Cu2+-Directed Liposome Membrane Fusion, Positive-Stain Electron Microscopy, and Oxidation

The Binding of Cu2+ to Lipid Membranes Is Not Substantially Influenced by Electrostatic Screening

Gouy-Chapman theory predicts that salt screening and modulating the interfacial charge density should strongly influence the apparent dissociation constant, Kd,app, between Cu2+ and negatively charged phosphatidylserine (PS) lipids in supported lipid bilayers (SLBs). Specifically, Kd,app would be expected to increase (weaken binding) by a factor of 40 when 100 mM NaCl is introduced into the solution because of electrostatic screening between the membrane and Cu2+ cations. Surprisingly, however, fluorescence quenching measurements demonstrate that Kd,app increases by less than a factor of 2 when increasing the salt concentration in the presence of standard buffers, such as tris(hydroxymethyl)aminomethane (Tris). Moreover, increasing the negative surface charge density by a factor of 4 would be predicted to decrease (strengthen binding) Kd,app by 3 orders of magnitude. Instead, Kd,app increases slightly when 15 mol % phosphatidylglycerol (PG), a negatively charged lipid, is introduced into SLBs already containing 5 mol % PS. Such findings indicate that electrostatic double layer theory is not a useful approach for predicting the binding behavior of transition metal cations to negatively charged interfaces. The problem lies with the fact that standard buffers, such as Tris, form a wide variety of coordination complexes in bulk solution with transition metal cations like Cu2+. Typically, dozens of complexes are present simultaneously at any given pH value and the net charge on them ranges from positive to neutral to negative. Such variations in charge on the complexes result in electrostatic screening and interfacial potential effects that are substantially diminished or nonexistent. These results should generally apply to the binding behavior of first row transition metal ions, when the cations predominantly reside in complexes rather than as free ions. This includes in vivo conditions, where the concentration of free transition metal ions is often very low.

Salt-Induced Adsorption and Rupture of Liposomes on Microplastics

Microplastics have attracted considerable attention because of concerns regarding their environmental risks to living systems. The interaction between the lipid bilayer and microplastics is important for examining the potential harm to biological membranes in the presence of microplastics. In addition, membrane coatings may change the surface and colloidal properties of microplastics. Herein, phosphatidylcholine (PC) lipids, whose headgroup is most common in cell membranes, were used as model lipids. The adsorption and rupture of PC liposomes on microplastics were systematically studied. We found that divalent metal ions, such as Mg2+ and Ca2+, facilitate liposome adsorption onto microplastics and induce 40-55% liposome leakage at 2.5 mM. In contrast, to achieve a similar effect, 300 mM Na+ was required. Adsorption and rupture followed the same metal concentration requirements, suggesting that liposome adsorption was the rate-limiting step. After adsorption with liposomes, microplastics became more hydrophilic and were better dispersed in water. A similar behavior was observed for all five types of tested microplastics, including PP, PE, PVC, PET, and PS. Leakage also occurred in ocean water. This study provides fundamental insights into the interactions between liposomes and microplastics and has implications for the colloidal and transport properties of microplastics.

Zn2+ Binds to Phosphatidylserine and Induces Membrane Blebbing

Herein, we show that Zn²⁺ binds to phosphatidylserine (PS) lipids in supported lipid bilayers (SLBs), forming a PS-Zn²⁺ complex with an equilibrium dissociation constant of ∼100 μM. Significantly, Zn²⁺ binding to SLBs containing more than 10 mol % PS induces extensive reordering of the bilayer. This reordering is manifest through bright spots of high fluorescence intensity that can be observed when the bilayer contains a dye-labeled lipid. Measurements using atomic force microscopy (AFM) reveal that these spots represent three-dimensional unilamellar blebs. Bleb formation is ion specific, inducible by exposing the bilayer to μM concentrations of Zn²⁺ but not Mg²⁺, Cu²⁺, Co²⁺, or Mn²⁺. Moreover, Ca²⁺ can induce some blebbing at mM concentrations but not nearly as effectively as Zn²⁺. The interactions of divalent metal cations with PS lipids were further investigated by a combination of vibrational sum frequency spectroscopy (VSFS) and surface pressure-area isotherm measurements. VSFS revealed that Zn²⁺ and Ca²⁺ were bound to the phosphate and carboxylate moieties on PS via contact ion pairing, dehydrating the lipid headgroup, whereas Mg²⁺ and Cu²⁺ were bound without perturbing the hydration of these functional groups. Additionally, Zn²⁺ was found to dramatically reduce the area per lipid in lipid monolayers, while Mg²⁺ and Cu²⁺ did not. Ca²⁺ could also reduce the area per lipid but only when significantly higher surface pressures were applied. These measurements suggest that Zn²⁺ caused lipid blebbing by decreasing the area per lipid on the side of the bilayer to which the salt was exposed. Such findings have implications for blebbing, fusion, oxidation, and related properties of PS-rich membranes in biological systems where Zn²⁺ concentrations are asymmetrically distributed.

