Strategy of “Block Blends” to Generate Polymeric Thermogels versus That of One-Component Block Copolymer

Poly(l-threonine-co-l-threonine Succinate) Thermogels for Sustained Release of Lixisenatide

Negatively charged poly(l-Thr-co-l-Thr succinate) (PTTs) was developed as a new thermogel. Aqueous PTT solutions underwent thermogelation over a concentration range of 6.0-8.3 wt %. Dynamic light scattering, FTIR, 1H NMR, and COSY spectra revealed the partial strengthening of the β-sheet conformation and the dehydration of PTTs during the transition. Extendin-4 was released from the PTTs thermogel with a large initial burst release, whereas positively charged lixisenatide significantly reduced its initial burst release to 25%, and up to 77% of the dose was released from the gel over 14 days. In vivo study revealed a high plasma concentration of lixisenatide over 5 days and hypoglycemic efficacy was observed for type II diabetic rats over 7-10 days. The biocompatible PTTs were degraded by subcutaneous enzymes. This study thus demonstrates an effective strategy for reducing the initial burst release of protein drugs from thermogels with the introduction of electrostatic interactions between the drug and the thermogel.

Recent advances in regenerative biomaterials

Nowadays, biomaterials have evolved from the inert supports or functional substitutes to the bioactive materials able to trigger or promote the regenerative potential of tissues. The interdisciplinary progress has broadened the definition of 'biomaterials', and a typical new insight is the concept of tissue induction biomaterials. The term 'regenerative biomaterials' and thus the contents of this article are relevant to yet beyond tissue induction biomaterials. This review summarizes the recent progress of medical materials including metals, ceramics, hydrogels, other polymers and bio-derived materials. As the application aspects are concerned, this article introduces regenerative biomaterials for bone and cartilage regeneration, cardiovascular repair, 3D bioprinting, wound healing and medical cosmetology. Cell-biomaterial interactions are highlighted. Since the global pandemic of coronavirus disease 2019, the review particularly mentions biomaterials for public health emergency. In the last section, perspectives are suggested: (i) creation of new materials is the source of innovation; (ii) modification of existing materials is an effective strategy for performance improvement; (iii) biomaterial degradation and tissue regeneration are required to be harmonious with each other; (iv) host responses can significantly influence the clinical outcomes; (v) the long-term outcomes should be paid more attention to; (vi) the noninvasive approaches for monitoring in vivo dynamic evolution are required to be developed; (vii) public health emergencies call for more research and development of biomaterials; and (viii) clinical translation needs to be pushed forward in a full-chain way. In the future, more new insights are expected to be shed into the brilliant field-regenerative biomaterials.

dl-Polyalanine as a PEG-Free Thermogel

Thermogelling behavior of aqueous polymer solutions comes from the delicate balance between hydrophilic and hydrophobic moieties of the polymer. Typically, poly(ethylene glycol) (PEG) has been used as a hydrophilic block in most thermogels reported to date. However, recent papers have suggested the potential immunogenicity of PEG-conjugated compounds. Here, we report that aqueous solutions of dl-polyalanine (DL-PA) with a specific molecular weight can exhibit thermogelling behavior. In particular, DL-PA with a molecular weight (M_n) of 6690 Da, DL-PA67, exhibited sol-to-gel transition at the physiologically important temperature range of 30-40 °C. ¹H NMR and FTIR data indicated that the mechanism of thermogelation is related to dehydration and conformational changes of DL-PA67 from random coil to β-sheet structures. Subcutaneous injection of an aqueous DL-PA67 solution into rats confirmed the gel formation and its histocompatibility with mild tissue irritation.

Biodegradable and Injectable Hydrogels in Biomedical Applications

Injectable hydrogels are a unique class of hydrogels that are formed upon injection into living bodies. They possess features of typical hydrogels such as softness, 3D network structures, large contents of water, the ability to load water-soluble substances, and so on. Furthermore, their injectability allows injectable hydrogels to be implanted into living bodies using a syringe in a minimally invasive way. After being loaded with different active substances (drugs, proteins, genes, viruses, cells, etc.), injectable hydrogels have been demonstrated to be potential in many different biomedical applications including controlled release and tissue engineering. However, biodegradability is also an important property of injectable hydrogels and allows removal of the hydrogels after accomplishment of their tasks. In this Perspective, we aim at introducing several different types of biodegradable and injectable hydrogels and compare their differences in properties and applications. Lastly, we also point out some remaining problems and future trends in the field of biodegradable and injectable hydrogels.

