Controlled Synthesis of Cu2- xSe Nanoparticles as Near-Infrared Photothermal Agents and Irradiation Wavelength Dependence of Their Photothermal Conversion Efficiency

Nanoparticle-based drug delivery systems to modulate tumor immune response for glioblastoma treatment

Glioblastoma (GBM) is a primary central nervous system neoplasm, characterized by a grim prognosis and low survival rates. This unfavorable therapeutic outcome is partially attributed to the inadequate immune infiltration and an immunosuppressive microenvironment, which compromises the effectiveness of conventional radiotherapy and chemotherapy. To this end, precise modulation of cellular dynamics in the immune system has emerged as a promising approach for therapeutic intervention. The advent of nanoparticle-based therapies has revolutionized cancer treatment and provided highly effective options. Consequently, various strategically designed nano-delivery platforms have been established to promote the efficacy of immune therapy against GBM. This review delves into the recent advancements in nano-based delivery systems that are designed to modulate immune cells in GBM microenvironment, and explores their multifaceted mechanisms, including the blockade of immune checkpoints, the restraint of immunosuppressive cells, the coordination of tumor-associated macrophages, the activation of innate immune cells, and the stimulation of adaptive immunity. Collectively, this summary not only advances the comprehension involved in modulating antitumor immune responses in GBM, but also paves the way for the development of innovative therapeutic strategies to conquer GBM. STATEMENT OF SIGNIFICANCE: Glioblastoma (GBM) is the most lethal brain tumor, with a median survival rate of merely 12-16 months after diagnosis. Despite surgical, radiation and chemotherapy treatments, the two-year survival rate for GBM patients is less than 10 %. The treatment of GBM is challenging mainly because several issues associated with the GBM microenvironment have not yet been resolved. Most recently, novel drug delivery approaches, based on the clear understanding of the intrinsic properties of GBM, have shown promise in overcoming some of the obstacles. In particular, taking account of the highly immunosuppressive tumor microenvironment in GBM, recent advancements in nano-based delivery systems are put forward to stimulate immune cells in GBM and unravel their multifaceted mechanisms. This review summarizes the latest nanoparticle-based drug delivery systems to modulate tumor immune response for glioblastoma treatment. Moreover, the development trends and challenges of nanoparticle-based drug delivery systems in modulating the immunity of GBM are predicted, which may facilitate widespread regimens springing up for successfully treating GBM.

Biogenic Copper Selenide Nanoparticles for Near-Infrared Photothermal Therapy Application

Near-infrared (NIR) photothermal therapy (PTT) is attractive for cancer treatment but is currently restricted by limited availability and insufficient NIR-II photoactivity of photothermal agents, for which artificial nanomaterials are usually used. Here, we report the first use of biogenic nanomaterials for PTT application. A fine-controlled extracellular biosynthesis of copper selenide nanoparticles (bio-Cu_2-xSe) by Shewanella oneidensis MR-1 was realized. The resulting bio-Cu_2-xSe, with fine sizes (∼35.5 nm) and high product purity, exhibited 76.9% photothermal conversion efficiency under 1064 nm laser irradiation, outperforming almost all the existing counterparts. The protein capping also imparted good biocompatibility to bio-Cu_2-xSe to favor a safe PTT application. The in vivo PTT with injected bio-Cu_2-xSe in mice (without extraction nor further modification) showed 87% tumor ablation without impairing the normal organisms. Our work not only opens a green route to synthesize the NIR-II photothermal nanomaterial but may also lay a basis for the development of bacteria-nanomaterial hybrid therapy technologies.

Nanoparticles-based phototherapy systems for cancer treatment: Current status and clinical potential

Remarkable progress in phototherapy has been made in recent decades, due to its non-invasiveness and instant therapeutic efficacy. In addition, with the rapid development of nanoscience and nanotechnology, phototherapy systems based on nanoparticles or nanocomposites also evolved as an emerging hotspot in nanomedicine research, especially in cancer. In this review, first we briefly introduce the history of phototherapy, and the mechanisms of phototherapy in cancer treatment. Then, we summarize the representative development over the past three to five years in nanoparticle-based phototherapy and highlight the design of the innovative nanoparticles thereof. Finally, we discuss the feasibility and the potential of the nanoparticle-based phototherapy systems in clinical anticancer therapeutic applications, aiming to predict future research directions in this field. Our review is a tutorial work, aiming at providing useful insights to researchers in the field of nanotechnology, nanoscience and cancer.

