Active Acetylcholinesterase Immobilization on a Functionalized Silicon Surface

Chemically Bonded Pepsin via Its Inert Center to Diazo Functionalized Silica Gel through Multipoint Attachment Mode: A Way of Restoring Biocatalytic Sustainability over "Wider pH" Range

Proteolytic enzymes play a pivotal role in the industry. Still, because of denaturation, the extensive applicability at their level of best catalytic efficiency over a more comprehensive pH range, particularly in alkaline conditions over pH 8, has not been fully developed. On the other hand, enzyme immobilization following a suitable protocol is a long pending issue that determines the conformational stability, specificity, selectivity, enantioselectivity, and activity of the native enzymes at long-range pH. As a bridge between these two findings, in an attempt at a freezing temperature 273-278 K at an alkaline pH, the diazo-functionalized silica gel (SG) surface has been used to rapidly diazo couple pepsin through its inert center, the O-carbon of the phenolic -OH of surface-occupied Tyr residues in a multipoint mode: when all the various protein groups, viz., amino, thiol, phenol, imidazole, carboxy, etc., in the molecular sequence including those belonging to the active sites, remain intact, the inherent inbuilt interactions among themselves remain. Thereby, the macromolecule's global conformation and helicity preserve the status quo. The dimension of the SG-enzyme conjugate confirms as {Si(OSi)4 (H2O)1.03}n {-O-Si(CH3)2-O-C6H4-N═N+}4·{pepsin}·yH2O; where the values of n and y have been determined respectively as 347 and 188. The material performs the catalytic activity much better at 7-8.5 than at pH 2-3.5 and continues for up to six months without any appreciable change.

Capsular polysaccharide-amikacin nanoparticles for improved antibacterial and antibiofilm performance

Natural nanoscale polysaccharide and its application have attracted much attention in recent years. In this study, we report for the first time that a novel naturally occurring capsular polysaccharide (CPS-605) from Lactobacillus plantarum LCC-605, which can self-assemble into spherical nanoparticles with an average diameter of 65.7 nm. To endow CPS-605 with more functionalities, we develop amikacin-functionalized capsular polysaccharide (CPS) nanoparticles (termed CPS-AM NPs) with improved antibacterial and antibiofilm activities against both Escherichia coli and Pseudomonas aeruginosa. They also exhibit faster bactericidal activity than AM alone. The high local positive charge density of CPS-AM NPs facilitates the interaction between the NPs and bacteria, leading to extraordinary bactericidal efficiencies (99.9 % and 100 % for E. coli and P. aeruginosa, respectively, within 30 min) by damaging the cell wall. Very interestingly, CPS-AM NPs exhibit an unconventional antibacterial mechanism against P. aeruginosa, that is, they can induce plasmolysis, along with bacterial cell surface disruption, cell inclusion release and cell death. In addition, CPS-AM NPs exhibit low cytotoxicity and negligible hemolytic activity, showing excellent biocompatibility. The CPS-AM NPs provide a new strategy for the design of next-generation antimicrobial agents that can reduce the working concentration of antibiotics to fight against bacterial resistance.

Multipoint Immobilization at Inert Center of Papain on Homo-Functional Diazo-Activated Silica Support: A Way of Restoring "Above Room-Temperature" Bio-Catalytic Sustainability

Although enzymes play a significant role in industrial applications, their potential usage at high-level efficiency, particularly above room temperature, has not yet been fully harnessed. It brings above room-temperature catalytic sustainability of an immobilized (imm.) bio-catalyst as a long pending issue to improve enzyme stability, activity, specificity, or selectivity, particularly the enantio-selectivity over the native-enzymes. At this juncture, in a robust methodology, a heterogeneous solid phase bio-catalyst, {Si(OSi)₄(H₂O)_1.03}_n=328{OSi(CH₃)₂-NH-C₆H₄-N═N}₄{papain}(H₂O)₂₅₁, has efficiently been prepared by immobilizing papain on homo-functionalized SG (silica-gel) via multipoint covalent attachment. The bio-catalyst is easy to be recovered and reused multiple times. The homo-functional -N═N⁺, which appears on the SG-surface, makes the multipoint diazo-links with the inert center of the tyrosine-moiety to couple the enzyme where all the amino, thiol, phenol, and so forth, groups of the protein, including those that belong to the active-site, remain intact. The immobilized enzyme (13.9 μmol g^-1) swims in pore-water within the pore-channel, remains stable up to 70 ± 5 °C, and exhibits wider temperature adaptability in performing its hydrolyzing activities. The relative activity, 78 ± 2% at 27 °C, remains quantitative for 60 days and can be reused for 60 cycles with 53% activity at room-temperature. The thermal (relative activity: 87%; incubated at 70 ± 5 °C for 24 h) and mechanical (relative activity: 92%; incubated at 2500 rpm for 2 h at 27 °C) stability was outstanding.

