Even–Odd Effect in Aliphatic Polycarbonates with Different Chain Lengths: from Poly (Hexamethylene Carbonate) to Poly (Dodecamethylene Carbonate)

Organocatalytic Condensation Polymerization for Synthesis of High Performance Aliphatic Polycarbonate

Aliphatic polycarbonate (APC) with long alkyl segments has received much attention for its biodegradability and biocompatibility. However, owing to its low molecular weight, it usually exhibits poor mechanical properties limiting its application. Here,a novel two-step condensation polymerization procedure by using an organic catalyst (t-BuP2) to synthesize high molecular weight APC is presented. The introduction of branching and hydrogen bonding in the polymerization would significantly improve its thermal and mechanical properties. The APC exhibits a melt temperature ≈80 °C, tensile strength of 17.7 ± 0.9 MPa, and impressive elongation at a break of 1136 ± 25%. This study provides a facile procedure to synthesize high-performance APC via condensation polymerization.

How the Aliphatic Glycol Chain Length Determines the Pseudoeutectic Composition in Biodegradable Isodimorphic poly(alkylene succinate-ran-caprolactone) Random Copolyesters

We synthesize four series of novel biodegradable poly(alkylene succinate-ran-caprolactone) random copolyesters using a two-step ring-opening/transesterification and polycondensation process with ε-caprolactone (PCL) as a common comonomer. The second comonomers are succinic acid derivatives, with variations in the number of methylene groups (nCH2) in the glycol segment, nCH2 = 2, 4, 8, and 12. The obtained copolyesters were poly(ethylene succinate-ran-PCL) (ESxCLy), poly(butylene succinate-ran-PCL) (BSxCLy), poly(octamethylene succinate-ran-PCL) (OSxCLy), and poly(dodecylene succinate-ran-PCL) (DSxCLy). We discovered a new mixed isodimorphic/comonomer exclusion crystallization in ESxCLy copolymers. The BSxCLy, OSxCLy, and DSxCLy copolymers display isodimorphic behavior. Our findings revealed a significant variation in the pseudoeutectic point position, from mixed isodimorphism/comonomer exclusion crystallization to isodimorphism with pseudoeutectic point variation from 54% to up to 90%. Moreover, we established a link between the melting temperature depression slope variation and the comonomer inclusion/exclusion balance, providing valuable insights into the complex topic of isodimorphic random copolymers.

Strong Hydrogen Bonds Sustain Even-Odd Effects in Poly(ester amide)s with Long Alkyl Chain Length in the Backbone

The number of methylene groups between strongly interacting functional groups within polymer repeating units induces even-odd effects on thermal and mechanical properties. However, detailed studies correlating the even-odd effect with structural changes are still lacking. In this work, we establish correlations between the structure and thermal properties of poly(ester amide)s containing long alkyl chain lengths. The even-odd effect impacts the thermal properties, including the melting temperature and crystallinity degree. It influences the spherulitic morphology of poly(ester amide)s, controlling the appearance of banding. We demonstrate that even-odd effects in poly(ester amides)s persist even with 27 CH2 groups within the repeating unit, an effect due to strong hydrogen bonds caused by the amide groups. Our X-ray studies reveal that the even-odd effect originates from changes in the crystalline structure of the materials. This work helps elucidate the role of strong intermolecular interactions (i.e., hydrogen bonding) on the even-odd effect in long-chain poly(ester amides).

Enhancing melt strength and crystallization kinetics in polylactide: Influence of chain topology

The generation of long-chain branches (LCB) in biobased and biodegradable polylactide (PLA) by adding different amounts of a chain extender is studied. The rheological and calorimetric behavior have been used to determine the effect of LCB presence and their topology on PLA melt strength and crystallization behavior. Rheological modeling of linear and non-linear viscoelastic shear and extensional properties identified several possible branched structures. Moreover, remarkable differences were observed for the different topologies regarding the intrinsic non-linear parameters and the intra-cycle elastic and viscous non-linearities. Differential scanning calorimetry and polarized light optical microscopy measurements revealed a significant increase in the nucleation density and rate of PLA with increasing the amount of LCB, albeit they provoke a decrease in the growth rate due to a reduction in chain diffusion. Nevertheless, overall crystallization rate values revealed a predominant effect of nucleation over crystal growth. The introduction of LCB within the chains is highly beneficial as they increase nucleation, crystallinity, and elongational viscosity, thus improving the properties of biodegradable PLA.

