Effect of the Incorporation of Nanosized Titanium Dioxide on the Interfacial Properties of 1,2-Dipalmitoyl-sn-glycerol-3-phosphocholine Langmuir Monolayers

Membrane-Nanoparticle Interactions: The Impact of Membrane Lipids

The growing field of nanotechnology presents opportunity for applications across many sectors. Nanostructures, such as nanoparticles, hold distinct properties based on their size, shape, and chemical modifications that allow them to be utilized in both highly specific as well as broad capacities. As the classification of nanoparticles becomes more well-defined and the list of applications grows, it is imperative that their toxicity be investigated. One such cellular system that is of importance are cellular membranes (biomembranes). Membranes present one of the first points of contact for nanoparticles at the cellular level. This review will address current studies aimed at defining the biomolecular interactions of nanoparticles at the level of the cell membrane, with a specific focus of the interactions of nanoparticles with prominent lipid systems.

Interfacial Rheological Investigation of Modified Silica Nanoparticles with Different Alkyl Chain Lengths at the n-Octane/Water Interface

The interfacial dilational rheology of silica nanoparticles (NPs) directly reflects the relationship between surface structure and interfacial behaviors in NPs, which has attracted significant attention in various industrial fields. In this work, modified silica nanoparticles (MNPs) with various alkyl chain lengths were synthesized and systematically characterized using Fourier transform infrared spectra, Zeta potential, and water contact angle measurements. It was found that the MNPs were successfully fabricated with similar degrees of modification. Subsequently, the interfacial behaviors of the MNPs in an n-octane/water system were investigated through interfacial dilational rheological experiments. The length of the modified alkyl chain dominated the hydrophilic-lipophile balance and the interfacial activity of the MNPs, evaluated by the equilibrium interfacial tension (IFT) variation and dilational elasticity modulus. In the large amplitude compression experiment, the balance between the electrostatic repulsion and interfacial activity in the MNPs was responsible for their ordered interfacial arrangement. The MNPs with the hexyl alkyl chain (M6C) presented the optimal amphipathy and could partly overcome the repulsion, causing a dramatic change in surface pressure. This was further confirmed by the variations in IFT and dilational elasticity during the compression path. The study provides novel insights into the interfacial rheology and interactions of functionally modified NPs.

Magnetically controlled insertion of magnetic nanoparticles into membrane model

Polysaccharide-coated magnetic nanoparticles (MNPs) have been reported to show potential applications in many biomedical fields. In this report, we have studied the interactions between magnetite (Fe3O4) MNPs functionalized with polysaccharides (diethylamino-ethyl dextran, DEAE-D or chitosan, CHI) with different membranes models by Langmuir isotherms, incorporation experiments, and brewster angle microscopy (BAM). In this report, zwitterionic 1,2-distearoyl-sn-glycerol-3-phosphoethanolamine (DSPE) and anionic 1,2-distearoyl-sn-glycerol-3-phosphate (DSPA) phospholipid, were used to form membrane models. Incorporation experiments (π-t) as well as the compression isotherms demonstrate positive interactions between MNPs and DSPE or DSPA monolayers. The study assessed the impact of varying initial surface pressure on a preformed phospholipid monolayer to determine the maximum insertion pressure (MIP) and synergy. Our findings indicate that the primary driving force of the coated MNPs incorporation into the monolayer predominantly stems from electrostatic interaction. The drop in the subphase pH from 6.0 to 4.0 led to an enhancement of the MIP value for DSPA phospholipid monolayer. On the other hand, for DSPE, the drop in the pH does not affect the MIP values. Besides, the presence of a magnetic field induces an enhancement of the insertion process of the MNPs into DSPA preformed monolayer, demonstrating that a previous interaction between MNPs and phospholipid preformed monolayer needs to take place to enhance the incorporation process. This work opens novel perspectives for the research of the influence of magnetic fields on the incorporation of MNPs into model membranes.

