Shape- and Size-Dependent Refractive Index Sensing and SERS Performance of Gold Nanoplates

Raman spectroscopic fingerprinting for the identification and quantitative analysis of sports doping β - agonists based on gold nanopolyhedra

Beta - stimulant, that is, β - adrenergic stimulant, also known as β - agonists, is bioactive catecholamine compounds naturally produced in animals' adrenal medulla glands that induce relaxation in asthmatic airway smooth muscles upon inhalation while also temporarily boosting athletic alertness and alleviating fatigue. However, their potential for dependency poses health risks including unnoticed exacerbation leading to severe illness or fatality prompting their inclusion on WADA's prohibited substances list. Surface - enhanced Raman spectroscopy (SERS) offers a rapid, sensitive, and label - free means for identifying characteristic peaks associated with β - agonist compounds. In our investigation, the utilization of seed - mediated synthesis technique facilitated production of gold polyhedral substrates serving as highly sensitive biosensors for detecting β - agonist presence. The unique geometry of these particles generates enhanced SERS signals due to their multiple corners, resulting low detection limits (9.33 × 10-7, 6.28 × 10-7, and 6.19 × 10-7 g·mL-1 for salbutamol, clenbuterol and higenamine respectively), with promising prospects for improving overall sensitivity in β - agonists detection.

Thermally and Electrically Regulated Plasmonic Devices Based on VO2-Covered Gold Nanoplate Arrays with SiO2 Interface Layer for Large Plasmon Shifts

Integrating metal nanoparticles with vanadium dioxide (VO2) is an effective means to realize active plasmonic regulation which has great application potential in optical devices that respond in real-time to external stimuli. However, the high temperature necessary for VO2 growth severely reshapes the metal nanoparticles, causing reduced refractive index (RI) sensitivity and degraded modulation performance. Herein, we construct a large-area dynamically tunable plasmonic system composed of a VO2-covered array of hexagonal gold nanoplates (AuNPLs). By introducing a SiO2 interface layer, the thermal tolerance of the AuNPLs is effectively improved, making the high RI sensitivity (∼368.3 nm/RIU at 855 nm) survive the subsequent VO2 deposition. Through tuning the localized surface plasmon resonance (LSPR) of the AuNPL array and the thickness of the VO2 film, the LSPR-related transmission dip can be tailored to the near-infrared region where VO2 shows a large two-phase RI contrast, a dip shift up to 272 nm is therefore realized upon VO2 phase transition. Furthermore, electro-optic modulation is demonstrated through electrically triggered VO2 partial phase transition which is accompanied by a gradually changed effective dielectric permittivity, and a continuous shift of the transmission dip from 1070 to 860 nm is achieved by varying the applied electrical current flowing through the film. This work provides a feasible route for controllably constructing stimuli-response optical devices with large wavelength modulation amplitude.

Aggregated gold nanoparticles rich in electromagnetic field "hotspots" for surface enhanced Raman scattering

A simple method for one-step synthesis of aggregated gold nanoparticles (a-AuNPs) using single-layer carbon dots (s-CDs) as the capping agents has been proposed. The obtained a-AuNPs are mainly composed of several spherical AuNPs of 20-25 nm sized, which aggregate to form nanogaps of ∼1 nm. Furthermore, the obtained a-AuNPs produce a strong localized surface plasmon resonance (LSPR) absorption band centered at around 640 nm, which is quite close to the wavelength of the commonly used 633 nm laser in surface enhanced Raman scattering (SERS). Thus, under the irradiation of 633 nm laser, a lot of electromagnetic field "hot spots" are formed at around the nanogaps, and strong SERS activity is achieved. The obtained a-AuNPs are dropped on tin-foil wafers to fabricate SERS substrates, which show the advantages of high sensitivity, fast response, good repeatability and satisfactory stability. On the basis, a sensitive SERS sensor is developed to detect malachite green in aquaculture water, with a low detection limit of 1 × 10-9 mol/L.