Nanoassemblies of acetylcholinesterase and β-lactamase immobilized on magnetic nanoparticles as biosensors to detect pollutants in water

The use of enzymes immobilized on magnetic nanoparticles to detect contaminants in aqueous samples has gained interest, since it allows the magnetic control, concentration and reuse of the enzymes. In this work, the detection of trace amounts of organophosphate pesticides (chlorpyrifos) and antibiotics (penicillin G) in water was attained by developing a nanoassembly formed by either inorganic or biomimetic magnetic nanoparticles used as substrates to immobilize acetylcholinesterase (AChE) and β-lactamase (BL). Other than the substrate, the optimization of the nanoassembly was done by testing enzyme immobilization both through electrostatic interaction (also reinforced with glutaraldehyde) and covalent bonds (by carbodiimide chemistry). Temperature (25 °C), ionic strength (150 mM NaCl) and pH (7) were set to ensure enzymatic stability and to allow both the nanoparticles and the enzymes to present ionic charges that would allow electrostatic interaction. Under these conditions, the enzyme load on the nanoparticles was ⁓0.1 mg enzyme per mg nanoparticles, and the preserved activity after immobilization was 50-60% of the specific activity of the free enzyme, being covalent bonding the one which yielded better results. Covalent nanoassemblies could detect trace concentrations of pollutants down to 1.43 nM chlorpyrifos and 0.28 nM penicillin G. They even permitted the quantification of 14.3 μM chlorpyrifos and 2.8 μM penicillin G. Also, immobilization conferred higher stability to AChE (⁓94% activity after 20 days storage at 4 °C) and allowed to reuse the BL up to 12 cycles.

Multipoint Immobilization at the Inert Center of Urease on Homofunctional Diazo-Activated Silica Gel: A Way of Restoring Room-Temperature Catalytic Sustainability for Perennial Utilization

At present, enzyme immobilization is a big issue. It improves enzyme stability, activity, specificity, or selectivity, particularly the enantioselectivity compared to the native enzymes, and by solving the separation problem, it helps in recovering the catalyst with good reusability as desired in vitro. Motivated by these facts, in this work, Jack bean urease (JBU) is immobilized on three-dimensional (3D)-network silica gel (SG) via multipoint covalent bonding employing dimethyldichlorosilane (DMDCS) and p-nitrophenol, respectively, as the second-generation silane-coupling reagent and spacer. The homofunctional diazo group appearing at the functionalized SG unit cell makes a diazo linkage at the inert center, the ortho position of the phenolic-OH of the tyrosine moiety, where all of the amino, thiol, phenol, imidazole, carboxy, etc., groups of the enzyme residues, including those that belong to the active site, remain intact. The coupling process, analyzed using field emission scanning electron microscopy (FESEM), energy-dispersive X-ray analysis (EDX), X-ray photoelectron spectroscopy (XPS), Fourier transform infrared (FT-IR) spectroscopy, ultraviolet-visible spectroscopy (UV-vis), and fluorescence spectroscopy, occurs without molecular aggregation in borate buffer at pH 8.8 ± 0.4, which is much higher than the iso-electric point (pH 5.1) of the macromolecule where it becomes soluble. Eventually, the immobilization is maximize and also the native-enzyme activities are restored remarkably. The immobilized catalyst converts urea (0.0625-0.15 mmol L^-1) to ammonia appreciably (94.50 ± 1.5%) at 27 °C, and the efficiency is well comparable to that of the native enzyme (93.0 ± 0.4%). The efficiency gradually diminishes, coming down to 50% at the 40th cycle, and the enzyme returns to its native conformation within 72 h in tris-EDTA borate buffer at 27 °C for the next 40 cycles of reuse and so on. The efficiency becomes hindered by 8-10% in every 5th subsequent reuse to reach 50% on the 30th reuse, resulting in room-temperature catalytic sustainability of 90 days. The catalytic performances are well restored in rice extract and coconut water.

