Promising Fast Energy Transfer System Between Graphene Quantum Dots and the Application in Fluorescent Bioimaging

Regulation of Brightness Attributes of High-Stability Carbon Quantum Dots Applicable in LED Digital Color Display

Fluorescent carbon dots (CDs) attract much attention due to high stability and low toxicity. For high brightness, multi-color emission and fluorescence stability, polystyrene (PS)/CDs composite films were prepared. First, three types of CDs and three PS/CDs films were prepared. Then, three light-emitting-diode (LED) devices were achieved. Compared to CDs solutions, CDs filled films show almost unchanged photoluminescence (PL) spectra. PL peaks of blue, green and red films appear at 462 nm, 544 nm and 603 nm, separately. Blue CDs lead to highest photoluminescence quantum yields (PLQYs) of 76% (solution) and 49% (film). A certain level of thermal stability and fluorescent reversibility of blue film were verified. After 60 days of air exposure, PL intensities of blue and green films reach 97% and 93% of original values, separately. Improving work time cannot vary PL wavelengths of devices. For blue-emitted device, PL intensity reaches 55% of original value after working for 600 min. For green-emitted device, PL intensity reaches 80% after working for 300 min. The novelty is effective PS encapsulation and uniform dispersion of CDs to yield favorable fluorescence properties of devices. This work inspires ideas for large-scale preparation of fluorescent films for LED digital color display.

Recent advances in near-infrared I/II persistent luminescent nanoparticles for biosensing and bioimaging in cancer analysis

Photoluminescent materials (PLNs) are photoluminescent materials that can absorb external excitation light, store it, and slowly release it in the form of light in the dark to achieve long-term luminescence. Developing near-infrared (NIR) PLNs is critical to improving long-afterglow luminescent materials. Because they excite in vitro, NIR-PLNs have the potential to avoid interference from in vivo autofluorescence in biomedical applications. These materials are promising for biosensing and bioimaging applications by exploiting the near-infrared biological window. First, we discuss the biomedical applications of PLNs in the first near-infrared window (NIR-I, 700-900 nm), which have been widely developed and specifically introduce biosensors and imaging reagents. However, the light in this area still suffers from significant light scattering and tissue autofluorescence, which will affect the imaging quality. Over time, fluorescence imaging technology in the second near-infrared window (NIR-II, 1000-1700 nm) has also begun to develop rapidly. NIR-II fluorescence imaging has the advantages of low light scattering loss, high tissue penetration depth, high imaging resolution, and high signal-to-noise ratio, and it shows broad application prospects in biological analysis and medical diagnosis. This critical review collected and sorted articles from the past 5 years and introduced their respective fluorescence imaging technologies and backgrounds based on the definitions of NIR-I and NIR-II. We also analyzed the current advantages and dilemmas that remain to be solved. Herein, we also suggested specific approaches NIR-PLNs can use to improve the quality and be more applicable in cancer research.

Tumor diagnosis using carbon-based quantum dots: Detection based on the hallmarks of cancer

Carbon-based quantum dots (CQDs) have been shown to have promising application value in tumor diagnosis. Their use, however, is severely hindered by the complicated nature of the nanostructures in the CQDs. Furthermore, it seems impossible to formulate the mechanisms involved using the inadequate theoretical frameworks that are currently available for CQDs. In this review, we re-consider the structure-property relationships of CQDs and summarize the current state of development of CQDs-based tumor diagnosis based on biological theories that are fully developed. The advantages and deficiencies of recent research on CQDs-based tumor diagnosis are thus explained in terms of the manifestation of nine essential changes in cell physiology. This review makes significant progress in addressing related problems encountered with other nanomaterials.

N,Si co-doped GQDs: Facile green preparation and application in visual identifying dihydroxybenzene isomers and selective quantification of catechol, hydroquinone and antioxidants