Interaction of negatively and positively capped gold nanoparticle with different lipid model membranes

The use of functionalised gold nanoparticles in biomedical applications is expanding. Here we explore the interaction of gold nanoparticles with lipid membranes using readily available equipment and basic techniques to explore how the charge on the nanoparticles, and the nature of the lipid, influences the interaction. Gold nanoparticles were synthesised with two different surface functionalisations, negatively charged citrate groups and positively charged cetyltrimethylammonium groups from CTAB, to determine how surface charge affects the interaction of the nanoparticles with the Zwitterionic lipid POPC and the anionic lipid POPG. It was observed that the surface pressure/area isotherms of POPG monolayers on exposure to citrate capped nanoparticles were not shifted to higher molecular areas as much as those of POPC, suggesting that the anionic headgroups of the POPG lipid repel the anionic surface charge of the citrate capped nanoparticles to some extent limiting inclusion. In contrast, the surface pressure/area isotherms of the POPG monolayers exposed to CTAB capped nanoparticles are shifted to higher molecular areas more than for the POPC monolayers. The interaction of anionic nanoparticles with lipid bilayers was measured by the mass change of the bilayer deposited on the surface of a quartz crystal microbalance (QCM) exposed to nanoparticles in an aqueous phase flow. The QCM frequency changes show that bilayers of unsaturated phosophocholine lipids readily took up particles, whereas for the saturated lipid DPPC significant uptake was only observed when the bilayer was warmed to above its gel-to-fluid transition temperature, T_m. This is possibly due to an increase in the molecular mobility and bilayer bending modulus, κ, of the bilayer.

Interactions between O2 Nanobubbles and the Pulmonary Surfactant in the Presence of Inhalation Medicines

A dispersion of oxygen nanobubbles (O2-NBs) is an extraordinary gas-liquid colloidal system where spherical gas elements can be considered oxygen transport agents. Its conversion into inhalation aerosol by atomization with the use of nebulizers, while maintaining the properties of the dispersion, gives new opportunities for its applications and may be attractive as a new concept in treating lung diseases. The screening of O2-NBs interactions with lung fluids is particularly needed in view of an O2-NBs application as a promising aerosol drug carrier with the additional function of oxygen supplementation. The aim of the presented studies was to investigate the influence of O2-NBs dispersion combined with the selected inhalation drugs on the surface properties of two types of pulmonary surfactant models (lipid and lipid-protein model). The characteristics of the air-liquid interface were carried out under breathing-like conditions using two selected tensiometer systems: Langmuir-Wilhelmy trough and the oscillating droplet tensiometer. The results indicate that the presence of NBs has a minor effect on the dynamic characteristics of the air-liquid interface, which is the desired effect in the context of a potential use in inhalation therapies.

Evaluating the Impact of Hydrophobic Silicon Dioxide in the Interfacial Properties of Lung Surfactant Films

The interaction of hydrophobic silicon dioxide particles (fumed silicon dioxide), as model air pollutants, and Langmuir monolayers of a porcine lung surfactant extract has been studied in order to try to shed light on the physicochemical bases underlying the potential adverse effects associated with pollutant inhalation. The surface pressure-area isotherms of lung surfactant (LS) films including increasing amounts of particles revealed that particle incorporation into LS monolayers modifies the organization of the molecules at the water/vapor interface, which alters the mechanical resistance of the interfacial films, hindering the ability of LS layers for reducing the surface tension, and reestablishing the interface upon compression. This influences the normal physiological function of LS as is inferred from the analysis of the response of the Langmuir films upon the incorporation of particles against harmonic changes of the interfacial area (successive compression-expansion cycles). These experiments evidenced that particles alter the relaxation mechanisms of LS films, which may be correlated to a modification of the transport of material within the interface and between the interface and the adjacent fluid during the respiratory cycle.

Fluid Films as Models for Understanding the Impact of Inhaled Particles in Lung Surfactant Layers

Pollution is currently a public health problem associated with different cardiovascular and respiratory diseases. These are commonly originated as a result of the pollutant transport to the alveolar cavity after their inhalation. Once pollutants enter the alveolar cavity, they are deposited on the lung surfactant (LS) film, altering their mechanical performance which increases the respiratory work and can induce a premature alveolar collapse. Furthermore, the interactions of pollutants with LS can induce the formation of an LS corona decorating the pollutant surface, favoring their penetration into the bloodstream and distribution along different organs. Therefore, it is necessary to understand the most fundamental aspects of the interaction of particulate pollutants with LS to mitigate their effects, and design therapeutic strategies. However, the use of animal models is often invasive, and requires a careful examination of different bioethics aspects. This makes it necessary to design in vitro models mimicking some physico-chemical aspects with relevance for LS performance, which can be done by exploiting the tools provided by the science and technology of interfaces to shed light on the most fundamental physico-chemical bases governing the interaction between LS and particulate matter. This review provides an updated perspective of the use of fluid films of LS models for shedding light on the potential impact of particulate matter in the performance of LS film. It should be noted that even though the used model systems cannot account for some physiological aspects, it is expected that the information contained in this review can contribute on the understanding of the potential toxicological effects of air pollution.

