fabrication of two-layer microfluidic devices with porous electrodes. This paper proposes a novel fabrication process for this type of device. In brief, Pluronic F-127 ink was three-dimensionally printed in the form of sacrificial layers. A porous Au electrode, fabricated by sputtering Au on track-etched polyethylene terephthalate membranes, was placed between the top and bottom sacrificial layers. After covering with polydimethylsiloxane, the sacrificial layers were removed by flushing with a cold solution. To the best of our knowledge, this is the first report on the sacrificial approach-based fabrication of two-layer microfluidic devices with a porous electrode. Furthermore, the device was used for electrochemical assays of serotonin and could successfully measure concentrations up to 5 µM. In the future, this device can be used for MPS applications.

Self-Oxidated Hydrophilic Chitosan Fibrous Mats for Fatal Hemorrhage Control

Enriching erythrocytes and platelets in seconds and providing a fast seal in bleeding sites is vital to fatal hemorrhage control. Herein, hydrophilic chitosan fibrous mats (CECS-D mats) are fabricated by introducing hydrophilic carboxyethyl groups and subsequent catechol groups onto chitosan fibers. Due to strong hydrophilicity, CECS-D mats exhibit rapid liquid-absorption capacity, especially instantaneous absorptivity to the rabbit blood, which can achieve erythrocyte and platelet aggregations quickly by concentrating blood, thus promoting the formation of blood clots. Furthermore, the mats are self-oxidated to form quinone-amine adducts or quinone multimers by adjusting pH conditions, which not only provides tissue adhesion but also induces erythrocyte aggregation and platelet adhesion, further enhancing the seal and triggering quick closure to achieve fast hemostasis. Therefore, the mats reveal superior hemostatic performance in rabbit liver and spleen models over CECS mats and gauze. Especially in the fatal femoral artery injury model of rabbits, the mats reduce the blood loss by ∼75% and shortened the bleeding time by ∼50% compared with CECS mats, which have been reported to have the same hemostatic effect as commercialized Celox products in a swine femoral artery injury model. Besides, the mats are cytocompatible and degradable as well as antibacterial. This chitosan mat is a promising hemostatic material for fatal hemorrhage control.

Cationic Gelatin Cross-Linked with Transglutaminase and Its Electrospinning in Aqueous Solution

Gelatin (GE) is a renewable biopolymer with abundant active groups that are beneficial for manufacturing functional biomaterials via GE modification. An antibacterial fibrous GE film was prepared by electrospinning the modified GE in an aqueous solution. The original GE was modified by reacting it with N,N-dimethyl epoxypropyl octadecyl ammonium chloride (QAS), and then it was cross-linked with transglutaminase (TGase). FTIR analysis illustrated that QAS was grafted onto GE through the epoxy ring-opening reaction, and the modification did not influence the main GE skeleton structure. The investigation of the solution properties showed that the grafted cationic QAS group was the main factor that decreased the surface tension of the solution, increased the electrical conductivity of the solution, and endowed GE with antibacterial activity. TGase cross-linking clearly influenced the rheological properties such that the flow pattern of the spinning solution varied from Newton-type to shear thinning, and the aqueous solution of GE-QAS-TGs transformed from liquid-like to solid-like and even induced gelatinization with increasing TGase content. A satisfactory fibrous morphology of 200-500 nm diameter was obtained using a homemade instrument under the optimized electrospinning conditions of a temperature of 35 °C, a distance between electrodes of 12 cm, and a voltage of 15 kV. The study of film properties showed that the antibacterial activity of the fibrous GE film depended only on the grafted quaternary ammonium, whereas the thermostability, wettability, and permeability were greatly influenced by both the TGase cross-linking and film-forming methods. Cytotoxicity was tested using the CCK-8 and live/dead kit staining methods in vitro, which showed that the modified GE had good biocompatibility.

