Flower-Shaped Ni/Co MOF with the Highest Adsorption Capacity for Reactive Dyes

Nanoarchitectonics Design Strategy of Metal-Organic Framework and Bio-Metal-Organic Framework Composites for Advanced Wastewater Treatment through Adsorption

Freshwater depletion is an alarm for finding an eco-friendly solution to treat wastewater for drinking and domestic applications. Though several methods like chlorination, filtration, and coagulation-sedimentation are conventionally employed for water treatment, these methods need to be improved as they are not environmentally friendly, rely on chemicals, and are ineffective for all kinds of pollutants. These problems can be addressed by employing an alternative solution that is effective for efficient water treatment and favors commercial aspects. Metal organic frameworks (MOFs), an emerging porous material, possess high stability, pore size tunability, greater surface area, and active sites. These MOFs can be tailored; thus, they can be customized according to the target pollutant. Hence, MOFs can be employed as adsorbents that effectively target different pollutants. Bio-MOFs are a kind of MOFs that are incorporated with biomolecules, which also possess properties of MOFs and are used as a nontoxic adsorbent. In this review, we elaborate on the interaction between MOFs and target pollutants, the role of linkers in the adsorption of contaminants, tailoring strategy that can be employed on MOFs and Bio-MOFs to target specific pollutants, and we also highlight the effect of environmental matrices on adsorption of pollutants by MOFs.

Green Synthesis of Cerium-Based Metal-Organic Framework (Ce-UiO-66 MOF) for Wastewater Treatment

Green synthesis of metal-organic frameworks (MOFs) in aqueous solutions under ambient conditions with reduced production costs and environmental effects is an efficient technique to transfer lab-scale production to industrial large scale. Hence, this work proposes a green, low-cost, sustainable, rapid, and innovative synthetic strategy to produce cerium-based (Ce-UiO-66) MOFs under ambient conditions in the presence of water as a green solvent. This synthetic strategy exhibits great potential compared to conventional solvothermal synthetic techniques, and it does not need external activation energy and organic solvents, which can achieve the standards of green chemistry. Ce-UiO-66 MOF was synthesized successfully and utilized as a green adsorbent to efficiently eliminate anionic Congo Red (CR) dye from dye-containing wastewater. The experimental adsorption results were well matched to the pseudo-second-order kinetic and Langmuir isotherm models, in which the maximum CR adsorption capacity was measured to be about 285.71 mg/g. To evidence the applicability of Ce-UiO-66 MOFs in CR adsorption, the CR adsorption reaction was performed in the presence of interfering pollutants [e.g., salts (NaCl, KCl, and MgCl2) and cationic organic dyes (Malachite Green (MG) and Methylene Blue (MB)], where the results prove the promising adsorption performances of Ce-UiO-66 MOFs toward CR dye. Interestingly, the synthesized adsorbent exhibited high structural stability during repeated adsorption-desorption cycles, where the surface area of MOFs decreased from 555 to 376 m2/g after three cycles, while its CR adsorption capacity decreased by only 10% compared to that of the fresh adsorbent. All these outstanding properties indicate that the Ce-UiO-66 MOFs will be an effective adsorbent for water and wastewater treatment applications.

Ultrasensitive Electrochemical Platform for Dopamine Detection Based on CoNi-MOF@ERGO Composite

An electrochemical sensor applied for dopamine (DA) detection was constructed. An easy static way was used to synthesize bimetallic CoNi-MOF. Next, it was mixed with graphene oxide (GO) under ultrasound to get a uniform suspension. Subsequently, the solution was coated on the glassy carbon electrode (GCE) to form CoNi-MOF@ERGO/GCE by the electrochemical reduction method. The interaction between CoNi-MOF and electrochemically reduced graphene oxide (ERGO) enhances the electrocatalytic performance for DA detection. CoNi-MOF@ERGO/GCE has a wider linear range (0.1-400 μM) and a lower detection limit (0.086 μM) under optimum conditions. Furthermore, it has been applied to test DA in human serum samples. The results reveal that the DA sensor shows excellent performance, which will provide a novel idea for more sensitive and quicker DA detection.

