Dual Stimuli-Responsive Phenylboronic Acid-Containing Framboidal Nanoparticles by One-Step Aqueous Dispersion Polymerization

Synthesis of Raspberry-like PMMA Particles In a Ternary Solvent Mixture with Binary Initiators

There is continuing interest in the synthesis of raspberry-like polymer particles, among which most of the reports have tended to focus on polymer composite particles, while there are relatively few examples of polymer particles with a single component. In this study, raspberry-like poly(methyl methacrylate)(PMMA) particles were synthesized by a one-step method in a ternary solvent mixture with binary initiators. The effects of different polymerization parameters, including the solvent composition, the initiator composition, the stabilizer component, the polymerization temperature, the stirring rate, and the nature of the monomer, on the morphology and size of the resulting particles were studied. A plausible mechanism for raspberry-like particle formation was suggested based on the monitoring data of the polymerization kinetics. The raspberry-like PMMA particles have a high dispersion stability in a salty aqueous environment.

Highly efficient production and simultaneous purification of d-tagatose through one-pot extraction-assisted isomerization of d-galactose

A one-pot extraction-assisted d-galactose-to-d-tagatose isomerization strategy was proposed based on the selective extraction of d-tagatose by phenylborate anions. 4-Vinylphenylboronic acid was selected with high extraction efficiency and selectivity towards d-tagatose. The extracted sugars could be desorbed through a two-staged stripping process with the purity of d-tagatose significantly increased. In-situ extraction-assisted d-galactose-to-d-tagatose isomerization was implemented for the first time ever reported, and the effect of boron-to-sugar ratio (boron: sugar) was investigated. The conversion yield of d-tagatose at 60 °C increased from ∼ 39 % (boron: sugar = 0.5) to ∼ 56 % (boron: sugar = 1) but then decreased to ∼ 44 % (boron: sugar = 1.5). With temperature increased to 70 °C, the conversion yield of d-tagatose was further improved to ∼ 61 % (boron: sugar = 1.5), with the minimized formation of byproducts. Moreover, high purity (∼83 %) and concentrated d-tagatose solution (∼40 g/L) was obtained after sequential desorption. The proposed extraction-assisted isomerization strategy achieved improving the yield and purity of d-tagatose, proving its feasibility in industrial applications.

Functionalization of Framboidal Phenylboronic Acid-Containing Nanoparticles via Aqueous Suzuki-Miyaura Coupling Reactions

Polymeric nanoparticles with reactive functional groups are an attractive platform for drug carriers that can be conjugated with drugs through a cleavable covalent linkage. Since the required functional groups vary depending on the drug molecule, there is a need for development of a novel post-modification method to introduce different functional groups to polymeric nanoparticles. We recently reported phenylboronic acid (PBA)-containing nanoparticles (BNP) with a unique framboidal morphology created via one-step aqueous dispersion polymerization. Since BNPs have high surface area due to their framboidal morphology and contain a high density of PBA groups, these particles can be used as nanocarriers for drugs that can bind to PBA groups such as curcumin and a catechol-bearing carbon monoxide donor. To further explore the potential of BNPs, in this article we report a novel strategy to introduce different functional groups to BNPs via the palladium-catalyzed Suzuki-Miyaura cross-coupling reaction between the PBA groups and iodo- and bromo-coupling partners. We developed a new catalytic system that efficiently catalyzes Suzuki-Miyaura reactions in water without the need for an organic solvent, as confirmed by NMR. Using this catalyst system, we show that BNPs can be functionalized with carboxylic acids, aldehyde, and hydrazide groups while keeping their original framboidal morphology as confirmed via IR, alizarin red assay, and TEM. Furthermore, the potential of the functionalized BNP in drug delivery applications was demonstrated by conjugating the hydrogen sulfide (H₂S)-releasing compound anethole dithiolone to carboxylic acid-functionalized BNPs and show their H₂S-releasing capability in cell lysate.

