Regulated Fragmentation of Crystalline Micelles of Block Copolymer via Monoamine-Induced Corona Swelling

Surface-Emanated Vertical Organic Semiconducting Nanobrushes

Polymer self-assembly offers an important route to construct well-defined nanostructures. However, it remains challenging to assemble polymers into vertically oriented nanostructures. Here, we use a seed-induced confinement self-assembly strategy to construct vertically aligned semiconducting nanobrushes from polyfluorene-based polymers on conductive substrates. Mechanism studies elucidate that the immobilized seeds on the substrate initiate the vertical growth of nanobrushes, and supercritical drying as well as the rigid charged coronas collectively contribute to retaining the vertical architecture. This process enables nanobrushes with ∼40× higher charge mobilities than their bulk film counterparts. Thus, inverted organic solar cells using the nanobrushes as the electron transporting layer (ETL) exhibit a record power conversion efficiency of 18.51% as a result of increased ETL texturing and the ETL-active layer interface favoring electron extraction. Moreover, our approach also enables the uniform growth of nanobrushes on a nanoporous photoanode (bismuth vanadate) for photoelectrochemical water splitting, improving catalyst distribution and electron transfer. Our work presents a feasible approach to fabricating challenging vertical polymer nanostructures, thereby unlocking the tremendous potential of conjugated polymers in optoelectronic applications.

Precisely Prepared Hierarchical Micelles of Polyfluorene-block-Polythiophene-block-Poly(phenyl isocyanide) via Crystallization-Driven Self-Assembly

The precise preparation of hierarchical micelles is a fundamental challenge in modern materials science and chemistry. Herein, poly(di-n-hexylfluorene)-block-poly(3-tetraethylene glycol thiophene) (poly(1m-b-2n)) diblock copolymers and polyfluorene-block-polythiophene-block-poly(phenyl isocyanide) triblock copolymers were synthesized using a one-pot process via the sequential addition of corresponding monomers using a Ni(II) complex as a single catalyst for living/controlled polymerization. The crystallization-driven self-assembly of amphiphilic conjugated poly(1m-b-2n) led to the formation of nanofibers with controlled lengths and narrow dispersity. The block copolymers exhibited white, yellow, and red emissions in different self-assembly states. By using uniform poly(1m-b-2n) nanofibers as seeds, introducing the polyfluorene-block-polythiophene-block-poly(phenyl isocyanide) triblock polymer as a unimer in the seed growth process, and adjusting the structure of the poly(phenyl isocyanide) block and the polarity of self-assembly solvent, A-B-A triblock micelles, multiarm branched micelles, and raft micelles were prepared.

Regulation of Two-Dimensional Platelet Micelles with Tunable Core Composition Distribution via Coassembly Seeded Growth Approach

Seeded growth termed "living" crystallization-driven self-assembly (CDSA) has been identified as a powerful method to create one- or two-dimensional nanoparticles. Epitaxial crystallization is usually regarded as the growth mechanism for the formation of uniform micelles. From this perspective, the unimer depositing rate is largely related to the crystallization temperature, which is a key factor to determine the crystallization rate and regulate the core composition distribution among nanoparticles. In the present work, the coassembly of two distinct crystallizable polymers is explored in detail in a one-pot seeded growth protocol. Results have shown that polylactone containing a larger number of methylene groups (-CH2-) in their repeating units such as poly(η-octalactone) (POL) has a faster crystallization rate compared to poly(ε-caprolactone) (PCL) with a smaller number of -CH2- at ambient temperature (25 °C), thus a block or blocky platelet structure with heterogeneous composition distribution is formed. In contrast, when the crystallization temperature decreases to 4 °C, the difference of crystallization rate between both cores become negligible. Consequently, a completely random component distribution within 2D platelets is observed. Moreover, we also reveal that the core component of seed micelles is also paramount for the coassembly seeded growth, and a unique structure of flower-like platelet micelle is created from the coassembly of PCL/POL using POL core-forming seeds. This study on the formation of platelet micelles by one-pot seeded growth using two crystallizable components offers a considerable scope for the design of 2D polymer nanomaterials with a controlled core component distribution.

