Purely Visible-Light-Induced Photochromism in Ag-TiO2 Nanoheterostructures

Photochromic Color Tuning of Copper-Doped Zinc Sulfide Nanocrystals by Control of Local Dopant Environments

Inorganic photochromic materials offer several advantages over organic compounds, including relatively inexpensive and higher thermal stability. However, tuning their color with the same component has remained a significant challenge. In this study, we demonstrate that the photochromic color of Cu-doped ZnS nanocrystals (NCs), which is initially pale yellow before light irradiation, can be tuned from gray to brown by adjusting the surface stoichiometry of Zn and S, which is controlled through the use of thiol and non-thiol ligands. Several experiments and quantum chemical calculations using model clusters revealed that the color change is determined by the distribution of Cu, which significantly contributes to the coloration, specifically whether it resides on the Zn-rich or S-rich surface. In contrast, particle size and Cu concentration were found to have little effect on the photochromic color. This study expands the diversity of photochromic responses in inorganic NCs and marks an important step toward the development of further advanced photochromic nanomaterials.

Customizable High-Contrast Optical Responses: Dual Photosensitive Colors for Smart Textiles

Smart textiles demonstrating optical responses to external light stimuli hold great promise as functional materials with a wide range of applications in personalized decoration and information visualization. The incorporation of high-contrast, vivid, and real-time optical signals, such as color change or fluorescence emission, to indicate light on/off states is both crucial and challenging. In this study, we have developed a dual output photosensitive dye system possessing photochromic and photofluorescent properties, which was successfully applied to the dyeing and finishing processes of cotton fabrics. The design and fabrication of this dye system were based on the unique photoinduced proton transfer (PPT) principle exhibited by the water-soluble spiropyran (trans-MCH) molecule. The dual output response relies on the open-/closed-loop mechanism, wherein light regulates the trans-MCH molecule. Upon excitation by UV or visible light, the dye system and dyed fabrics display significant color changes and fluorescence switching in a real-time and highly reversible manner. Moreover, diverse photosensitive color systems can be tailored by direct blending with commercially available water-soluble dyes. By integrating high-contrast dual optical outputs into this scalable, versatile, and reversible dye system, we envisage the development and design of smart textiles capable of producing high-end products.

Photochromism of TiO2 Nanoparticles Doped with Molybdenum Ions: Neutral Color Change from Colorless to Black via Gray

Transition metal oxide nanoparticles have been extensively studied for the development of smart windows which are expected to be a promising technology to save energy in buildings. However, most of them turn blue under UV irradiation. Since the blue coloration affects the color of objects through the windows, the development of materials with a neutral color which hardly disturbs the view is more beneficial. In this work, we prepared a colorless-transparent TiO₂ colloidal solution containing Mo⁶⁺ ions (Mo-TiO₂), which turns black via gray in a nitrogen atmosphere under UV irradiation. An absorption peak was observed at 535 nm, which increased with an increase in the UV irradiation time and reached a constant value (Abs_max). The Abs_max value increased linearly with an increase in the Mo doping amount. We demonstrated that the photochromic behavior of the Mo-TiO₂ nanoparticles is completely different from that of pure MoO₃ or the mixture of MoO₃ and TiO₂. In addition, we performed a kinetic study to elucidate the mechanism and found that the coloration rate at the initial stage decreased with an increase in Mo doping amount. Based on the kinetic analysis, the following results are obtained: a color center is formed at a deeper energy level than the Mo dopant level; the number of the color center depends on the Mo doping amount, and the color center traps the photogenerated electrons more rapidly when it is isolated. The black color was bleached by purging the air in the solution. In particular, the gray state which is observed as a transient color is promising for the development of smart windows to shield the sunlight while allowing a clear and undistorted view.

Photoreactive Coating Material as an Effective and Durable Antimicrobial Composite in Reducing Bacterial Load on Surfaces in Livestock

Titanium dioxide (TiO2) is a well-known photocatalytic compound that can be used to effectively reduce the presence of pathogens in human and animal hospitals via ROS release. The aim of this study was to investigate the efficacy of a polymer-based composite layer containing TiO2 and zinc oxide (ZnO) against Escherichia coli (E. coli) of animal origin. We showed that the photocatalyst coating caused a significant (p < 0.001) reduction in pathogen numbers compared to the control with an average reduction of 94% over 30 min. We used six light sources of different wattages (4 W, 7 W, 9 W, 12 W, 18 W, 36 W) at six distances (35 cm, 100 cm, 150 cm, 200 cm, 250 cm, 300 cm). Samples (n = 2160) were taken in the 36 settings and showed no significant difference in efficacy between light intensity and distance. We also investigated the influence of organic contaminant that resulted in lower activity as well as the effect of a water jet and a high-pressure device on the antibacterial activity. We found that the latter completely removed the coating from the surface, which significantly (p < 0.0001) reduced its antibacterial potential. As a conclusion, light intensity and distance does not reduce the efficacy of the polymer, but the presence of organic contaminants does.

