The Fault in Their Shapes: Investigating the Surface-Plasmon-Resonance-Mediated Catalytic Activities of Silver Quasi-Spheres, Cubes, Triangular Prisms, and Wires

Form-Dependent Toxicity of Silver Nanomaterials in Rainbow Trout Gills

The toxicity of the form of nanoparticles is presently not well understood. The purpose of this study consists in comparing the toxicity of various forms of silver nanoparticles (nAg) in juvenile rainbow trout Oncorhynchus mykiss. Juveniles were exposed to various forms of polyvinyl-coated nAg of similar size for 96 h at 15 °C. After the exposure period, the gills were isolated and analyzed for Ag uptake/distribution, oxidative stress, glucose metabolism, and genotoxicity. Higher levels of Ag were detected in gills in fish exposed to dissolved Ag followed by spherical, cubic, and prismatic nAg. Size-exclusion chromatography of gill fractions revealed that the dissolution of nAg was observed for all forms of nAg where prismatic nAg released more important levels of Ag in the protein pool as in fish exposed to dissolved Ag as well. The aggregation of nAg was more important for cubic nAg in respect of the other forms of nAg. The data revealed that lipid peroxidation was closely associated with protein aggregation and viscosity. Biomarkers revealed changes in lipid/oxidative stress and genotoxicity, which were related to the loss of protein aggregation and inflammation (NO₂ levels), respectively. In general, the observed effects were found for all forms of nAg where the effects from prismatic nAg were generally higher than for spherical and cubic nAg. The strong relationship between genotoxicity and inflammation response suggests the participation of the immune system in the observed responses of juvenile fish gills.

Metal-coated concave cone in a fused-silica rod as a multi-function plasmonic element

A collimated light beam parallel to the axis of a fused-quartz cylinder impinging on a 90° apex angle concave cone cut in a quartz rod is transformed into a cylindrical wave by total internal reflection. A thin metal film at the quartz-air interface enables excitation of the plasmon mode at the air side that can polarize the cylindrical wave and/or has the potential to monitor physical, chemical, or biological quantities or events at the inner wall of the cone. The present Letter first analyzes the plasmon coupling mechanism and conditions. It then describes the diamond-grinding technique achieving a smooth cone wall and the finest possible tip. The experimental evidence of the polarization conversion is brought on a diamond-grinded section of fused-silica rod and gold coating of the concave wall.

Probing oxygen activation on plasmonic photocatalysts

In this work we present an assay to probe the oxygen activation rate on plasmonic nanoparticles under visible light. Using a superoxide-specific XTT molecular probe, the oxygen activation rate on bimetallic gold-silver “rainbow” nanoparticles with a broadband visible light (> 420 nm) response, is determined at different light intensities by measuring its conversion into the colored XTT-formazan derivate. A kinetic model is applied to enable a quantitative estimation of the rate constant, and is shown to match almost perfectly with the experimental data. Next, the broadband visible light driven oxygen activation capacity of this plasmonic rainbow system, supported on nano-sized SiO₂, is demonstrated towards the oxidation of aniline to azobenzene in DMSO. To conclude, a brief theoretical discussion is devoted to the possible mechanisms behind such plasmon-driven reactions.

Plasmonic catalysis with designer nanoparticles

Catalysis is central to a more sustainable future and a circular economy. If the energy required to drive catalytic processes could be harvested directly from sunlight, the possibility of replacing contemporary processes based on terrestrial fuels by the conversion of light into chemical energy could become a step closer to reality. Plasmonic catalysis is currently at the forefront of photocatalysis, enabling one to overcome the limitations of "classical" wide bandgap semiconductors for solar-driven chemistry. Plasmonic catalysis enables the acceleration and control of a variety of molecular transformations due to the localized surface plasmon resonance (LSPR) excitation. Studies in this area have often focused on the fundamental understanding of plasmonic catalysis and the demonstration of plasmonic catalytic activities towards different reactions. In this feature article, we discuss recent contributions from our group in this field by employing plasmonic nanoparticles (NPs) with controllable features as model systems to gain insights into structure-performance relationships in plasmonic catalysis. We start by discussing the effect of size, shape, and composition in plasmonic NPs over their activities towards LSPR-mediated molecular transformations. Then, we focus on the effect of metal support interactions over activities, reaction selectivity, and reaction pathways. Next, we shift to the control over the structure in hollow NPs and nanorattles. Inspired by the findings from these model systems, we demonstrate a design-driven strategy for the development of plasmonic catalysts based on plasmonic-catalytic multicomponent NPs for two types of molecular transformations: the selective hydrogenation of phenylacetylene and the oxygen evolution reaction. Finally, future directions, challenges, and perspectives in the field of plasmonic catalysis with designer NPs are discussed. We believe that the examples and concepts presented herein may inspire work and progress in plasmonic catalysis encompassing the design of plasmonic multicomponent materials, new strategies to control reaction selectivity, and the unraveling of stability and reaction mechanisms.