Macroporous Aerogels Using High Internal Phase Pickering Emulsions for Adsorption of Dyes

The treatment of industrial printing and dyeing wastewater is the focus of the chemical environmental protection industry. Noticeably, the physical adsorption has attracted wide attention due to the selective dye adsorption, simple process, and convenient operation. New aerogels featuring low density and high porosity are regarded as ideal physical adsorption materials for sewage treatment. In this work, high internal phase Pickering emulsions were designed and prepared. The polysaccharide complex originating from sodium octenylsuccinate starch and chitosan serves as the stabilizer, water and hexane act as the external and internal phase, respectively. Acrylic acid was introduced into the external phase to initiate UV polymerization. The high internal phase Pickering emulsions as templates were removed through freeze-drying to produce aerogel materials with macroporous structures, the size of the pores: 43.54 ± 12.75 μm. The scanning electron microscopy (SEM) images show that the pore size of aerogel materials was similar to that of emulsion droplets, verifying the template role of emulsion in the polymerization process. In addition, aerogels possess good mechanical properties and can withstand a pressure of megapascal, exhibiting favorable stability when floating in water for a long time (6 months). Methyl violet, malachite green, methylene blue, and acridine orange in aqueous solution were selected as model dyes to explore the removal process and the mechanism. The adsorption was conformed to be the pseudo-second-order kinetic model and the Freundlich adsorption isotherm, namely, the dye adsorption of the aerogels was the multilayer adsorption on the uneven surface, and the mechanism of the adsorption was related to the π-π interaction.

Simultaneous Recovery of Nitrogen and Phosphorus from Sewage by Magnesium Ammonium Phosphate Method with Magnesium-Loaded Bentonite

Excessive nitrogen (N) and phosphorus (P) result in serious eutrophication of water. In this study, magnesium modified acid bentonite was prepared by the impregnation method, and nitrogen and phosphorus were simultaneously removed by the magnesium ammonium phosphate method (MAP), which solved the problem of the poor adsorption capacity of bentonite. The morphology and structure of MgO-SBt were characterized by XRD, FT-IR, SEM, EDS, XPS, BET, etc. The results show that the acidified bentonite can increase the distance between bentonite layers, the layer spacing is expanded to 1.560 nm, and the specific surface area is expanded to 95.433 m²/g. After Mg modification, the characteristic peaks of MgO appear at 2θ of 42.95°, 62.31°, and 78.72°, indicating that MgO has been successfully loaded and that MgO bonded to the surface and interior pores of the acidified bentonite, boosting adsorption performance. When the dosage of MgO-SBt is 0.25 g/L, pH = 9, and N/P ratio is 5:1, the maximum adsorption capacity of MgO-SBt for N and P can reach 193.448 mg/g and 322.581 mg/g. In addition, the mechanism of the simultaneous adsorption of nitrogen and phosphorus by MgO-SBt was deeply characterized by the kinetic model, isothermal adsorption model, and thermodynamic model. The results showed that the simultaneous adsorption of nitrogen and phosphorus by MgO-SBt was chemisorption and a spontaneous exothermic process.

Highly Efficient Solvothermal Synthesis of Poly(1,5-diaminoanthraquinone) Nanoflowers for Energy and Environmental Applications

Poly(1,5-diaminoanthraquinone) (PDAA) has attracted more interest because of its unique molecular structure. However, the lower polymerization yield limits its practical application. Here, the solvothermal chemically oxidative polymerization of 1,5-diaminoanthraquinone (DAA) was developed, and the well-defined PDAA nanoflowers were obtained with a high yield of 72.6% within 16 h. The PDAA nanoflower-based flexible film electrodes were fabricated with expandable graphene as conductive support, delivering a capacitance of 277 F g-1 and 258 mF cm-2 at 0.5 A g-1 (1 mA cm-2) and superior cycling stability with retention of 99% after 10000 cycles. The flexible symmetric solid-state supercapacitors (SSSCs) possessed a high capacitance of 52.5 F g-1 at 0.25 A g-1 and 96.6 mF cm-2 at 1 mA cm-2 and had only a 14% capacitance loss after 10000 cycles at 0.1 V s-1 as well as excellent flexibility. Besides, the PDAA nanoflowers could be used as self-separable adsorbent for methylene blue (MB) with a capacity of 93.8 mg g-1 at pH 9.