Metal selenide nanomaterials for biomedical applications

Metal selenide nanomaterials have received enormous attention as they possess diverse compositions, microstructures, and properties. The combination of selenium with various metallic elements gives the metal selenide nanomaterials distinctive optoelectronic and magnetic properties, such as strong near-infrared absorption, excellent imaging properties, good stability, and long in vivo circulation. This makes metal selenide nanomaterials advantageous and promising for biomedical applications. This paper summarizes the research progress in the last five years in the controlled synthesis of metal selenide nanomaterials in different dimensions and with different compositions and structures. Then we discuss how surface modification and functionalization strategies are well-suited for biomedical fields, including tumor therapy, biosensing, and antibacterial biological applications. The future trends and issues of metal selenide nanomaterials in the biomedical field are also discussed.

Heat-Up Colloidal Synthesis of Shape-Controlled Cu-Se-S Nanostructures-Role of Precursor and Surfactant Reactivity and Performance in N2 Electroreduction

Copper selenide-sulfide nanostructures were synthesized using metal-organic chemical routes in the presence of Cu- and Se-precursors as well as S-containing compounds. Our goal was first to examine if the initial Cu/Se 1:1 molar proportion in the starting reagents would always lead to equiatomic composition in the final product, depending on other synthesis parameters which affect the reagents reactivity. Such reaction conditions were the types of precursors, surfactants and other reagents, as well as the synthesis temperature. The use of 'hot-injection' processes was avoided, focusing on 'non-injection' ones; that is, only heat-up protocols were employed, which have the advantage of simple operation and scalability. All reagents were mixed at room temperature followed by further heating to a selected high temperature. It was found that for samples with particles of bigger size and anisotropic shape the CuSe composition was favored, whereas particles with smaller size and spherical shape possessed a Cu2-xSe phase, especially when no sulfur was present. Apart from elemental Se, Al2Se3 was used as an efficient selenium source for the first time for the acquisition of copper selenide nanostructures. The use of dodecanethiol in the presence of trioctylphosphine and elemental Se promoted the incorporation of sulfur in the materials crystal lattice, leading to Cu-Se-S compositions. A variety of techniques were used to characterize the formed nanomaterials such as XRD, TEM, HRTEM, STEM-EDX, AFM and UV-Vis-NIR. Promising results, especially for thin anisotropic nanoplates for use as electrocatalysts in nitrogen reduction reaction (NRR), were obtained.

Precise control over the silica shell thickness and finding the optimal thickness for the peak heat diffusion property of AuNR@SiO2

Silica-coated gold nanorods (AuNRs) exhibit significantly enhanced photothermal effects and photoacoustic (PA) signal intensities, which is beneficial for various nanophotonic applications in materials science. However, the silica shell thickness for optimum enhancement is not fully understood and is even controversial depending on the physical state of the silica shell. This is because of the lack of systematic investigations of the nanoscale silica shell thickness and the photothermal effect. This study provides a robust synthetic method to control the silica shell thickness at the nanoscale and the physical state-dependent heat diffusion property. The selected base and solvent system enabled the production of silica-coated AuNRs (AuNR@SiO₂) with silica shell thicknesses of 5, 10, 15, 20, 25, 30, 35, and 40 nm. AuNRs with a 20 nm silica shell showed the highest photothermal effect with a 1.45-times higher photothermal efficiency than that of AuNRs without a silica shell. The low density of the silica shell on the AuNRs showed a low photothermal effect and photostability. It was found that the disruption of cetyltrimethyl ammonium bromide (CTAB) layers on the AuNRs was responsible for the low photostability of the AuNRs. The simulation study for the heat diffusion property showed facilitated heat diffusion in the presence of a 20 nm silica shell. In a cell-based study, AuNRs with a 20 nm silica shell showed the most sensitive photothermal effect for cell death. The results of this robust study can provide conclusive conditions for the optimal silica shell thickness to obtain the highest photothermal effect, which will be useful for the future design of nanomaterials in various fields of application.

A rational study of the influence of Mn2+-insertion in Prussian blue nanoparticles on their photothermal properties

We investigated a series of Mn²⁺-Prussian blue (PB) nanoparticles Na_zMn_xFe_1-x[Fe(CN)₆]_1-y□y·nH₂O of similar size, surface state and cubic morphology with various amounts of Mn²⁺ synthesized through a one step self-assembly reaction. We demonstrated by a combined experimental-theoretical approach that during the synthesis, Mn²⁺ substituted Fe³⁺ up to a Mn/Na-Mn-Fe ratio of 32 at% in the PB structure, while for higher amounts, the Mn₂[Fe(CN)₆] analogue is obtained. For comparison, the post-synthetic insertion of Mn2+ in PB nanoparticles was also investigated and completed with Monte-Carlo simulations to probe the plausible adsorption sites. The photothermal conversion efficiency (η) of selected samples was determined and showed a clear dependence on the Mn²⁺amount with a maximum efficiency for a Mn/Na-Mn-Fe ratio of 10 at% associated with a dependence on the nanoparticle concentration. Evaluation of the in vitro photothermal properties of these nanoparticles performed on triple negative human breast adenocarcinoma (MDA-MB-231) cells by using continuous and pulsed laser irradiation confirm their excellent PTT efficiency permitting low dose use.