A novel construct of an electrochemical acetylcholinesterase biosensor for the investigation of malathion sensitivity to three different insect species using a NiCr2O4/g-C3N4 composite integrated pencil graphite electrode

Herein, an electrochemical biosensor has been prepared to assess the sensitivity of an organophosphate insecticide, malathion, to acetylcholinesterase (AChE) enzyme of three insects including Apis mellifera (honeybee), Tribolium castaneum (red flour beetle), and Zootermopsis nevadensis (dampwood termite). A composite of nickel chromite (NiCr₂O₄) and graphitic carbon nitride (g-C₃N₄) was prepared and characterized for its morphological, chemical and electrical properties. The NiCr₂O₄/g-C₃N₄ composite integrated pencil graphite electrodes were used to covalently immobilize insect AChE enzymes and amperometric response of bioelectrodes was determined through cyclic voltammetry. The prepared bioelectrodes exhibited high enzyme immobilization efficiency and electro-catalytic performance. The integrated bioelectrodes could efficiently detect malathion induced inhibition of insects' AChEs. The linear ranges for malathion were found to be 0.1–1.6 μM, 1–40 nM and 2–100 nM, and LODs were 2 nM, 0.86 nM and 2.3 nM for A. mellifera, T. castaneum, and Z. nevadensis, respectively. Additionally, the biosensing platform developed using A. mellifera AChE was found highly sensitive and effective for malathion recoveries from spiked wheat flour samples with high recovery rates. Moreover, the proposed method was adequately reproducible and selective. The results revealed that A. mellifera AChE is less sensitive to inhibition by malathion as compared to T. castaneum, and Z. nevadensis AChE. The experimental results were validated through computational docking of malathion with insect AChEs and the results were in correspondence to experimental outcomes. The proposed method can be a plausible alternate to conventional analytical methods to assess the pesticide sensitivity and toxicity of various compounds against insect enzymes.

An innovative electrochemical assay has been established to determine pesticide sensitivity against acetylcholinesterase and possible toxicity against insects. The analytical efficiency of three common insect AChEs was determined through this method.

Formation and Characterization of a Stable Monolayer of Active Acetylcholinesterase on Planar Gold

Enzyme activity is the basis for many biosensors where a catalytic event is used to detect the presence and amount of a biomolecule of interest. To create a practical point-of-care biosensor, these enzymes need to be removed from their native cellular environments and immobilized on an abiological surface to rapidly transduce a biochemical signal into an interpretable readout. This immobilization often leads to loss of activity due to unfolded, aggregated, or improperly oriented enzymes when compared to the native state. In this work, we characterize the formation and surface packing density of a stable monolayer of acetylcholinesterase (AChE) immobilized on a planar gold surface and quantify the extent of activity loss following immobilization. Using spectroscopic ellipsometry, we determined that the surface concentration of AChE on a saturated Au surface in a buffered solution was 2.77 ± 0.21 pmol cm^-2. By calculating the molecular volume of hydrated AChE, corresponding to a sphere of 6.19 nm diameter, divided by the total volume at the AChE-Au interface, we obtain a surface packing density of 33.4 ± 2.5% by volume. This corresponds to 45.1 ± 3.4% of the theoretical maximum monolayer coverage, assuming hexagonal packing. The true value, however, may be larger due to unfolding of enzymes to occupy a larger volume. The enzyme activity and kinetic measurements showed a 90.6 ± 1.4% decrease in specific activity following immobilization. Finally, following storage in a buffered solution for over 100 days at both room temperature and 4 °C, approximately 80% of this enzyme activity was retained. This contrasts with the native aqueous enzyme, which loses approximately 75% of its activity within 1 day and becomes entirely inactive within 6 days.

Localized Surface Plasmon Resonance-Based Colorimetric Assay Featuring Thiol-Capped Au Nanoparticles Combined with a Mobile Application for On-Site Parathion Organophosphate Pesticide Detection

