Better RAFT Control is Better? Insights into the Preparation of Monodisperse Surface-Functional Polymeric Microspheres by Photoinitiated RAFT Dispersion Polymerization

The Valence-Dependent Activity of Colloidal Molecules as Ice Recrystallization Inhibitors

Inspired by advances in cryopreservation techniques, which are essential for modern biomedical applications, there is a special interest in the ice recrystallization inhibition (IRI) of the antifreeze protein (AFPs) mimics. There are in-depth studies on synthetic materials mimicking AFPs, from simple molecular structure levels to complex self-assemblies. Herein, we report the valence-dependent IRI activity of colloidal organic molecules (CMs). The CMs were prepared through polymerization-induced particle-assembly (PIPA) of the ABC-type triblock terpolymer of poly(acryloxyethyl trimethylammonium chloride)-b-poly(benzyl acrylate)-b-poly(diacetone acrylamide) (PATAC-b-PBzA-b-PDAAM) at high monomer conversions. Stabilized by the cationic block of PATAC, the strong intermolecular H-bonding and incompatibility of the PDAAM block with PBzA contributed to the in situ formation of Janus particles (AX1) beyond the initial spherical seed particles (AX0), as well as the high valency clusters of linear AX2 and trigonal AX3. Their distribution was controlled mainly by the polymerization degrees (DPs) of PATAC and PDAAM blocks. IRI activity results of the CMs suggest that the higher fraction of AX1 results in the better IRI activity. Increasing the fraction of AX1 from 27% to 65% led to a decrease of the mean grain size from 39.8% to 10.9% and a depressed growth rate of ice crystals by 58%. Moreover, by replacing the PDAAM block with the temperature-responsive one of poly(N-isopropylacrylamide) (PNIPAM), temperature-adjustable IRI activity was observed, which is well related to the reversible transition of AX0 to AX1, providing a new idea for the molecular design of amphiphilic polymer nanoparticle-based IRI activity materials.

Seeded RAFT Polymerization-Induced Self-assembly: Recent Advances and Future Opportunities

Over the past decade, polymerization-induced self-assembly (PISA) has fully proved its versatility for scale-up production of block copolymer nanoparticles with tunable sizes and morphologies; yet, there are still some limitations. Recently, seeded PISA approaches combing PISA with heterogeneous seeded polymerizations have been greatly explored and are expected to overcome the limitations of traditional PISA. In this review, recent advances in seeded PISA that have expanded new horizons for PISA are highlighted including i) general considerations for seeded PISA (e.g., kinetics, the preparation of seeds, the selection of monomers), ii) morphological evolution induced by seeded PISA (e.g., from corona-shell-core nanoparticles to vesicles, vesicles-to-toroid, disassembly of vesicles into nanospheres), and iii) various well-defined nanoparticles with hierarchical and sophisticated morphologies (e.g., multicompartment micelles, porous vesicles, framboidal vesicles, AXn -type colloidal molecules). Finally, new insights into seeded PISA and future perspectives are proposed.

Photo Fenton RAFT Polymerization of (Meth)Acrylates in DMSO Sensitized by Methylene Blue

A novel open-to-air photo RAFT polymerization of a series of acrylate and methacrylate monomers mediated by matching chain transfer agent irradiated by far-red light in DMSO is reported. Hydroxyl radical (•OH) generated from methylene blue (MB) sensitized decomposition of H2 O2 via photo-Fenton like-reaction is used for polymerization initiation. The "living/control" characteristic is evidenced by kinetic study, in which a pseudo first order curve and linearly increases of molecular weight with the increase of monomer conversion are observed. The living end-group fidelity is characterized by MALDI-TOF-MS and 1 H NMR results, and confirmed by successful chain extension. The temporary controllability is proved by light on/off switch experiment.

"Dramatic Growth" of Microbial Aerosols for Visualization and Accurate Counting of Bioaerosols

While the global COVID-19 pandemic has subsided, microbial aerosol detection has become of high concern. Timely, accurate, and highly sensitive monitoring of microbial aerosols in indoor air is the basis for effective prevention and control of infectious diseases. At present, no commercial equipment or reliable technology can simultaneously control the detection time and limit at 6 h and 102 CFU/mL, respectively. Based on the "safety size range" of particulate matter in the air, we propose a new method of microbial dilation detection, which enables the pathogen to grow rapidly and dramatically into a polymeric microsphere, larger in size than the coexisting aerosol particles. "Like a crane standing among chickens", the microorganism can be easily visualized and counted. Different from routine chemical and biological sensing technologies, this method can achieve absolute counting of microbial particles, and the simple principles can be developed into devices for different life scenarios.

