Mixed-Ligand Approach to Palladium-Catalyzed Direct Arylation Polymerization: Synthesis of Donor–Acceptor Polymers with Dithienosilole (DTS) and Thienopyrroledione (TPD) Units

Rational Monomer Design for the Synthesis of Conjugated Polymers by Direct Heteroarylation Polymerization

This study focuses on the design concepts that contribute to the C-H activation in bithiophene-flanked monomers incorporating naphthalene diimide (NDI), perylene diimide (PDI), and fluorene (FLU) and their polymerization by direct heteroarylation. Density functional theory (DFT) calculations reveal distinct energy requirements for C-H bond abstraction, which is dictated by the electron-withdrawing strength of the central aromatic core flanked by bithiophene. These provide insights into the reactivity of each monomer for C-H bond activation. Proton NMR spectroscopic experimental results confirm the favorable energetic profiles predicted by DFT, with NDI- and PDI-flanked monomers exhibiting lower energy requirements than fluorene-flanked monomers. Successful polymer synthesis is demonstrated for NDI and PDI, while the fluorene-flanked monomer shows challenges due to its higher energy demands.

Halogen-, oxidant- and directing group-free synthesis of donor-acceptor type conjugated polymers

An intermolecular hydrogen migration from dibutadienylpyridine to dialkynylthiophene catalysed by [Ru(η6-naphthalene)(η4-oxa-bnd)] (oxa-bnd = 9-oxabicyclo[3.3.1]nona-2,6-diene) produces poly(dialkynylthiophene-alt-dibutadienylpyridine). The exact alternating copolymerisation nature is shown by MALDI-TOF MS.

Ru(0)-catalysed cross-dimerisation and -trimerisation of alkynyl- with butadienylheteroarenes

Ru(0)-catalysed cross-dimerisation and -trimerisation give a series of di- and triheteroaryl compounds cross-linked by π-conjugated trienyl groups. Their photochemical behaviour is studied using UV-visible absorption spectra, fluorescence emission spectra, and TD-DFT calculations. The cross-trimer prepared from 2,5-dialkynylthiophene with 2 equiv. of 2-butadienylpyridine shows a longer wavelength shift in the absorption maximum than the cross-trimer prepared from dialkynylbenzene with 1-phenylbutadiene. The solvent effect and the TD-DFT calculations suggest that the planarity of the π-conjugated system contributes more than spontaneous polarization. Namely, in the 5-membered thiophene ring, the conjugated trienyl group extends in the same plane (dihedral angle: -4.0°) as the thienyl group, whereas in the 6-membered benzene ring, the planarity is reduced due to steric hindrance (dihedral angle: -24.1°). Thus, the cross-trimers with a 5-membered heteroaryl centre contribute to longer wavelengths of absorption and fluorescence emission due to the increased planarity of the conjugated trienyl groups.

Synthesis of Conjugated Polymers via Transition Metal Catalysed C-H Bond Activation

Transition metal catalysed C-H bond activation chemistry has emerged as an exciting and promising approach in organic synthesis. This allows us to synthesize a wider range of functional molecules and conjugated polymers in a more convenient and more atom economical way. The formation of C-C bonds in the construction of pi-conjugated systems, particularly for conjugated polymers, has benefited much from the advances in C-H bond activation chemistry. Compared to conventional transition-metal catalysed cross-coupling polymerization such as Suzuki and Stille cross-coupling, pre-functionalization of aromatic monomers, such as halogenation, borylation and stannylation, is no longer required for direct arylation polymerization (DArP), which involve C-H/C-X cross-coupling, and oxidative direct arylation polymerization (Ox-DArP), which involves C-H/C-H cross-coupling protocols driven by the activation of monomers' C(sp² )-H bonds. Furthermore, poly(annulation) via C-H bond activation chemistry leads to the formation of unique pi-conjugated moieties as part of the polymeric backbone. This review thus summarises advances to date in the synthesis of conjugated polymers utilizing transition metal catalysed C-H bond activation chemistry. A variety of conjugated polymers via DArP including poly(thiophene), thieno[3,4-c]pyrrole-4,6-dione)-containing, fluorenyl-containing, benzothiadiazole-containing and diketopyrrolopyrrole-containing copolymers, were summarized. Conjugated polymers obtained through Ox-DArP were outlined and compared. Furthermore, poly(annulation) using transition metal catalysed C-H bond activation chemistry was also reviewed. In the last part of this review, difficulties and perspective to make use of transition metal catalysed C-H activation polymerization to prepare conjugated polymers were discussed and commented.

Recent developments in the synthesis of regioregular thiophene-based conjugated polymers for electronic and optoelectronic applications using nickel and palladium-based catalytic systems

Thiophene-based conjugated polymers are important conjugated polymers due to their exceptional optical and conductive properties, over the past few decades many researchers have designed novel strategies to reach more efficient materials for electronic applications.

