Surface Characterization and Biocompatibility of Hydroxyapatite Coating on Anodized TiO2 Nanotubes via PVD Magnetron Sputtering

A Comparative Study in the Design of TiO2 Assisted Photocatalytic Coatings Monitored by Controlling Hydrophilic Behavior and Rhodamine B Degradation

This work presents a comparative study related to the photocatalytic efficiency associated with wettability measurements and organic dye degradation, as well as other relevant properties (i.e., corrosion resistance, roughness, wettability, and adhesion to a substrate). The photocatalytic precursors are titanium dioxide nanoparticles (TiO₂ NPs) which are dispersed onto a polymeric electrospun fiber matrix by using three different deposition techniques such as electrospraying, spraying, and dip-coating, respectively. In this work, the host electrospun matrix is composed of poly(acrylic acid) fibers crosslinked with cyclodextrin (β-CD), which shows a good chemical affinity and stability with the other deposition techniques which are responsible for incorporating the TiO₂ NPs. In order to evaluate the efficacy of each coating, the resultant photocatalytic activity has been monitored by two different tests. Firstly, the reduction in the water contact angle is appreciated, and secondly, the degradation of an organic dye (Rhodamine B) is observed under UV irradiation. In addition, the final roughness, adherence, and pitting corrosion potential have also been controlled in order to determine which solution provides the best combination of properties. Finally, the experimental results clearly indicate that the presence of TiO₂ NPs deposited by the three techniques is enough to induce a super hydrophilic behavior after UV irradiation. However, there are notable differences in photocatalytic efficiency on the Rhodamine B as a function of the selected deposition technique.

Chitosan/Xanthan/Hydroxyapatite-graphene oxide porous scaffold associated with mesenchymal stem cells for dentin-pulp complex regeneration

The aim of this paper was to synthesize and characterize polymeric scaffolds of Chitosan/Xanthan/Hydroxyapatite-Graphene Oxide nanocomposite associated with mesenchymal stem cells for regenerative dentistry application. The chitosan-xanthan gum (CX) complex was associated with Hydroxyapatite-Graphene Oxide (HA-GO) nanocomposite with different Graphene Oxides (GO) concentration (0.5 wt%; 1.0 wt%; 1.5 wt%). The scaffolds characterizations were performed by X-ray diffraction (XRD), Fourier Transform Infrared Spectroscopy (FTIR), Raman spectroscopy, thermogravimetric analysis (TGA), scanning electron microscopy (SEM) and contact angle. The mechanical properties were assessed by compressive strength. The in vitro bioactivity and the in vitro cytotoxicity test (MTT test) were analyzed as well. The data was submitted to the Normality and Homogeneity tests. In vitro Indirect Cytotoxicity assay data was statistically analyzed by ANOVA two-way, followed by Tukey's test (α = 0.05). Compressive strength and contact angle data were statistically analyzed by one-way ANOVA, followed by Tukey's test (α = 0.05). XRD showed the presence of Hydroxyapatite (HA) peaks in the structures CXHA, CXHAGO 0.5%,1.0% and 1.5%. FT-IR showed amino and carboxylic bands characteristic of CX. Raman spectroscopy analysis evidenced a high quality of the GO. In the TGA it was observed the mass loss associated with the CX degradation by depolymerization. SEM analysis showed pores in the scaffolds, in addition to HA incorporated and adhered to the polymer. Contact angle test showed that scaffolds have a hydrophilic characteristic, with the CX group the highest contact angle and CXHA the lowest (p < 0.05). 1.0 wt% GO significantly increased the compressive strength compared to other compositions. In the bioactivity test, the apatite crystals precipitation on the scaffold surface was observed. MTT test showed high cell viability in CXHAGO 1.0% and CXHAGO 1.5% scaffold. CXHAGO scaffolds are promising for regenerative dentistry application because they have morphological characteristics, mechanical and biological properties favorable for the regeneration process.

Metal-Phenolic Networks Assembled on TiO2 Nanospikes for Antimicrobial Peptide Deposition and Osteoconductivity Enhancement in Orthopedic Applications

The lack of antimicrobial and osteoconductive activities of titanium (Ti) for orthopedic implants has led to problems such as infection and structural looseness, which bring physical and psychological sufferings to patients as well as economic burden on the healthcare system. To endow Ti implants with anti-infective function and bioactivity, in this study, we successfully constructed TiO2 nanospike (TNS) structure on the surface of Ti followed by assembling metal-polyphenol networks (MPNs) and depositing antimicrobial peptides (AMPs). The TNSs' structure can disrupt the bacteria by physical puncture, and it was also proved to have excellent photothermal conversion performance upon near-infrared light irradiation. Furthermore, with the assistance of contact-active chemo bactericidal efficacy of AMPs, TNS-MPN-AMP nanocoating achieved physical/photothermal/chemo triple-synergistic therapy against pathogenic bacteria. The anti-infective efficiency of this multimodal treatment was obviously improved, with an antibacterial ratio of >99.99% in vitro and 95.03% in vivo. Moreover, the spike-like nanostructure of TNSs and the bioactive groups from MPNs and AMPs not only demonstrated desirable biocompatibility but also promoted the surface hydroxyapatite formation in simulated body fluid for further osseointegration enhancement. Altogether, this multifaceted TNS-MPN-AMP nanocoating endowed Ti implants with enhanced antibacterial activity, excellent cytocompatibility, and desirable osteoconductive ability.

Corrosion, mechanical and bioactivity properties of HA-CNT nanocomposite coating on anodized Ti6Al4V alloy

Hydroxyapatite-carbon nanotubes (HA-CNTs) nanocomposite coating was applied by electrophoretic method on anodized Ti alloy to investigate its stability in simulated body fluid (SBF). The biocoating was characterized by using scanning electron microscope (SEM) for microstructure, X-ray diffraction (XRD) for crystallography. The effect of CNTs concentration on the coating properties was also investigated and found out that CNTs up to 5% has various improving effect on the system. It increased corrosion resistance and adhesion of the coating to the substrate and decreased the number of cracks on the coating. The results of the in vitro test showed that the cell viability increased with increasing the concentration of CNTs to 3 wt.% CNTs. Graphical abstract.

Photoelectrochemical Enzyme Biosensor Based on TiO2 Nanorod/TiO2 Quantum Dot/Polydopamine/Glucose Oxidase Composites with Strong Visible-Light Response

Although photoelectrochemical (PEC) enzyme biosensors based on visible-light detection would have a high practical value, their development has been limited by the weak visible-light response of available photoactive substrates. Here, to enhance the visible-light response of a photoelectric substrate, a TiO₂ nanorods (NRs)/TiO₂ quantum dots (QDs)/polydopamine (PDA)/glucose oxidase nanocomposite was prepared via hydrothermal synthesis, followed by photopolymerization. TiO₂ QDs with strong light absorption and excellent photocatalytic activity were introduced between the TiO₂ NRs and the PDA. An efficient electron transport interface that formed as a result of the combination of the TiO₂ NRs, TiO₂ QDs, and the PDA could not only transfer electrons quickly and orderly, but also substantially improve the response of the TiO₂ NRs under visible light. Through a series glucose detection, a sensor based on the nanocomposite was found to exhibit superior sensing performance under visible light with a sensitivity of 4.63 μA mM^-1 cm^-2, a linear response over the concentration 0.1-4 mM, and a detection limit of 8.16 μM. This work proposes a biosensor that can detect under visible light, thereby expanding the application range of PEC enzyme biosensors.