Determination of Mechanical Properties of Polymer Interphase Using Combined Atomic Force Microscope (AFM) Experiments and Finite Element Simulations

Functionalized Hydroxyapatite Loading Enhances the Mechanical and Biodegradation Properties of Wet-Spun Poly(Lactide-co-Glycolide) Scaffolds by Additive Manufacturing

Additive manufacturing of biodegradable composite materials is an effective strategy for the development of tailored scaffolds for bone tissue engineering. This research activity is aimed at the development of poly(D,L-lactide-co-glycolide) (PLGA) scaffolds loaded with hydroxyapatite (HA) by means of a novel additive manufacturing approach. For this purpose, HA particles are functionalized through PLGA grafting (PgHA) to increase their compatibility with the polymeric matrix. PgHA-loaded PLGA scaffolds show higher tensile and compressive moduli than analogous PLGA scaffolds non-loaded with the ceramic phase, as well as a higher elongation at break than PLGA scaffolds loaded with non-functionalized HA. In addition, PgHA-loaded scaffolds maintain their structural stability in vitro for a longer time (9 weeks) than the other two kinds of scaffold. All the developed scaffolds support in vitro preosteoblast viability and differentiation toward the osteoblastic phenotype. The obtained results encourage therefore future research on the developed composite scaffolds for personalized bone tissue engineering approaches.

Mechanical properties of freestanding few-layer graphene/boron nitride/polymer heterostacks investigated with local and non-local techniques

van der Waals two-dimensional materials and heterostructures combined with polymer films continue to attract research attention to elucidate their functionality and potential applications. This study presents the fabrication and mechanical testing of 2D material heterostacks, consisting of few-layer boron nitride and graphene heterostructures synthesized via chemical vapor deposition, capped with a polymethyl methacrylate layer and suspended across ∼200 μm wide trenches using a combined wet-dry transfer method. The mechanical characterization of the heterostacks was performed using two independent approaches: (a) non-local testing with a custom-built tensile testing platform and (b) local load-displacement testing employing atomic force microscopy probes, complemented by finite element simulations. Both approaches provided new results, which are in good agreement with each other. Overall, our findings offer new insights into a combined load capacity in complex multi-material two-dimensional systems, and can contribute to advancing micro and nano-scale device designs and implementations.

Morphology-Driven Nanofiller Size Measurement Integrated with Micromechanical Finite Element Analysis for Quantifying Interphase in Polymer Nanocomposites

This study focused on an innovative practical method using computer vision for particle size measurement, which serves as a key precursor for predicting the elastic modulus of polymer nanocomposites. This approach involved the morphological segmentation of the nanodispersed phase. It aimed, for the first time, to address the impractical conditions resulting from the assumption of idealized single-particle sizes in a monodispersed system during modeling. Subsequently, a micromechanical finite element framework was employed to determine the interphase thickness and modulus in ultrahigh molecular weight polyethylene/nanozeolite composites, following the quantification of nanoparticle sizes. The size measurement approach relied on morphological images extracted from scanning electron microscopy micrographs of impact-fractured surfaces. To compute the interphase thickness, experimental data was fitted to an interphase-inclusive upper-bound Hashin-Shtrikman model, with the measured average particle size per composition serving as a crucial input. Subsequently, the interphase elastic modulus was computed based on its thickness, employing a hybrid modified-Hashin-Hansen and Maxwell model. These estimated interfacial variables were then utilized as inputs for the finite element model to determine the tensile modulus. A comparison between the model results and measured data revealed a maximum discrepancy of 3.29%, indicating the effectiveness of the methodology employed in quantifying interfacial properties.

Strategies To Modify the Surface and Bulk Properties of 3D-Printed Solid Scaffolds for Tissue Engineering Applications

3D printing is one of the effective scaffold fabrication techniques that emerged in the 21st century that has the potential to revolutionize the field of tissue engineering. The solid scaffolds developed by 3D printing are still one of the most sought-after approaches for developing hard-tissue regeneration and repair. However, applications of these solid scaffolds get limited due to their poor surface and bulk properties, which play a significant role in tissue integration, loadbearing, antimicrobial/antifouling properties, and others. As a result, several efforts have been directed to modify the surface and bulk of these solid scaffolds. These modifications have significantly improved the adoption of 3D-printed solid scaffolds and devices in the healthcare industry. Nevertheless, the in vivo implant applications of these 3D-printed solid scaffolds/devices are still under development. They require attention in terms of their surface/bulk properties, which dictate their functionality. Therefore, in the current review, we have discussed different 3D-printing parameters that facilitate the fabrication of solid scaffolds/devices with different properties. Further, changes in the bulk properties through material and microstructure modification are also being discussed. After that, we deliberated on the techniques that modify the surfaces through chemical and material modifications. The computational approaches for the bulk modification of these 3D-printed materials are also mentioned, focusing on tissue engineering. We have also briefly discussed the application of these solid scaffolds/devices in tissue engineering. Eventually, the review is concluded with an analysis of the choice of surface/bulk modification based on the intended application in tissue engineering.