Photochromism of colloidal ZnO nanocrystal powders under ambient conditions

Zinc oxide (ZnO) nanocrystals (NCs) exhibit photochromic reactions under specific conditions upon ultraviolet light irradiation. Since the color is originated from the excited electrons at the conduction band of ZnO NCs, the photoinduced absorption is observed only in the solution with hole acceptors under inert conditions. ZnO is earth-abundant and less toxic than many other substances, and has been widely used in various industrial fields. If the photochromic reaction of ZnO can be observed consistently under ambient conditions, the material may pave the way for large-scale photochromic applications such as in pigments, windows, and building materials in addition to conventional photochromic applications. In this study, we synthesize hydrophilic ZnO NCs and observe the solid-state photochromic reactions in the visible to mid-infrared regions even in humid-air conditions. We reveal that the coloration of powders of ZnO NCs under ambient conditions originates mainly from two factors: (1) charge separation induced by hole trapping by water molecules adsorbed on the surface of NCs, and (2) deceleration of the reactions involving the electrons in the conduction band of ZnO NCs with molecular oxygen and the adsorbed water molecules.

Plasmonic Optoelectronic Memristor Enabling Fully Light-Modulated Synaptic Plasticity for Neuromorphic Vision

Exploration of optoelectronic memristors with the capability to combine sensing and processing functions is required to promote development of efficient neuromorphic vision. In this work, the authors develop a plasmonic optoelectronic memristor that relies on the effects of localized surface plasmon resonance (LSPR) and optical excitation in an Ag-TiO2 nanocomposite film. Fully light-induced synaptic plasticity (e.g., potentiation and depression) under visible and ultraviolet light stimulations is demonstrated, which enables the functional combination of visual sensing and low-level image pre-processing (including contrast enhancement and noise reduction) in a single device. Furthermore, the light-gated and electrically-driven synaptic plasticity can be performed in the same device, in which the spike-timing-dependent plasticity (STDP) learning functions can be reversibly modulated by visible and ultraviolet light illuminations. Thereby, the high-level image processing function, i.e., image recognition, can also be performed in this memristor, whose recognition rate and accuracy are obviously enhanced as a result of image pre-processing and light-gated STDP enhancement. Experimental analysis shows that the memristive switching mechanism under optical stimulation can be attributed to the oxidation/reduction of Ag nanoparticles due to the effects of LSPR and optical excitation. The authors' work proposes a new type of plasmonic optoelectronic memristor with fully light-modulated capability that may promote the future development of efficient neuromorphic vision.

Multi-Component Collaborative Step-by-Step Coloring Strategy to Achieve High-Performance Light-Responsive Color-Switching

Light-responsive color-switching materials (LCMs) are long-lasting hot fields. However, non-ideal comprehensive performance (such as color contrast and retention time cannot be combined, unsatisfactory repeatability, and non-automated coloring mode) significantly hinder their development toward high-end products. Herein, the development of LCMs that exhibit long retention time, good color contrast, repeatability, and the property of automatic coloring is reported. The realization of this goal stems from the adoption of a bio-inspired multi-component collaborative step-by-step coloring strategy. Under this strategy, a conventional one-step photochromic process is divided into a "light+heat" controlled multi-step process for the fabrication of the desired LCMs. The obtained LCMs can effectively resist the long-troubled ambient-light interference and avoid its inherent yellow background, thereby achieving the longest retention time and good repeatability. Multiple colors are generated and ultra-fast imaging compatible with the laser-printing technology is also realized. The application potential of the materials in short-term reusable identity cards, absorptive readers, billboards, and shelf labels is demonstrated. The results reported herein can potentially help in developing and designing various high-performance, switchable materials that can be used for the production of high-end products.