Molecular bases for temperature sensitivity in supramolecular assemblies and their applications as thermoresponsive soft materials

Thermoresponsive supramolecular assemblies have been extensively explored in diverse formats, from injectable hydrogels to nanoscale carriers, for a variety of applications including drug delivery, tissue engineering and thermo-controlled catalysis. Understanding the molecular bases behind thermal sensitivity of materials is fundamentally important for the rational design of assemblies with optimal combination of properties and predictable tunability for specific applications. In this review, we summarize the recent advances in this area with a specific focus on the parameters and factors that influence thermoresponsive properties of soft materials. We summarize and analyze the effects of structures and architectures of molecules, hydrophilic and lipophilic balance, concentration, components and external additives upon the thermoresponsiveness of the corresponding molecular assemblies.

Coordination Strategy to Achieve Instant Dissolution of a Biomedical Polymer in Water via Manual Shaking

Organic polymers with condensed long chains are kinetically slow to be dissolved in their solvents, particularly in water, which has significantly hindered their potential applications as soon as an instant...

An oxygen-enriched thermosensitive hydrogel for the relief of a hypoxic tumor microenvironment and enhancement of radiotherapy

The rapid proliferation of tumor cells and tortuous vasculature in solid tumors often bring about a hypoxic tumor microenvironment, which renders tumor cells more resistant to many cancer treatments, including radiotherapy. In this study, an injectable and thermosensitive composite hydrogel composed of perfluorooctanoic acid (PFOA) modified monomethoxy poly(ethylene glycol)-poly(D,L-lactide-co-glycolide) (mPEG-PLGA-PFOA) and perfluorooctyl bromide (PFOB) that presented a thermoreversible sol-gel transition upon heating was developed to deliver exogenous oxygen for the relief of tumor hypoxia and enhancement of radiotherapy. The fluorinated modification of copolymers significantly increased the stability of PFOB in the mPEG-PLGA-PFOA aqueous solution owing to the fluorophilic interaction between PFOB and PFOA-modified copolymers. The introduction of PFOB not only efficiently heightened the oxygen loading capacity of the composite hydrogel, but also endowed it with excellent X-ray opacity, allowing the visual observation of the hydrogel via micro-CT imaging. After peritumoral injection of the oxygen-enriched composite hydrogel, the continuous supply of oxygen effectively relieved tumor hypoxia and down-regulated the expression of hypoxia-inducible factor-1α. Profiting from this, the hyposensitivity of tumor cells to radiation was successfully reversed, and the tumor growth in mice was significantly suppressed and the survival of mice was prolonged when combined with multiple X-ray exposure. As a result, the oxygen-enriched composite hydrogel shows a great potential for radiosensitization to improve the radiotherapeutic efficacy.

Critical adhesion areas of cells on micro-nanopatterns

Cell adhesion to extracellular matrices (ECM) is critical to physiological and pathological processes as well as biomedical and biotechnological applications. It has been known that a cell can adhere on an adhesive microisland only over a critical size. But no publication has concerned critical adhesion areas of cells on microislands with nanoarray decoration. Herein, we fabricated a series of micro-nanopatterns with different microisland sizes and arginine-glycine-aspartate (RGD) nanospacings on a nonfouling poly(ethylene glycol) background. Besides reproducing that nanospacing of RGD, a ligand of its receptor integrin (a membrane protein), significantly influences specific cell adhesion on bioactive nanoarrays, we confirmed that the concept of critical adhesion area originally suggested in studies of cells on micropatterns was justified also on the micro-nanopatterns, yet the latter exhibited more characteristic behaviors of cell adhesion. We found increased critical adhesion areas of human mesenchymal stem cells (hMSCs) on nanoarrayed microislands with increased RGD nanospacings. However, the numbers of nanodots with respect to the critical adhesion areas were not a constant. A unified interpretation was then put forward after combining nonspecific background adhesion and specific cell adhesion. We further carried out the asymptotic analysis of a series of micro-nanopatterned surfaces to obtain the effective RGD nanospacing on unpatterned free surfaces with densely grafted RGD, which could be estimated nonzero but has never been revealed previously without the assistance of the micro-nanopatterning techniques and the corresponding analysis.

ELECTRONIC SUPPLEMENTARY MATERIAL

Supplementary materials and methods (details of fabrication of micro-nanopatterns), and supplementary results (selective adhesion or localization of hMSCs on nanoarrayed microislands with non-fouling background, calculation of critical number of integrin-ligand binding N*, etc.) are available in the online version of this article at 10.1007/s12274-021-3711-6.

