Fast Capture of Fluoride by Anion-Exchange Zirconium-Graphene Hybrid Adsorbent

Strategic optimization of phase-selective thermochemically amended terra-firma originating from excavation-squander for geogenic fluoride adsorption: a combined experimental and in silico approach

An inimitable adsorbent "FI-TM-BWCC," emanated from meta-phase-selective thermochemical modulation of excavation-squander (mine waste)-derived terra-firma (blackish white china clay, i.e., BWCC), is explored in the present work for fluoride (F^-) adsorption purpose. FI-TM-BWCC portrayed an excellent adsorption efficiency (95% removal capacity and Q_e: 99 mg/g, at initial adsorbate dose: 10 mg/L, pH: 7±0.5, adsorbent dosage: ~600 mg, exposure time: 60 min). At identical experimental conditions, the F^- scavenging phenomenon was superior than two analogous adsorbents: (i) biopolymer chitosan and glutaraldehyde cross-linked BWCC (CG@BWCC, wherein F^- removal efficiency: 74%) and (ii) meta-phase-selective thermally moduled BWCC (TM-BWCC, removal efficiency: 75%). BWCC predominantly comprises kaolinite and a trace amount of anatase along with prime elemental compositions: 41.71% Al₂O₃, 49.80 % SiO₂, 4.25% Fe₂O₃, and 3.93% TiO₂, as revealed by PXRD and XRF analyses. The thermochemical modulation pathway significantly escalated the BET surface area of BWCC (~11.92 m²/g, avg. pore radius: 23.64 Å, i.e., mesoporous in nature) to FI-TM-BWCC (216.95 m²/g, avg. pore radius: 31.41 Å). The fluoride-adsorbed F^-•••FI-TM-BWCC species revealed a reduced surface area of 21.5 m²/g, which was explained in the light of ion exchange pathway on FI-TM-BWCC's non-uniform surface (surface roughness/S_A of 1597 nm, reduced to 1179 nm after F^- uptake). The spontaneous F^-•••FI-TM-BWCC interaction (ΔG⁰ = -6.25 kJ) occurred following chemisorption-controlled ion exchange (CCIE) pathway as appearance of a F1s band at 685.5 eV was rationalized for Si-F bond formation; corroborating pseudo second-order (PSO) kinetics and resembling Freundlich isotherm. The usefulness of FI-TM-BWCC was diversified through field validation with natural groundwater specimens and proposition of a gravity-fed defluoridation unit. The flow rate was documented to be ~11 liters per hour (LPH) by implementing viscous turbulence fluent model. The experimental findings certainly followed the premise conventions of sustainability metrics upholding socio-economic equipoise.

Decorating Zirconium on Graphene Oxide to Design a Multifunctional Nanozyme for Eco-Friendly Detection of Hydrogen Peroxide

Peroxidase enzymes are crucial in analytical chemistry owing to significant peroxide analytes and their key role in hydrogen peroxide (H2O2) detection. Therefore, exploiting appropriate catalysts for the peroxidase like reactions has become crucial for achieving desired analytical performance. Zirconium (Zr) has attracted growing interest, as a safe and stable potential eco-friendly catalyst for various organic transformations that address increasing environmental challenges. Hence, aiming at fast, sensitive and selective optical detection of H2O2, a colorimetric platform is presented here, based on the excellent peroxidase enzyme-like activity of Zr decorated on graphene oxide (GO). The synergistic effect achieved due to intimate contact between an enzyme like Zr and the high surface area 0f GO ensures efficient electron transfer that increases the chemical and catalytic activity of the composite and advances the decomposition of H2O2 into hydroxyl radicals. The designed probe, thus, efficiently catalyzes the oxidation of 3,3′,5,5′-tetramethylbenzidine (TMB), via hydroxyl radicals, thereby transforming the colorless TMB into blue oxidized TMB within 2 min. The catalytic mechanism of the Zr-GO enzyme mimic is proposed herein and verified using a fluorescent probe terephthalic acid (TA) and other scavenger experiments. The multifunctional optical probe allows sensitive and highly selective recognition of H2O2 in a linear range from 100 to 1000 µM with a low detection limit of 0.57 µM. Essentially, the direct accessibility of Zr prevents having to use the complicated preparation and purification procedures mostly practiced for conventional biozymes and nanozymes. The devised method offers several gains, including being green and an inexpensive catalyst, having lower LOD, being fast, cost-effective and sensitive, and having selective work-up procedures.

