Laser-Enabled Surface Treatment of Disposable Endoscope Lens with Superior Antifouling and Optical Properties

Understanding the role of infusing lubricant composition in the interfacial interactions and properties of slippery surface

Liquid-infused surfaces (LISs) have attracted tremendous attention in recent years owing to their excellent surface properties, such as self-cleaning and anti-fouling. Understanding the effect of lubricant composition on LIS performance is of vital importance, which will help establish the criteria to choose suitable infusing lubricants for specific applications. In this work, the role of chemical composition of lubricant in the properties of LISs was investigated. The apparent water contact angle θapp was dependent on the temperature and beeswax/silicone oil ratio. Nevertheless, the trend of moving velocity of water drop on the tilted LISs did not follow that of θapp at 20 °C and 37 °C, which was attributed to the increased lubricant viscosity with beeswax/silicone oil ratio. At 60 °C, the drop velocity and θapp shared the similar variation trend with beeswax/silicone oil ratio, highlighting the significant role of chemistry of the components in beeswax. The alkanes and fatty acids promoted the drop movement, while the fatty acid esters impeded the movement. The interaction forces between water drop and lubricant surfaces were measured using atomic force microscopy. It was demonstrated that the interaction between water drop and lubricant was not the only factor to control the drop movement, while the interaction between lubricant and substrate as well as of lubricant itself also determined the movement. When the adhesions of water-lubricant and lubricant-substrate were similar for different lubricants, the influence of cohesion of lubricant became significant. This work provides useful insights into the fundamental understanding of the interfacial interactions of test drop, infusing lubricant and solid substrate of LISs, and the effect of infusing lubricant composition on the LIS performance.

Femtosecond laser printing-assisted etching tailored hard and brittle micro-convex surface

We report a femtosecond laser print-assisted dry etching technology for high-efficiency, high-quality, and tailored fabricating of a micro-convex surface (MCS) on hard and brittle materials. Liquid ultraviolet curing adhesive (UVCA) was transferred from a donor substrate to a receiving substrate by femtosecond laser-induced forward transfer, and the transferred microdroplet spontaneously has a smooth surface under the action of surface tension. And then an MCS with a high-quality surface was formed on hard and brittle materials by UV curing and dry etching. The effects of laser parameters and receiving substrate surface free energy on MCS morphology were investigated. According to the variation of the numerical aperture, the two methods to change the morphology of the MCS were divided into independent/joint regulation of diameter and height. We showed that a hexagonal array containing a variety of MCS morphologies can be fabricated on a fused silica by setting the appropriate parameters. And the fabrication time of an MCS in a large-area array was only 1.1 s.

Bio-Based Waterborne Polyurethane Coatings with High Transparency, Antismudge and Anticorrosive Properties

Green and environment-friendly preparation are of the utmost relevance to the development of transparent antismudge coatings. To prepare a waterborne polyurethane (WPU) coating with antismudge property, it is challenging to balance the stability of dispersion and the antismudge property of coating. Herein, we prepare a transparent bio-based WPU coating grafted with a minor proportion of poly(dimethylsiloxane) (WPU-g-PDMS) using renewable castor oil, monocarbinol-terminated PDMS, hexamethylene diisocyanate trimer, and 2,2-bis(hydroxymethyl)propionic acid as raw materials. Effects of the dosage of monocarbinol-terminated PDMS, the curing temperature, and the curing time on the antismudge performance were studied. Results showed that rigorous stirring (3000 rpm) is necessary to obtain a stable WPU-g-PDMS dispersion with a storage time longer than 6 months. A high curing temperature (>160 °C) and a period of curing time (>1 h) are indispensable to obtain the excellent antismudge property because they would facilitate the grafted low-surface-tension PDMS chains to migrate from the interior to the coating surface. The facts that simulated contaminated liquids such as water, HCl solution, NaOH solution, artificial blood, and tissue fluid could slide off easily and cleanly, and marker ink lined on the coating surface could shrink, indicated that the WPU-g-PDMS coating has good antismudge properties, which could be self-compensated shortly after deterioration. Due to the high cross-linking degree caused by multifunctional polyol and isocyanate, the WPU-g-PDMS coating has high hardness and good anticorrosive performance. The antismudge functionalization and waterborne technology of bio-based polyurethane coatings proposed in this work could be a promising contribution to the green and sustainable development of functional coatings. This kind of WPU-g-PDMS coating is expected to protect and decorate electronic screens, vehicles, and buildings, especially endoscopes.