Critical Cooling Rate of Fast-Crystallizing Polyesters: The Example of Poly(alkylene trans-1,4-cyclohexanedicarboxylate)

Controlling the cooling rate experienced by a material during a manufacturing process is a challenge and a major issue. Industrial processing techniques are very diverse and may involve a whole range of cooling rates, which are sometimes extremely high for small and/or thin manufactured parts. For polymers, the cooling rate has consequences on both the microstructure and the time-dependent properties. The common cooling rates associated with conventional calorimetric measurements are generally limited to a few tens of degrees per minute. This work combines several calorimetric techniques (DSC, modulated-temperature DSC, stochastically-modulated DSC and Fast Scanning Calorimetry) to estimate the critical cooling rate required to melt-quench fast-crystallizing polyesters to their fully amorphous state, based on the example of a series of poly(alkylene trans-1,4-cyclohexanedicarboxylate) (PCHs) with a number of methylene groups in the main structure of the repeating unit nCH2 varying from 3 to 6. The even-numbered ones require faster cooling rates (about 3000 K s-1 for nCH2 = 4, between 500 and 1000 K s-1 for nCH2 = 6) compared to the odd-numbered ones (between 50 K min-1 and 100 K s-1 for nCH2 = 3, between 10 and 30 K min-1 for nCH2 = 5).

Understanding the Seeded Heteroepitaxial Growth of Crystallizable Polymers: The Role of Crystallization Thermodynamics

Seeded heteroepitaxial growth is a "living" crystallization-driven self-assembly (CDSA) method that has emerged as a promising route to create uniform segmented nanoparticles with diverse core chemistries by using chemically distinct core-forming polymers. Our previous results have demonstrated that crystallization kinetics is a key factor that determines the occurrence of heteroepitaxial growth, but an in-depth understanding of controlling heteroepitaxy from the perspective of crystallization thermodynamics is yet unknown. Herein, we select crystallizable aliphatic polycarbonates (PxCs) with a different number of methylene groups (xCH2, x = 4, 6, 7, 12) in their repeating units as model polymers to explore the effect of lattice match and core compatibility on the seeded growth behavior. Seeded growth of PxCs-containing homopolymer/block copolymer blend unimers from poly(ε-caprolactone) (PCL) core-forming seed platelet micelles exhibits distinct crystal growth behavior at subambient temperatures, which is governed by the lattice match and core compatibility. A case of seeded growth with better core compatibility and a smaller lattice mismatch follows epitaxial growth, where the newly created crystal domain has the same structural orientation as the original platelet substrate. In contrast, a case of seeded growth with better core compatibility but a larger lattice mismatch shows nonepitaxial growth with less-defined crystal orientations in the platelet plane. Additionally, a case of seeded growth with poor core compatibility and larger lattice mismatch results in polydisperse platelet micelles, whereby crystal formation is not nucleated from the crystalline substrate. These findings reveal important factors that govern the specific crystal growth during a seeded growth approach by using compositionally distinct cores, which would further guide researchers in designing 2D segmented materials via polymer crystallization approaches.

Pathologic polyglutamine aggregation begins with a self-poisoning polymer crystal

A long-standing goal of amyloid research has been to characterize the structural basis of the rate-determining nucleating event. However, the ephemeral nature of nucleation has made this goal unachievable with existing biochemistry, structural biology, and computational approaches. Here, we addressed that limitation for polyglutamine (polyQ), a polypeptide sequence that causes Huntington's and other amyloid-associated neurodegenerative diseases when its length exceeds a characteristic threshold. To identify essential features of the polyQ amyloid nucleus, we used a direct intracellular reporter of self-association to quantify frequencies of amyloid appearance as a function of concentration, conformational templates, and rational polyQ sequence permutations. We found that nucleation of pathologically expanded polyQ involves segments of three glutamine (Q) residues at every other position. We demonstrate using molecular simulations that this pattern encodes a four-stranded steric zipper with interdigitated Q side chains. Once formed, the zipper poisoned its own growth by engaging naive polypeptides on orthogonal faces, in a fashion characteristic of polymer crystals with intramolecular nuclei. We further show that self-poisoning can be exploited to block amyloid formation, by genetically oligomerizing polyQ prior to nucleation. By uncovering the physical nature of the rate-limiting event for polyQ aggregation in cells, our findings elucidate the molecular etiology of polyQ diseases.