In this study, we employed a dual strategy for parathion organophosphate pesticide (parathion) detection; first, we used a localized surface plasmon resonance (LSPR)-based colorimetric sensor featuring thiol-capped Au NPs, namely cysteine (Cys)@Au NPs, 11-mercaptoundecanoic acid (11-MUA)@Au NPs, and glutathione (GSH)@Au NPs, via acetylcholinesterase (ACHE) and acetylthiocholine (ATCH) enzyme-mediated hydrolysis reactions; second, we developed a color analysis toxicity-sensing app (Toxin APP). Positively charged thiocholine (TCH) molecules, which were continuously generated via hydrolysis, subsequently conjugated with thiol-capped Au NPs, causing Au NP aggregation through electrostatic attractions. The degree of aggregation of the thiol-capped Au NPs was influenced by parathion concentrations in the range 0 to 10⁸ ppt, because parathion acted as an ACHE inhibitor by controlling the amount of TCH generated. Based on the values of LSPR absorbance ratio, the limits of detection (LODs) of three types thiol-capped Au NPs were determined to be 100 ppt using ultraviolet-visible spectroscopy measurements. However, the aggregation efficiency of GSH@Au NPs was lower than that of the others regarding gradual changes in their color and LSPR absorbance band. Furthermore, we designed Toxin APP for color analysis which consists of three modules: processing, database collection, and communication. Toxin APP could on-site and precisely detect the color changes of GSH@Au NPs at parathion concentrations in the ranges of 100 ppt to 1, 10, and 100 ppm and could distinguish between OP and non-OP pesticides (e.g., fipronil) in tap water samples with high sensitivity and selectivity. Moreover, the concentration of residual parathion in real samples (tomato and strawberry) was quantified based on the color changes of GSH@Au NPs detected using Toxin APP. Therefore, the combination of an LSPR-based colorimetric assay and Toxin APP can be a reliable method for the facile and rapid detection of parathion in food and water samples.

Development of enzymatic electrochemical biosensors for organophosphorus pesticide detection

The enzymatic electrochemical biosensor has the advantages of simple operation, speed, and integration in the detection of organophosphorus pesticide (OPs) residues. It has the potential to become the best alternative to the traditional OP detection technology. This article introduces the OP identification principle of different enzymes, the OP detection mechanism of several common sensors, and the enzyme assembly method. In addition, the article discusses application of nanomaterials in sensor preparation and sensor performance parameters in the past decade. The related content of early sensors is outside the scope of this article.

Ultrasensitive detection of interleukin 1α using 3-phosphonopropionic acid modified FTO surface as an effective platform for disposable biosensor fabrication

In this study, we utilized a carboxyalkylphosphonic acid covered fluorine doped tin oxide (FTO) as an electrode material for fabrication of Interleukin 1α (IL-1α) immunosensor. For this aim, anti-IL-1α antibodies were attached on the 3-phosphonopropionic acid (PHP) modified FTO surface covalently. Electrochemical (electrochemical impedance spectroscopy and cyclic voltammetry) and morphological (scanning electron microscopy and atomic force microscopy) characterizations were performed to monitor the successful fabrication of immunoelectrodes. After incubation of anti-IL-1α antibody immobilized FTO electrodes in IL-1α antigen solutions, increases were seen in impedimetric responses. IL-1α antigen was determined in a linear detection range from 0.02 to 2 pg/mL by EIS. The detection limit of the suggested immunosensor was 6 fg/mL. The applicability of the designed biosensor was tested by using human serum and saliva samples and acceptable results were obtained. In addition, high sensitivity, good specificity, low detection limit made the proposed immunosensor a potential technique for IL-1α antigen determination in routine clinical analysis.

Simulated revelation of the adsorption behaviours of acetylcholinesterase on charged self-assembled monolayers

An acetylcholinesterase (AChE)-based electrochemical biosensor, as a promising alternative to detect organophosphates (OPs) and carbamate pesticides, has gained considerable attention in recent years, due to the advantages of simplicity, rapidity, reliability and low cost. The bio-activity of AChE immobilized on the surface and the direct electron transfer (DET) rate between an enzyme and an electrode directly determined the analytical performances of the AChE-based biosensor, and experimental studies have shown that the charged surfaces have a strong impact on the detectability of the AChE-based biosensor. Therefore, it is very important to reveal the behaviour of AChE in bulk solution and on charged surfaces at the molecular level. In this work, the adsorption orientation and conformation of AChE from Torpedo californica (TcAChE) on oppositely charged self-assembled monolayers (SAMs), COOH-SAM and NH₂-SAM with different surface charge densities, were investigated by parallel tempering Monte Carlo (PTMC) and all-atom molecular dynamics simulations (AAMD). Simulation results show that TcAChE could spontaneously and stably adsorb on two oppositely charged surfaces by the synergy of an electric dipole and charged residue patch, and opposite orientations were observed. The active-site gorge of TcAChE is oriented toward the surface with the "end-on" orientation and the active sites are close to the surface when it is adsorbed on the positively charged surface and the tunnel cost for the substrate is lower than that on the negatively charged surface and in bulk solution, while for TcAChE adsorbed on the negatively charged surface, the active site of TcAChE is far away from the surface and the active-site gorge is oriented toward the solution with a "back-on" orientation. It suggests that the positively charged surface could provide a better microenvironment for the efficient bio-catalytic reaction and quick DET between TcAChE and the electrode surface. Moreover, the RMSD, RMSF, dipole moment, gyration radius, eccentricity and superimposed structures show that only a slight conformational change occurred on the relatively flexible structure of TcAChE during simulations, and the native conformation is well preserved after adsorption. This work helps us better comprehend the adsorption mechanism of TcAChE on charged surfaces and might provide some guidelines for the development of new TcAChE-based amperometric biosensors for the detection of organophosphorus pesticides.