Exploiting Wavelength Orthogonality in Photoinitiated RAFT Dispersion Polymerization and Photografting for Monodisperse Surface-Functional Polymeric Microspheres

We report a strategy toward surface-functional polymeric microspheres using a wavelength orthogonality technique that employs photoinitiated reversible addition-fragmentation chain transfer (RAFT) dispersion polymerization and the subsequent photografting under different wavelengths of light. Initial screening of reaction conditions indicated photoreactive polymeric microsphere with uniform sizes could be prepared by using photoinitiator-functionalized macro-RAFT agents under purple light irradiation. Photoreactive polymeric microspheres allowed photografting polymerizations under UV light irradiation, and we further demonstrated the broad scope of this method by photografting acrylamide, acrylic, and methacrylic monomers. Finally, carboxyl-functionalized polymeric microspheres with an exceptional high number of carboxyl groups were successfully prepared by this technique, which permitted extensive surface bioconjugation of model proteins (e.g., streptavidin). This method should expand the capabilities of RAFT dispersion polymerization to afford diverse surface-functional polymeric microspheres for some specific applications.

Expanding the Scope of Polymerization-Induced Self-Assembly: Recent Advances and New Horizons

Over the past decade or so, polymerization-induced self-assembly (PISA) has become a versatile method for rational preparation of concentrated block copolymer nanoparticles with a diverse set of morphologies. Much of the PISA literature has focused on the preparation of well-defined linear block copolymers by using linear macromolecular chain transfer agents (macro-CTAs) with high chain transfer constants. In this review, a recent process is highlighted from an unusual angle that has expanded the scope of PISA including i) synthesis of block copolymers with nonlinear architectures (e.g., star block copolymer, branched block copolymer) by PISA, ii) in situ synthesis of blends of polymers by PISA, and iii) utilization of macro-CTAs with low chain transfer constants in PISA. By highlighting these important examples, new insights into the research of PISA and future impact these methods will have on polymer and colloid synthesis are provided.

The in situ “grafting from” approach for the synthesis of polymer brushes on upconversion nanoparticles via NIR-mediated RAFT polymerization

Through NIR-mediated RAFT polymerization, surface growth of polymer brushes on UCNPs was realized based on an efficient in situ ligand exchange.

One-pot synthesis and aqueous solution properties of pH-responsive schizophrenic diblock copolymer nanoparticles prepared via RAFT aqueous dispersion polymerization

Well-defined doubly pH-responsive schizophrenic diblock copolymer nanoparticles with tunable isoelectric points are prepared via RAFT aqueous dispersion polymerization using an efficient one-pot protocol.

Light-intensity switch enabled nonsynchronous growth of fluorinated raspberry-like nanoparticles

Raspberry-like (RB) nanoparticles hold potential for diverse applications due to their hierarchical morphology. Here we developed a novel tandem synthetic approach of nonsynchronous growth based on photo-mediated reversible-deactivation radical polymerization, enabling simple, efficient and bottom-up synthesis of RB nanoparticles of uniform sizes at quantitative conversions of fluorinated monomers. Chain transfer agents of different chain lengths, concentrations and chemical compositions were varied to tune the diameter of RB particles. Importantly, fluorinated RB nanoparticles obtained with this method allow facile post modifications via both covalent bond formation and intermolecular physical interactions without disrupting the RB morphology. The facile nature of this method and versatility of the obtained fluorinated RB materials open new opportunities for the development of functional materials using nanoparticles.

Fluorous-Core Nanoparticle-Embedded Hydrogel Synthesized via Tandem Photo-Controlled Radical Polymerization: Facilitating the Separation of Perfluorinated Alkyl Substances from Water

Per- and polyfluorinated alkyl substances (PFASs) are broadly used as surfactants and water/oil repellents for many decades. However, they are toxic, environmental persistence, and widely detected in water sources. In this work, we developed a fluorous-core nanoparticle-embedded hydrogel (FCH) synthesized by the metal-free tandem photocontrolled radical polymerization under visible-light irradiation. With the FCH material, the scope of absorbable PFASs has been expanded to neutral, anionic, cationic and zwitterionic PFASs with the same adsorbent for the first time. The fluorous nanoparticles exhibited strong and selective affinity toward PFASs without being dramatically influenced by pH levels and background ions, enabling efficient removing of PFASs at high to environmentally relevant concentrations (10 mg/L to 1 μg/L). Furthermore, the FCH network has shown good mechanical performance, facilitating the separation, regeneration, and recycling of adsorbent for multiple runs. These results demonstrate the promise of the FCH material for PFASs separation and adsorbent recycling toward sustainable environment.