Bicomponent polymeric micelles for pH-controlled delivery of doxorubicin

Stimuli-responsive drug delivery systems (DDSs) are expected to realize site-specific drug release and kill cancer cells selectively. In this study, a pH-responsive micelle was designed utilizing the pH-sensitivity of borate bonds formed between dopamine and boronic acid. First, methyl (polyethylene glycol)-block-polycaprolactone (mPEG-PCL) was conjugated with 4-cyano-4-(thiobenzoylthio)pentanoic acid (CTP) to obtain a macroinitiator. Two different segments poly(dopamine methacrylamide) (PDMA) and poly(vinylphenylboronic acid) (PVBA) were then grafted to the end of mPEG-PCL. Two triblock copolymers, mPEG-PCL-PDMA and mPEG-PCL-PVBA, were then obtained by reversible addition-fragmentation transfer (RAFT) polymerization. These copolymers and their mixture self-assembled in aqueous solution to form micelles that were able to load hydrophobic anticancer drug doxorubicin (DOX). These two-component micelles were found to be pH-sensitive, in contrast to the one-component micelles. Furthermore, MTT studies showed that the micelles were almost nontoxic. The DOX-loaded micelles showed cytotoxicity equivalent to that of DOX at high concentration. In vivo antitumor experiments showed that this pH-sensitive polymeric micellar system had an enhanced therapeutic effect on tumors. These two-component boronate-based pH micelles are universally applicable to the delivery of anticancer drugs, showing great potential for cancer therapy.

Synthetic strategies for raspberry-like polymer composite particles

The strategies used for the preparation of raspberry-like polymer composite particles are summarized comprehensively.

Non-enzymatic detection of serum glucose using a fluorescent nanopolymer probe

A fluorescent probe is described for the determination of serum glucose after hepatotoxin-induced liver injury. The probe is based on the use of a water-soluble polymer and has been prepared from a multi-functional azlactone polymer as the linker, amino boronic acid, and Alizarin Red as the signalling moiety. The excitation/emission peaks of the polymeric fluorescent probe are at 468/567 nm. Fluorescence is reduced on addition of glucose. Intensity drops linearly in the 0.1 mM to 14 mM glucose concentration range. The probe was applied to non-enzymatic detection of glucose in rat serum after CCl₄-induced liver damage. Graphical abstract A polymer based fluorescent probe has been constructed and applied for non-enzymatic monitoring of serum glucose following hepatotoxin induced liver injury.

Microgels in biomaterials and nanomedicines

Microgels are colloidal particles with crosslinked polymer networks and dimensions ranging from tens of nanometers to micrometers. Specifically, smart microgels are fascinating capable of responding to biological signals in vivo or remote triggers and making the possible for applications in biomaterials and biomedicines. Therefore, how to fundamentally design microgels is an urgent problem to be solved. In this review, we put forward our important fundamental opinions on how to devise the intelligent microgels for cancer therapy, biosensing and biological lubrication. We focus on the design ideas instead of specific implementation process by employing reverse synthesis analysis to programme the microgels at the original stage. Moreover, special insights will be, for the first time, as far as we know, dedicated to the particles completely composed of DNA or proteins into microgel systems. These are discussed in detail in this review. We expect to give readers a broad overview of the design criteria and practical methodologies of microgels according to the application fields, as well as to propel the further developments of highly interesting concepts and materials.

Fructose-sensitive thermal transition behaviour of boronic ester-bearing telechelic poly(2-isopropyl-2-oxazoline)

Boronic ester-bearing telechelic poly(2-isopropyl-2-oxazoline) (B-PiPrOx-B) exhibited a hydrophilic–hydrophobic phase transition near human-body temperature in aqueous media.

Fabrication of glucose-responsive and biodegradable copolymer membrane for controlled release of insulin at physiological pH

A PCL-b-PPBDEMA copolymer membrane can be used as an intelligent carrier to achieve the controlled release of insulin by adjusting the glucose concentration.

Synthesis of high drug loading, reactive oxygen species and esterase dual-responsive polymeric micelles for drug delivery

A novel high drug loading, controlled-release drug delivery system was constructed with dual-stimulus responsive abilities in cells.

