Understanding Interfacial Nanoparticle Organization through Simulation and Theory: A Review

Entropy-favorable adsorption of polymer-grafted nanoparticles at fluid-fluid interfaces

The adsorption of polymer-grafted nanoparticles at interfaces is a problem of fundamental interest in physics and soft materials. This adsorption behavior is governed by the interplay between interaction potentials and entropic effects. Here, we use molecular dynamics simulations and umbrella sampling methods to study the adsorption behavior of a Janus-like homopolymer-grafted nanoparticle at fluid-fluid interfaces. By calculating the potential of the mean force as the particle moves from fluid A to the interface, the adsorption energy Ea can be obtained. When two homopolymer chains with types A and B are grafted to the opposite poles of the particle, Ea shows a scaling behavior with respect to chain length N: Ea ∝ N0.598. This is determined by the interactions between polymers and fluids. The enthalpy dominates, and the entropy effects mainly come from the rotational entropy loss of the polymer-grafted nanoparticle at interfaces, which disfavors the stabilization of particles at interfaces. When the grafted polymer number m is large, the adsorption energy exhibits a linear dependence on m. While the enthalpy dominates the behavior, the entropy becomes significant at a larger chain length of N = 15, where the configurational entropy of the polymer chains dominates the entropy of the system. The globule-coil transition occurs when polymers move from poor solvents to good solvents, increasing the configurational entropy and favoring the stabilization of particles at interfaces. Our study provides novel insights into the stabilization mechanism of polymer-grafted nanoparticles at interfaces and reveals the stabilization mechanism favored by the configurational entropy of grafted polymer chains.

Silkworm pupae protein co-degradation by magnetic nanoparticles immobilized proteinase K and Mucor circinelloides aspartic protease for further utilization of sericulture by-products

Silkworm pupae, by-product of sericulture industry, is massively discarded. The degradation rate of silkworm pupae protein is critical to further employment, which reduces the impact of waste on the environment. Herein, magnetic Janus mesoporous silica nanoparticles immobilized proteinase K mutant T206M and Mucor circinelloides aspartic protease were employed in the co-degradation. The thermostability of T206M improved by enhancing structural rigidity (t1/2 by 30 min and T50 by 5 °C), prompting the degradation efficiency. At 65 °C and pH 7, degradation rate reached the highest of 61.7%, which improved by 26% compared with single free protease degradation. Besides, the immobilized protease is easy to separate and reuse, which maintains 50% activity after 10 recycles. Therefore, immobilized protease co-degradation was first applied to the development and utilization of silkworm pupae resulting in the release of promising antioxidant properties and reduces the environmental impact by utilizing a natural and renewable resource.

Seeing the Supracolloidal Assemblies in 3D: Unraveling High-Resolution Structures Using Electron Tomography

Transmission electron microscopy (TEM) imaging has revolutionized modern materials science, nanotechnology, and structural biology. Its ability to provide information about materials' structure, composition, and properties at atomic-level resolution has enabled groundbreaking discoveries and the development of innovative materials with precision and accuracy. Electron tomography, single particle reconstruction, and microcrystal electron diffraction techniques have paved the way for the three-dimensional (3D) reconstruction of biological samples, synthetic materials, and hybrid nanostructures at near atomic-level resolution. TEM tomography using a series of two-dimensional (2D) projections has been used extensively in biological science, but in recent years it has become an important method in synthetic nanomaterials and soft matter research. TEM tomography offers unprecedented morphological details of 3D objects, internal structures, packing patterns, growth mechanisms, and self-assembly pathways of self-assembled colloidal systems. It complements other analytical tools, including small-angle X-ray scattering, and provides valuable data for computational simulations for predictive design and reverse engineering of nanomaterials with the desired structure and properties. In this perspective, I will discuss the importance of TEM tomography in the structural understanding and engineering of self-assembled nanostructures with specific emphasis on colloidal capsids, composite cages, biohybrid superlattices with complex geometries, polymer assemblies, and self-assembled protein-based superstructures.