Plasmonic Modulation of Gold Nanoplates on Multiwavelength Emission

Plasmonic regulation introduced by metallic nanoparticles is a useful method to improve the detection performance of plasmon-based systems. Herein, we observed a unique enhancement of surface plasmon-coupled emission (SPCE) using plate-shaped plasmonic nanostructures. By assembling Au nanoplates (Au NPLs) via electrostatic adsorption between the Au nanofilm and the quantum dot (QD) layer (630 nm), the fluorescence signal of SPCE was enhanced 90 times more than that of normal SPCE after the conditions were optimized. This enhancement was mainly induced by the intense localized electromagnetic field at the tip of Au NPLs and a novel plasmonic distribution around the "hot-spot" structure between the nanoparticle and Au nanofilm. These effectively mitigated the inherent signal quenching of SPCE and enhanced the emission signal of ultrathin samples on the surface of the NPL-modified Au nanofilm structure. This strategy can be used to improve the detection sensitivity and information integrity of SPCE-based biosensing and bioimaging systems containing ultrathin luminous layers. The different enhancement efficiencies for multiwavelengths were successfully obtained through various emission angles in light of the wavelength resolution of SPCE, thus verifying the existence and importance of energy-matching coupling, and the emission for the fluorophore with low excitation efficiency could also be detected. Benefiting from this, the Au NPL-modulated SPCE system could be a candidate for simultaneous multiwavelength enhancement and high-throughput detection in multicomponent analysis.

Sensitivity-improved SERS detection of SARS-CoV-2 spike protein by Au NPs/COFs integrated with catalytic-hairpin-assembly amplification technology

BACKGROUND

The COVID-19 pandemic, caused by the novel coronavirus, has had a profound impact on global health and economies worldwide. This unprecedented crisis has affected individuals, communities, and nations in diverse manners. Developing simple and accurate diagnostic methods is an imperative task for frequent testing to mitigate the spread of the virus. Among these methods, SARS-CoV-2 antigen tests in clinical specimens have emerged as a promising diagnostic method for COVID-19 due to their sensitive and accurate detection of spike (S) protein, which plays a crucial role in viral infection initiation.

RESULTS

In this work, a dual-signal amplification surface enhanced Raman scattering (SERS)-based S protein biosensor was constructed based on Au NPs/COFs and enzyme-free catalytic hairpin assembly (CHA) amplification method. The approach relies on a released free DNA sequence (T), which is generated from the competition reaction between Aptamer/T and Aptamer/S protein, to trigger a CHA reaction. Due to the high binding affinity and selectivity between the S protein and its aptamer, CHA process was triggered with the maximum SERS tags (H2-conjugated Au@4-mercaptobenzonitrile@Ag) anchored onto Au NPs/COFs substrate surface. This SERS platform could detect the S protein at concentrations with high sensitivity (limit of detection = 3.0 × 10-16 g/mL), wide detection range (1 × 10-16 to 1 × 10-11 g/mL), acceptable reproducibility (relative standard deviation = 7.01 %) and excellent specificity. The biosensor was also employed to detect S protein in artificial human salivas.

SIGNIFICANCE

Thus, this study not only developed a novel Au NPs/COFs substrate exhibiting strong SERS enhancement ability and high reproducibility, but also proposed a promising dual-signal amplification SERS-based diagnostic method for COVID-19, holding immense potential for the detection of a wide range of antigens and infectious diseases in future applications.