Bioinspired Injectable Self-Healing Hydrogel Sealant with Fault-Tolerant and Repeated Thermo-Responsive Adhesion for Sutureless Post-Wound-Closure and Wound Healing

Hydrogels with multifunctionalities, including sufficient bonding strength, injectability and self-healing capacity, responsive-adhesive ability, fault-tolerant and repeated tissue adhesion, are urgently demanded for invasive wound closure and wound healing. Motivated by the adhesive mechanism of mussel and brown algae, bioinspired dynamic bonds cross-linked multifunctional hydrogel adhesive is designed based on sodium alginate (SA), gelatin (GT) and protocatechualdehyde, with ferric ions added, for sutureless post-wound-closure. The dynamic hydrogel cross-linked through Schiff base bond, catechol-Fe coordinate bond and the strong interaction between GT with temperature-dependent phase transition and SA, endows the resulting hydrogel with sufficient mechanical and adhesive strength for efficient wound closure, injectability and self-healing capacity, and repeated closure of reopened wounds. Moreover, the temperature-dependent adhesive properties endowed mispositioning hydrogel to be removed/repositioned, which is conducive for the fault-tolerant adhesion of the hydrogel adhesives during surgery. Besides, the hydrogels present good biocompatibility, near-infrared-assisted photothermal antibacterial activity, antioxidation and repeated thermo-responsive reversible adhesion and good hemostatic effect. The in vivo incision closure evaluation demonstrated their capability to promote the post-wound-closure and wound healing of the incisions, indicating that the developed reversible adhesive hydrogel dressing could serve as versatile tissue sealant.

Biomimetic, mussel-inspired surface modification of 3D-printed biodegradable polylactic acid scaffolds with nano-hydroxyapatite for bone tissue engineering

Polylactic acid (PLA) has been widely used as filaments for material extrusion additive manufacturing (AM) to develop patient-specific scaffolds in bone tissue engineering. Hydroxyapatite (HA), a major component of natural bone, has been extensively recognized as an osteoconductive biomolecule. Here, inspired by the mussel-adhesive phenomenon, in this study, polydopamine (PDA) coating was applied to the surface of 3D printed PLA scaffolds (PLA@PDA), acting as a versatile adhesive platform for immobilizing HA nanoparticles (nHA). Comprehensive analyses were performed to understand the physicochemical properties of the 3D-printed PLA scaffold functionalized with nHA and PDA for their potent clinical application as a bone regenerative substitute. Scanning electron microscopy (SEM) and element dispersive X-ray (EDX) confirmed a successful loading of nHA particles on the surface of PLA@PDA after 3 and 7 days of coating (PLA@PDA-HA3 and PLA@PDA-HA7), while the surface micromorphology and porosity remain unchanged after surface modification. The thermogravimetric analysis (TGA) showed that 7.7 % and 12.3% mass ratio of nHA were loaded on the PLA scaffold surface, respectively. The wettability test indicated that the hydrophilicity of nHA-coated scaffolds was greatly enhanced, while the mechanical properties remained uncompromised. The 3D laser scanning confocal microscope (3DLS) images revealed that the surface roughness was significantly increased, reaching Sa (arithmetic mean height) of 0.402 μm in PLA@PDA-HA7. Twenty-eight days of in-vitro degradation results showed that the introduction of nHA to the PLA surface enhances its degradation properties, as evidenced by the SEM images and weight loss test. Furthermore, a sustainable release of Ca²⁺ from PLA@PDA-HA3 and PLA@PDA-HA7 was recorded, during the degradation process. In contrast, the released hydroxyl group of nHA tends to neutralize the local acidic environments, which was more conducive to osteoblastic differentiation and extracellular mineralization. Taken together, this facile surface modification provides 3D printed PLA scaffolds with effective bone regenerative properties by depositing Ca²⁺ contents, improving surface hydrophilicity, and enhancing the in-vitro degradation rate.

