2D WO3-x Nanosheet with Rich Oxygen Vacancies for Efficient Visible-Light-Driven Photocatalytic Nitrogen Fixation

One-Step Strategy to Maximize Single-Atom Catalyst Utilization in Nitrate Reduction via Bidirectional Optimization of Mass Transfer and Electron Supply

Single-atom catalysts offer exceptional performance but face practical challenges due to complex synthesis and low efficiency caused by mass transfer resistance. In this study, based on a simple one-step pyrolysis method, we designed a Cu single-atom catalyst with high active site exposure and a locally electron-deficient environment (HE Cu1-N4) to achieve maximum utilization efficiency in electrocatalytic nitrate reduction (NO3RR). Using advanced characterization techniques, we confirmed that its unique 3D structure enhances Cu atom exposure and reduces nitrate (NO3-) mass transfer resistance. Synchrotron radiation and DFT calculations showed that adjusting the coordination environment induces a local electron-deficient effect in Cu atoms, increasing the electrostatic attraction to NO3-. HE Cu1-N4 achieved 100% NH3 selectivity across a wide range of NO3- concentrations, with an NH3 yield (5.09 mg h-1 mgcat-1) nearly 7-fold higher than that of the conventional unmodified Cu single-atom catalyst (Cu1-N2, 0.73 mg h-1 mgcat-1). Under pilot-scale conditions, HE Cu1-N4 demonstrated strong resistance to interference and excellent stability in complex water systems. A simple modification method enhanced the utilization efficiency of single atoms in single-atom catalysts, significantly improving the catalytic activity of the material. Moreover, this straightforward synthesis strategy holds promise for the large-scale production of single-atom catalysts, paving the way for practical engineering applications.

Efficient photocatalytic degradation of microplastics by constructing a novel Z-scheme Fe-doped BiO2-x/BiOI heterojunction with full-spectrum response: Mechanistic insights and theory calculations

Recently, microplastics (MPs) have garnered significant attention as a challenging emerging pollutant to address. Here, a full-spectrum light-driven Fe-doping BiO2-x/BiOI (FBI) Z-scheme heterojunction was constructed for efficiently degrading MPs in waters. Compared with BiO2-x, Fe doping BiO2-x, and BiOI, the optimal photocatalyst (40-FBI) can cause deep cracks in the polyethylene terephthalate (PET) within 10 h under the irradiation of full-spectrum light. Meanwhile, FT-IR characterization revealed that the absorption peak intensities of the C-O group, CO group, -CH stretching vibration, and -OH group on the MPs surface gradually increased with degradation time. A series of experiments and theory calculations revealed that the introduction of Fe creates impurity levels, accelerating the separation of photo-generated carriers and reducing the work function of BiO2-x, thereby enhancing the transport of photo-generated carriers between Z-scheme heterojunctions. This study offers a valuable idea for designing an efficient photocatalyst by simultaneously introducing ion doping and constructing heterojunctions for enhancing MPs degradation.

Introducing Oxygen Vacancies into a WO3 Photoanode through NaH2PO2 Treatment for Efficient Water Splitting

WO3, with a high light absorption capacity and a suitable band structure, is considered a promising photoanode material for photoelectrochemical water splitting. However, the poor photoinduced electron-hole separation efficiency limits its application. Herein, we report an effective strategy to suppress electron-hole recombination by introducing oxygen vacancies (OV) on the surface of a WO3 photoanode through NaH2PO2 treatment. An OV-enriched amorphous surface layer with a thickness of 4 nm is formed after NaH2PO2 treatment, which increases the charge carrier density and enlarges the electrochemical surface area of the photoanode. The charge separation and surface injection efficiencies are both improved after NaH2PO2 treatment, and the charge transfer process of the photoanode is accelerated consequently. The current density of the modified WO3 photoanode reaches 0.96 mA cm-2 at 1.23 V.

Synergistic Tuning of Heterovalent States and Oxygen-Vacancy Defect Engineering in Hydrophilic W-Doped Sb2OS2 for Enhanced Nitrogen Photoreduction to Ammonia