MAPLE Assembled Acetylcholinesterase⁻Polyethylenimine Hybrid and Multilayered Interfaces for Toxic Gases Detection

Developing a controlled method for obtaining hybrid enzymatic-based interfaces for sensing application require the use of a multiuse, reusable sensor. By controlling the interface characteristics in terms of the surface chemistry, thickness, and roughness, a tailored response toward various toxic compounds can be obtained, regarding both materials used as active surfaces and fabrication methods. Herein, we report a preliminary study on using a laser-based method (i.e., matrix-assisted pulsed laser evaporation, or MAPLE) for obtaining active polymeric⁻enzymatic interfaces as hybrid or layered coatings for detecting toxic vapors. The MAPLE fabrication consisted of the simultaneous alternating evaporation of layers of polyethylenimine (PEI) and acetylcholinesterase (AchE) in order to obtain active surfaces as both hybrid PEI-AchE and a PEI/AchE layered coating, respectively. The deposition processes of the polymer and enzyme were carried out using a double-target system and a Nd:YAG pulsed laser, operating at 0.45 J/cm² fluences with a wavelength of 266 nm and a repetition rate of 10 Hz. Fourier transform infrared spectroscopy revealed no significant changes in the functional groups of both hybrid and layered coatings compared with the initial material. The thickness and roughness, as well as the morphologies of the coatings revealed by atomic force microscopy and scanning electron microscopy showed coatings thicker than two μm that had smooth surfaces and average roughness values below six nm. The sensors were tested with simulants for nerve gases and pesticides containing phosphonate ester groups, namely dimethyl methylphosphonate (DMMP) and diisopropyl methylphosphonate (DIMP), and a different sensitivity was shown to the selected chemical agents for each of the sensors. The best sensitivities for DMMP and DIMP obtained by using a PEI-AchE coated sensor are 65 kHz and 200 kHz, respectively, whereas the best sensitivity when using multilayered interfaces is 30 kHz and 10 KHz for DIMP and DMMP, respectively.

Biofunctionalization of Nano Channels by Direct In-Pore Solid-Phase Peptide Synthesis

Diatom biosilica are highly complex inorganic/organic hybrid materials. To get deeper insights on their structure at a molecular level, model systems that mimic the complex natural compounds were synthesized and characterized. A simple and efficient peptide immobilization strategy was developed, which uses a well-ordered porous silica material as a support and commercially available Fmoc-amino acids, similar to the known solid-phase peptide synthesis. As an example, Fmoc-glycine and Fmoc-phenylalanine are immobilized on the silica support. The success of functionalization was investigated by ¹³ C CP MAS and ²⁹ Si CP MAS solid-state NMR. Thermogravimetric analysis (TGA) and elemental analysis (EA) were performed to quantify the functionalization. Changes of the specific surface area, pore volume, and pore diameters in all modification steps were studied by Brunauer-Emmett-Teller based nitrogen adsorption-desorption measurements (BET). The combination of the analytical methods provided high grafting densities of 2.1±0.2 molecules/nm² on the surface. Furthermore, they allowed for monitoring chemical changes on the pore surface and changes of the pore properties of the material during the different functionalization steps. This universal approach is suitable for the selective synthesis of pores with tunable surface-peptide functionalization, with applications to the synthesis of a big variety of silica-peptide model systems, which in the future may lead to a deeper understanding of complex biological systems.