Preparation and Properties of Double-Crosslinked Hydroxyapatite Composite Hydrogels

Natural polymer hydrogels have good mechanical properties and biocompatibility. This study designed hydroxyapatite-enhanced photo-oxidized double-crosslinked hydrogels. Hyaluronic acid (HA) and gelatin (Gel) were modified with methacrylate anhydride. The catechin group was further introduced into the HA chain inspired by the adhesion chemistry of marine mussels. Hence, the double-crosslinked hydrogel (HG) was formed by the photo-crosslinking of double bonds and the oxidative-crosslinking of catechins. Moreover, hydroxyapatite was introduced into HG to form hydroxyapatite-enhanced hydrogels (HGH). The results indicate that, with an increase in crosslinking network density, the stiffness of hydrogels became higher; these hydrogels have more of a compact pore structure, their anti-degradation property is improved, and swelling property is reduced. The introduction of hydroxyapatite greatly improved the mechanical properties of hydrogels, but there is no change in the stability and crosslinking network structure of hydrogels. These inorganic phase-enhanced hydrogels were expected to be applied to tissue engineering scaffolds.

Tissue Adhesive, Self-Healing, Biocompatible, Hemostasis, and Antibacterial Properties of Fungal-Derived Carboxymethyl Chitosan-Polydopamine Hydrogels

In this work, fungal mushroom-derived carboxymethyl chitosan-polydopamine hydrogels (FCMCS-PDA) with multifunctionality (tissue adhesive, hemostasis, self-healing, and antibacterial properties) were developed for wound dressing applications. The hydrogel is obtained through dynamic Schiff base cross-linking and hydrogen bonds between FCMCS-PDA and covalently cross-linked polyacrylamide (PAM) networks. The FCMCS-PDA-PAM hydrogels have a good swelling ratio, biodegradable properties, excellent mechanical properties, and a highly interconnected porous structure with PDA microfibrils. Interestingly, the PDA microfibrils were formed along with FCMCS fibers in the hydrogel networks, which has a high impact on the biological performance of hydrogels. The maximum adhesion strength of the hydrogel to porcine skin was achieved at about 29.6 ± 2.9 kPa. The hydrogel had good self-healing and recoverable properties. The PDA-containing hydrogels show good antibacterial properties on Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) bacteria. Moreover, the adhesive hydrogels depicted good viability and attachment of skin fibroblasts and keratinocyte cells. Importantly, FCMCS and PDA combined resulted in fast blood coagulation within 60 s. Hence, the adhesive hydrogel with multifunctionality has excellent potential as a wound dressing material for infected wounds.

Study on the mechanism of laccase-catalyzed polydopamine rapid dyeing and modification of silk

Research on the polymerization of dopamine and its modification on the surface of materials has received extensive attention. In this work, the process of laccase catalyzing the rapid polymerization of dopamine and in situ dyeing of silk fabric were studied. The results showed that laccase catalyzed dyeing for 3 h under acidic conditions could achieve the dyeing effect of 24 h under an alkaline environment, and the enzyme catalyzed polydopamine showed better deposition uniformity on the substrate surface. According to molecular simulation analysis, dopamine oligomers were easily combined with the amorphous regions of silk fibroin, and dopamine oligomers and amino acids of silk fibroin could form hydrogen bonds and π–π stacking interactions. Dopamine oligomers could form intermolecular and intramolecular hydrogen bonds through amino groups and hydroxyl groups. In addition, dopamine oligomers would aggregate in the process of binding to silk fibroin and adsorbed to the surface of silk fibroin in the form of aggregates, and Michael addition reaction would also occur between dopamine oligomers and silk fibroin. Finally, the silk fabrics loaded with polydopamine were reacted with different kinds of metal salt solutions to form particles with different morphologies and crystal structures on the surface of the silk fibers, and the modified silk fabrics showed good hydrophobicity.

Dopamine oligomers are easily combined with amorphous regions of silk fibroin, they can form hydrogen bonds and π–π stacking interactions, and undergo Michael addition reactions. The oligomers will aggregate in the process.