Challenging Isodimorphism Concepts: Formation of Three Crystalline Phases in Poly(hexamethylene-ran-octamethylene carbonate) Copolymers

In this work, poly(hexamethylene-ran-octamethylene carbonate) copolycarbonates were synthesized by melt polycondensation in a wide range of compositions. The copolymers displayed some of the characteristic isodimorphic thermal behavior, such as crystallization for all the compositions and a pseudoeutectic behavior of the melting temperature (Tm) versus composition. The pseudoeutectic point was located at 33 mol % poly(octamethylene carbonate) (POC) content (i.e., corresponding to the PH67O33C copolymer). Surprisingly, the crystallinities (Xc) for a wide range of copolymer compositions were higher than those of the parent components, a phenomenon that has not been observed before in isodimorphic random copolymers. The structural characterization, performed by wide-angle X-ray scattering (WAXS) and small-angle X-ray scattering experiments, revealed unexpected results depending on composition. On the one hand, the poly(hexamethylene carbonate) (PHC)- and POC-rich copolymers crystallize in PHC- and POC-type crystals, as expected. Moreover, upon cooling and heating, in situ WAXS experiments evidenced that these materials undergo reversible solid-solid transitions [δ-α (PHC) and δ-α-β (POC)] present in the parent components but at lower temperatures. On the other hand, a novel behavior was found for copolymers with 33-73 mol % POC (including the pseudoeutectic point), which are those with higher crystallinities than the parent components. For these copolymers, a new crystalline phase that is different from that of both homopolymers was observed. The in situ WAXS results for these copolymers confirmed that this novel phase is stable upon cooling and heating and does not show any crystallographic feature of the parent components or their solid-solid transitions. FTIR experiments confirmed this behavior, revealing that the new phase adopts a polyethylene-like chain conformation that differs from the trans-dominant ones exhibited by the parent components. This finding challenges the established concepts of isodimorphism and questions whether a combination of crystallization modes (isodimorphism and isomorphism) is possible in the same family of random copolymers just by changing the composition.

Degradable and Recyclable Polyesters from Multiple Chain Length Bio- and Waste-Sourceable Monomers

Monomers sourced from waste or biomass are often mixtures of different chain lengths; e.g. catalytic oxidation of polyethylene waste yields mixtures of dicarboxylic acids (DCAs). Yet, polyesters synthesized from such monomer mixtures have rarely been studied. We report polyesters based on multiple linear aliphatic DCAs, present in chain length distributions that vary in their centers and ranges. We demonstrate that these materials can adopt high-density polyethylene-like solid state structures, and are ductile (e.g. Et 610 MPa), allowing for injection molding, or film and fiber extrusion. Melting and crystallization points of the polyesters show no odd-even effects as dipoles cannot favorably align in the crystal, similar to traditional odd carbon numbered, long-chain DCA polyesters. Biodegradation studies of 13 C-labelled polyesters in soil reveal rapid mineralization, and depolymerization by methanolysis indicates suitability for closed-loop recycling.

Unusual Alternating Crystallization-Induced Emission Enhancement Behavior in Nonconjugated ω-Phenylalkyl Tropylium Salts

The alternating physical properties, especially melting points, of α,ω-disubstituted n-alkanes and their parent n-alkanes had been known since Baeyer's report in 1877. There is, however, no general and comprehensive explanation for such a phenomenon. Herein, we report the synthesis and examination of a series of novel ω-phenyl n-alkyl tropylium tetrafluoroborates, which also display alternation in their physicochemical characters. Despite being organic salts, the compounds with odd numbers of carbons in the alkyl bridge exist as room temperature ionic liquids. In stark contrast to this, the analogues with even numbers of carbons in the linker are crystalline solids. These solid nonconjugated molecules exhibit curious photoluminescent properties, which can be attributed to their ability to form through-space charge-transfer complexes to cause crystallization-induced emission enhancement. Most notably, the compound with the highest photoluminescent quantum yield in this series showed an unusual arrangement of carbocationic dimer in the solid state. A combination of XRD analysis and ab initio calculations revealed interesting insights into these systems.