Au Nanoflowers for Catalyzing and In Situ Surface-Enhanced Raman Spectroscopy Monitoring of the Dimerization of p-Aminothiophenol

In this work, we demonstrated a facile approach for fabrication of Au nanoflowers (Au NFs) using an amino-containing organosilane, 3-aminopropyltriethoxysilane (APTES), as a shape-directing agent. In this approach, the morphology of the Au particles evolved from sphere-like to flower-like with increasing the concentration of APTES, accompanied by a red shift in the localized surface plasmon resonance peak from 520 to 685 nm. It was identified that the addition of APTES is profitable to direct the preferential growth of the (111) plane of face-centered cubic gold and promote the formation of anisotropic Au NFs. The as-prepared Au NFs, with APTES on their surface, presented effective catalytic and surface-enhanced Raman scattering (SERS) performances, as evidenced by their applications in catalyzing the dimerization of p-aminothiophenol and monitoring the reaction process via in situ SERS analysis.

Advances and challenges in metallic nanomaterial synthesis and antibacterial applications

Multi-drug resistant bacterial infection has become one of the most serious threats to global public health. The preparation and application of new antibacterial materials are of great significance for solving the infection problem of bacteria, especially multi-drug resistant bacteria. The exceptional antibacterial effects of metal nanoparticles based on their unique physical and chemical properties make such systems ideal for application as antibacterial drug carriers or self-modified therapeutic agents both in vitro and in vivo. Metal nanoparticles also have admirable clinical application prospects due to their broad antibacterial spectrum, various antibacterial mechanisms and excellent biocompatibility. Nevertheless, the in vivo structural stability, long-term safety and cytotoxicity of the surface modification of metal nanoparticles have yet to be further explored and improved in subsequent studies. Herein, we summarized the research progress concerning the mechanism of metal nanomaterials in terms of antibacterial activity together with the preparation of metal nanostructures. Based on these observations, we also give a brief discussion on the current problems and future developments of metal nanoparticles for antibacterial applications.

Visible light plasmon excitation of silver nanoparticles against antibiotic-resistant Pseudomonas aeruginosa

The interaction of metallic nanoparticles with light excites a local surface plasmon resonance (LSPR). This phenomenon enables the transfer of hot electrons to substrates that release Reactive Oxygen Species (ROS). In this context, the present study aimed at enhancing the antibacterial effect of citrate-covered silver nanoparticles (AgNPs) by LSPR excitation with visible LED. AgNPs possess excellent antimicrobial properties against Pseudomonas aeruginosa, one of the most refractory organisms to antibiotic treatment. The Minimum Inhibitory Concentration (MIC) of the AgNPs was 10 μg/ml under dark conditions and 5 μg/ml under light conditions. The combination of light and AgNPs led to 100% cell death after 60 min. Flow cytometry quantification showed that bacteria treated with LSPR-stimulated AgNPs displayed 4.8 times more ROS. This significant increase in ROS possibly accounts for most of the antimicrobial effect of the AgNPs. In addition, light exposition caused a small release of silver ions (0.4%) suggesting that silver ions may play a secondary role in P. aeruginosa death. Overall, the results presented here show that LSPR stimulation of AgNPs by visible light enhances the antimicrobial activity of silver nanoparticles and can be an alternative for the treatment of topic infections caused by antibiotic-resistant bacteria such as P. aeruginosa.