Nitrogen fixation reaction via photocatalysis offers a green and promising strategy for renewable NH3 synthesis, and catalysts with high-efficiency photocatalytic properties are essential to the process. Herein, we demonstrate a W-doped Sb2OS2 bimetal oxysulfide catalyst (labeled as SbWOS) with abundant oxygen vacancies, heterovalent metal states, and hydrophilic surfaces for nitrogen photoreduction to ammonia. The SbWOS-3 with suitable W-doping exhibited excellent nitrogen fixation activity of 408.08 μmol·g-1·h-1 and an apparent quantum efficiency (AQE) of 1.88% at 420 nm and a solar-to-ammonia (STA) conversion efficiency of 0.082% in pure water under AM1.5G light irradiation. The W-doping not only transforms hydrophobic Sb2OS2 into a hydrophilic catalyst, making it easier for H2O molecules adsorbed on the SbWOS surface and catalyzed into protons, but also endows the SbWOS catalyst with rich oxygen vacancies, acting as the active sites for trapping and activating the N2 molecule, and for trapping and activating H2O to produce the protons for the N2 photocatalytic reduction reaction. The hydrazine drives the SbWOS catalyst with the heterovalent metal states, which acts as the photogenerate electrons quickly hopping between W5+ and W6+ to transfer for the N2 reduction reaction. This study provides a feasible scheme for applying oxygen vacancy defects, heterovalent metal states, and surface hydrophobic-to-hydrophilic wetting engineering in bimetal oxysulfide for N2 photoreduction to ammonia.

Efficient photocatalytic nitrogen fixation via oxygen vacancies in Zr-MOFs at ambient conditions

Photocatalytic nitrogen fixation is seen to be a potential technology for nitrogen reduction due to its eco-friendliness, low energy consumption, and environmental protection. In this study, photocatalysts with abundant oxygen vacancies (Zr-naphthalene dicarboxylic acid (Zr-NDC) and Zr-phthalic acid (Zr-BDC)) were designed using 1,4-naphthalene dicarboxylic acid (H2NDC) and 1,4-phthalic acid (H2BDC) as ligands. Since the structure of H2NDC includes one extra benzene ring than H2BDC, the charge density differential of the organic ligand is probably altered. The hypothesis is proved by density function theory (DFT) calculation. The abundant oxygen vacancies of the catalyst offer numerous active sites for nitrogen fixation. Concurrently, the process of ligand-metal charge transfer facilitates photo-electron transfer, creating an active center for nitrogen reduction. Additionally, the functionalization of ligand amplifies another pathway for charge transfer, broadening the light absorption range of Metal-organic framework (MOF) and increasing its capacity for nitrogen reduction. In contrast to H2BDC, the benzene ring added in H2NDC structure acts as an electron energy storage tank with a stronger electron density difference favorable for photogenerated electron-hole separation resulting in higher photocatalytic activity in Zr-NDC. The experimental results show that the nitrogen fixation efficiency of Zr-NDC is 163.7 µmol g-1h-1, which is significantly better than that of Zr-BDC (29.3 µmol g-1h-1). This work utilizes cost-effective and non-toxic ingredients to design highly efficient photocatalysts, thereby significantly contributing to the practical implementation of green chemistry principles.

Facet-dependent activation of oxalic acid over hematite nanocrystals under the irradiation of visible light for efficient degradation of pollutants

Naturally occurring hematite has been widely studied in the Fenton-like system for water pollutant remediation due to its abundance and non-toxicity. However, its inadequate catalytic activity results in difficulty in effectively degrading pollutants in the catalytic degradation system that it constitutes. Thus, we constructed a photochemical system composed of hematite with {001} facet of high activity facet and low-cost and non-toxic oxalic acid (OA) for the removal of various types of pollutants. The removal rate for the degradation of metronidazole, tetracycline hydrochloride, Rhodamine B, and hexavalent chromium by hematite nanoplate with the exposed {001} facet activating OA under visible light irradiation was 4.75, 2.25, 2.33, and 2.74 times than that by the exposed {110} facet, respectively. Density functional theory (DFT) calculation proved that the OA molecule was more easily adsorbed on the {001} facet of hematite than that on the {110} facet, which would favor the formation of the more Fe(III)-OA complex and reactive species. In addition, the reactive site of metronidazole for the attraction of radicals was identified on the basis of the DFT calculation on the molecular occupied orbitals, and the possible degradation pathway for metronidazole included carbon chain fracture, hydroxyethyl-cleavage, denitrogenation, and hydroxylation. Thus, this finding may offer a valuable direction in designing an efficient iron-based catalyst based on facet engineering for the improved activity of Fenton-like systems such as OA activation.

Degradation of microplastic in water by advanced oxidation processes

Plastic products have gained global popularity due to their lightweight, excellent ductility, high durability, and portability. However, out of the 8.3 billion tons of plastic waste generated by human activities, 80% of plastic waste is discarded due to improper disposal, and then transformed into microplastic pollution under the combined influence of environmental factors and microorganisms. In this comprehensive study, we present a thorough review of recent advancements in research on the source, distribution, and effect of microplastics. More importantly, we conducted deep research on the catalytic degradation technologies of microplastics in water, including advanced oxidation and photocatalytic technologies, and elaborated on the mechanisms of microplastics degradation in water. Besides, various strategies for mitigating microplastic pollution in aquatic ecosystems are discussed, ranging from policy interventions, the initiative for plastic recycling, the development of efficient catalytic materials, and the integration of multiple technological approaches. This review serves as a valuable resource for addressing the challenge of removing microplastic contaminants from water bodies, offering insights into effective and sustainable solutions.