Functionalized MoS2 Nanoflowers with Excellent Near-Infrared Photothermal Activities for Scavenging of Antibiotic Resistant Bacteria

Presently, antibiotic resistant bacteria (ARB) have been commonly found in environment, such as air, soil and lakes. Therefore, it is urgent and necessary to prepare antimicrobial agents with excellent anti-antibiotic resistant bacteria. In our research, poly-ethylene glycol functionalized molybdenum disulfide nanoflowers (PEG-MoS2 NFs) were synthesized via a one-step hydrothermal method. As-prepared PEG-MoS2 NFs displayed excellent photothermal conversion efficiency (30.6%) and photothermal stability. Under 808 nm NIR laser irradiation for 10 min, the inhibition rate of tetracycline-resistant Bacillus tropicalis and Stenotrophomonas malphilia reached more than 95% at the concentration of 50 μg/mL. More interestingly, the photothermal effect of PEG-MoS2 NFs could accelerate the oxidation of glutathione, resulting in the rapid death of bacteria. A functionalized PEG-MoS2 NFs photothermal anti-antibiotic resistant system was constructed successfully.

Recent advances in nanoparticles mediated photothermal therapy induced tumor regression

Photothermal therapy (PTT) is a minimally invasive procedure for treating cancer. The two significant prerequisites of PTT are the photothermal therapeutic agent (PTA) and near-infrared radiation (NIR). The PTA absorbs NIR, causing hyperthermia in the malignant cells. This increased temperature at the tumor microenvironment finally results in tumor cell damage. Nanoparticles play a crucial role in PTT, aiding in the passive and active targeting of the PTA to the tumor microenvironment. Through enhanced permeation and retention effect and surface-engineering, specific targeting could be achieved. This novel delivery tool provides the advantages of changing the shape, size, and surface attributes of the carriers containing PTAs, which might facilitate tumor regression significantly. Further, inclusion of surface engineering of nanoparticles is facilitated through ligating ligands specific to overexpressed receptors on the cancer cell surface. Thus, transforming nanoparticles grants the ability to combine different treatment strategies with PTT to enhance cancer treatment. This review emphasizes properties of PTAs, conjugated biomolecules of PTAs, and the combinatorial techniques for a better therapeutic effect of PTT using the nanoparticle platform.

Galvanic replacement synthesis of multi-branched gold nanocrystals for photothermal cancer therapy

We present a facile organic phase synthesis method for producing multi-branched gold nanocrystals (nanostars) with a broad localized surface plasmon resonance (LSPR) across near-infrared (NIR) to short-wave infrared (SWIR) wavelengths. In this approach, galvanic replacement of copper by gold, in seed particles produced in situ, initiates growth of multi-branched structures. The method enables broad tuning of the LSPR energy by manipulating the branch length, with peak LSPR absorbance tuned from 850 to 1880 nm, reaching SWIR wavelengths covering the second and third optical transparency windows in biological media, rarely achieved with noble metal plasmonic nanostructures. After a ligand-exchange process, the gold nanostars readily disperse in water while retaining their LSPR absorbance. The multi-branched Au nanocrystals (NCs) exhibit exceptionally high photothermal transduction efficiency, exceeding that of Au nanorods and nanoparticles, to which we make direct comparisons here. At the same time, their synthesis is much more straightforward than hollow structures like nanocages, nanoshells, and nanomatryoshkas that can also exhibit high photothermal efficiency at NIR wavelengths. In vitro photothermal heating of multi-branched Au NCs in the presence of human cervical cancer cells causes effective cell ablation after 10 min laser irradiation. Cell viability assays demonstrate that the NCs are biocompatible at doses required for photothermal therapy. These results suggest that the multi-branched Au NCs can serve as a new type of photothermal therapy agent and in other applications in which strong NIR to SWIR absorbers are needed.