An impedimetric immunosensor for highly sensitive detection of IL-8 in human serum and saliva samples: A new surface modification method by 6-phosphonohexanoic acid for biosensing applications

In this study, we fabricated a sensitive and label-free impedimetric immunosensor based on 6-phosphonohexanoic acid (PHA) modified ITO electrode for detection of interleukin-8 (IL-8) in human serum and saliva. PHA was first employed to cancer biomarker sensing platform. Anti-IL-8 antibody was used as a biorecognition element and the detection principle of this immunosensor was based on monitoring specific interaction between anti-IL-8 antibody and IL-8 antigen. The morphological characterization of each electrode modification step was analyzed by scanning electron microscopy (SEM), SEM-energy dispersive X-ray spectroscopy (EDX) and atomic force microscopy (AFM) while electrochemical characterization was performed by electrochemical impedance spectroscopy (EIS), cyclic voltammetry (CV) and single frequency impedance (SFI) techniques. Moreover, the antibody immobilization on the electrode surface was proved Fourier-transform infrared spectroscopy (FTIR) and Raman Spectroscopy. This proposed impedimetric immunosensor exhibited good performances with a wide linear in the range from 0.02 pg/mL to 3 pg/mL as well as a relative low detection limit of 6 fg/mL. The impedimetric immunosensor had a good specificity, stability and reproducibility. This study proved that PHA was a suitable interface material to fabricate an electrochemical biosensor.

From Protein Features to Sensing Surfaces

Proteins play a major role in biosensors in which they provide catalytic activity and specificity in molecular recognition. However, the immobilization process is far from straightforward as it often affects the protein functionality. Extensive interaction of the protein with the surface or significant surface crowding can lead to changes in the mobility and conformation of the protein structure. This review will provide insights as to how an analysis of the physico-chemical features of the protein surface before the immobilization process can help to identify the optimal immobilization approach. Such an analysis can help to preserve the functionality of the protein when on a biosensor surface.

Covalent immobilization of acetylcholinesterase on a novel polyacrylic acid-based nanofiber membrane

In this study, polyacrylic acid-based nanofiber (NF) membrane was prepared via electrospinning method. Acetylcholinesterase (AChE) from Electrophorus electricus was covalently immobilized onto polyacrylic acid-based NF membrane by demonstrating efficient enzyme immobilization, and immobilization capacity of polymer membranes was found to be 0.4 mg/g. The novel NF membrane was synthesized via thermally activated surface reconstruction, and activation with carbonyldiimidazole upon electrospinning. The morphology of the polyacrylic acid-based membrane was investigated by scanning electron microscopy, Fourier Transform Infrared Spectroscopy, and thermogravimetric analysis. The effect of temperature and pH on enzyme activity was investigated and maxima activities for free and immobilized enzyme were observed at 30 and 35°C, and pH 7.4 and 8.0, respectively. The effect of 1 mM Mn²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Mg²⁺, Ca²⁺ ions on the stability of the immobilized AChE was also investigated. According to the Michaelis-Menten plot, AChE possessed a lower affinity to acetylthiocholine iodide after immobilization, and the Michaelis-Menten constant of immobilized and free AChE were found to be 0.5008 and 0.4733 mM, respectively. The immobilized AChE demonstrated satisfactory reusability, and even after 10 consecutive activity assay runs, AChE maintained ca. 87% of its initial activity. Free enzyme lost its activity completely within 60 days, while the immobilized enzyme retained approximately 70% of the initial activity under the same storage time. The favorable reusability of immobilized AChE enables the support to be employable to develop the AChE-based biosensors.

Acetylcholinesterase-functionalized two-dimensional photonic crystals for the detection of organophosphates

AChE-modified 2D-PC was developed for the easy and visual detection of organophosphates.

A novel electrochemical immunosensor based on ITO modified by carboxyl-ended silane agent for ultrasensitive detection of MAGE-1 in human serum

A new, low-cost electrochemical immunosensor was developed for rapid detection of Melanoma-associated antigen 1 (MAGE-1), a cancer biomarker. The fabrication procedure of immunosensor was based on the covalent immobilization of anti-MAGE-1, biorecognition molecule, on ITO electrode by carboxyethylsilanetriol (CTES) monolayer. The biosensing MAGE-1 antigen was monitored by using electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV) technique. Apart from these techniques, single frequency impedance (SFI) was used for investigation of antibody-antigen interactions. Scanning electron microscopy (SEM), fourier transform infrared spectroscopy (FTIR), atomic force microscopy (AFM) were utilized for characterization of the proposed biosensor. To fabricate highly sensitive, good stability immunosensor, some parameters were optimized. Under optimal conditions, the developed electrochemical immunosensor for MAGE-1 exhibited a dynamic range of 4 fg/mL and 200 fg/mL with a low detection limit of 1.30 fg/mL. It had acceptable repeatability (5.05%, n = 20) and good storage stability (3.58% loss after 10 weeks). Moreover, this electrochemical immunosensor has been successfully applied to the determination of MAGE-1 in human serum samples.