A Versatile Platform to Generate Shell-Cross-Linked Uniform Π-Conjugated Nanofibers with Controllable Length, High Morphological Stability, and Facile Surface Tailorability

Living crystallization-driven self-assembly (CDSA) has emerged as an efficient route to generate π-conjugated-polymer-based nanofibers (CPNFs) with promising applications from photocatalysis to biomedicine. However, the lack of efficient tools to endow CPNFs with morphological stability and surface tailorability becomes a frustrating hindrance for expanding application spectrum of CPNFs. Herein, a facile strategy to fabricate length-controllable OPV-based (OPV = oligo(p-phenylenevinylene)) CPNFs containing a cross-linked shell with high morphological stability and facile surface tailorability through the combination of living CDSA and thiol-ene chemistry by using OPV5 -b-PNAAM32 (PNAAM = poly(N-allyl acrylamide)) as a model is reported. Uniform fiber-like micelles with tunable length can be generated by self-seeding of living CDSA. By taking advantage of radical thiol-ene reaction between vinyls of PNAAM corona and four-arm thiols, the shell of micelles can be cross-linked with negligible destruction of structure of vinylene-containing OPV core. The resulting micelles show high morphological stability in NaCl solution and PBS buffer, even upon heating at 80 °C. The introduced extra thiol groups in the cross-linked shell can be further employed to install extra functional moieties via convenient thiol-Michael-type reaction. Given the negligible cytotoxicity of resulting CPNFs, this strategy opens an avenue to fabricate various CPNFs of diverse functionalities for biomedicine.

Defect-Induced Secondary Crystals Drive Two-Dimensional to Three-Dimensional Morphological Evolution in the Co-Self-Assembly of Polyferrocenylsilane Block Copolymer and Homopolymer

Bottom-up fabrication protocols for uniform 3D hierarchical structures in solution are rare. We report two different approaches to fabricate uniform 3D spherulites and their precursors using mixtures of poly(ferrocenyldimethylsilane) (PFS) block copolymer (BCP) and PFS homopolymer (HP). Both protocols are designed to promote defects in 2D assemblies that serve as intermediate structures. In a multistep seeded growth protocol, we add the BCP/HP mixture to (1D) rod-like PFS micelles in a selective solvent as first-generation seeds. This leads to 2D platelet structures. If this step is conducted at a high supersaturation, secondary crystals form on the basal surface of these platelets. Co-crystallization and rapid crystallization of BCP/HP promote the formation of defects that act as nucleation sites for secondary crystals, resulting in multilayer platelets. This is the key step. The multilayer platelets serve as second-generation seeds upon subsequent addition of BCP/HP blends and, with increasing supersaturation, lead to the sequential formation of uniform (3D) hedrites, sheaves, and spherulites. Similar structures can also be obtained by a simple one-pot direct self-assembly (heating-cooling-aging) protocol of PFS BCP/HP blends. In this case, for a carefully chosen but narrow temperature range, PFS HPs nucleate formation of uniform structures, and the annealing temperature regulates the supersaturation level. In both protocols, the competitive crystallization kinetics of HP/BCP affects the morphology. Both protocols exhibit broad generality. We believe the morphological transformation from 2D to 3D structures, regulated by defect formation, co-crystallization, and supersaturation levels, could apply to various semicrystalline polymers. Moreover, the 3D structures are sufficiently robust to serve as recoverable carriers for nanoparticle catalysts, exhibiting valuable catalytic activity and opening new possibilities for applications requiring exquisite 3D structures.

Understanding the Seeded Heteroepitaxial Growth of Crystallizable Polymers: The Role of Crystallization Thermodynamics

Seeded heteroepitaxial growth is a "living" crystallization-driven self-assembly (CDSA) method that has emerged as a promising route to create uniform segmented nanoparticles with diverse core chemistries by using chemically distinct core-forming polymers. Our previous results have demonstrated that crystallization kinetics is a key factor that determines the occurrence of heteroepitaxial growth, but an in-depth understanding of controlling heteroepitaxy from the perspective of crystallization thermodynamics is yet unknown. Herein, we select crystallizable aliphatic polycarbonates (PxCs) with a different number of methylene groups (xCH2, x = 4, 6, 7, 12) in their repeating units as model polymers to explore the effect of lattice match and core compatibility on the seeded growth behavior. Seeded growth of PxCs-containing homopolymer/block copolymer blend unimers from poly(ε-caprolactone) (PCL) core-forming seed platelet micelles exhibits distinct crystal growth behavior at subambient temperatures, which is governed by the lattice match and core compatibility. A case of seeded growth with better core compatibility and a smaller lattice mismatch follows epitaxial growth, where the newly created crystal domain has the same structural orientation as the original platelet substrate. In contrast, a case of seeded growth with better core compatibility but a larger lattice mismatch shows nonepitaxial growth with less-defined crystal orientations in the platelet plane. Additionally, a case of seeded growth with poor core compatibility and larger lattice mismatch results in polydisperse platelet micelles, whereby crystal formation is not nucleated from the crystalline substrate. These findings reveal important factors that govern the specific crystal growth during a seeded growth approach by using compositionally distinct cores, which would further guide researchers in designing 2D segmented materials via polymer crystallization approaches.