Interactions of model airborne particulate matter with dipalmitoyl phosphatidylcholine and a clinical surfactant Calsurf

HYPOTHESIS

Lung surfactant protects lung tissue and reduces the surface tension in the alveoli during respiration. Particulate matter with an aerodynamic diameter of less than 2.5 μm (PM_2.5), which invades primely through inhalation, can deposit on and interact with the surfactant layer, leading to changes in the biophysical and morphological properties of the lung surfactant.

EXPERIMENTS

Langmuir monolayers of 1,2-dipalmitoyl-sn-glycero-3-phosphatidylcholine (DPPC) and clinical surfactant Calsurf were investigated with a PM_2.5 model injected into the water subphase, which were characterized by surface pressure-area isotherms, Brewster angle microscopy, atomic force microscopy, fluorescent microscopy, and x-ray photoelectron spectroscopy. The binding between DPPC/Calsurf and PM_2.5 was studied using isothermal titration calorimetry.

FINDINGS

PM_2.5 induced the expansion of the monolayers at low surface pressure (п) and film condensation at high п. Aggregation of PM_2.5 mainly occurred at the interface of liquid expanded/liquid condensed (LE/LC) phases. PM_2.5 led to slimmer and ramified LC domains on DPPC and the reduction of nano-sized condensed domains on Calsurf. Both DPPC and Calsurf showed fast binding with PM_2.5 through complex binding modes attributed to the heterogeneity and amphiphilic property of PM_2.5. This study improves the fundamental understanding of PM_2.5-lung surfactant interaction and shows useful implications of the toxicity of PM_2.5 through respiration process.

Atomistic Molecular Dynamics Simulations of Lipids Near TiO2 Nanosurfaces

Understanding of interactions between inorganic nanomaterials and biomolecules, and particularly lipid bilayers, is crucial in many biotechnological and biomedical applications, as well as for the evaluation of possible toxic effects caused by nanoparticles. Here, we present a molecular dynamics study of adsorption of two important constituents of the cell membranes, 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC) and 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphoethanolamine (POPE), lipids to a number of titanium dioxide planar surfaces, and a spherical nanoparticle under physiological conditions. By constructing the number density profiles of the lipid headgroup atoms, we have identified several possible binding modes and calculated their relative prevalence in the simulated systems. Our estimates of the adsorption strength, based on the total fraction of adsorbed lipids, show that POPE binds to the selected titanium dioxide surfaces stronger than DMPC, due to the ethanolamine group forming hydrogen bonds with the surface. Moreover, while POPE shows a clear preference toward anatase surfaces over rutile, DMPC has a particularly high affinity to rutile(101) and a lower affinity to other surfaces. Finally, we study how lipid concentration, addition of cholesterol, as well as titanium dioxide surface curvature may affect overall adsorption.

Investigation on the Interactions between Self-Assembled β-Sheet Peptide Nanofibers and Model Cell Membranes

Self-assembled peptide nanofibers (NFs) obtained from β-sheet peptides conjugated with drugs, including antigenic peptides, have recently attracted significant attention. However, extensive studies on the interactions of β-sheet peptide NFs with model cell membranes have not been reported. In this study, we investigated the interactions between three types of NFs, composed of PEG-peptide conjugates with different ethylene glycol (EG) lengths (6-, 12- and 24-mer), and dipalmitoylphosphatidylcholine (DPPC) Langmuir membranes. When increasing the EG chain length, those interactions significantly decreased considering measurements in the presence of the NFs of: (i) changes in surface pressure of the DPPC Langmuir monolayers and (ii) surface pressure-area (π-A) compression isotherms of DPPC. Because the observed trend was similar to the EG length dependency with regard to cellular association and cytotoxicity of the NFs that was reported previously, the interaction of NFs with phospholipid membranes represented a crucial factor to determine the cellular association and toxicity of the NFs. In contrast to NFs, no changes were observed with varying EG chain length on the interaction of the building block peptide with the DPPC membrane. The results obtained herein can provide a design guideline on the formulation of β-sheet peptide NFs, which may broaden its potential.