Real-time tunable notched waveguide based on voltage controllable ferroelectric resonator

In the present study, we have devised and conducted an investigation into a real-time tunable notched waveguide, employing a voltage-controllable plasmonic resonator. This plasmonic resonator is meticulously engineered from a ferroelectric substrate featuring a compound multilayer structure, thereby conferring it with the remarkable capability of flexible permittivity control. Furthermore, we have implemented two non-intersecting Archimedean spiral electrodes on the surface of the ferroelectric substrate, dedicated to applying the bias field onto the controllable plasmonic ferroelectric resonator (CPFR). Notably, our system affords the capability to finely tune both the magnetic and electric modes, achieving precise adjustments of 8.7% and 11%, respectively. The performance is complemented by minimal insertion loss, rapid response times, and a broad range of potential applications, positioning it as a candidate for a diverse array of notched waveguide scenarios.

Preparation and Application of Magnetic Molecularly Imprinted Plasmonic SERS Composite Nanoparticles

Magnetic molecularly imprinted polymers (MMIPs) are used as artificial antibody materials. MMIPs have attracted a great deal of interest because of their low cost, wide practicality, predetermination, stability and their ability to achieve rapid separation from complex sample environments by the action of external magnetic field. MMIPs can simulate the natural recognition of entities. They are widely used because of their great advantages in terms of high selectivity. In this review article, the preparation methods of Fe3O4 NPs and a detailed summary of the commonly used methods for amination modification of Fe3O4 NPs are introduced, preparation of Ag NPs of different sizes and Au NPs of various shapes and preparation methods of magnetic molecularly imprinted plasmonic SERS composite nanoparticles such as Fe3O4@Ag NPs, Fe3O4/Ag NPs, Fe3O4@Au NPs, Fe3O4/Au NPs, Fe3O4@Au/Ag NPs and Fe3O4@Ag@Au NPs are main summarized. In addition, preparation process and the current application of MMIPs prepared from magnetic molecularly imprinted plasmonic SERS composite nanoparticles incorporating different functional monomers in a nuclear-satellite structure are also presented. Finally, the existing challenges and future prospects of MMIPs in applications are discussed.

Femtosecond Autocorrelation of Localized Surface Plasmons

Plasmon electronic dephasing lifetime is one of the most important characteristics of localized surface plasmons, which is crucial both for understanding the related photophysics and for their applications in photonic and optoelectronic devices. This lifetime is generally shorter than 100 fs and measured using the femtosecond pump-probe technique, which requires femtosecond laser amplifiers delivering pulses with a duration even as short as 10 fs. This implies a large-scale laser system with complicated pulse compression schemes, introducing high-cost and technological challenges. Meanwhile, the strong optical pulse from an amplifier induces more thermal-related effects, disturbing the precise resolution of the pure electronic dephasing lifetime. In this work, we use a simple autocorrelator design and integrate it with the sample of plasmonic nanostructures, where a femtosecond laser oscillator supplies the incident pulses for autocorrelation measurements. Thus, the measured autocorrelation trace carries the optical modulation on the incident pulses. The dephasing lifetime can be thus determined by a comparison between the theoretical fittings to the autocorrelation traces with and without the plasmonic modulation. The measured timescale for the autocorrelation modulation is an indirect determination of the plasmonic dephasing lifetime. This supplies a simple, rapid, and low-cost method for quantitative characterization of the ultrafast optical response of localized surface plasmons.

Challenges and opportunities for SERS in the infrared: materials and methods

In the wake of a global, heightened interest towards biomarker and disease detection prompted by the SARS-CoV-2 pandemic, surface enhanced Raman spectroscopy (SERS) positions itself again at the forefront of biosensing innovation. But is it ready to move from the laboratory to the clinic? This review presents the challenges associated with the application of SERS to the biomedical field, and thus, to the use of excitation sources in the near infrared, where biological windows allow for cell and through-tissue measurements. Two main tackling strategies will be discussed: (1) acting on the design of the enhancing substrate, which includes manipulation of nanoparticle shape, material, and supramolecular architecture, and (2) acting on the spectral collection set-up. A final perspective highlights the upcoming scientific and technological bets that need to be won in order for SERS to stably transition from benchtop to bedside.