Thermoresponsive Block Copolymer Vesicles by Visible Light-Initiated Seeded Polymerization-Induced Self-Assembly for Temperature-Regulated Enzymatic Nanoreactors

Block copolymer vesicles loaded with active compounds have been employed as decent candidates to mimic complex biological systems that attract considerable interest in different research communities. We herein report a visible light-initiated seeded reversible addition-fragmentation chain transfer (RAFT)-mediated polymerization-induced self-assembly (PISA) for in situ preparation of enzyme-loaded cross-linked block copolymer vesicles without compromising the bioactivity. Permeability of the vesicular membrane can be regulated through changing the solution temperature, allowing further control over the enzymatic reaction rate of enzyme-loaded vesicles. Finally, non-cross-linked thermoresponsive block copolymer vesicles that can transform into worm-like micelles at low temperature are also prepared by this method, allowing the release of bimacromolecules from the vesicles under mild conditions.

Exploring the Upper Size Limit for Sterically Stabilized Diblock Copolymer Nanoparticles Prepared by Polymerization-Induced Self-Assembly in Non-Polar Media

Reversible addition-fragmentation chain transfer (RAFT) dispersion polymerization of benzyl methacrylate is used to prepare a series of well-defined poly(stearyl methacrylate)-poly(benzyl methacrylate) (PSMA-PBzMA) diblock copolymer nanoparticles in mineral oil at 90 °C. A relatively long PSMA54 precursor acts as a steric stabilizer block and also ensures that only kinetically trapped spheres are obtained, regardless of the target degree of polymerization (DP) for the core-forming PBzMA block. This polymerization-induced self-assembly (PISA) formulation provides good control over the particle size distribution over a wide size range (24-459 nm diameter). 1H NMR spectroscopy studies confirm that high monomer conversions (≥96%) are obtained for all PISA syntheses while transmission electron microscopy and dynamic light scattering analyses show well-defined spheres with a power-law relationship between the target PBzMA DP and the mean particle diameter. Gel permeation chromatography studies indicate a gradual loss of control over the molecular weight distribution as higher DPs are targeted, but well-defined morphologies and narrow particle size distributions can be obtained for PBzMA DPs up to 3500, which corresponds to an upper particle size limit of 459 nm. Thus, these are among the largest well-defined spheres with reasonably narrow size distributions (standard deviation ≤20%) produced by any PISA formulation. Such large spheres serve as model sterically stabilized particles for analytical centrifugation studies.

Polymerization techniques in polymerization-induced self-assembly (PISA)

The development of controlled/“living” polymerization greatly stimulated the prosperity of the fabrication and application of block copolymer nano-objects.

Photoregulated reversible addition–fragmentation chain transfer (RAFT) polymerization

Different strategies on photoregulated RAFT polymerization are developed. This minireview summarizes recent advances in photoregulated RAFT polymerization and its applications.

Uncontrolled polymerization that occurred during photoinitiated RAFT dispersion polymerization of acrylic monomers promotes the formation of uniform raspberry-like polymer particles

Uniform raspberry-like polymer particles are prepared by a different type of photoinitiated RAFT dispersion polymerization.

100th Anniversary of Macromolecular Science Viewpoint: Heterogenous Reversible Deactivation Radical Polymerization at Room Temperature. Recent Advances and Future Opportunities

Heterogenous reversible deactivation radical polymerization (RDRP) has become an important method for the preparation of a diverse set of well-defined polymer materials in dispersed systems. Conducting heterogeneous RDRP at room temperature seems to be a minor adjustment in polymerization technique but this will lead to a great opportunity for functional polymer synthesis, developing of interesting heterogeneous RDRP systems, and better mechanistic insights into heterogeneous RDRP. In this Viewpoint, we highlight some recent advances of room-temperature heterogeneous RDRP that are challenging to achieve via traditional thermally initiated heterogeneous RDRP. We hope that this Viewpoint can provide some inspiration for both experts in this field and new comers, as well as nonexperts who are interested in preparing their own polymer materials by conducting room-temperature heterogeneous RDRP.