Origin of the Anomalous Temperature Dependence of the Photochromic Reaction of Cu-Doped ZnS Nanocrystals

The temperature dependence of the color fading process of thermally reversible photochromic reactions is one of the most important challenges for their industrial applications. Generally, photochromic reactions of organic molecules have a strong temperature dependence due to the occurrence of large conformational changes during the reactions. In contrast, we recently reported that the photochromic reaction of Cu-doped ZnS nanocrystals (NCs) exhibits a very small temperature dependence around room temperature. However, the mechanism underlying this phenomenon has not been clarified yet. Here, we reveal that the anomalous temperature dependence of Cu-doped ZnS NCs originates from the balance between the temperature dependence of the charge recombination and that of the adsorption/desorption of water molecules on the surface of the NCs, which act as hole acceptors. Exploring temperature-insensitive photochromic reactions is important not only for gaining fundamental insight into nanomaterials but also for developing novel photochromic materials for outdoor applications.

UV Photochromism in Transition Metal Oxides and Hybrid Materials

Limited levels of UV exposure can be beneficial to the human body. However, the UV radiation present in the atmosphere can be damaging if levels of exposure exceed safe limits which depend on the individual the skin color. Hence, UV photochromic materials that respond to UV light by changing their color are powerful tools to sense radiation safety limits. Photochromic materials comprise either organic materials, inorganic transition metal oxides, or a hybrid combination of both. The photochromic behavior largely relies on charge transfer mechanisms and electronic band structures. These factors can be influenced by the structure and morphology, fabrication, composition, hybridization, and preparation of the photochromic materials, among others. Significant challenges are involved in realizing rapid photochromic change, which is repeatable, reversible with low fatigue, and behaving according to the desired application requirements. These challenges also relate to finding the right synergy between the photochromic materials used, the environment it is being used for, and the objectives that need to be achieved. In this review, the principles and applications of photochromic processes for transition metal oxides and hybrid materials, photocatalytic applications, and the outlook in the context of commercialized sensors in this field are presented.

A Review of Photocatalytic Materials for Urban NOx Remediation

NOx is a pervasive pollutant in urban environments. This review assesses the current state of the art of photocatalytic oxidation materials, designed for the abatement of nitrogen oxides (NOx) in the urban environment, and typically, but not exclusively based on titanium dioxide (TiO2). Field trials with existing commercial materials, such as paints, asphalt and concrete, in a range of environments including street canyons, car parks, tunnels, highways and open streets, are considered in-depth. Lab studies containing the most recent developments in the photocatalytic materials are also summarised, as well as studies investigating the impact of physical parameters on their efficiency. It is concluded that this technology may be useful as a part of the measures used to lower urban air pollution levels, yielding ∼2% NOx removal in the immediate area around the surface, for optimised TiO2, in some cases, but is not capable of the reported high NOx removal efficiencies >20% in outdoor urban environments, and can in some cases lower air quality by releasing hazardous by-products. However, research into new material is ongoing. The reason for the mixed results in the studies reviewed, and massive range of removal efficiencies reported (from negligible and up to >80%) is mainly the large range of testing practices used. Before deployment in individual environments site-specific testing should be performed, and new standards for lab and field testing should be developed. The longevity of the materials and their potential for producing hazardous by-products should also be considered.

Photocatalytic Lime Render for Indoor and Outdoor Air Quality Improvement

This article reports a novel photocatalytic lime render for indoor and outdoor air quality improvement that is composed of a lime binder and doped TiO2 (KRONOClean 7000®) nanoparticles. These nanoparticles were distributed throughout the bulk of the finishing render, instead of as a thin coating, thus ensuring the durability of the photocatalytic properties upon superficial damage. The physical properties of these renders were not affected by the addition of nanoparticles except in the case of surface area, which increased significantly. In terms of their photocatalytic activity, these novel lime renders were shown to degrade up to 12% NOx under UV light and up to 11% formaldehyde under visible light.

Photochromism and photocatalysis of organic–inorganic hybrid iodoargentates modulated by argentophilic interactions

A series of organic–inorganic hybrid iodoargentates exhibit photochromic and photocatalytic properties, which could be effectively modulated by argentophilic interactions.

Photochromic and luminescent switchable iodoargentate hybrids directed by solvated lanthanide cations

A series of photochromic and luminescent switchable iodoargentate hybrids have been constructed by using solvated lanthanide cations as SDAs.