Thieno[3,4-c]pyrrole-4,6-dione-based conjugated polymers for organic solar cells

Thieno[3,4-c]pyrrole-4,6-dione (TPD) based conjugated polymers as an electron donor, acceptor and single-component for application in organic solar cells in the past ten years have been intensively reviewed in this Feature Article.

Synthesis of conjugated polymers using aryl-bromides via Cu-catalyzed direct arylation polymerization (Cu-DArP)

The first report on direct arylation polymerization with copper catalysts and aryl-bromide monomers expands the sustainability and practicality of DArP.

Theoretical Calculations for Highly Selective Direct Heteroarylation Polymerization: New Nitrile-Substituted Dithienyl-Diketopyrrolopyrrole-Based Polymers

Direct Heteroarylation Polymerization (DHAP) is becoming a valuable alternative to classical polymerization methods being used to synthesize π-conjugated polymers for organic electronics applications. In previous work, we showed that theoretical calculations on activation energy (E_a) of the C–H bonds were helpful to rationalize and predict the selectivity of the DHAP. For readers’ convenience, we have gathered in this work all our previous theoretical calculations on E_a and performed new ones. Those theoretical calculations cover now most of the widely utilized electron-rich and electron-poor moieties studied in organic electronics like dithienyl-diketopyrrolopyrrole (DT-DPP) derivatives. Theoretical calculations reported herein show strong modulation of the E_a of C–H bond on DT-DPP when a bromine atom or strong electron withdrawing groups (such as fluorine or nitrile) are added to the thienyl moiety. Based on those theoretical calculations, new cyanated dithienyl-diketopyrrolopyrrole (CNDT-DPP) monomers and copolymers were prepared by DHAP and their electro-optical properties were compared with their non-fluorinated and fluorinated analogues.

Synthesis of a 1,2-Dithienylethene-Containing Donor-Acceptor Polymer via Palladium-Catalyzed Direct Arylation Polymerization (DArP)

This paper reports the synthesis of D-A polymers containing 1,2-dithienylethene (DTE) units via palladium-catalyzed direct arylation polymerization (DArP). The reaction of dibromoisoindigo (1-Br) and DTE (2-H), in the presence of Pd₂(dba)₃·CHCl₃ (0.5 mol%), P(2-MeOC₆H₄)₃ (L1) (2 mol%), pivalic acid (1 equiv) as catalyst precursors, and Cs₂CO₃ (3 equiv) as a base affords poly(1-alt-2) with a high molecular weight (Mn up to 44,900). Although, it has been known that monomers, with plural C⁻H bonds, tend to form insoluble materials via direct arylation at undesirable C⁻H positions; the reaction of 1-Br and 2-H cleanly proceeds without insolubilization. The resulting polymer has a well-controlled structure and exhibits good charge transfer characteristics in an organic field-effect transistor (OFET), compared to the polymer produced by Migita⁻Kosugi⁻Stille cross-coupling polymerization. The DArP product displays an ideal linear relationship in the current⁻voltage curve, whereas the Migita⁻Kosugi⁻Stille product shows a VG-dependent change in the charge mobility.

Copper catalyzed synthesis of conjugated copolymers using direct arylation polymerization

As an effort to replace palladium catalysts, we report the first example of a Copper-catalyzed Direct Arylation Polymerization (DArP).

Investigation of green and sustainable solvents for direct arylation polymerization (DArP)

Green solvents, notably cyclopentyl methylether (CPME), are found to be highly effective in Direct Arylation Polymerization (DArP).

Direct heteroarylation polymerization: guidelines for defect-free conjugated polymers

Direct (hetero)arylation polymerization (DHAP) has emerged as a valuable and atom-economical alternative to traditional cross-coupling methods for the synthesis of low-cost and efficient conjugated polymers for organic electronics. However, when applied to the synthesis of certain (hetero)arene-based materials, a lack of C-H bond selectivity has been observed. To prevent such undesirable side-reactions, we report the design and synthesis of new, bulky, phosphine-based ligands that significantly enhance selectivity of the DHAP process for both halogenated and non-halogenated electron-rich and electron-deficient thiophene-based comonomers. To better understand the selectivity issues, density functional theory (DFT) calculations have been performed on various halogenated and non-halogenated electron-rich and electron-deficient thiophene-based comonomers. Calculations showed that the presence of bromine atoms decreases the energy of activation (Ea) of the adjacent C-H bonds, allowing undesirable β-defects for some brominated aromatic units. Both calculations and the new ligands should lead to the rational design of monomers and methods for the preparation of defect-free conjugated polymers from DHAP.

Carbazole-based copolymers via direct arylation polymerization (DArP) for Suzuki-convergent polymer solar cell performance

Direct arylation polymerization (DArP) is used to synthesize a variety of carbazole-based copolymers for evaluation in solar cells.

N-Alkylthienopyrroledione versus benzothiadiazole pulling units in push–pull copolymers used for photovoltaic applications: density functional theory study

Low-band-gap push–pull copolymers are promising donor materials for bulk heterojunction organic solar cells.