Plate-Like Colloidal Metal Nanoparticles

The pseudo-two-dimensional (2D) morphology of plate-like metal nanoparticles makes them one of the most anisotropic, mechanistically understood, and tunable structures available. Although well-known for their superior plasmonic properties, recent progress in the 2D growth of various other materials has led to an increasingly diverse family of plate-like metal nanoparticles, giving rise to numerous appealing properties and applications. In this review, we summarize recent progress on the solution-phase growth of colloidal plate-like metal nanoparticles, including plasmonic and other metals, with an emphasis on mechanistic insights for different synthetic strategies, the crystallographic habits of different metals, and the use of nanoplates as scaffolds for the synthesis of other derivative structures. We additionally highlight representative self-assembly techniques and provide a brief overview on the attractive properties and unique versatility benefiting from the 2D morphology. Finally, we share our opinions on the existing challenges and future perspectives for plate-like metal nanomaterials.

High-sensitivity long-range surface plasmon resonance sensing assisted by gold nanoring cavity arrays and nanocavity coupling

In many of the existing refractive index (RI) sensing works, only the shape and size of plasmonic structures are usually taken into account, while the parameters of spacer layers are ignored. In this publication, we explored the long-range surface plasmon resonance (LRSPR) and Fabry-Pérot resonance coupling effects of our proposed gold nanoring cavity array/spacer layer/Au mirror/glass substrate. Both the RI sensitivity and full width at half-maximum (FWHM) values were superior than those of conventional surface plasmon resonance substrates. We discussed the tunability of the RI sensitivity through changing the RI and thickness of the spacer layer. Then, under the optimized parameter conditions of the spacer layer, the geometry parameters (including size, gap and periodicity) of gold nanoring cavity arrays were tuned to optimize the best RI sensitivity. Finally, we broke the structural symmetry of a nanoring cavity to introduce Fano resonances into our system, and a high RI sensitivity and figure-of-merit (FOM) of 695 nm per RIU (refractive index unit) and 96.5, respectively, were achieved when the breaking angle θ was 30°. This study opens up many possibilities for boosting the FOM of RI sensing by taking into account the hybridization effects of localized surface plasmon resonance, LRSPR, and Fabry-Pérot and Fano resonances.

A combined surface-enhanced Raman spectroscopy (SERS)/colorimetric approach for the sensitive detection of malondialdehyde in biological samples

Variations of malondialdehyde (MDA) level in biological samples often induce pathological changes, which is associated with various diseases. Here, we developed a combined surface-enhanced Raman spectroscopy (SERS) and colorimetric strategy for MDA quantitation. The methodology is based on the condensation reaction between 4-aminothiophenol (4-ATP)-modified Au nanoflowers (Au NFs) with the aldehyde groups of MDA, which causes the aggregation of the Au NFs and a concomitant change in the solution color from purple to blue and shifts in the local surface plasmon resonance band to longer wavelengths compared with monodisperse NFs. Additionally, after the condensation reaction, a new Raman peak ascribable to the CN vibration appeared at 1630 cm^-1. The intensity of this peak was directly related to the concentration of MDA in solution, which allowed establishing the quantitative measurement of MDA based on SERS. The developed SERS assay displayed satisfactory sensitivity and selectivity with a broad linear range from 1.0 × 10^-12 to 1.0 × 10^-7 M and a low detection limit (∼3.6 × 10^-13 M), outperforming other reported optical and electrochemical methods. Furthermore, the use of 4-ATP-modified Au NF probes to monitor MDA in human serum demonstrates the applicability of this combined SERS/colorimetric approach in a real environment.