Amino Acid Complexes of Zirconium in a Carbon Composite for the Efficient Removal of Fluoride Ions from Water

Amino acid complexes of zirconia represent an entirely new class of materials that were synthesized and studied for the first time for the decontamination of fluoride ion containing aqueous solutions. Glutamic and aspartic acid complexes of zirconia assembled with thin carbon (stacked graphene oxide) platelets deriving from graphite oxide (GO) were synthesized by a two-step method to prepare adsorbents. The characterization of the complexes was carried out using infrared spectroscopy to determine the functional groups and the types of interaction between the composites and fluoride ions. To reveal the mechanisms and extent of adsorption, two types of batch adsorption measurements were performed: (i) varying equilibrium fluoride ion concentrations to construct adsorption isotherms at pH = 7 in the absence of added electrolytes and (ii) using fixed initial fluoride ion concentrations (10 mg/L) with a variation of either the pH or the concentration of a series of salts that potentially interfere with adsorption. The experimental adsorption isotherms were fitted by three different theoretical isotherm equations, and they are described most appropriately by the two-site Langmuir model for both adsorbents. The adsorption capacities of Zr-glutamic acid-graphite oxide and Zr-aspartic acid-graphite oxide are 105.3 and 101.0 mg/g, respectively. We found that two distinct binding modes are combined in the Zr-amino acid complexes: at low solution concentrations, F⁻ ions are preferentially adsorbed by coordinating to the surface Zr species up to a capacity of ca. 10 mg/g. At higher concentrations, however, large amounts of fluoride ions may undergo anion exchange processes and physisorption may occur on the positively charged ammonium moieties of the interfacially bound amino acid molecules. The high adsorption capacity and affinity of the studied dicarboxylate-type amino acids demonstrate that amino acid complexes of zirconia are highly variable materials for the safe and efficient capture of strong Lewis base-type ions such as fluoride.

GO-CeO₂ nanohybrid for ultra-rapid fluoride removal from drinking water

The presence of excess fluoride (F^- > 1.5 mg/L) in drinking water affects more than 260 million people globally and leads to dental and skeletal fluorosis among other health problems. This study investigated fluoride removal by graphene oxide-ceria nanohybrid (GO-CeO₂) and elucidated the mechanisms involved. The nanohybrid exhibited ultra-rapid kinetics for fluoride removal and the equilibrium (85% removal, 10 mg F^-/L initial concentration) was achieved within 1 min which is one of the fastest kinetics for fluoride removal reported so far. Fluoride removal by the nanohybrid followed Langmuir isotherm with a maximum adsorption capacity of 8.61 mg/g at pH 6.5 and that increased to 16.07 mg/g when the pH was lowered to 4.0. Based on the experimental results and characterization data, we have postulated that both electrostatic interaction and surface complexation participated in the fluoride removal process. The O^2- ions present in the CeO₂ lattice were replaced by F^- ions to make a coordination compound (complex). While both Ce⁴⁺ and Ce³⁺ were present in ceria nanoparticles (CeO₂ NPs), Ce³⁺ participated in fluoride complexation. During fluoride removal by GO-CeO₂, the GO sheets acted as electron mediators and help to reduce Ce⁴⁺ to Ce³⁺ at the CeO₂ NPs-GO interface, and the additional Ce³⁺ enhanced fluoride removal by the nanohybrid.