In Situ Synthesis of Mesoporous TiO2 Nanofibers Surface-Decorated with AuAg Alloy Nanoparticles Anchored by Heterojunction Exhibiting Enhanced Solar Active Photocatalysis

We designed an electrospinning synthesis protocol to obtain in situ, the mesoporous TiO₂ nanofibers, which are surface-decorated with plasmonic AuAg nanoparticles (AuAg-mTNF-H). Such alloy nanoparticles are found to be partially exposed on the surface of the nanofibers. Characterization by HRTEM and EDS confirmed the formation of 1:1 AuAg alloy nanoparticles on the surface of TiO₂ nanofibers with heterojunction at the interfaces. On the basis of electron microscopic characterization, we proposed that, during the formation of the nanofibers, the incorporated metal ions with surface capping of negative charges migrated toward the outer surface of the nascent fibers under the influence of high positive voltage required for electrospinning. As a result, after the subsequent thermal treatment, the crystallization of TiO₂ nanofibers and the formation of alloy nanoparticles took place, leading to the formation of a deep heterojunction through partial embedment of the nanoparticles. The formation of AuAg alloy also restricted the oxidation of Ag, thus making the nanoparticles highly stable in ambient condition. Accordingly, such unique AuAg-mTNF-H photocatalyst shows strong light absorption property covering the entire range of visible wavelengths with stability. The solar light harvesting property of AuAg-mTNF-H was verified by monitoring solar light induced H₂ evolution via water splitting and photodecomposition of MB. In both the cases AuAg-mTNF-H showed excellent H₂ evolution and photodecomposition of dye.

Electroactive Area from Porous Oxide Films Loaded with Silver Nanoparticles: Electrochemical and Electron Tomography Observations

Electrochemical studies of nanomaterial-based electrodes have been widely developed for catalyst and energy-harvesting applications. The evolution of these electrodes over time and their efficiency have been extensively studied and analyzed in order to optimize their performance. However, the electrochemical responses of electrodes are rarely studied in terms of the position of the active species within these electrodes. In this paper, we highlight that the spatial location of silver nanoparticles (NPs) embedded inside semiconductive porous films, TiO₂ or Fe₂O₃, is crucial for the electrochemical response. In fact, by using cycling voltammetry and electron tomography experiments, we show the existence of an "electroactive area", corresponding to a reduced thickness of the sample in close vicinity to a fluorine-doped tin oxide substrate where most of the electrochemical responses originate. Our results demonstrate that, for a film thickness of several hundred nanometers, only less than 30 nm close to the substrate responds electrochemically. However, cyclic voltammetry empties the electroactive area of silver NPs. Therefore, application of chronoamperometry coupled to irradiation allowed regeneration of this area thanks to an increased diffusion of silver species. In this paper, we also show the significant diffusion of silver species within the film during electrochemical experiments, a phenomenon even increased by irradiation. These results are therefore an important step that shows the importance of the localization of active species within a porous film and help in understanding and increasing the durability of nanomaterial-based electrodes.

Hybrid Noble-Metals/Metal-Oxide Bifunctional Nano-Heterostructure Displaying Outperforming Gas-Sensing and Photochromic Performances

As nanomaterials are dominating 21st century's scene, multiple functionality in a single (nano)structure is becoming very appealing. Inspired by the Land of the Rising Sun, we designed a bifunctional (gas-sensor/photochromic) nanomaterial, made with TiO₂ whose surface was simultaneously decorated with copper and silver (the Cu/Ag molar ratio being 3:1). This nanomaterial outperformed previous state-of-the-art TiO₂-based sensors for the detection of acetone, as well as the Cu-TiO₂-based photochromic material. It indeed possessed splendid sensitivity toward acetone (detection limit of 100 ppb, 5 times lower than previous state-of-the-art TiO₂-based acetone sensors), as well as reduced response/recovery times at very low working temperature, 150 °C, for acetone sensing. Still, the same material showed itself to be able to (reversibly) change in color when stimulated by both UV-A and, most remarkably, visible light. Indeed, the visible-light photochromic performance was almost 3 times faster compared to the standard Cu-TiO₂ photochromic material-that is, 4.0 min versus 10.8 min, respectively. It was eventually proposed that the photochromic behavior was triggered by different mechanisms, depending on the light source used.

Two photochromic iodoargentate hybrids with adjustable photoresponsive mechanism

Two photochromic hybrid iodoargentates with adjustable photoresponsive mechanism have been synthesized and exhibit fast response and wide color range.