Manufacturing drug co-loaded liposomal formulations targeting breast cancer: Influence of preparative method on liposomes characteristics and in vitro toxicity

Developing more efficient manufacturing methods for nano therapeutic systems is becoming important, not only to better control their physico-chemical characteristics and therapeutic efficacy but also to ensure scale-up is cost-effective. The principle of cross-flow chemistry allows precise control over manufacturing parameters for the fabrication of uniform liposomal formulations, as well as providing reproducible manufacturing scale-up compared to conventional methods. We have herein investigated the use of microfluidics to produce PEGylated DSPC liposomes loaded with doxorubicin and compared their performance against identical formulations prepared by the thin-film method. The isoprenylated coumarin umbelliprenin was selected as a co-therapeutic. Umbelliprenin-loaded and doxorubicin:umbelliprenin co-loaded liposomes were fabricated using the optimised microfluidic set-up. The role of umbelliprenin as lipid bilayer fluidity modulation was characterized, and we investigated its role on liposomes size, size distribution, shape and stability compared to doxorubicin-loaded liposomes. Finally, the toxicity of all liposomal formulations was tested on a panel of human breast cancer cells (MCF-7, MDA-MB 231, BT-474) to identify the most potent formulation by liposomal fabrication method and loaded compound(s). We herein show that the microfluidic system is an alternative method to produce doxorubicin:umbelliprenin co-loaded liposomes, allowing fine control over liposome size (100-250 nm), shape, uniformity and doxorubicin drug loading (>80%). Umbelliprenin was shown to confer fluidity to model lipid biomembranes, which helps to explain the more homogeneous size and shape of co-loaded liposomes compared to liposomes without umbelliprenin. The toxicity of doxorubicin:umbelliprenin co-loaded liposomes was lower than that of free doxorubicin, due to the delayed release of doxorubicin from liposomes. An alternative, rapid and easy manufacturing method for the production of liposomes has been established using microfluidics to effectively produce uniform doxorubicin:umbelliprenin co-loaded liposomal formulations with proven cytotoxicity in human breast cancer cell lines in vitro.

Interactions of particulate matter and pulmonary surfactant: Implications for human health

Particulate matter (PM), which is the primary contributor to air pollution, has become a pervasive global health threat. When PM enters into a respiratory tract, the first body tissues to be directly exposed are the cells of respiratory tissues and pulmonary surfactant. Pulmonary surfactant is a pivotal component to modulate surface tension of alveoli during respiration. Many studies have proved that PM would interact with pulmonary surfactant to affect the alveolar activity, and meanwhile, pulmonary surfactant would be adsorbed to the surface of PM to change the toxic effect of PM. This review focuses on recent studies of the interactions between micro/nanoparticles (synthesized and environmental particles) and pulmonary surfactant (natural surfactant and its models), as well as the health effects caused by PM through a few significant aspects, such as surface properties of PM, including size, surface charge, hydrophobicity, shape, chemical nature, etc. Moreover, in vitro and in vivo studies have shown that PM leads to oxidative stress, inflammatory response, fibrosis, and cancerization in living bodies. By providing a comprehensive picture of PM-surfactant interaction, this review will benefit both researchers for further studies and policy-makers for setting up more appropriate regulations to reduce the adverse effects of PM on public health.