In Situ Generated UiO-66/Cotton Fabric Easily Recyclable for Reactive Dye Adsorption

In view of the environmental pollution caused by the widespread use of reactive dyes in the printing and dyeing industry, the modified cotton fabric was loaded with the extremely stable metal-organic frame (MOF) material UiO-66 for removing reactive dyes from colored wastewater. UiO-66/cotton fabric was prepared by in situ synthesis, and its surface morphology and structure were analyzed by XRD, SEM, BET, and XPS. The adsorption performance of UiO-66/cotton fabric on reactive dyes was investigated by adsorbent dosage, adsorption time and temperature, dye concentration, pH, and so on. The results indicated that the adsorption equilibrium time of UiO-66/cotton fabric on reactive orange 16 was 120 min, and the removal rate was about 98%. The adsorption process belongs to simple molecular layer chemisorption and can be regarded as a spontaneous heat absorption reaction, which was consistent with the proposed secondary kinetic model and Langmuir isothermal adsorption model. In addition, the reactive dyes with a higher molecular weight of each sulfonic acid group are more hydrophobic, and the dyes are more likely to aggregate and deposit on the adsorbent surface by electrostatic attraction, hydrogen bonding, and π-π accumulation. Therefore, this work provides a potential UiO-66/cotton fabric application for the effective adsorption of reactive dyes in textile wastewater.

Insights into High-Performance and Selective Elimination of Cationic Dye from Multicomponent Systems by Using Fe-Based Metal-Organic Frameworks

Metal-organic frameworks (MOFs), especially Fe-MOFs, have shown prospective application in eliminating organic dyes from wastewater due to their well-developed pores, water stability, easy preparation, and economy. Herein, we synthesized four types of Fe-MOFs (such as MIL-88A, MIL-88B, MIL-100, and MIL-101) using the hydrothermal method. The products were analyzed with several methods. By comparing the adsorption effect of those four types of Fe-MOFs on three kinds of dyes, it has been shown that MIL-100 owns the best adsorption efficiency on cationic organic dyes methylene blue (MB) and Rhodamine B (RhB) in 180 min, while all MOFs have slight removal capacity on methyl orange (MO). MIL-100, as an adsorbent, was studied under various research conditions, and the maximum removal efficiencies to MB, RhB, and MO were found to be up to 97.36%, 88.75%, and 13.00%, respectively. Furthermore, cationic dye MB's removal by MIL-100 was fitted with a pseudo-second-order model and Langmuir isotherm model (Q_m = 411.041 mg/g) by adsorption kinetics and isotherms research, and MIL-100 could rapidly and selectively divide MB from a binary complex aqueous solution of MB and MO. The as-fabricated MIL-100 also exhibited excellent recyclability after four adsorption-desorption recycles and can be treated as a potential substance with high removal efficiency of cationic organic dye-containing industrial effluents.

Three novel Co(II)-based MOFs: Syntheses, structural diversity, and adsorption properties

In this paper, three new cobalt-based metal organic frameworks (MOFs) with different topologies, namely {[Co(HL)(tib)(H2O)]·2H2O}n (1), [Co3(L)2(bibp)4(H2O)2]n (2) and [Co2(L)(bip)(μ3-OH)]n (3) (H3L = 3-(3,5-dicarboxylphenoxy)-6-carboxylpyridine, tib = 1,3,5-tirs(1-imidazolyl)benzene, bibp = 4,4'-bis(imidazolyl)biphenyl,...