Synergistic Spatial Confining Effect and O Vacancy in WO3 Hollow Sphere for Enhanced N2 Reduction

Visible-light-driven N2 reduction into NH3 in pure H2O provides an energy-saving alternative to the Haber-Bosch process for ammonia synthesizing. However, the thermodynamic stability of N≡N and low water solubility of N2 remain the key bottlenecks. Here, we propose a solution by developing a WO3-x hollow sphere with oxygen vacancies. Experimental analysis reveals that the hollow sphere structure greatly promotes the enrichment of N2 molecules in the inner cavity and facilitates the chemisorption of N2 onto WO3-x-HS. The outer layer's thin shell facilitates the photogenerated charge transfer and the full exposure of O vacancies as active sites. O vacancies exposed on the surface accelerate the activation of N≡N triple bonds. As such, the optimized catalyst shows a NH3 generation rate of 140.08 μmol g-1 h-1, which is 7.94 times higher than the counterpart WO3-bulk.

Photocatalytic Synthesis of Ammonia from Pinecone Graphite-Phase Carbon Nitride Loaded with MoS2 Nanosheets as Co-catalysts

Photocatalytic nitrogen fixation is a promising alternative to the Haber-Bosch process to alleviate the energy and environmental crises. Here, we designed a pinecone-shaped graphite-phase carbon nitride (PCN) catalyst supported with MoS₂ nanosheets by a supramolecular self-assembly method. The catalyst shows an excellent photocatalytic nitrogen reduction reaction (PNRR) due to the larger specific surface area and the enhancement of visible light owing to the reduced band gap. Under simulated sunlight, the sample of PCN loaded with 5 wt % MoS₂ nanosheets (MS5%/PCN) shows a PNRR efficiency of 279.41 μmol g^-1 h^-1, which is 14.9 times that of bulk graphite-phase carbon nitride (g-C₃N₄), 4.6 times that of PCN, and 5.4 times that of MoS₂, respectively. The unique pinecone-like structure of MS5%/PCN not only improves the ability of light absorption but also assists in the uniform loading of MoS₂ nanosheets. Likewise, the existence of MoS₂ nanosheets improves the light absorption ability of the catalyst and reduces the impedance of the catalyst. Furthermore, as a co-catalyst, MoS₂ nanosheets can efficiently adsorb nitrogen (N₂) and serve as active N₂ reduction sites. From the perspective of structural design, this work can offer novel solutions for the creation of effective N₂-fixing photocatalysts.

Improving the Surface Oxygen Vacancy Concentration of Bi2O4 through the Pretreatment of the NaBiO3·2H2O Precursor as a High-Performance Visible Light Photocatalyst

The oxygen-deficient bismuth oxide, Bi₂O₄, synthesized by a typical hydrothermal method using commercial NaBiO₃·2H₂O as a raw material only has a relatively low concentration of surface oxygen vacancies (OVs). How to improve the visible light photocatalytic performance of Bi₂O₄ via tuning its surface OV concentration is still a huge challenge. In this study, improving the surface OVs of Bi₂O₄ was successfully realized through the pretreatment of commercial NaBiO₃·2H₂O, including thermal treatment in air and hydrothermal treatment in 10 M NaOH solution, forming NaBiO₃·xH₂O intermediate products first, and then hydrothermal preparation of Bi₂O₄ target products using NaBiO₃·xH₂O instead of commercial NaBiO₃·2H₂O as the precursor. The enhanced surface OV content not only narrows the band gap of Bi₂O₄ and thus extends its optical response range but also captures more photoexcited electrons and thus increases the charge carriers' separation efficiency and prolongs the charge carriers' lifetime of Bi₂O₄. Among the above-mentioned two pretreatment methods, the effects of the hydrothermal pretreatment are superior to those of the thermal treatment, involving the increase of surface OVs, the optical harvesting capacity, and the charge carriers' separation efficiency. Accordingly, Bi₂O₄ prepared by the hydrothermal pretreatment route exhibits the optimal visible light catalytic performance toward the removal of methyl orange (MO) and phenol due to its most abundant surface OV concentration, which is 2.59 times and 4.26 times higher than that of Bi₂O₄ synthesized directly by the commercial NaBiO₃·2H₂O route, respectively. Holes (h⁺) and superoxide radicals (^•O₂^-) are identified as the main active species, while singlet oxygen (¹O₂) and hydroxyl radicals (^•OH) are verified as the second and third important active species for organic pollutant removal, respectively. This work has developed a novel strategy to promote the catalytic performance of single Bi₂O₄ induced by the enhanced surface OV concentration through the pretreatment of the precursor, commercial NaBiO₃·2H₂O.