Interfacial rheology for the assessment of potential health effects of inhaled carbon nanomaterials at variable breathing conditions

Lung surface is the first line of contact between inhaled carbon nanomaterials, CNMs, and the organism, so this is the place where pulmonary health effects begin. The paper analyzes the influence of several CNMs (single- and multi-walled nanotubes with various surface area: 90-1,280 m²/g and aspect ratio: 8-3,750) on the surface-active properties of the lung surfactant, LS, model (Survanta). Effects of CNM concentration (0.1-1 mg/ml) and surface oscillation rate were determined using the oscillating drop method at simulated breathing conditions (2-10 s per cycle, 37 °C). Based on the values of apparent elasticity and viscosity of the interfacial region, new parameters: S_ε and S_μ were proposed to evaluate potential effect of particles on the LS at various breathing rates. Some of tested CNMs (e.g., COOH- functionalized short nanotubes) significantly influenced the surfactant dynamics, while the other had weaker effects even at high particle concentration. Analysis of changes in S_ε and S_μ provides a new way to evaluate of a possible disturbance of the basic functions of LS. The results show that the expected pulmonary effects caused by inhaled CNMs at variable breathing rate depend not only on particle concentration (inhaled dose) but also on their size, structure and surface properties.

Interaction of Particles with Langmuir Monolayers of 1,2-Dipalmitoyl-Sn-Glycero-3-Phosphocholine: A Matter of Chemistry?

Lipid layers are considered among the first protective barriers of the human body against pollutants, e.g., skin, lung surfactant, or tear film. This makes it necessary to explore the physico-chemical bases underlying the interaction of pollutants and lipid layers. This work evaluates using a pool of surface-sensitive techniques, the impact of carbon black and fumed silica particles on the behavior of Langmuir monolayers of 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC). The results show that the incorporation of particles into the lipid monolayers affects the surface pressure–area isotherm of the DPPC, modifying both the phase behavior and the collapse conditions. This is explained considering that particles occupy a part of the area available for lipid organization, which affects the lateral organization of the lipid molecules, and consequently the cohesion interactions within the monolayer. Furthermore, particles incorporation worsens the mechanical performance of lipid layers, which may impact negatively in different processes presenting biological relevance. The modification induced by the particles has been found to be dependent on their specific chemical nature. This work tries to shed light on some of the most fundamental physico-chemical bases governing the interaction of pollutants with lipid layers, which plays an essential role on the design of strategies for preventing the potential health hazards associated with pollution.

Nanoparticle translocation across the lung surfactant film regulated by grafting polymers

Nanoparticle-based pulmonary drug delivery has gained significant attention due to its ease of administration, increased bioavailability, and reduced side effects caused by a high systemic dosage. After being delivered into the deep lung, the inhaled nanoparticles first interact with the lung surfactant lining layer composed of phospholipids and surfactant proteins and then potentially cause the dysfunction of the lung surfactant. Conditioning the surface properties of nanoparticles with grafting polymers to avoid these side effects is of crucial importance to the efficiency and safety of pulmonary drug delivery. Herein, we perform coarse-grained molecular simulations to decipher the involved mechanism responsible for the translocation of the polymer-grafted Au nanoparticles across the lung surfactant film. The simulations illustrate that conditioning of the grafting polymers, including their length, terminal charge, and grafting density, can result in different translocation processes. Based on the energy analysis, we find that these discrepancies in translocation stem from the affinity of the nanoparticles with the lipid tails and heads and their contact with the proteins, which can be tuned by the surface polarity and surface charge of the nanoparticles. We further demonstrate that the interaction between the nanoparticles and the lung surfactant is related to the depletion of the lipids and proteins during translocation, which affects the surface tension of the surfactant film. The change in the surface tension in turn affects the nanoparticle translocation and the collapse of the surfactant film. These results can help understand the adverse effects of the nanoparticles on the lung surfactant film and provide guidance to the design of inhaled nanomedicines for improved permeability and targeting.

Influence of Carbon Nanosheets on the Behavior of 1,2-Dipalmitoyl-sn-glycerol-3-phosphocholine Langmuir Monolayers

Carbon nanomaterials are widespread in the atmospheric aerosol as a result of the combustion processes and their extensive industrial use. This has raised many question about the potential toxicity associated with the inhalation of such nanoparticles, and its incorporation into the lung surfactant layer. In order to shed light on the main physical bases underlying the incorporation of carbon nanomaterials into lung surfactant layers, this work has studied the interaction at the water/vapor interface of carbon nanosheets (CN) with Langmuir monolayers of 1,2-Dipalmitoyl-sn-glycerol-3-phosphocholine (DPPC), with this lipid being the main component of lung surfactant layers and responsible of some of the most relevant features of such film. The incorporation of CN into DPPC Langmuir monolayers modifies the lateral organization of the DPPC at the interface, which is explained on the basis of two different effects: (i) particles occupy part of the interfacial area, and (ii) impoverishment of the lipid composition of the interface due to lipid adsorption onto the CN surface. This results in a worsening of the mechanical performance of the monolayers which may present a negative impact in the physiological performance of lung surfactant. It would be expected that the results obtained here can be useful as a step toward the understanding of the most fundamental physico-chemical bases associated with the effect of inhaled particles in the respiratory cycle.