PEG-based thermosensitive and biodegradable hydrogels

Injectable thermosensitive hydrogels are free-flowing polymer solutions at low or room temperature, making them easy to encapsulate the therapeutic payload or cells via simply mixing. Upon injection into the body, in situ forming hydrogels triggered by body temperature can act as drug-releasing reservoirs or cell-growing scaffolds. Finally, the hydrogels are eliminated from the administration sites after they accomplish their missions as depots or scaffolds. This review outlines the recent progress of poly(ethylene glycol) (PEG)-based biodegradable thermosensitive hydrogels, especially those composed of PEG-polyester copolymers, PEG-polypeptide copolymers and poly(organophosphazene)s. The material design, performance regulation, thermogelation and degradation mechanisms, and corresponding applications in the biomedical field are summarized and discussed. A perspective on the future thermosensitive hydrogels is also highlighted. STATEMENT OF SIGNIFICANCE: Thermosensitive hydrogels undergoing reversible sol-to-gel phase transitions in response to temperature variations are a class of promising biomaterials that can serve as minimally invasive injectable systems for various biomedical applications. Hydrophilic PEG is a main component in the design and fabrication of thermoresponsive hydrogels due to its excellent biocompatibility. By incorporating hydrophobic segments, such as polyesters and polypeptides, into PEG-based systems, biodegradable and thermosensitive hydrogels with adjustable properties in vitro and in vivo have been developed and have recently become a research hotspot of biomaterials. The summary and discussion on molecular design, performance regulation, thermogelation and degradation mechanisms, and biomedical applications of PEG-based thermosensitive hydrogels may offer a demonstration of blueprint for designing new thermogelling systems and expanding their application scope.

Injectable Thermogel Generated by the "Block Blend" Strategy as a Biomaterial for Endoscopic Submucosal Dissection

Endoscopic submucosal dissection is an established method for the removal of early cancers and large lesions from the gastrointestinal tract but is faced with the risk of perforation. To decrease this risk, a submucosal fluid cushion (SFC) is needed clinically by submucosal injection of saline and so on to lift and separate the lesion from the muscular layer. Some materials have been tried as the SFC so far with disadvantages. Here, we proposed a thermogel generated by the "block blend" strategy as an SFC. This system was composed of two amphiphilic block copolymers in water, so it was called a "block blend". We synthesized two non-thermogellable copolymers poly(d,l-lactide-co-glycolide)-b-poly(ethylene glycol)-b-poly(d,l-lactide-co-glycolide) and blended them in water to achieve a sol-gel transition upon heating in both pure water and physiological saline. We explored the internal structure of the resultant thermogel with transmission electron microscopy, three-dimensional light scattering, ¹³C NMR, fluorescence resonance energy transfer, and rheological measurements, which indicated a percolated micelle network. The biosafety of the synthesized copolymer was preliminarily confirmed in vitro. The main necessary functions as an SFC, namely, injectability of a sol and the maintained mucosal elevation as a gel after injection, were verified ex vivo. This study has revealed the internal structure of the block blend thermogel and illustrated its potential application as a biomaterial. This work might be stimulating for investigations and applications of intelligent materials with both injectability and thermogellability of tunable phase-transition temperatures.

Exploration of possible cell chirality using material techniques of surface patterning

Consistent left-right (LR) asymmetry or chirality is critical for embryonic development and function maintenance. While chirality on either molecular or organism level has been well established, that on the cellular level has remained an open question for a long time. Although it remains unclear whether chirality exists universally on the cellular level, valuable efforts have recently been made to explore this fundamental topic pertinent to both cell biology and biomaterial science. The development of material fabrication techniques, surface patterning, in particular, has afforded a unique platform to study cell-material interactions. By using patterning techniques, chirality on the cellular level has been examined for cell clusters and single cells in vitro in well-designed experiments. In this review, we first introduce typical fabrication techniques of surface patterning suitable for cell studies and then summarize the main aspects of preliminary evidence of cell chirality on patterned surfaces to date. We finally indicate the limitations of the studies conducted thus far and describe the perspectives of future research in this challenging field. STATEMENT OF SIGNIFICANCE: While both biomacromolecules and organisms can exhibit chirality, it is not yet conclusive whether a cell has left-right (LR) asymmetry. It is important yet challenging to study and reveal the possible existence of cell chirality. By using the technique of surface patterning, the recent decade has witnessed progress in the exploration of possible cell chirality within cell clusters and single cells. Herein, some important preliminary evidence of cell chirality is collected and analyzed. The open questions and perspectives are also described to promote further investigations of cell chirality in biomaterials.