Structure-Reactivity Relationships in Boronic Acid-Diol Complexation

Boronic acids have found widespread use in the field of biomaterials, primarily through their ability to bind with biologically relevant 1,2- and 1,3-diols, including saccharides and peptidoglycans, or with polyols to prepare hydrogels with dynamic covalent or responsive behavior. Despite a wide range of boronic acid architectures that have been previously considered, there is a need for greater understanding of the structure-reactivity relationships that govern binding affinity to diols. In this study, various boronic acids and other organoboron compounds were investigated to determine their pK a and their binding constants with the biologically relevant diols including sorbitol, fructose, and glucose. Boronic acid pK a values were determined through spectroscopic titration, whereas binding constants were determined by fluorescence spectroscopy during competitive binding studies. Key structure-reactivity relationships clearly indicated that both boronic acid structure and solution pH must be carefully considered. By considering a variety of boronic acids with systematically varied electronics and sterics, these results provide guidance during selection of organoboron compounds in sensing, delivery, and materials chemistry.

Synthesis and pH-responsive dissociation of framboidal ABC triblock copolymer vesicles in aqueous solution

A series of pH-responsive all-methacrylic ABC triblock copolymer vesicles were prepared from precursor diblock copolymer vesicles via RAFT seeded emulsion polymerisation. Microphase separation between the two hydrophobic membrane-forming B and C blocks produced a distinctive framboidal morphology, for which the mean globule size can be tuned by adjusting the triblock copolymer composition. These vesicles remain intact at neutral pH, but undergo irreversible dissociation on addition of acid as a result of protonation of the tertiary amine groups located within the third block. Small-angle X-ray scattering (SAXS) was utilised to characterise the morphologies formed at pH 8 and pH 3. According to time-resolved SAXS studies, the acid-induced dissociation of these pH-responsive framboidal vesicles involves appreciable membrane swelling within 50 ms and is complete.

Dual-sensitive and biodegradable core-crosslinked HPMA copolymer–doxorubicin conjugate-based nanoparticles for cancer therapy

The nanoplatform of biosafe crosslinked copolymer-NPs efficiently delivers anticancer drugs to tumor cellsviablood circulation.

Responsive Boronic Acid-Decorated (Co)polymers: From Glucose Sensors to Autonomous Drug Delivery

Boronic acid-containing (co)polymers have fascinated researchers for decades, garnering attention for their unique responsiveness toward 1,2- and 1,3-diols, including saccharides and nucleotides. The applications of materials that exert this property are manifold including sensing, but also self-regulated drug delivery systems through responsive membranes or micelles. In this review, some of the main applications of boronic acid containing (co)polymers are discussed focusing on the role of the boronic acid group in the response mechanism. We hope that this summary, which highlights the importance and potential of boronic acid-decorated polymeric materials, will inspire further research within this interesting field of responsive polymers and polymeric materials.

Catechol/boronic acid chemistry for the creation of block copolymers with a multi-stimuli responsive junction

A series of well-defined nitrocatechol and boronic acid end-functionalized homopolymers were synthesized via the RAFT process, followed by their coupling reactions leading to block copolymers integrating a multi-stimuli responsive link in between the blocks.

Synthesis and polymerization of boronic acid containing monomers

This mini-review summarizes the most commonly used methods for the synthesis of phenylboronic acid-(co)polymers ranging from simple straightforward polymerization to complex post-polymerization modification.

Mannose-displaying fluorescent framboidal nanoparticles containing phenylboronic acid groups as a potential drug carrier for macrophage targeting

Functional polymeric nanoparticles have been used for various applications in the biomaterials field. Recently, we reported phenylboronic acid-containing nanoparticles (PBA NPs) having an unique framboidal morphology, prepared in a single-step by the aqueous dispersion polymerization of N-acryloyl-3-aminophenylboronic acid (PBAAM) in the presence of poly(ethylene glycol) acrylamide (PEGAM) as a polymerizable dispersant and N,N'-methylenebisacrylamide (MBAM) as a crosslinker. In this study, we prepared mannosylated and fluorescent PBA NPs that could be used for different applications such as drug delivery and bioimaging. Fluorescent PBA NPs were synthesized by including the fluorescent Nile Blue acrylamide monomer in the reaction mixture during the dispersion polymerization of PBAAM. By using a carboxyl group-bearing PEGAM dispersant, carboxyl group-bearing PBA NPs were prepared that were modified with mannosamine to yield mannosylated PBA NPs. Cellular uptake studies showed that the mannosylated PBA NPs were selectively taken up by murine RAW264.7 macrophages. These results show that PBA NPs allow for flexible modification with various functionalities and could therefore be a potential platform for targeted delivery of drugs to macrophages.