Design-controlled synthesis of IrO2 sub-monolayers on Au nanoflowers: marrying plasmonic and electrocatalytic properties

We develop herein plasmonic-catalytic Au-IrO₂ nanostructures with a morphology optimized for efficient light harvesting and catalytic surface area; the nanoparticles have a nanoflower morphology, with closely spaced Au branches all partially covered by an ultrathin (1 nm) IrO₂ shell. This nanoparticle architecture optimizes optical features due to the interactions of closely spaced plasmonic branches forming electromagnetic hot spots, and the ultra-thin IrO₂ layer maximizes efficient use of this expensive catalyst. This concept was evaluated towards the enhancement of the electrocatalytic performances towards the oxygen evolution reaction (OER) as a model transformation. The OER can play a central role in meeting future energy demands but the performance of conventional electrocatalysts in this reaction is limited by the sluggish OER kinetics. We demonstrate an improvement of the OER performance for one of the most active OER catalysts, IrO₂, by harvesting plasmonic effects from visible light illumination in multimetallic nanoparticles. We find that the OER activity for the Au-IrO₂ nanoflowers can be improved under LSPR excitation, matching best properties reported in the literature. Our simulations and electrocatalytic data demonstrate that the enhancement in OER activities can be attributed to an electronic interaction between Au and IrO₂ and to the activation of Ir-O bonds by LSPR excited hot holes, leading to a change in the reaction mechanism (rate-determinant step) under visible light illumination.

Controlled synthesis of noble metal nanomaterials: motivation, principles, and opportunities in nanocatalysis

This review describes some principles of the controlled synthesis of metal nanoparticles, focusing on how the fundamental understanding of their synthesis in the solution-phase can be put to tailor size, shape, composition, and architecture. The maneuvering over these parameters not only enable the tuning of properties, but also the maximization and optimization of performances for various applications. Herein, we start with a brief description of metallic nanoparticles, highlighting the motivation for achieving physicochemical control in their synthesis. After that, we turn our attention to some important definitions and classifications as well as their unique properties such as surface and quantum effects. Moreover, we discuss the strategies for the controlled synthesis of metal nanomaterials based on the top-down and bottom-up approaches, focusing our discussion on their formation mechanisms in liquid-phase in terms of both thermodynamic and kinetic control. Finally, we point out the promising applications of controlled nanomaterials in the field of nanocatalysis and plasmon-enhanced catalysis, describing some of the current challenges in these fields.

Light-assisted surface reactions on metal nanoparticles

Light-assisted surface reaction can lower reaction temperature, potentially reducing the energy use by providing light together with heat.

Synthesis of Core@Shell Nanostructures in a Continuous Flow Droplet Reactor: Controlling Structure through Relative Flow Rates

Bimetallic nanostructures are primarily synthesized in small volume batches. However, droplet-based reactors are receiving attention due to their ability to maintain thermal and compositional equilibrium within and between droplets, enabling flow operations for inline analyses and the scale-up of nanomaterial syntheses. Here, the syntheses of shape-controlled core@shell Au@Pd nanostructures with variable shell thicknesses are reported through control of the relative flow rates of reagents within the microreactor. Specifically, Pd shells were grown on cubic or octahedral Au seeds, selected as a model system. In batch reactions, shell thickness is determined by precursor concentration; however, as shown here, precursor feedstock concentration can be held constant, with the precursor concentration within the droplets being controlled through relative flow rates. This approach allows process conditions to be modified inline rather than from batch to batch to achieve particles with different shell thicknesses, and this procedure should be applicable to other multicomponent systems.

