4-Carboalkoxylated Polyvalerolactones from Malic Acid: Tough and Degradable Polyesters

Achieving Exceptional Thermal and Hydrolytic Resistance in Chemically Circular Polyesters via In-Chain 1,3-Cyclobutane Rings

Polyesters, a highly promising class of circular polymers for achieving a closed-loop sustainable plastic economy, inherently exhibit material stability defects, especially in thermal and hydrolytic instability. Here, we introduce a class of polyesters, P(4R-BL) (R=Ph, Bu), featuring conformationally rigid 1,3-cyclobutane rings in the backbone. These polyesters not only exhibit superior thermostability (Td,5%=376-380 °C) but also demonstrate exceptional hydrolytic resistance with good integrity even after 1 year in basic and acidic aqueous solutions, distinguishing themselves from typical counterparts. Tailoring the flexibility of the side group R enables the controlled thermal and mechanical performance of P(4Ph-BL) and P(4Bu-BL) to rival durable syndiotactic polystyrene (SPS) and low-density polyethylene (LDPE), respectively. Significantly, despite their high stability, both polyesters can be effectively depolymerized into pristine monomers, establishing a circular life cycle.

Fully Bio-based Poly(ketal-ester)s by Ring-opening Polymerization of a Bicylcic Lactone from Glycerol and Levulinic Acid

A fully renewable bio-based bicyclic lactone containing a five-membered cyclic ketal moiety, 7-methyl-3,8,10-trioxabicyclo[5.2.1]decan-4-one (TOD), was synthesized through a two-step acid-catalyzed process from glycerol and levulinic acid. The ring-opening polymerization (ROP) of TOD at 30°C with benzyl alcohol (BnOH) as the initiator and 1,5,7-triazabicyclo[4.4.0]dec-5-ene (TBD) as the catalyst can afford high molar mass PTOD with a cis-2.4-disubstitued 2-methyl 1,3-dioxolane moiety in its repeating unit. PTOD is an amorphous polymer with a glass transition temperature (T_g ) of 13°C. It can be hydrolyzed into structurally defined small molecules under acidic or basic conditions by the selective cleavage of either the cyclic ketal or the ester linkage respectively. The TBD-catalyzed copolymerization of L-lactide (L-LA) and TOD at -20°C was investigated. It was confirmed that L-LA polymerized quickly with racemization to form PLA, followed by a slow incorporation of TOD into the formed PLA chains via transesterification. By varying the feed ratios of L-LA to TOD, a series of random copolymers (PLA-co-PTOD) with different TOD incorporation ratios and tunable T_g s were obtained. Under acidic conditions, PLA-co-PTOD degrades much faster than PLA via the selective cleavage of the cyclic ketal linkages. This work provides insights for the development of more sustainable and acid-accelerated degradable alternatives to aliphatic polyesters.

A circular polyester platform based on simple gem-disubstituted valerolactones

Geminal disubstitution of cyclic monomers is an effective strategy to enhance the chemical recyclability of their polymers, but it is utilized for that purpose alone and often at the expense of performance properties. Here we present synergistic use of gem-α,α-disubstitution of available at-scale, bio-based δ-valerolactones to yield gem-dialkyl-substituted valerolactones ([Formula: see text]), which generate polymers that solve not only the poor chemical recyclability but also the low melting temperature and mechanical performance of the parent poly(δ-valerolactone); the gem-disubstituted polyesters ([Formula: see text]) therefore not only exhibit complete chemical recyclability but also thermal, mechanical and transport properties that rival or exceed those of polyethylene. Through a fundamental structure-property study that reveals intriguing impacts of the alkyl chain length on materials performance of [Formula: see text], this work establishes a simple circular, high-performance polyester platform based on [Formula: see text] and highlights the importance of synergistic utilization of gem-disubstitution for enhancing both chemical recyclability and materials performance of sustainable polyesters.

MALINTO: A New MALDI Interpretation Tool for Enhanced Peak Assignment and Semiquantitative Studies of Complex Synthetic Polymers

The newly developed MALDI interpretation tool ("MALINTO") allows for the accelerated characterization of complex synthetic polymers via MALDI mass spectrometry. While existing software provides solutions for simple polymers like poly(ethylene glycol), polystyrene, etc., they are limited in their application on polycondensates synthesized from two different kinds of monomers (e.g., diacid and diol in polyesters). In addition to such A₂ + B₂ polycondensates, MALINTO covers branched and even multicyclic polymer systems. Since the MALINTO software works based on input data of monomers/repeating units, end groups, and adducts, it can be applied on polymers whose components are previously known or elucidated. Using these input data, a list with theoretically possible polymer compositions and resulting m/z values is calculated, which is further compared to experimental mass spectrometry data. For optional semiquantitative studies, peak areas are allocated according to their assigned polymer composition to evaluate both comonomer and terminating group ratios. Several tools are implemented to avoid mistakes, for example, during peak assignment. In the present publication, the functions of MALINTO are described in detail and its broad applicability on different linear polymers as well as branched and multicyclic polycondensates is demonstrated. Fellow researchers will benefit from the accelerated peak assignment using the freely available MALINTO software and might be encouraged to explore the potential of MALDI mass spectrometry for (semi)quantitative applications.