High-resolution cryo-electron microscopy structure of block copolymer nanofibres with a crystalline core

Seeded growth of crystallizable block copolymers and π-stacking molecular amphiphiles in solution using living crystallization-driven self-assembly is an emerging route to fabricate uniform one-dimensional and two-dimensional core-shell micellar nanoparticles of controlled size with a range of potential applications. Although experimental evidence indicates that the crystalline core of these nanomaterials is highly ordered, a direct observation of their crystal lattice has not been successful. Here we report the high-resolution cryo-transmission electron microscopy studies of vitrified solutions of nanofibres made from a crystalline core of poly(ferrocenyldimethylsilane) (PFS) and a corona of polysiloxane grafted with 4-vinylpyridine groups. These studies show that poly(ferrocenyldimethylsilane) chains pack in an 8-nm-diameter core lattice with two-dimensional pseudo-hexagonal symmetry that is coated by a 27 nm 4-vinylpyridine corona with a 3.5 nm distance between each 4-vinylpyridine strand. We combine this structural information with a molecular modelling analysis to propose a detailed molecular model for solvated poly(ferrocenyldimethylsilane)-b-4-vinylpyridine nanofibres.

Precision polymer nanofibers with a responsive polyelectrolyte corona designed as a modular, functionalizable nanomedicine platform

We describe the development of a modular, functionalizable platform for biocompatible core-shell block copolymer nanofibers of controlled length (22 nm – 1.3 μm) and low dispersity produced via living crystallization-driven...

π-Conjugated-polymer-based nanofibers through living crystallization-driven self-assembly: preparation, properties and applications

π-Conjugated-polymer-based nanofibers (CPNFs) of controlled length, composition and morphology are promising for a broad range of emerging applications in optoelectronics, biomedicine and catalysis, owing to the morphological merits of fiber-like nanostructures and structural attributes of π-conjugated polymers. Living crystallization-driven self-assembly (CDSA) of π-conjugated-polymer-containing block copolymers (BCPs) has emerged as an efficient strategy to prepare CPNFs with precise dimensional and structural controllability by taking advantage of the crystallinity of π-conjugated polymers. In this review, recent advances in the generation of CPNFs have been highlighted. The influence of the structure of π-conjugated-polymer-containing BCPs and experimental conditions on the CDSA behaviors, especially seeded growth and self-seeding processes of living CDSA, has been discussed in detail, aiming to provide an in-depth overview of living CDSA of π-conjugated-polymer-containing BCPs. In addition, the properties of CPNFs as well as their potential applications have been illustrated. Finally, we put forward the current challenges and research directions in the field of CPNFs.

Emerging applications for living crystallization-driven self-assembly

The use of crystallization as a tool to control the self-assembly of polymeric and molecular amphiphiles in solution is attracting growing attention for the creation of non-spherical nanoparticles and more complex, hierarchical assemblies. In particular, the seeded growth method termed living crystallization-driven self-assembly (CDSA) has been established as an ambient temperature and potentially scalable platform for the preparation of low dispersity samples of core-shell fiber-like or platelet micellar nanoparticles. Significantly, this method permits predictable control of size, and access to branched and segmented structures where functionality is spatially-defined. Living CDSA operates under kinetic control and shows many analogies with living chain-growth polymerizations of molecular organic monomers that afford well-defined covalent polymers of controlled length except that it covers a much longer length scale (ca. 20 nm to 10 μm). The method has been applied to a rapidly expanding range of crystallizable polymeric amphiphiles, which includes block copolymers and charge-capped homopolymers, to form assemblies with crystalline cores and solvated coronas. Living CDSA seeded growth methods have also been transposed to a wide variety of π-stacking and hydrogen-bonding molecular species that form supramolecular polymers in processes termed "living supramolecular polymerizations". In this article we outline the main features of the living CDSA method and then survey the promising emerging applications for the resulting nanoparticles in fields such as nanomedicine, colloid stabilization, catalysis, optoelectronics, information storage, and surface functionalization.

Dimension control on self-assembly of a crystalline core-forming polypeptoid block copolymer: 1D nanofibers versus 2D nanosheets

The balance between the crystallization and solubility of the block copolymer dominates the nanostructures.

Interfacial self-assembly of amphiphilic conjugated block copolymer into 2D nanotapes

In the present work, the evaporation-induced interfacial self-assembly behavior of an amphiphilic conjugated polymer, poly(3-hexylthiophene)-b-poly(acrylic acid) (P3HT-b-PAA), at the oil-water interface is explored. Novel 2D nanotapes of P3HT-b-PAA are prepared via the interfacial self-assembly. It is inferred that P3HT segments adopt a special conformation at the oil-water interface, which facilitates the packing of alkyl side chains and π-π interaction. The UV-vis spectrum further confirms that the ordering degree of P3HT segments is increased while transmission IR and Raman spectroscopic studies suggest that the P3HT chains adopt a more planar conformation at the oil-water interface. It is proposed that the formation of the nanotapes is driven by the ordered packing of the P3HT chains at the oil-water interface. Finally, the packing model of the P3HT chains inside the nanotapes is roughly proposed.