Highly efficient fluoride removal from water using 2D metal-organic frameworks MIL-53(Al) with rich Al and O adsorptive centers

In this study, metal-organic framework MIL-53(Al) was synthesized and studied to understand the different mechanisms between normal MIL-53(Al) and 2D metal-organic framework MIL-53(Al) for removing fluoride. Comparatively, the 2D MIL-53(Al) had two-dimensional linear morphology rather than block shape, indicating more expose adsorptive sites than normal MIL-53(Al). The batch adsorption experiments were applied to investigate the performance of 2D MIL-53(Al), including pH, adsorption kinetics, and thermodynamics. The 2D MIL-53(Al) (75.50 mg/g) showed better adsorption capacity than normal MIL-53(Al) (35.63 mg/g). The adsorption process of 2D MIL-53(Al) followed the pseudo-first-order model and Langmuir model. The adsorption mechanism of this material was further studied by using experimental characterization and density functional theory calculations in detail. The main adsorptive sites were Al and O in the 2D MIL-53(Al), and the relationship between fluoride binding with Al and O was HF₂ ^- > HF > F^-. The species of fluoride were HF₂ ^-, HF, F at different pH and concentrations. Hence, this study provides a significant way on the application of two-dimensional materials for removing fluoride.

Removal of fluoride from industrial wastewater by using different adsorbents: A review

Many industries such as iron and steel metallurgy, copper and zinc smelting, the battery industry, and cement manufacturing industries discharge high concentrations of fluoride-containing wastewater into the environment. Subsequently, the discharge of high fluoride effluent serves as a threat to human life as well as the ecological ability to sustain life. This article analyses the advantages and drawbacks of some fluoride remediation technologies such as precipitation and flocculation, membrane technology, ion exchange technology, and adsorption technology. Among them, adsorption technology is considered the obvious choice and the best applicable technology. As such, several adsorbents with high fluoride adsorption capacity such as modified alumina, metal oxides, biomass, carbon-based materials, metal-organic frameworks, and other adsorption materials including their characteristics have been comprehensively summarized. Additionally, different adsorption conditions of the various adsorbents, such as pH, temperature, initial fluoride concentration, and contact time have been discussed in detail. The study found out that the composite synergy between different materials, morphological and structural control, and the strengthening of their functional groups can effectively improve the ability of the adsorbents for removing fluoride. This study has prospected the direction of various adsorbents for removing fluoride in wastewater, which would serve as guiding significance for future research in the field.

Adsorptive, kinetics and regeneration studies of fluoride removal from water using zirconium-based metal organic frameworks

Fluoride contamination has been recognised as one of the major problems worldwide, imposing a serious threat to human health and affecting the safety of drinking water. Adsorption is one of the widely considered appropriate technologies for water defluorination. The present study describes the preparation of a zirconium-based metal organic framework (MOF-801) adsorbent using a solvothermal method and its adsorption efficiency for removal of fluoride ions from water. The morphology of MOF-801 was characterized by PXRD, FESEM and XPS, and the pore structure and surface area were calculated according to BET. It was found that the synthesized MOF-801 showed the distinguishable octahedral shape particle with a lattice spacing of 0.304 nm, indicative of (011) planes of ZrO₂. Adsorption studies were carried out to study the defluorination effectiveness by varying contact time (30–150 min), adsorbent dose (0.3–1.5 g L⁻¹), adsorbate concentration (5–25 mg L⁻¹), as well as kinetics and isotherms. The maximum removal efficiency for fluoride using MOF-801 at equilibrium was found to be 92.3%. Moreover, the adsorption kinetic studies indicate that the overall fluoride adsorption process was best described by pseudo-second-order kinetics. The adsorption data were well-fitted with the Langmuir isotherm model (R² = 0.9925) with maximum adsorption capacity of 19.42 mg g⁻¹. The synthesized MOF-801 had good reusability and was used in up to four cycles for fluoride removal attaining around 79% removal efficiency after the fourth cycle. All the results suggested that the synthesized MOF-801 has potential to be an excellent adsorbent for wastewater defluorination treatment.

A facile solvothermal method is used to prepare octahedral MOF-801 with a lattice spacing of 0.304 nm representative of ZrO₂ (011) planes for water defluorination.