Promoting DNA Adsorption by Acids and Polyvalent Cations: Beyond Charge Screening

Adsorbing DNA oligonucleotides onto nanoparticles is the first step in developing DNA-based biosensors, drug delivery systems, and smart materials. Since DNA is a polyanion, it is repelled by negatively charged nanoparticles, which constitute the majority of commonly used nanomaterials. Adding salt such as NaCl to screen charge repulsion is a standard method of promoting DNA adsorption. However, Na⁺ does not supply additional attractive forces. In addition, adding a high concentration of NaCl can cause the aggregation of nanomaterials. In this feature article, we mainly summarize the methods developed in our laboratory to promote DNA adsorption by lowering the pH and by adding polyvalent metal ions, especially transition-metal ions. Various materials including noble metals (gold, silver, and platinum), 2D materials (graphene oxide, MoS₂, WS₂, and MXene), polydopamine, and several metal oxides are discussed. In general, low pH can protonate DNA bases and nanoparticle surfaces, reducing charge repulsion and even leading to attraction, although DNA folding at low pH can sometimes be detrimental to adsorption. Polyvalent metal ions can bridge additional interactions to achieve otherwise impossible adsorption. On the basis of the current understanding, a few future research directions are proposed to further improve DNA adsorption.

Leakage and Rupture of Lipid Membranes by Charged Polymers and Nanoparticles

Understanding and controlling the interactions between lipid membranes and nanomaterials are important for drug delivery, toxicity studies, and sensing. In the literature, the perception is that cationic nanomaterials can damage lipid membranes, although some reports suggest the opposite. In this work, instead of using different materials for testing the effect of charge, we used the same material and adjusted the pH. A total of three types of liposomes including zwitterionic phosphocholine (PC) and negatively charged phosphoserine (PS) with saturated and unsaturated tails were tested with three types of metal oxide nanoparticles and two types of cationic polymers. A calcein leakage assay was used to probe membrane leakage. We found that cationic polymers had very little advantage for leaking PC liposomes. On the other hand, the PS liposomes were leaked by TiO₂ nanoparticles regardless of their charge tuned by pH. ZnO with a high pK_a value was studied in detail, and it only leaked the 1,2-dioleoyl-sn-glycero-3-phosphocholine liposomes at low pH when ZnO was positively charged, but leakage was inhibited by adding NaCl to weaken electrostatic attraction and by capping ZnO. In addition, dissolution of adsorbed ZnO also caused leakage, suggesting that adsorption and desorption induced reversible lipid phase transitions. Overall, the interaction strength was a key factor for leakage. Leakage does not necessarily mean membrane damage, and cryogenic transmission electron microscopy was used to study membrane integrity. Previously observed cationic polymer/nanoparticle-induced damages in supported membranes could be due to electrostatic attraction between the polymers and the underlying negatively charged supporting surface.

Growing a Nucleotide/Lanthanide Coordination Polymer Shell on Liposomes

Coating liposomes with a shell is a useful strategy to increase membrane stability and prevent leakage or fusion. Nucleotide/lanthanide coordination nanoparticles (NPs) are formed by a simple mixing at ambient conditions. Because some lipid headgroups contain lanthanide binding ligands, they may direct the growth of such coordination NPs. Herein, a gadolinium/adenosine monophosphate (Gd³⁺/AMP) shell was formed on liposomes (liposome@Gd³⁺/AMP) using lipids containing phosphoserine (PS) or cholinephosphate (CP) headgroups, while phosphocholine liposomes did not support the shell. Liposome binding Gd³⁺ is confirmed by transmission electron microscopy (TEM). The negatively charged CP and PS liposomes reversed to positive upon Gd³⁺ binding, while other metals such as Ca²⁺ and Zn²⁺ did not reverse the charge. Binding of Gd³⁺ did not leak the PS liposomes. Then, AMP was further added to cross-link Gd³⁺ on the liposome surface. A shell was formed as indicated by TEM, and the content inside the liposome remained for the PS liposomes. While adding Triton X-100 still induced leakage of the encapsulated liposomes, the shell protected the liposomes from leakage induced by ZnO NPs, suggesting a porous structure of the Gd³⁺/AMP shell which allowed penetration of Triton X-100 but not the larger ZnO NPs. This work provides a simple method to coat liposomes, and also offers a fundamental understanding of liposome adsorption of lanthanide ions.