Fracture Behavior of Polyrotaxane-Toughened Poly(Methyl Methacrylate)

The fracture behavior of polyrotaxane (PR)-modified poly(methyl methacrylate) (PMMA) was investigated. PR is a supramolecule with rings threaded onto a linear backbone chain, which is capped by bulky end groups to prevent the rings from de-threading. The ring structure is α-cyclodextrin (CD), and it can be functionalized to enhance its affinity with the hosting polymer matrix. Adding only 1 wt % of PR containing methacrylate functional groups (mPR) at the terminal of some of the polycaprolactone-grafted chains on CD promotes massive crazing, resulting in a significant improvement in fracture toughness while maintaining the modulus and transparency of the PMMA matrix. Dynamic mechanical analysis and atomic force microscopy studies reveal that mPR strongly interact with PMMA, leading to higher molecular mobility and enhanced molecular cooperativity during deformation. This molecular cooperativity may be responsible for the formation of massive crazing in a PMMA matrix, which leads to greatly improved fracture toughness.

Shell Architecture Strongly Influences the Glass Transition, Surface Mobility, and Elasticity of Polymer Core-Shell Nanoparticles

Despite the growing application of nanostructured polymeric materials, there still remains a large gap in our understanding of polymer mechanics and thermal stability under confinement and near polymer-polymer interfaces. In particular, the knowledge of polymer nanoparticle thermal stability and mechanics is of great importance for their application in drug delivery, phononics, and photonics. Here, we quantified the effects of a polymer shell layer on the modulus and glass-transition temperature (T g) of polymer core-shell nanoparticles via Brillouin light spectroscopy and modulated differential scanning calorimetry, respectively. Nanoparticles consisting of a polystyrene (PS) core and shell layers of poly(n-butyl methacrylate) (PBMA) were characterized as model systems. We found that the high T g of the PS core was largely unaffected by the presence of an outer polymer shell, whereas the lower T g of the PBMA shell layer decreased with increasing PBMA thickness. The surface mobility was revealed at a temperature about 15 K lower than the T g of the PBMA shell layer. Overall, the modulus of the core-shell nanoparticles decreased with increasing PBMA shell layer thickness. These results suggest that the nanoparticle modulus and T g can be tuned independently through the control of nanoparticle composition and architecture.

Temperature effects on the nanoindentation characterization of stiffness gradients in confined polymers

The stiffening of polymers near inorganic fillers plays an important role in strengthening polymer nanocomposites, and recent advances in metrology have allowed us to sample such effects using local mechanical measurement techniques such as nanoindentation and atomic force microscopy. A general understanding of temperature and confinement effects on the measured stiffness gradient length-scale ξ_int is lacking however, which convolutes molecular interpretation of local property measurements. Using coarse-grained molecular dynamics and finite element nanoindentation simulations, we show that the measured ξ_int increases with temperature in highly confined polymer systems, a dependence which acts in the opposite direction in systems with low confinement. These disparate trends are closely related to the polymer's viscoelastic state and the resulting changes in incompressibility and dissipative ability as the polymer transitions from glassy to rubbery. At high temperatures above the glass transition temperature, a geometrically confined system restricts the viscous dissipation of the applied load by the increasingly incompressible polymer. The indentation causes a dramatic build-up of hydrostatic pressure near the confining surface, which contributes to an enlarged measurement of ξ_int. By contrast, a less-confined system allows the pressure to dissipate via intermolecular motion, thus lowering the measured ξ_int with increased temperature above the glass transition temperature. These findings suggest that the well-established thin film-nancomposite analogy for polymer mobility near interfaces can be convoluted when measuring local mechanical properties, as the viscoelastic state and geometric confinement of the polymer can affect the nanomechanical response during indentation purely from continuum effects.