Binary and Ternary Colloidal Cu-Sn-Te Nanocrystals for Thermoelectric Thin Films

Recent advances in copper chalcogenide-based nanocrystals (NCs), copper sulfide, and copper selenide derived nanostructures, have drawn considerable attention. However, reports of crystal phase and shape engineering of binary or ternary copper telluride NCs remain rare. Here, a colloidal hot-injection approach for producing binary copper/tin telluride, and ternary copper tin telluride NCs with controllable compositions, crystal structures, and morphologies is reported. The crystal phase and growth behavior of these tellurides are systematically studied from both experimental and theoretical perspectives. The morphology of Cu_1.29 Te NCs is modified from 1D nanorods with different aspect ratios to 2D nanosheets and 3D nanocubes, by controlling the preferential growth of specific crystalline facets. A controllable phase transition from Cu_1.29 Te to Cu_1.43 Te NCs is also demonstrated. The latter can be further converted into Cu₂ SnTe₃ and SnTe through Sn incorporation. Temperature dependent thermoelectric properties of metal (Cu and Sn) telluride nanostructure thin films are also studied, including Cu_1.29 Te, Cu_1.43 Te, Cu₂ SnTe₃ , and SnTe. Cu₂ SnTe₃ is a low carrier density semimetal with compensating electron and hole Fermi surface pockets. The engineering of crystal phase and morphology control of colloidal copper tin telluride NCs opens a path to explore and design new classes of copper telluride-based nanomaterials for thermoelectrics and other applications.

A facile route toward hydrophilic plasmonic copper selenide nanocrystals: new perspectives for SEIRA applications

Development of versatile and efficient plasmonic nanoprobes for detection of (bio)molecules in an ultrasmall concentration, when applied as substrates in surface-enhanced infrared (SEIRA) spectroscopy.

Dual-Plasmonic Gold@Copper Sulfide Core-Shell Nanoparticles: Phase-Selective Synthesis and Multimodal Photothermal and Photocatalytic Behaviors

Although the intriguing plasmonic properties of noble metal nanoparticles originate from the collective oscillations of free electrons in the conduction band, nanoparticles of doped semiconductors may also exhibit metal-like, plasmonic features that are dictated by the resonantly excited free hole oscillations in the valence band. Here, we combine Au, a representative free electron metal, with copper sulfides, a class of plasmonic p-type semiconductors, in a core-shell nanoparticle geometry to construct dual-plasmonic hetero-nanostructures displaying unique multiplex optical characteristics dominated by plasmonic hole oscillations in the semiconductor shells, plasmonic electron oscillations in the metallic cores, and interband electronic transitions from the valence to conduction bands. Through deliberately designed colloidal synthesis, we are able to selectively grow nanoshells comprising copper sulfides of specifically targeted crystalline phases and Cu/S stoichiometries, such as covellite (CuS), digenite (Cu_1.8S), and nonstoichiometric Cu_2-xS, on the surfaces of Au nanoparticle cores. Our synthetic approach enables us not only to finely control the core and shell dimensions but also to systematically adjust the free hole concentrations in the semiconductor shells, which forms the keystone for the fine tuning of multiple optical resonance modes supported by these hybrid hetero-nanostructures. The dual-plasmonic Au@copper sulfide core-shell nanoparticles exhibit unique multimodal photothermal and photocatalytic behaviors upon selective photoexcitations of different optical transitions at their characteristic resonant frequencies, allowing us to quantitatively evaluate and rigorously compare the intrinsic photothermal and photocatalytic efficacies of multiple types of hot charge carriers, all photoexcited in the same hybrid nanoparticles but with distinct photophysical origins, excited-state lifetimes, energy distributions, and transfer pathways.

Indocyanine green loaded APTMS coated SPIONs for dual phototherapy of cancer

Superparamagnetic iron oxide nanoparticles (SPIONs) have been recently recognized as highly efficient photothermal therapy (PTT) agents. Here, we demonstrate, for the first time to our knowledge, dose and laser intensity dependent PTT potential of small, spherical, 3-aminopropyltrimethoxysilane coated cationic superparamagnetic iron oxide nanoparticles (APTMS@SPIONs) in aqueous solutions upon irradiation at 795 nm. Indocyanine green (ICG) which has been recently used for photodynamic therapy (PDT), was loaded to APTMS@SPIONs to improve the stability of ICG and to achieve an effective mild PTT and PDT (dual therapy) combination for synergistic therapeutic effect on cancer cells via a single laser treatment in the near infrared (NIR). Neither APTMS@SPIONs nor ICG-APTMS@SPIONs showed dark toxicity on MCF7 breast and HT29 colon cancer cell lines. A safe laser procedure was determined as 10 min irradiation at 795 nm with 1.8 W/cm² of laser intensity, at which APTMS@SPION did not cause a significant cell death. However, free ICG reduced cell viability at and above 10 μg/ml under these conditions along with generation of reactive oxygen species (ROS), more effectively in MCF7. ICG-APTMS@SPION treated cells showed 2-fold increase in ROS generation and near complete cell death at and below 5 μg/ml ICG dose, even in less sensitive HT29 cells after a single laser treatment at NIR, which would be safe for the healthy tissue and provide a longer penetration depth. Besides, both components can be utilized for diagnosis and the overall composition may be used for optical-image guided phototherapy in the NIR region.