SERS Sensing Using Graphene-Covered Silver Nanoparticles and Metamaterials for the Detection of Thiram in Soil

Multilayer hyperbolic metamaterial (HMM)-based SERS substrates have received special consideration because they accommodate various propagation modes such as surface plasmonic polaritons (SPP). However, the SPP modes are difficult to generate in HMM due to their weak electric field enhancement. In this article, we designed novel SERS substrates consisting of graphene-covered AgNPs and HMM. The graphene-covered AgNPs work as an external coupling structure for hyperbolic metamaterials due to this structure exhibiting significant plasmonic effects as well as unique optical features. The localized surface plasmonic resonance (LSPR) of the graphene-covered AgNPs excited the SPP and thus formed a strong hot spot zone in the nanogap area of the graphene. The Raman experiment was performed using rhodamine 6G (R6G) and crystal violet (CV), which showed high stability and a maximum enhancement factor of 2.12 × 10⁸. The COMSOL simulation further clarified that enhanced SERS performance was due to the presence of monolayer graphene and provided an atomically flat surface for organic molecules in a more controllable manner. Interestingly, the proposed SERS structure carries out quantitative detection of thiram in soil and can satisfy the basic environmental need for pesticide residue in the soil.

Triangular gold nanoplates/two-dimensional nano mica platelets with a 3D lightning-rod effect as flexible nanohybrid substrates for SERS bacterial detection

Triangular gold nanoplates (TAuNPs) were prepared by a one-step rapid growth method and then reduced and stabilized on two-dimensional nano mica nanoplatelets (NMPs). We also prepared TAuNP/NMP nanohybrids with a three-dimensional lightning-rod effect by oxidative etching. The surface of the delaminated NMPs (only 1 nm thick) is highly charged and can provide a large specific surface area; thus, it can be used as a substrate for the stable growth of gold nanoplates. In addition, by controlling relevant synthesis parameters, the edge length of the TAuNPs can be easily adjusted in the range of 30-90 nm. During reduction of the TAuNPs, the cationic surfactant cetyltrimethylammonium chloride was added as a protective agent to surround the TAuNPs; consequently, the surface was positively charged, which facilitates adsorption for detecting molecules with negative charges. When nanohybrids were used in surface-enhanced Raman spectroscopy (SERS) to detect adenine molecules, the limit of detection concentration was 10^-9 M. The Raman enhancement factor was 5.7 × 10⁷, and the relative standard deviation (RSD) was 9.8%. Finally, this method was applied to the biological detection of Staphylococcus aureus, and the surface charge and hydrophilic properties of the material significantly improved the SERS signal of S. aureus. The limit of detection concentration was 10² CFU mL^-1, and the RSD was 11.2%. The TAuNP/NMP nanohybrids can provide very rapid and sensitive SERS detection of biomolecules.

In Situ Surface-Enhanced Raman Scattering Detection of a SARS-CoV-2 Biomarker Using Flexible and Transparent Polydimethylsiloxane Films with Embedded Au Nanoplates

Coronavirus disease 2019 (COVID-19) remains an ongoing issue worldwide and continues to disrupt daily life. Transmission of infection primarily occurs through secretions when in contact with infected individuals, but more recent evidence has shown that fomites are also a source of virus transmission, especially in cold-chain logistics. Traditional nucleic acid testing for severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) contamination in cold-chain logistics is time-consuming and inaccurate because of the multiplex sampling sites. Surface-enhanced Raman spectroscopy (SERS) provides a rapid, sensitive, and label-free detection route for various molecules, including viruses, through the identification of the characteristic peaks of their outer membrane proteins. In this study, we embedded arbitrarily orientated gold nanoplates (Au NPLs) in polydimethylsiloxane (PDMS) elastomer and used it as biosensor for the ultrasensitive detection of the SARS-CoV-2 spike protein in cold-chain logistics. This transparent and flexible substrate can be wrapped onto arbitrary surfaces and permits light penetration into the underlying contact surface, enabling in situ and point-of-care SERS diagnostics. The developed assay displayed high reproducibility (8.7%) and a low detection limit of 6.8 × 10-9 g mL-1, indicating its potential to serve as a promising approach with increased accuracy and sensitivity for the detection of the S protein.