Silver Nanodot Decorated Dendritic Copper Foam As a Hydrophobic and Mechano-Chemo Bactericidal Surface

High-Performance Roller Tube-Shaped Copper Foam Solar Evaporators with Copper Foil Integration for Enhanced Thermal Control

The growing global freshwater shortage and climate crisis are increasing the dependence on water desalination technologies. To meet this pressing demand, innovative solutions that utilize renewable energy sources like solar power, with an emphasis on improving evaporation processes, are essential. Although considerable research has been conducted on a variety of materials and structural designs, the development of highly efficient solar steam generators for large-scale use remains a challenge. Here, we introduce a novel design: a two-layer vertical evaporation cylinder in a roll format that integrates a small, inverted cone-shaped pure copper (ICPC) foam and etched copper foil to enhance thermal management. The primary objective is to advance direct solar desalination and interfacial evaporation by effectively capturing both direct and reflected light while preventing salt accumulation through self-cleaning. This design leverages the optical properties of the three materials─absorption, reflection, and transmission─while providing deeper insights into seawater behavior within the foam's interconnected pores. It also addresses common challenges encountered by traditional solar evaporators, such as salt buildup, uncontrolled water flow, and poor thermal management. This cutting-edge solar evaporation system exhibits exceptional performance, remarkable adaptability to diverse configurations, and represents a breakthrough in sustainable chemistry, featuring an advanced engineering design that achieves an outstanding evaporation rate of 17.15 kg·m-2·h-1 under 1 sun irradiation.

Synthesis of metal nanoparticles on graphene oxide and antibacterial properties

Pathogen-induced infections and the rise of antibiotic-resistant bacteria, such as Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus), pose significant global health challenges, emphasizing the need for new antimicrobial strategies. In this study, we synthesized graphene oxide (GO)-based composites functionalized with silver nanoparticles (AgNPs) and copper nanoparticles (CuNPs) as potential alternatives to traditional antibiotics. The objective is to assess the antibacterial properties of these composites and explore their efficacy against E. coli and S. aureus, two common bacterial pathogens. The composites are prepared using eco-friendly and conventional methods to ensure effective nanoparticle attachment to the GO surface. Structural and morphological characteristics are confirmed through SEM, AFM, EDS, XRD, UV-vis, FTIR, and Raman spectroscopy. The antibacterial efficacy of the composites is tested through disk diffusion assays, colony-forming unit (CFU) counts, and turbidimetry analysis, with an emphasis on understanding the effects of different nanoparticle concentrations. The results demonstrated a dose-dependent antibacterial effect, with GO/AgNP-1 showing superior antibacterial activity over GO/AgNP-2, particularly at lower concentrations (32.0 μg/mL and 62.5 μg/mL). The GO/CuNP composite also exhibited significant antibacterial properties, with optimal performance at 62.5 μg/mL for both bacterial strains. Turbidimetry analysis confirmed the inhibition of bacterial growth, especially at moderate concentrations, although slight nanoparticle aggregation at higher doses reduced efficacy. Lastly, both GO/AgNP and GO/CuNP composites demonstrated significant antibacterial potential. The results emphasize the need to fine-tune nanoparticle concentration and refine synthesis techniques to improve their efficacy, positioning these composites as strong contenders for antimicrobial use.

Pathological Comparison of Rat Pulmonary Models Induced by Silica Nanoparticles and Indium-Tin Oxide Nanoparticles

Purpose

The objective of this study was to evaluate and compare the histopathological implications of silica nanoparticles (Nano-SiO₂) and indium-tin oxide nanoparticles (Nano-ITO), in vivo.

Methods

Male Sprague-Dawley rats were exposed to Nano-SiO₂ (50 mg/kg) and Nano-ITO (6 mg/kg) by a single intratracheal instillation, respectively. Broncho-alveolar lavage fluid (BALF) and lung tissue were obtained at 7, 14, 28, and 56 days post exposure for analysis of BALF inflammatory factors, total protein, and for lung tissue pathology. Histopathological and ultrastructural change in lungs were investigated by hematoxylin and eosin, Masson’s trichrome, sirius red staining, periodic acid Schiff stain, and transmission electron microscopy. The expression of SP-A, collagen type I and III in lung tissue was determined by immunohistochemistry and ELISA.

Results

The rats in both models exhibited obvious collagen fibrosis and the severity of the lung injury increased with time after exposure to respective dosage increased. Several parameters of pulmonary inflammation and fibrosis significantly increased in both groups, which was reflected by increased LDH activity, total proteins, TNF-α, and IL-6 levels in BALF, and confirmed by histopathological examination. The results also showed that the two models exhibited different features. Exposure to Nano-ITO caused persistent chronic lung inflammation, illustrated by the infiltration of a large amount of enlarged and foamy macrophages and neutrophils into the lung parenchyma. In Nano-SiO₂ exposed rat lung tissue, granulomatous inflammation was most prominent followed by progressive and massive fibrotic nodules. Compared with the Nano-SiO₂ rats, Nano-ITO exposed rats exhibited significantly severe pulmonary alveolar proteinosis (PAP) pathological changes, lower fibrosis, and higher levels of inflammatory biomarkers. However, Nano-SiO₂ exposed rats had greater fibrosis pathological changes and more severe granulomas than Nano-ITO exposed rats.

Conclusion

This study suggests that the Nano-SiO₂-induced model has greater value in research into granulomas and fibrosis, while the Nano-ITO-induced model has greater repeatability in area of PAP.

Nature-Inspired Antimicrobial Surfaces and Their Potential Applications in Food Industries

Antimicrobial resistance (AMR) is a growing global concern and has called for the integration of different areas of expertise for designing robust solutions. One such approach is the development of antimicrobial surfaces to combat the emerging resistance in microbes against drugs and disinfectants. This review is a compressive summary of the work done in the field of material science, chemistry, and microbiology in the development of antimicrobial materials and surfaces that are inspired by examples in nature. The focus includes examples of natural antimicrobial surfaces, such as cicada wings or nanopillars, dragonfly wings, shrimp shells, taro leaves, lotus leaves, sharkskin, gecko skin, and butterfly wings, along with their mechanism of action. Techniques, compositions, and combinations that have been developed to synthetically mimic these surfaces against bacterial/viral and fungal growth in food-processing areas have also been discussed. The applications of synthetic mimics of natural antimicrobial surfaces in food-processing environments is still a naïve area of research. However, this review highlights the potential applications of natural antimicrobial surfaces in the food-processing environment as well as outlines the challenges that need mitigations.