Affinity-assisted covalent self-assembly of PduQ-SpyTag and Nox-SpyCatcher to construct multi-enzyme complexes on the surface of magnetic microsphere modified with chelated Ni2

It is of great significance to study the effect of multi-enzyme aggregation behavior at the interface on the formation of multi-enzyme complexes and their co-catalytic characteristics, which is helpful for us to design and construct immobilized multi-enzyme complex systems for in vitro synthetic biology. Here, a magnetic microsphere with chelated Ni2+, was prepared to explore the self-assembly characteristics of PduQ-SpyTag (P-T) and Nox-SpyCatcher (NC) on its surface, based on the mixed interaction mode consisting the affinity of His-tag/Ni2+ and covalent binding of SpyTag/SpyCatcher. After studying the effect of saturated or unsaturated adsorption of P-T on the covalent binding between P-T and NC at the interface, a possible multienzyme interaction mechanism for the affinity-assisted covalent self-assembly on the Ni2+ chelating surface was proposed. The time evolution of NADH showed that the immobilized P-T/N-C complex formed by this method and the free P-T/N-C complex exhibited similar synergistic catalytic properties, and presented higher catalytic efficiency than the simple mixing of P-T and NC. The optimal catalytic conditions, stability and reusability of the immobilized multi-enzyme complexes prepared in this study were also discussed by comparing them with free enzymes. In this study, we demonstrate a simple and effective strategy for self-assembling SpyTag/SpyCatcher fusion proteins on the surface of magnetic beads, which is inspiring for the construction of more cascade enzyme systems at the interface. It provides a new method for facilitating the rapid construction of immobilized multi-enzyme complexes in vitro from the crude cell lysis.

Molecular Dynamics Simulation of the Effects of Complex Surfactants on Oil-Water Interaction and Aggregation Characteristics at the Interface

In response to the problem of complex interaction between oil and water in the oil-water interface, especially heavy oil and water, this study investigated the effects of complex surfactants on the interaction of two phases and their aggregation characteristics by molecular dynamics simulation. The results showed that increasing the content of sodium lauryl polyether carboxylate (AEC-9Na) was beneficial to the coordination between it and alkyl glycoside (APG-10), improved the interfacial activity, and enhanced the interfacial stability of the composite system, and the best effect was achieved when AEC-9Na:APG-10 = 8:2. The thickness of the oil and water film on the oil-water interface was irregular. When the concentration of AEC-9Na was lower than that of APG-10, the total thickness of the interfacial film (ttotal) first increased. When the content of AEC-9Na is higher, a large number of sodium ions were adsorbed near the -COO- group of AEC-9Na, which will polarize out of the hydration layer structure and attract water molecules from the second hydration layer on the heavy oil surface to the first hydration layer through electrostatic interaction. Then, the thickness of the interface film was compressed, and the interface film was reduced. When the ratio increased to 10:0, the oil and water phase competed to adsorb surfactant molecules, and the headgroup tended to lay on the interface. Moreover, the hydrophilicity of the surfactant layer was weakened, and the thickness of the water film decreased. The distribution of surfactant was looser than 8:2, the light components of heavy oil molecules (saturated and aromatic hydrocarbons) entered the gap between surfactants in large quantities, and the hydrophobic tail chain tended to be laid on the oil-water interface. The oleophilicity of the surfactant layer increased, and the thickness of the oil film remarkably increased, so the total thickness of the interface film increased again.

Janus Ligand-Tethered Nanoparticles at Liquid-Liquid Interfaces

We investigate the structural properties of Janus ligand-tethered nanoparticles at liquid-liquid interfaces using coarse-grained molecular dynamics simulations. The effect of interactions between different chains and liquids is discussed. We consider the Janus particles with symmetrical interactions with the liquids which correspond to supplementary wettability and particles with uncorrelated interactions. Simulation results indicate that the Janus hairy particles trapped in the interface region have different configurations characterized by the vertical displacement distance, the orientation of the Janus line relative to the interface, and the particle shape. The Janus hairy particles present abundant morphologies, including dumbbell-like and typical core-shell, at the interface. The shape of adsorbed particles is analyzed in detail. The simulation data are compared with those predicted by a simple phenomenological approach. This work can promote the applications of Janus hairy particles in nanotechnology.