Artificial Phospholipids and Their Vesicles

Phospholipids are at the heart and origin of life on this planet. The possibilities in terms of phospholipid self-assembly and biological functions seem limitless. Nonetheless, nature exploits only a small fraction of the available chemical space of phospholipids. Using chemical synthesis, artificial phospholipid structures become accessible, and the study of their biophysics may reveal unprecedented properties. In this article, the recent advances by our work group in the field of chemical lipidology are summarized. The family of diamidophospholipids is discussed in detail from monolayer characterization to the formation of faceted vesicles, culminating in the template-free self-assembly of phospholipid cubes and the possible applications of vesicle origami in modern personalized medicine.

Influence of Trivalent Metal Ions on Lipid Vesicles: Gelation and Fusion Phenomena

In this contribution, we report the interaction of 1,2-dimyristoyl- sn-glycero-3-phosphocholine (DMPC) lipid vesicles with a series of trivalent metal ions of the same group, namely, Al³⁺, Ga³⁺, and In³⁺, to get a distinct view of the effect of size, effective charge, and hydration free energy of these metal ions on lipid vesicles. We employed steady-state and time-resolved spectroscopic techniques including time-resolved anisotropy measurement, confocal imaging, and dynamic light scattering (DLS) measurement to probe the interaction. Our study reveals that all of the three trivalent metal ions induce gelation in lipid vesicles by removing water molecules from the interfacial region. The extent of gelation induced by the metal ions follows the order of In³⁺ > Ga³⁺ ≥ Al³⁺. We explain this observation in light of different free-energy terms. Notably, the degree of interaction for trivalent metal ions is higher as compared to that for divalent metal ions at physiological pH (pH ∼ 7.0). Most importantly, we observe that unlike divalent metal ions, trivalent metal ions dehydrate the lipid vesicles even at lower pH. The DLS measurement and confocal imaging indicate that In³⁺ causes significant aggregation or fusion of the PC vesicles, while Al³⁺ and Ga³⁺ did not induce any aggregation at the experimental concentration. We employ Derjaguin-Landau-Vervey-Overbeek (DLVO) theory to explain the aggregation phenomena induced by In³⁺.

Charge and Coordination Directed Liposome Fusion onto SiO2 and TiO2 Nanoparticles

TiO₂ and SiO₂ are very useful materials for building biointerfaces. A particularly interesting aspect is their interaction with lipid bilayers. Many past research efforts focused on phosphocholine (PC) lipids, which form supported lipid bilayers (SLB) on SiO₂ at physiological conditions but are adsorbed as intact liposomes on TiO₂. Low pH was required to form PC SLBs on TiO₂. This work intends to understand the surface forces and chemistry responsible for such differences. Two charge neutral lipids: 1,2-dioleoyl- sn-glycero-3-phosphocholine (DOPC) and 2-((2,3-bis(oleoyloxy)propyl)dimethylammonio)ethyl ethyl phosphate (DOCPe) and two negatively charged lipids: 1,2-dioleoyl- sn-glycero-3-phospho-l-serine (DOPS) and 2-((2,3-bis(oleoyloxy)propyl)dimethylammonio)ethyl hydrogen phosphate (DOCP) were used. Using calcein leakage assays, adsorption measurement, cryo-TEM, and washing, we concluded that charge is the dominating factor on SiO₂. The two neutral lipids form SLB on SiO₂ at pH 3 and 7, but the two negatively charged ones cannot form. On TiO₂, both charge and coordination chemistry are important. The two anionic lipids formed SLB from pH 3 to 10. DOCP had stronger affinity than DOPS likely due to the tighter terminal phosphate binding of the former. The two neutral liposomes formed SLB only at pH 3, where phosphate interaction and van der Waals force are deemed important. The pH 3 prepared TiO₂ DOPC SLBs are destabilized at neutral pH, indicating the reversible nature of the interaction. This work has provided new insights into two important materials interacting with common liposomes, which are important for reproducible biosensing, device fabrication, and drug delivery applications.