Colloids at Fluid Interfaces

Over the last two decades, understanding of the attachment of colloids to fluid interfaces has attracted the interest of researchers from different fields. This is explained by considering the ubiquity of colloidal and interfacial systems in nature and technology. However, to date, the control and tuning of the assembly of colloids at fluid interfaces remain a challenge. This review discusses some of the most fundamental aspects governing the organization of colloidal objects at fluid interfaces, paying special attention to spherical particles. This requires a description of different physicochemical aspects, from the driving force involved in the assembly to its thermodynamic description, and from the interactions involved in the assembly to the dynamics and rheological behavior of particle-laden interfaces.

Investigation of Drug for Pulmonary Administration-Model Pulmonary Surfactant Monolayer Interactions Using Langmuir-Blodgett Monolayer and Molecular Dynamics Simulation: A Case Study of Ketoprofen

Pulmonary administration is widely used for the treatment of lung diseases. The interaction between drug molecules and pulmonary surfactants affects the efficacy of the drug directly. The location and distribution of drug molecules in a model pulmonary surfactant monolayer under different surface pressures can provide vivid information on the interaction between drug molecules and pulmonary surfactants during the pulmonary administration. Ketoprofen is a nonsteroidal anti-inflammatory drug for pulmonary administration. The effect of ketoprofen molecules on the lipid monolayer containing 1,2-dipalmitoyl-sn-glycero-3-phosphatidylcholine (DPPC) and 1,2-dipalmitoyl-sn-glycero-3-phospho-rac-glycerol (DPPG) is studied by surface pressure (π)-area (A) isotherms and compressibility modulus (C_s^-1)-surface pressure (π) isotherms. The location and distribution of ketoprofen molecules in a lipid monolayer under different surface pressures are explored by surface tension, density profile, radial distribution function (RDF), and the potential of mean force (PMF) simulated by molecular dynamics (MD) simulation. The introduction of ketoprofen molecules affects the properties of DPPC/DPPG monolayers and the location and distribution of ketoprofen molecules in monolayers with various surface pressures. The existence of ketoprofen molecules hinders the formation of liquid-condensed (LC) films and decreases the compressibility of DPPC/DPPG monolayers. The location and distribution of ketoprofen molecules in the lipid monolayer are affected by cation-π interaction between the choline group of lipids and the benzene ring of ketoprofen, the steric hindrance of the lipid head groups, and the hydrophobicity of ketoprofen molecule itself, comprehensively. The contact state of lipid head group with water is determined by surface pressure, which affects the interaction between drug molecules and lipids and further dominates the location and distribution of ketoprofen in the lipid monolayer. This work confirms that ketoprofen molecules can affect the property and the inner structure of DPPC/DPPG monolayers during breathing. Furthermore, the results obtained using a mixed monolayer containing two major pulmonary surfactants DPPC/DPPG and ketoprofen molecules will be helpful for the in-depth understanding of the mechanism of inhaled administration therapy.

Physico-chemical foundations of particle-laden fluid interfaces

Particle-laden interfaces are ubiquitous nowadays. The understanding of their properties and structure is essential for solving different problems of technological and industrial relevance; e.g. stabilization of foams, emulsions and thin films. These rely on the response of the interface to mechanical perturbations. The complex mechanical response appearing in particle-laden interfaces requires deepening on the understanding of physico-chemical mechanisms underlying the assembly of particles at interface which plays a central role in the distribution of particles at the interface, and in the complex interfacial dynamics appearing in these systems. Therefore, the study of particle-laden interfaces deserves attention to provide a comprehensive explanation on the complex relaxation mechanisms involved in the stabilization of fluid interfaces.