Intrinsic Mechanism Analyses of Significantly Enhanced Photoelectrochemical Performance of the Bi2MoO6/BiVO4 System

In this paper, the electrodeposition and hydrothermal methods were used to prepare the Bi₂MoO₆/BiVO₄ photoelectrode, and the intrinsic mechanism of significantly enhanced photoelectrochemical performance of the prepared Bi₂MoO₆/BiVO₄ heterojunction system was studied. Work functions of Bi₂MoO₆ and BiVO₄ were analyzed using a scanning Kelvin probe, and the direction of the heterojunction electric field and the transfer direction of photogenerated carriers were finally determined by the relative positions of the energy bands and the Fermi levels of Bi₂MoO₆ and BiVO₄. A type II Bi₂MoO₆/BiVO₄ heterojunction system was finally confirmed to be formed. Formation of the type II Bi₂MoO₆/BiVO₄ heterojunction system reduces the recombination efficiency of photogenerated electrons and holes and thus improves the photoelectrochemical performance. The photogenerated current density of the Bi₂MoO₆/BiVO₄ photoelectrode reaches 1.47 mA·cm^-2, which is 4.9 times that of pure BiVO₄ and thousands of times that of Bi₂MoO₆. The successful application of a scanning Kelvin probe in the verification of the heterojunction type provides theoretical and technical bases for the design and construction of efficient heterojunctions.

Recent Advances in Application of Graphitic Carbon Nitride-Based Catalysts for Photocatalytic Nitrogen Fixation

Ammonia, the second most-produced chemical, is widely used in agricultural and industrial applications. However, traditional industrial ammonia production dominated by the Haber-Bosch process presents huge resource and environment issues due to the massive energy consumption and CO₂ emission. The newly emerged nitrogen fixation technology, photocatalytic N₂ reduction reaction (p-NRR), uses clean solar energy with zero-emission, holding great prospect to achieve sustainable ammonia synthesis. Although great efforts are made, the p-NRR catalysts still suffer from poor N₂ adsorption and activation, inferior light absorption, and fast recombination of photocarriers. Due to the tunable electronic structure of the metal-free polymeric graphitic carbon nitride (g-C₃ N₄ ), the above-mentioned issues can be significantly alleviated, making it the most promising p-NRR photocatalyst. This review summarizes the recent development of g-C₃ N₄ -based catalysts for p-NRR, including the working principle of p-NRR catalysts, the challenges of developing p-NRR catalysts, and corresponding solutions. Particularly, the roles of defect engineering and heterojunction construction on g-C₃ N₄ to the enhancement of photocatalytic performances are emphasized. In addition, computational studies are introduced to deepen the understanding of reaction pathways. At last, perspectives are provided on the development of p-NRR catalysts.

Synthesis, Structure, and Photocatalytic Activity of TiO2-Montmorillonite Composites

In the present study, TiO2-montmorillonite (MMT) composites were synthesized hydrothermally under variable conditions, including the TiO2/MMT mass ratio, reaction pH, reaction temperature, and dwelling time. These samples were determined by X-ray photoelectron spectrometry (XPS), ultraviolet–visible spectroscopy% (UV-Vis DRS), electrochemical impedance spectroscopy (EIS), transient photocurrent responses, photoluminescence (PL) spectra, electron paramagnetic resonance (EPR), and N2 adsorption–desorption isotherms. The photocatalytic activity was evaluated as the ability to promote the visible-light-driven degradation of 30 mg/L of aqueous methylene blue, which was maximized for the composite with a TiO2 mass ratio of 30 wt% prepared at a pH of 6, a reaction temperature of 160 °C, and a dwelling time of 24 h (denoted as 30%-TM), which achieved a methylene blue removal efficiency of 95.6%, which was 4.9 times higher than that of pure TiO2. The unit cell volume and crystallite size of 30%-TM were 92.43 Å3 and 9.28 nm, respectively, with a relatively uniform distribution of TiO2 particles on the MMT’s surface. In addition, 30%-TM had a large specific surface area, a strong light absorption capacity, and a high Ti3+ content among the studied catalysts. Thus, the present study provides a basis for the synthesis of composites with controlled structures.