Advances in the Synthesis of Chemically Recyclable Polymers

The development of modern society is closely related to polymer materials. However, the accumulation of polymer materials and their evolution in the environment causes not only serious environmental problems, but also waste of resources. Although physical processing can be used to reuse polymers, the properties of the resulting polymers are significantly degraded. Chemically recyclable polymers, a type of polymer that degrades into monomers, can be an effective solution to the degradation of polymer properties caused by physical recycling of polymers. The ideal chemical recycling of polymers, i. e., quantitative conversion of the polymer to monomers at low energy consumption and repolymerization of the formed monomers into polymers with comparable properties to the original, is an attractive research goal. In recent years, significant progress has been made in the design of recyclable polymers, enabling the regulation of the "polymerization-depolymerization" equilibrium and closed-loop recycling under mild conditions. This review will focus on the following aspects of closed-loop recycling of poly(sulfur) esters, polycarbonates, polyacetals, polyolefins, and poly(disulfide) polymer, illustrate the challenges in this area, and provide an outlook on future directions.

Defining the Macromolecules of Tomorrow through Synergistic Sustainable Polymer Research

Transforming how plastics are made, unmade, and remade through innovative research and diverse partnerships that together foster environmental stewardship is critically important to a sustainable future. Designing, preparing, and implementing polymers derived from renewable resources for a wide range of advanced applications that promote future economic development, energy efficiency, and environmental sustainability are all central to these efforts. In this Chemical Reviews contribution, we take a comprehensive, integrated approach to summarize important and impactful contributions to this broad research arena. The Review highlights signature accomplishments across a broad research portfolio and is organized into four wide-ranging research themes that address the topic in a comprehensive manner: Feedstocks, Polymerization Processes and Techniques, Intended Use, and End of Use. We emphasize those successes that benefitted from collaborative engagements across disciplinary lines.

Fabrication of Biomedical Scaffolds Using Biodegradable Polymers

Degradable polymers are used widely in tissue engineering and regenerative medicine. Maturing capabilities in additive manufacturing coupled with advances in orthogonal chemical functionalization methodologies have enabled a rapid evolution of defect-specific form factors and strategies for designing and creating bioactive scaffolds. However, these defect-specific scaffolds, especially when utilizing degradable polymers as the base material, present processing challenges that are distinct and unique from other classes of materials. The goal of this review is to provide a guide for the fabrication of biodegradable polymer-based scaffolds that includes the complete pathway starting from selecting materials, choosing the correct fabrication method, and considering the requirements for tissue specific applications of the scaffold.

Rapid Synthesis of Chemically Recyclable Polycarbonates from Renewable Feedstocks

We report the rapid, one-pot synthesis of functional polycarbonates derived from renewable alcohols (i.e., glucose tetraacetate, acetyl isosorbide, lauryl alcohol, and ethanol) and a cyclic carbonate bearing an imidazolecarboxylate. This tandem functionalization/ring-opening polymerization strategy can be performed on multigram scale and eliminates the need for rigorous purification and specialized equipment. A wide range of glass transition temperatures (T_g) was accessible from these renewable pendant groups (>75 °C T_g window). We also synthesized several statistical copolycarbonates to show the thermal properties can be tailored with this tandem method. Additionally, we demonstrate a circular polymer economy via chemical recycling to a cyclic carbonate precursor. This work may facilitate development of sustainable polycarbonates with tailored properties that work toward eliminating plastic waste streams.

100th Anniversary of Macromolecular Science Viewpoint: Redefining Sustainable Polymers

Although Staudinger realized makromoleküles had enormous potential, he likely did not anticipate the consequences of their universal adoption. With 6.3 billion metric tons of plastic waste now contaminating our land, water, and air, we are facing an environmental and public health crisis. Synthetic polymer chemists can help create a more sustainable future, but are we on the right path to do so? Herein, a comprehensive literature survey reveals that there has been an increased focus on "sustainable polymers" in recent years, but most papers focus on biomass-derived feedstocks. In contrast, there is less focus on polymer end-of-life fates. Moving forward, we suggest an increased emphasis on chemical recycling, which sees value in plastic waste and promotes a closed-loop plastic economy. To help keep us on the path to sustainability, the synthetic polymer community should routinely seek the systems perspective offered by life cycle assessment.

Ring opening polymerization of β-acetoxy-δ-methylvalerolactone, a triacetic acid lactone derivative

We report here the synthesis and polymerization of a novel disubstituted valerolactone, β-acetoxy-δ-methylvalerolactone, derived from the renewable feedstock triacetic acid lactone (TAL).