Gas-phase self-assembly of uniform silica nanostructures decorated and doped with silver nanoparticles

We report a systematic study of the controlled gas-phase synthesis of silver-silica hybrid nanostructures (Ag-SiO₂ NP) using the concept of evaporation-induced self-assembly. The approach includes the use of a direct gas-phase electrophoresis for size classification and in situ characterization of mobility size. Transmission electron microscopy and ultraviolet-visible light spectroscopy were employed complementarily to determine the morphology and surface plasmon resonance of Ag-SiO₂ NP. Results show that two types of Ag-SiO₂ NPs were successfully synthesized: (1) AgNPs decorated on a SiO₂-NP (Ag-T-SiO₂ NP), and (2) AgNPs doped in a cluster of SiO₂-NPs (Ag-C-SiO₂ NP). The physical size, morphology, and compositions of Ag-SiO₂ NPs were tunable through the adjustments of precursor concentrations and the selected mobility sizes. The results also show that SPR performance, colloidal stability, and dispersibility of AgNPs enhanced significantly in an aqueous environment after the hybridization with SiO₂-NP (especially for Ag-C-SiO₂ NP). The results and corresponding methodology summarized here provide the proof of concept to fabricate high-purity AgNP-based hybrid nanostructures through gas-phase evaporation-induced self-assembly for future biomedical applications (e.g., hyperthermal therapy, targeted drug delivery, and antibacterial applications).

Silver coated magnetic microflowers as efficient and recyclable catalysts for catalytic reduction

Synthesis of highly-branched Fe₃O₄@SiO₂@Ag microflowers and their use as efficient and recyclable catalysts for catalytic reduction.

Surface PEGylation of Silver Nanoparticles: Kinetics of Simultaneous Surface Dissolution and Molecular Desorption

A quantitative study of the stability of silver nanoparticles (AgNPs) conjugated with thiolated polyethylene glycol (SH-PEG) was conducted using gas-phase ion-mobility and mass analyses. The extents of aggregation and surface dissolution of AgNPs, as well as the amount of SH-PEG adsorption and desorption, were able to be characterized simultaneously for the kinetic study. The results show that the SH-PEG with a molecular mass of 6 kg/mol (SH-PEG6K) was able to adsorb to the surface of AgNP to form PEG6K-HS-AgNP conjugates, with the maximum surface adsorbate density of ∼0.10 nm(-2). The equilibrium binding constant for SH-PEG6K on AgNPs was calculated as ∼(4.4 ± 0.9) × 10(5) L/mol, suggesting a strong affinity due to thiol bonding to the AgNP surface. The formation of SH-PEG6K corona prevented PEG6K-HS-AgNP conjugates from aggregation under the acidic environment (pH 1.5), but dissolution of core AgNPs occurred following a first-order reaction. The rate constant of Ag dissolution from PEG6K-HS-AgNP was independent of the starting surface packing density of SH-PEG6K on AgNP (σ0), indicating that the interactions of H(+) with core AgNP were not interfered by the presence of SH-PEG6K corona. The surface packing density of SH-PEG6K decreased simultaneously following a first-order reaction, and the desorption rate constant of SH-PEG6K from the conjugates was proportional to σ0. Our work presents the first quantitative study to illustrate the complex mechanism that involves simultaneous aggregation and dissolution of core AgNPs in combination with adsorption and desorption of SH-PEG. This work also provides a prototype method of coupled experimental scheme to quantify the change of particle mass versus the corresponding surface density of functional molecular species on nanoparticles.

Plasmonic Nanorattles as Next-Generation Catalysts for Surface Plasmon Resonance-Mediated Oxidations Promoted by Activated Oxygen

Nanorattles, comprised of a nanosphere inside a nanoshell, were employed as the next generation of plasmonic catalysts for oxidations promoted by activated O2 . After investigating how the presence of a nanosphere inside a nanoshell affected the electric-field enhancements in the nanorattle relative to a nanoshell and a nanosphere, the SPR-mediated oxidation of p-aminothiophenol (PATP) functionalized at their surface was investigated to benchmark how these different electric-field intensities affected the performances of Au@AgAu nanorattles, AgAu nanoshells and Au nanoparticles having similar sizes. The high performance of the nanorattles enabled the visible-light driven synthesis of azobenzene from aniline under ambient conditions. As the nanorattles allow the formation of electromagnetic hot spots without relying on the uncontrolled aggregation of nanostructures, it enables their application as catalysts in liquid phase under mild conditions using visible light as the main energy input.

Multifunctional and robust composite materials comprising gold nanoparticles at a spherical polystyrene particle surface

The preparation of composite particles comprising gold nanoparticles (4.5–26 nm) assembled at a polystyrene (PS) surface with tunable loading is reported with wide ranging potentials from cellular studies to catalysis.