A green economical procedure for preparing N,Si co-doped graphene quantum dots (N,Si-GQDs) using waste toners and ethylene diamine was reported, which not only minimizes waste and promotes recycling but also offers an alternative method for producing N,Si-GQDs. At a pH of 8.5, hydroquinone and catechol underwent oxidation in the presence of air, resulting in the formation of diquinones, specifically p-phenyldiquinone and o-phenyldiquinone. Resorcinol, on the other hand, was converted into monoquinone. The interaction between diquinones and N,Si-GQDs caused a linear fluorescence quenching effect when catechol and hydroquinone were present. However, this effect was minimal in the case of resorcinol. Furthermore, the antioxidants glutathione (GSH) and ascorbic acid (AA) were observed to disrupt the redox equilibrium of catechol and o-phenyldiquinone, leading to the activation of fluorescence. Conversely, hydroquinone and p-phenyldiquinone, due to the highly stable and symmetrical structure of p-phenyldiquinone, did not exhibit this fluorescence activation. Based on the described "Off-On" sensor system, it was possible to visually identify dihydroxybenzene isomers and selectively quantify catechol and hydroquinone in environmental samples, as well as GSH and AA in human serum. The method detection limits were 0.93, 1.35, 2.34, and 1.37 μM for catechol, hydroquinone, GSH, and AA, respectively. In conclusion, the presented procedure offers several advantages, including environmental friendliness, cost-effectiveness, and a means of recycling waste toners. It also demonstrates the successful synthesis of N,Si-GQDs, as well as the potential for their application in the "Off-On" sensor system for the detection and quantification of various analytes.

500 Methylene blue removal with carbon-cage adsorbent produced by hydrazinium azide and comparison of its performance with graphene quantum dot composite

Water pollution, which is an increasing global concern, is one of the significant environmental problems which damage economic growth and the health of billions of people. Therefore, many companies and investigators make an effort to prepare a reusable and cost-effective filter to overcome the problem of water shortages. In this study, we have investigated two adsorbents with high adsorption capacity: a graphene quantum dot-based composite and a carbon-cage adsorbent prepared only with graphite and hydrazinium azide that are expanded through an electrical heater. Both adsorbents were able to remove almost 100% of the methylene blue dye, which is widely used in the textile industry. Adsorption rates and morphology of adsorbents were analyzed with XRD, SEM, EDS, TGA and UV spectrometry measurements.

Structural features regulated photoluminescence intensity and cell internalization of carbon and graphene quantum dots for bioimaging

Carbon-based nanostructures with nanometer dimensions have been identified as potential photoluminescence probes for bioimaging due to their biocompatibility, tunable bandgap, and resistance to photobleaching. However, the influence of structural features of carbon quantum dots (CQDs) and graphene quantum dots (GQDs) in bioimaging has not been explored previously. In the present investigation, we elucidated the mechanism of higher PL in GQDs as compared to CQDs as a function of their structural features. TEM and AFM studies revealed that CQDs were spherical (size ~5 nm), while GQDs showed zigzag edges (size ~3 nm). Further, XRD and NMR studies confirmed that CQDs and GQDs show amorphous and crystalline structures with greater sp² clusters, respectively. While both the QDs demonstrated multicolor fluorescence against variable excitations with similar lifetime, GQDs showed 7-fold higher QY than CQDs. Bioimaging studies in 2D cell culture, 3D tumoroids, and in vivo suggested a greater intensity of fluorescence in GQDs than CQDs. Additionally, rapid cell internalization was observed in GQDs owing to their positive surface potential by heterogeneous atomic (N and S) doping. Moreover, both CQDs and GQDs have demonstrated better time dependent stability for fluorescence properties. Taken together, the proposed mechanism elucidates the greater PL intensity in GQDs due to quantum confinement effect, crystallinity, and surface edge effects and is a better candidate for bioimaging amongst the carbon family.

Carbon-Based Quantum Dots with Solid-State Photoluminescent: Mechanism, Implementation, and Application

Carbon-based quantum dots (CQDs), including spherical carbon dots and graphene quantum dots, are an emerging class of photoluminescent (PL) materials with unique properties. Great progress has been made in the design and fabrication of high-performance CQDs, however, the challenge of developing solid-state PL CQDs have aroused great interest among researchers. A clear PL mechanism is the basis for the development of high-performance solid-state CQDs for light emission and is also a prerequisite for the realization of multiple practical applications. However, the extremely complex structure of a CQD greatly limits the understanding of the solid-state PL mechanism of CQDs. So far, a variety of models have been proposed to explain the PL of solid-state CQDs, but they have not been unified. This review summarizes the current understanding of the solid-state PL of solid-state CQDs from the perspective of energy band theory and electronic transitions. In addition, the common strategies for realizing solid-state PL in CQDs are also summarized. Furthermore, the applications of CQDs in the fields of light-emitting devices, anti-counterfeiting, fingerprint detection, etc., are proposed. Finally, a brief outlook is given, highlighting current problems, and directions for development of solid-state PL of CQDs.

Recent Advances on Graphene Quantum Dots for Bioimaging Applications

Being a zero-dimensional (0D) nanomaterial of the carbon family, graphene quantum dots (GQDs) showed promising biomedical applications owing to their ultra-small size, non-toxicity, biocompatibility, excellent photo stability, tunable fluorescence, and water solubility, etc., thus capturing a considerable attention in biomedical field. This review summarizes the recent advances made in the research field of GQDs and place special emphasis on their bioimaging applications. We briefly introduce the synthesis strategies of GQDs, including top-down and bottom-up strategies. The bioimaging applications of GQDs are also discussed in detail, including optical [fluorescence (FL)], two-photon FL, magnetic resonance imaging (MRI), and dual-modal imaging. In the end, the challenges and future prospects to advance the clinical bioimaging applications of GQDs have also been addressed.

Polarizing Graphene Quantum Dots toward Long-Acting Intracellular Reactive Oxygen Species Evaluation and Tumor Detection

The evaluation of intracellular reactive oxygen species (ROS) would greatly deepen the understanding of cell metabolism/proliferation and tumor detection. However, current long-acting level tracking techniques for intracellular ROS remain unsuited to practical applications. To solve this problem, we synthesized cyclotriphosphazene-doped graphene quantum dots (C-GQDs) whose quantum yield is highly sensitive to ROS (increased by 400% from 0.12 to 0.63). Electron cloud polarization of oxidized cyclotriphosphazene rings in C-GQDs is confirmed to account for this novel optical property by density functional theory calculations and experimental results. In combination with excellent biological stability, C-GQDs achieve a long-acting evaluation of intracellular ROS level (more than 72 h) with an accuracy of 98.3%. In addition, recognition rates exceeding 90% are demonstrated to be feasible for eight kinds of tumor cell lines cultured with C-GQDs, which can also be expanded to in vivo detection. C-GQDs also show a high recognition rate (82.33%) and sensitivity (79.65%) for tumor cells in blood samples.

Theoretical insights into the effect of pristine, doped and hole graphene on the overall performance of dye-sensitized solar cells

Graphene, a promising two-dimensional carbon material, has been extensively employed in dye-sensitized solar cells (DSSCs) with encouraging results.

Fluorescence Solvatochromism of Carbon Dot Dispersions Prepared from Phenylenediamine and Optimization of Red Emission

Fluorescent carbon dots (CDs) are of interest as a promising alternative to quantum dots, partly because they do not include heavy metals. However, most CDs exhibit blue or green emission, while red-emitting CDs are required for a variety of applications. In the present work, CDs were synthesized by refluxing three phenylenediamine (PD) isomers with amino groups at different positions (o-PD, m-PD, and p-PD) in diphenyl ether at 250 °C for 4 h. Upon dispersing the resulting CDs in eight solvents with different polarities, emission colors ranging from green to red were observed. Among these CDs, p-PD-derived CDs exhibited both the longest emission wavelength range, from 538 to 635 nm, and the highest absolute red photoluminescence quantum yield (PLQY) of 15%. Herein the results are discussed based on a comparison of the polymerization processes of o-PD, m-PD, and p-PD. This work demonstrated that the optimum reaction time was 2 h, which yields a p-PD-derived CD dispersion in methanol with red emission and an absolute PLQY as high as 18%. Additionally, the use of 1-decanol and deuterated methanol in place of methanol improved the maximum absolute PLQY to 25% and 36%, respectively. These improved values are attributed to reduced concentration quenching by suppression of π-π stacking interactions and inhibition of the nonradiative relaxation process through the vibration of OH groups, respectively.

Graphene Quantum Dots for Optical Bioimaging

Graphene quantum dots (GQDs) have shown great potential in bioimaging applications due to their excellent biocompatibility, low cytotoxicity, feasibility for surface functionalization, physiological stability, and tunable fluorescence properties. This Review first introduces the intriguing optical properties of GQDs that are suitable for biological imaging, and is followed by the GQDs' synthetic strategies. The emergent and latest development methods for tuning GQDs' optical properties are further described in detail. The recent advanced applications of GQDs in vitro, particularly in cell imaging, targeted imaging, and theranostic nanoplatform fabrication, are included. The applications of GQDs for in vivo bioimaging are also covered. Finally, the Review is concluded with the challenges and prospectives that face this nascent yet exciting field.